M/o completed scheme finishing and furnishing i/c T.C. etc. complete at Vikas Sadan.

Centering and shuttering including strutting, propping etc. and removal of form work for : (a) Foundations, footings, bases for columns

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) : (a) 25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

Providing and fixing Ist quality wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of size 200 x1000 m as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supplying & Fixing SMC/GRP panel tanks for water storage of make Sovisy/ Sintex/ Neerco as confirming with IS:14399- 1996 and material to be confirming as per IS:4249-1967 for fire retardant of required capacity of suitable size including fixing and assembling/erecting the tank complete as per direction of Engineer in charge. The tanks to be leak proof after installation and having following specification. (1) Standard SMC panels pressed moulded UV stabilised made from sheet moulding compounds (SMC) composting of glass fibre and formulation of selected resin. (2) The Size of panel should be: Roof Panels: 1000 x 1000 x 75 mm, 500 x 1000 x 75 mm Side panels: 500 x 1000 x 75 mm, 1000 x 1000 x 75 mm, 1000 x 1500 x 75 mm & 1000 x 2000 x 75 mm. Bottom Panels: Convex shape 1000 x 1000 x 75mm, 500 x 1000 x 75 mm Drain Panels: 1000 x 1000 x 75mm at bottom for complete drain of water Manhole panel dia. 700mm lockable lid of hot pressed moulded made out of SMC. (3) Non-Toxic PVC foam sealant gasket sealant tape 75x3mm with high level of resistance to ageing and superior recovery from compression. (4) Fasteners utilized for the panel joints of bolts nuts M12 x 40mm & M12 x 45mm. (5) External reinforcement C channel at every 1-meter of steel with anticorrosive paint and it is tie with top external tie roads (If tank height is more than 1 meter). (6) Internal roof supports should be of FRP/GRP 5mm thick hollow square section. (7) Air-vent dia 50/100mm with mosquito proof mesh insect proof. (8) Aluminium body water level indicator with clear tube type and brass nozzle. (9) Internal FRP ladder with wall mounting arrangement inside. (10) External G.I. ladder with complete fixing arrangement outside. (11) Complete fixing of Inlet/Outlet/overflow/drain should be G.I. flange type. (12) Wireless Fully Automatic Water Level Controller with 4 Level Indicator, Auto On & Auto Off, Auto Mode & Manual Mode with two-year warrantee on site.

Extension of existing SOVISY make SMC panel water tank from size 3000 mm × 2000 mm × 2000 mm to 3000 mm × 2000 mm × 3000 mm, including dismantling/uninstalling of the existing tank, supplying and fixing additional SMC panels, and reassembling the tank to the required dimensions. The work shall include providing and fixing non-toxic PVC foam gasket sealing tape/sealant between panel joints to ensure complete water tightness. The SMC panels shall be standard pressed-moulded, UV-stabilized panels manufactured from Sheet Moulding Compound (SMC) consisting of glass fibre reinforcement and selected resin formulations. The item shall also include making all necessary openings/holes for inlet, outlet, overflow, drain, vent, and other pipe connections, as required, and sealing/closing any redundant openings to make the tank fully functional. The work includes all labour, tools, tackles, accessories, fittings, testing, commissioning, etc. complete as per direction of engineer-in-charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: (a)Two or more coats on new work