Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.5 LAccepted-AOC 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NEW DELHI | DELHI | DELHI | 110006 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹36.9 L+₹32,826.46 (0.90%)Rejected-Finance 1 225 5 6 SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | L2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | L3₹37.2 L+₹61,363 (1.68%)Rejected-Finance RZ 212F D BLOCK RAJ NAGAR PART II PALAM COLONY NEW DELHI 110077 | SOUTH WEST | DELHI | 110077 | L3 | Rejected-Finance BEING NOT LOWEST | |
| 4 | L4₹37.7 L+₹1.1 L (3.04%)Rejected-Finance A 303 VEENA CGHS LTD PLOT NO 5D SECTOR 22 DWARKA NEW DELHI 110077 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110077 | L4 | Rejected-Finance BEING NOT LOWEST | |
| 5 | L5₹38.7 L+₹2.1 L (5.83%)Rejected-Finance NO 9 BYRAVESHWARA INDUSTRIAL ESTATE ANDRAHALLI MAIN ROAD NEAR PEENYA 2ND STAGE BENGALURU 560 091 | BENGALURU URBAN | KARNATAKA | 560091 | L5 | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹49.3 L
EMD Value
₹98,540
Closing Date
11 Nov 2023, 6:00 pmClosed
AJIT KUMAR,IDSE
GE U ELECTRIC SUPPLY,DELHI CANTT
SPL REPAIR TO PERIMETER /STREET LIGHTS LIGHTS WITH POLES AND CONNECTED ITEMS AT COD DEPOT AREA AND PROVN OF THREE PHASE ELECTRIC SUPPLY FROM LT PANEL TO MAIN ADM BLOCK OF 226 COY ASC (SUP) TYPE G IN THE AREA OF AGE (U) E/S NO 1 UNDER GE (U) E/S D
2023_MES_619318_1
GE ELECT/D-61/2023-2024
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE U ELECTRIC SUPPLY
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE U ELECTRIC SUPPLY
₹98,540
Yes
9 Dec 2023
16 Oct 2023
13 Nov 2023
16 Oct 2023
11 Nov 2023
30 Oct 2023
Amount
Dismantling of old unsv LT concrete pole and depositing in low line area complete all as specified and directed
Excavation in trenches not exceeding 1.5 meters wide & not exceeding 1.5 meters in depth for laying of cable and getting out in soft/loose soil including trimming the sides forming bottom surfaces to required level complete all as specified and as directed by Engineer-in-charge.
Returning, filling in including spreading leveling, watering and well ramming in layers not exceeding 25 cms thick in each layer of soil complete all as specified.
Removing excavated material to a distance n.exc 50 meters and depositing where directed at a level not exceeding 1.5 mtrs above the starting point all as specified and directed by Engineer-in-Charge.
M&L for sand cushisioning to under ground cable with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable complete all as specified and directed.
M&L for brick protection witburnt clay sub class 'B' bricks laid dry flat over cable in trenches complete all as specified.
M/L for HDPE 50 mm pipe suitable for 5 kgf/cm 2 working pressurewith all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed .
Supplying, laying, jointing testing and connecting in replacement XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, IS 7098 marked, suitable for LT 1100 Volt system, laid in Cable Ducts fixed to Panel, including jointing & testing complete all as specified and directed of following sizes:-
16 Sqmm 4 Core
25 Sqmm 4 Core
70 Sqmm 3.5 Core
Supply and fix in replacement of Energy saving, environmental friendly, long life, LED street light made up of pressure dia cast aluminium housing with high efficient lighting source with toughened glass having IP66 protection LED street light of capacity 70 Watt complete all as specified.
Supply and fix in replacement of Energy saving, environmental friendly, long life, LED street light made up of pressure dia cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seprate driver compartment with IP 66 protection LED street light of capacity 90 Watt complete all as specified.
M&L in replacement of street light bracket made out of 25/32 mm dia GI pipe medium grade upto 1.5 mtr long including bending, welding ,drilling holes as required and fixing with flat iron clamps 25x 5 mm thick (02 Nos) with suitable nut, bolts and washers to steel tubular /concrete poles/wall complete all as specified and as directed.
S&F in replacement of KIOSK box weather proof made out of PVC, one piece moulded SMC base and out door pole mounted hinged door size 333 x 233 x 120 mm out side and 300 x 200 x 105mm inside dimensions comprising of aluminum bus bar 4 strips for 3 phase and neutral 63 Amp, FI clamps 20x3 mm with necessary MS nuts bolts and washers including embossing/painting of Danger notice of size not less than 10 cm x 7.5cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body complete all as directed by Engineer-in-Charge.
M&L for Boring of hole under road/pavement/hard standing or any other situation by mannual means and suitable for passing of GI pipe 40/80 mm bore and making good both ends all specified and directed
Supply & installing steel tubular swaged poles type 410 SP-31 (9 mtr long) of approx wt.147 kg conforming to IS 2713 (Part-II) including excavation, earth work, PCC foundation, base plate,PCC coping,GI pipe for cable protection etc. and GI bracket for fitting mounting, complete all as per manufacturer's instructions and as specified and as directed by E-in-charge. NOTE:- The unit rate in this item is deemed to be included the cost of exacavation and earth work in any type of soil,PCC foundation 1:4:8 type D-2 , PCC coping 1:2:4 type B-1 as in steel tubular pole . The steel pole shall be painted by bituminious paint total length inside and up to planting depth outside and remaining portion of pole painted with two coat of aluminium paint over a coat of red oxide complete all as specified and directed.
Supply and fix in replacement of Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 LED flood light suitable for high lighiting architectural façade and general purpose lighiting of capacity 200 Watt LED complete all as specified.
Supply drawing, connecting and testing in replacement 3 core, 1.5 Sqmm PVC insulated and PVC round sheathed copper conductor (flexible ) industurial cable, 1100 Volts conforming to IS 694 in steel tubular poles from KIOSK box to street light fitting including providing suitable copper lugs all as specified and directed by Engr-in-charge.
S&F Timer switches astro type in having longitude and latitude of Indian cities in memory 415 V three phase 20 Amp rating with 20 Amps, 415 Volts, three pole contactor fitted inside factory made 2mm thick steel enclosure duly powder coated paint complete all as specified and directed.
Boring of hole 2m deep in soil for under-reamed pipes and getting out and disposal of soil n.nexc.50m upto 200mm bore complete.
Material and Labour for GI Tubes of size 50mm dia medium grade,galvanised with all fitting,laid in trenches for protection of cable in road/drain crossing complete all as specified and directed.
Supplying, laying, jointing testing and connecting of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable of size 120sqmm 3.5 core (heavy duty) with multistranded aluminum conductors, IS 7098 marked, suitable for LT 1100 Volt system, laid in trenches fixed to pole, including jointing & testing complete all as specified and directed of following sizes:- Note :- Excavation, earth work ,cable protection , sand fillings , cable joint shall be measured and paid separately under respective items of schedule.
Supply and fix Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 LED flood light suitable for high lighiting architectural façade and general purpose lighiting of capacity 120 Watt LED complete all as specified.
Note : contractor should procure and provide 50 % of the material as listed above within 15 days of the placing of work order and shall be verified by the Eng-in-charge
M P TYAGI ENGINEERS AND CONTRACTORS
MV Engineers And Contractors
Ridhi engineers and builders
Vijay Electricals
Rajindera Enterprises
mayur enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .