REPAIRS TO JOINERY ROOF PLUMBING AND SANITARY INCLUDING CONNECTED WORKS TO OTM ACCN IN THE AREA OF AGE BR I UNDER GE WEST DELHI CANTT 10

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area n.exc 1.5 sqm each complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm but n.exc. 4.00 sqm each complete all as specified & directed.

Taking down shutters of any description area exc 1.00 Sqm but n.exc 2.00 sqm each complete all as specified & directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening and making good disturbed surfaces of jambs by matching with existing treatment complete all as specified & directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site complete all as specified & directed.

S&F MS Framed work as in doors frame or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified & directed.

S&F 35mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers etc. sizes of members of shutter sas specified in SSR Part I, Section 8, Clause 8.24(a) all as specified and directed.

S&F 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); all as specified and directed.

S&F steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bar and complete all as specified and directed.

All as per item 9 above but without glazing bars.

S&F steel ventilator with top hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bar and complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified

S&F powder coated aluminum frames for door/ windows/ventilators/partitions with one or more rebates including jointing cleats for fixing etc complete all as specified.

S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) tower bold 100mm (02 No) complete all as specified

S&F Anodised aluminium powder coated door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing, aluminium handles 2 Nos 150mm long in each shutter, hinges 03 Nos 100mm long in each shutter, Tower bolt 02 Nos 150mm long in each shutter, anodised aluminum snap beading screws etc. complete all as specifiedNote:-(Glass for doors and windows under this item shall be measured and paid seperately under respective item).

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified & directed.

S&F 150mm long extruded aluminium handles, cast type, anodised complete all as specified & directed.

S&F 100mm stainless steel butt hinges, medium weight fixed by welding or drilling to MS frames or wooden chowkhats complete all as specified & directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) complete all as specified & directed.

S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) including wooden/steel beading as reqd at site complete all as specified & directed.

Hacking out broken glasses (any thickness, size, quality or description) from wooden/steel/aluminium frames complete all as specified & directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each pane complete all as specified & directed. (Note : The Glass panes will be fixed up to four storey building from external side.)

S&F 4mm thick figured glass ,pin head type and glazing with oil putty, pins spring clips etc in square n.exc 0.5 Sq m in each pane complete all as specified & directed.

S&F 4.80 mm thick sheet glass ordinary quality fixed in aluminium/woden joinery complete all as specified & directed.

Repairs to Aluminium Doors including taking down the shutter n.exc 2.00 Sqm each for repairs including replacement of defective parts of frame/shutters i.e. cleats, angle, scruew, clips, gasket, rubber beadings, channels etc and refixing in the same opening complete all as specified and directed. (Note : certain builders hardware such as door closer, floor spring, door stopper, tower boldt, sliding bolt and handle, mortice lock and glass if replaced will be paid seperately in respective items).

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified & directed.

S&F in repair Mortice lock brass vertical type size 100 mm with 4 Levers complete all as specified and directed.

S&F in repair aluminium body (extruded section) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified & directed.

S&F in repair for floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring Overall length of cover plate 140 mm all as specified & directed.

Refixing the shutter after taking down in any opening after reparing the shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified & directed .

S&F in repair MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed .

S&F 25 mm dia stainless steel curtain rods including two powder coted ms brackets for each pices of rod (each piece length exc 1.00m but not exc 1.80m) with full round or half round fixing nuts (bracket holders) threaded/unthreaded as required all as specified and directed .

S&F decorative stainless steel drapery rod's side bulb suitble for 25 mm dia or as required all as specified and directed.

Taking down rolling shutter push pull or manual type and re-fixing the same in position after necessary repairs such as cleaning , replacement of rusted nuts and bolts and necessary repair/replacement to dislocated curtain/laths with required welding/ grinding/resecuring/punching and making good any damage to the existing shutters of any size complete all as specified and directed.

Taking down rolling shutter gear operated type with lever gear box and crank handle and re-fixing the same in position after necessary repairs such as cleaning , greasing, replacement of rusted nuts and bolts and necessary repair/replacement to dislocated curtain laths with required welding /grinding/resecuring/punching and making good any damage to the existing shutters of any size complete all as specified and directed.

Taking down existing unserviceable rolling shutter complete of any size and any type and removing from site complete all as specified and directed.

S & F,rolling shutter with thickness of laths 1.25 mm including top cover, anchoring rod, hasp and staple and one shop coat of primer and erect with gear operated type with bevel gear box and crank handle, with 1.25 mm thick laths all as specified and directed.

S & F,rolling shutter with thickness of laths 1.25 mm including top cover, anchoring rod, hasp and staple and one shop coat of primer and erection in position as indication complete push or pull type complete all as specified and directed.

S & F in repairs suitable size steel ball bearing for smooth functioning of old rolling shutter complete all as specified and directed.

S & F in repairs steel spring of suitable size for old rolling shutter and including smooth functioning and removal of old steel spring from site all as directed.

S & F in repairs in rolling shutters top cover fabricated to required shape and size made out of 1.00 mm (20 gauge) thick M S sheet including necessary fixtures and fastening with one shop coat of redoxide primer complete all as directed.

S & F in repairs Gear box assembly for rolling shutter including rod, required nuts, bolts, cleats, crank handle etc. complete of standard make and fixed in position including one coat of primer including removal of old gear box assembly and other accessories all as specified and directed.

M&L for one coats of synethetic enamel paint(ordinary tint) including preparation of old steel surfaces of any description,over 10cm in width or girth,not otherwise described complete all as specified and directed.

M&L for preparation of new steel or iron surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L for preparation of new wooden surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified.

M & L for 15 mm thick rendering in cement mortar 1:4 on concrete or brick surfaces finished even and fair, complete all as specified.

M & L for 15 mm thick rendering in cement mortar 1:6 on concrete or brick surfaces finished even and fair, complete all as specified.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of cement based paint white or tinted ,complete all as specified.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying three coats of white lime wash, complete all as specified.

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper including priming the wall surfaces complete all as specified.

M&L 18/19 mm thick Prelaminated particle board in repair work (kitchen drawer and cup board) exterior grade, prelaminated one side with decorative choice lamination, & other side balancing white lamination, fixed with screws to timber frame work including dismantling old partile board complete all as specified and directed

Refixing of serviiceable prelaminated particle board 18/19mm thick obtained after carefully dismantling from cupboards or kitchen cabinet including dismantling old particle board all as specified and directed.

M&L in repair Plain fillets.square, rectangular or triangular in section exc. 6 sqcm & n. exc. 13 sqcm, wrought, secured with nails or brads as specified.

S&F in repairs megnatic catches, and brass body and striking plate including letting in and fixed complete complete all as specified and directed.

S&F in repair 40 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed.

Extra over rates of block board or veenered partical board 18/19 mm for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

S&F in repairs aluminium anodised 100mm long Hasp and staple, safety type, aluminium hinge pin including bolt to hinge plate and fixed with screws

S&F for 40mm dia, cupboard knobs fixed with nut, screw and washer of powder coted MS, bright finished for almirah and cup board complete all as specified & directed.

Taking up or down 15 mm bore dia steel tubing and connections complete all as spd and directed.

All as per item 61 above, but 20 mm bore dia.

All asper item 61 above but 25 or 32mm bore dia

M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor complete all as spd and directed.

All as per item 64 above but 20 mm bore tubing.

All as per item 64 above but 25 mm bore tubing.

S&F in repairs of 15mm bore size PTMT angle stop valve complete all as specified.

S&F in repair fancy type Pillar taps of PTMT swan neck patern any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as spd and directed.

S&F in repairs of 15mm bore size PTMT bib tap fancy type complete all as specified.

S & F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white or coloured with inlet, ball valve float and handle including brackets

S&F in repair rotational moulded polythelene water storage tank (cylindrical, vertical with closed top) 500 ltrs capacity (ISI Marked) incl necessary fitting like tank cover, nipple, socket etc, hoisted and fixed in position complete all as spd & directed.

S&F in repair rotational moulded polythelene water storage tank (cylindrical, vertical with closed top) 1000 ltrs capacity (ISI Marked) incl necessary fitting like tank cover, nipple, socket etc, hoisted and fixed in position complete all as spd & directed.

Disconnecting existing tanks for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and reconnecting and re-fixing in position. upto 500 liter complete all as specified and as directed.

Disconnecting existing tanks for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and reconnecting and re-fixing in position. exc 500 liter up to 1000 liters as directed .

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms/)

S&F in repair 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms/)

S&F in repair PVC water storage tank lid with locking arrangement complete for tank capacity 1000ltrs all as specified & directed.

S&F in repair PVC water storage tank lid with locking arrangement complete for tank capacity 500 ltrs all as specified & directed .

S&F in repair vitreous china white european type WC with "P" or "S" trap including connection to drain pipes, traps and PVC flushing cistern with pipe 32mm dia PVC flush pipe including PVC seat cover and fixing bolts complete all as specified and directed.

S&F in repair Vitreous China urinals, Half stall type (back or corner wall type), white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing brackets, flush pipe, grating and Union for discharge pipe and waste pipe complete all as spd & directed by Engr-in-Charge.

S&F in repair vitreous chinaware wash hand basin (WHB), white, size 550x400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete all as spd & directed .

S&F in repair Vitreous China wash basin, white, Oval shape, under countered size as per existing model including coupling, waste pipe fix in granite top complete as specified.

S&F in repair vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair size 580x440mm white with 'P' or 'S' trap complete all as specified.

S&F in repairs PVC connection 600mm long with 2 Nos PTMT check nuts suitable for 15mm bore of pipe with washer complete all as specified.

S&F in repairs 32mm bore and 75cm long PVC waste pipe for WHB complete all as specified.

S&F in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model all as specified & directed by Engr-in-Charge

S&F in repair Chromium plated brass long body bib tap fancy type 15 mm bore dia all as specified & directed.

S&F in repair cast copper alloy, chromium plated Health faucet body with pipe complete all as specified & directed.

S&F in repair chromium plated floor trap grating complete all as specified & directed .

S&F in repair 100mm bore cast iron soil waste and vent pipe (Cast type) in any length with or without ears with cement joints fixed to walls or laid in floor etc complete complete all as specified and directed.

S&F in repair 100mm Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed

S&F in repair for 100mm bore dia cast iron Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

S&F in repair Brass CP Wall mixer non telephonic type for mixing hot & cold water for Shower screwed down for 15mm bore iron pipe or ferrul.

M&L for Marble work table rubbed and polished bothe face for urinal partition /wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F Granite (of any type) 20mm thick machine cut, in slabs, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing cutting of holes for taps, WHB, gas pipe etc. complete all as specified and directed.

S&F in repair Mild steel peg stays for steel window etc as per sample all as spd & directed.

S&F in repair Mild steel handles for steel window etc as per sample.all as spd & directed.

M&L for flush pointing to bricks laid flat or brick tiles in pavings /roof in C:M 1:3 mixec with 5% crude oil by weight of cement including racking out of existing joints or brick tiles complete all as specified and directed

M&L 40mm thick brick tiles laid on 15mm thic cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed including dismantling old brick tiles complete all as specified and directed.

S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions complete all as spd & directed including dismantling old false ceiling any type complete all as specified and directed.

S&F Solid PVC Wall Lining/penelling consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall paneling at distance of exceeding 30cm centre tor centre on verticl and at every end or joint of sheet in horizontal/vertical cinclusive of fixing on to wall to make PVC Frame as per specification and drawing including dismantling existing wall penelling/boarding any type complete all as specified and directed.

M&L for 6mm thick asbestos cement corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts including dismantling existing damaged sheet complete all as specified and directed .

M&L for 6mm thick asbestos cement two piece adjustable serrated ridge suitable for corrugated or semi-corrugated AC sheets fixed with 'L'-type or 'J'-type or cranked hook bolts including dismantling existing damaged ridge complete all as specified and directed .

M&L for water proofing treatment to roof surface with APP water proofing membrane 3mm thick & weighing not less than 3.0 kg/sqm of approved make black finish & reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat of bitumen primer conforming to IS-3384 @ 0.4 Ltr/sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing as per manufacturer's instructions over and including 10mm thick rendering 1:3 on roof surface including taking down existing roof treatment any type complete all as specified and directed. Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make/manufacturer. 3. The APP Membrane to be inserted in the parapet wall/wall by cutting chases of atleast 65X50mm size & making good in CM 1:3. complete all as specified and directed.

M&L for 4mm thick ACP sheet (Aluminium composite Panel sheet) fixed in aluminium partition/doors/window work including necessary jointing cleats, rubber beading, clips,etc complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 143787.50 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.

M/S Yamin

B. S BUILDERS