Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.7 LAccepted-AOC VPO SARNA STATION PATHANKOT 145 025 PB | PATHANKOT | PUNJAB | 145025 | ₹19.7 L | L1 | Accepted-AOC BEING LOWEST BIDDER |
| 2 | L2₹23.4 LRejected-Finance | ₹23.4 L | L2 | Rejected-Finance NOT BEING L1 |
| 3 | L3₹23.4 LRejected-Finance 0 SALEHPUR KOTLA BSR ROAD PO DAHANA HAPUR HAPUR UTTAR PRADESH 245101 | HAPUR | UTTAR PRADESH | 245101 | ₹23.4 L | L3 | Rejected-Finance NOT BEING L1 |
| 4 | L4₹23.8 LRejected-Finance | ₹23.8 L | L4 | Rejected-Finance NOT BEING L1 |
| 5 | L5₹28.0 LRejected-Finance 210 C RAM DASS KA HATA SADAR CANTT LUCKNOW UP PIN 226002 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226002 | ₹28.0 L | L5 | Rejected-Finance NOT BEING L1 |
| Sl No | Description | Qty | Unit | H C CONSTRUCTION L4 | SUBASH MAHAJAN L1 | M/s A S Associates L3 | M/S PRATAP BUILDERS L5 | M/S PAVA ENGINEERS L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L preparation of old painted surface of any description over 10cm width or girth of concrete/plastered surface and applying one coat of synthetic enamel paint on signal square, wind sock at any ht etc complete all as specified and directed. | 450 | Sqm | 48 ₹21,600 | 54.55 ₹24,547.50 | 45 ₹20,250 | 55 ₹24,750 | 60 ₹27,000 |
| 2.00 | M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) line lazer 5900 of M/s Graco or equivalent as approved by GE complete all as specified and as directed by the Engineer-in-charge. Make: Apcotrack manufactured by Asian paints/ Shalimar paints guide line of Berger or equivalent make as specified as approved by GE. Note:- Thickness of paint shall be minimum 40 micron
(Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047. | 25,500 | Sqm | 64 ₹16.3 L | 43.88 ₹11.2 L | 65 ₹16.6 L | 76 ₹19.4 L | 65 ₹16.6 L |
| 3.00 | M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces not exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) line lazer 5900 of M/s Graco or equivalent as approved by GE complete all as specified and as directed by the Engineer-in-charge. Make: Apcotrack manufactured by Asian paints/ guide line of Berger or equivalent make as specified as approved by GE. Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047. | 2,400 | Per 10 Rm | 70 ₹1.7 L | 64 ₹1.5 L | 65 ₹1.6 L | 100 ₹2.4 L | 90 ₹2.2 L |
| 4.00 | M&L for complete removal of existing thermoplastic / water base paint layer (any number of layers) over concrete, black bituminous pavements surfaces by mechanial means including removal & cleaning etc complete all as specified and directed by Engr-in-charge. | 400 | Sqm | 10 ₹4,000 | 15 ₹6,000 | 10 ₹4,000 | 12 ₹4,800 | 75 ₹30,000 |
| 5.00 | M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with two coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) line lazer 5900 of M/s Graco or equivalent as approved by GE complete all as specified and as directed by the Engineer-in-charge. Make: Apcotrack manufactured by Asian paints/ Shalimar paints guide line of Berger or equivalent make as specified as approved by GE. Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047. | 400 | Sqm | 75 ₹30,000 | 70 ₹28,000 | 80 ₹32,000 | 92 ₹36,800 | 100 ₹40,000 |
| 6.00 | Taking down cement plaster from brick walls/stone walls etc of any description including racking out joints, hacking for key scrubbing down with water etc complete all as specified. | 100 | Sqm | 50 ₹5,000 | 20 ₹2,000 | 30 ₹3,000 | 80 ₹8,000 | 20 ₹2,000 |
| 7.00 | M&L rendering 10mm thick cment mortar (1:4) on concrete surfaces,/brick of drain channel finished even and smooth without using extra cement on concrete/brick surface , complete all as specified and directed | 100 | Sqm | 180 ₹18,000 | 280 ₹28,000 | 200 ₹20,000 | 180 ₹18,000 | 220 ₹22,000 |
| 8.00 | Demolition of Brick work or stone/ boulder masonry,built in cement mortar of any specification and in any position complete all as specified. | 15 | Cum | 500 ₹7,500 | 150 ₹2,250 | 500 ₹7,500 | 650 ₹9,750 | 300 ₹4,500 |
| 9.00 | M/ L for brick work with sub class 'B' brick (using old size bricks) straight or curved on plane exc 6m mean radius built in CM 1:6 complete all as specified and directed. | 10 | Cum | 5,000 ₹50,000 | 6,900 ₹69,000 | 4,800 ₹48,000 | 4,700 ₹47,000 | 4,000 ₹40,000 |
| 10.00 | All asper item No 09 above but except bricks complete all as specified and directed. | 5 | Cum | 1,200 ₹6,000 | 2,800 ₹14,000 | 1,500 ₹7,500 | 1,000 ₹5,000 | 1,000 ₹5,000 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
26 Jul 2023, 6:00 pmClosed
GE (AF) BKT
GE (AF) BKT, LUCKNOW
ROAD MARKING WATER BASED PAINT, TAXI TRACK, DISPERSAL LINKS AND CONNECTING B/R REPAIRS AS PER FIELD REQUIREMENT AT AF STN BKT
2023_MES_589905_3
8702/BKT/E8
Open Tender
Civil Works
180 days
GE (AF) BKT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (AF) BKT
₹60,000
Yes
24 Jun 2026
7 Jul 2023
28 Jul 2023
7 Jul 2023
26 Jul 2023
14 Jul 2023
Amount
M&L preparation of old painted surface of any description over 10cm width or girth of concrete/plastered surface and applying one coat of synthetic enamel paint on signal square, wind sock at any ht etc complete all as specified and directed.
M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) line lazer 5900 of M/s Graco or equivalent as approved by GE complete all as specified and as directed by the Engineer-in-charge. Make: Apcotrack manufactured by Asian paints/ Shalimar paints guide line of Berger or equivalent make as specified as approved by GE. Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047.
M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces not exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) line lazer 5900 of M/s Graco or equivalent as approved by GE complete all as specified and as directed by the Engineer-in-charge. Make: Apcotrack manufactured by Asian paints/ guide line of Berger or equivalent make as specified as approved by GE. Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047.
M&L for complete removal of existing thermoplastic / water base paint layer (any number of layers) over concrete, black bituminous pavements surfaces by mechanial means including removal & cleaning etc complete all as specified and directed by Engr-in-charge.
M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with two coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) line lazer 5900 of M/s Graco or equivalent as approved by GE complete all as specified and as directed by the Engineer-in-charge. Make: Apcotrack manufactured by Asian paints/ Shalimar paints guide line of Berger or equivalent make as specified as approved by GE. Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047.
Taking down cement plaster from brick walls/stone walls etc of any description including racking out joints, hacking for key scrubbing down with water etc complete all as specified.
M&L rendering 10mm thick cment mortar (1:4) on concrete surfaces,/brick of drain channel finished even and smooth without using extra cement on concrete/brick surface , complete all as specified and directed
Demolition of Brick work or stone/ boulder masonry,built in cement mortar of any specification and in any position complete all as specified.
M/ L for brick work with sub class 'B' brick (using old size bricks) straight or curved on plane exc 6m mean radius built in CM 1:6 complete all as specified and directed.
All asper item No 09 above but except bricks complete all as specified and directed.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces finished the suface smooth with using extra cenment complete all as specified and directed.
Demolition of Cement Concrete unreinforced of any description and any position not otherwise specifically provided for and removing of rubbish from permises complete all as specified and directed.
M/L Cement concrete in surface channels and drains, or any other type using cement concrete of type B0 (1:2:4) using 20mm graded stone aggregate and surface finished even and smooth without using extra cement all as specified and directed.
M/L Cement concrete as in cills, steps; coping seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings copings, kneelers, apex stones, bed plates,Type B0 1:2:4 (12.5mm graded graded graded) complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.
M&L for Duracrete Chequred tiles 300mm x 300mm x 10mm thick, heavy duty tiles ; laid over and including 25 mm thick PCC 1:2:4 Type B1 using 20mm graded stone aggregate and 15 mm thick screed bed in cement mortar 1:6 set jointed and pointed in neat cement slurry with white/grey cement mixed with admixture or pigment to match the shade in floors, and cut and polished complete all as specified and directed.
M/S PAVA ENGINEERS
M/s A S Associates
H C CONSTRUCTION
M/S PRATAP BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid