Arresting water seepage at Apron feeder floor at WT-1 & WT-2 at CHP of BTPS

Arresting water seepage at Apron feeder floor at WT-1 & WT-2 at CHP of BTPS

Removal of existing deboned loose laster/spalled concrete/ delaminated cover concrete on by entle chipping untill the hard concrete is exposed, followed by cleaning the surface with air and water jet,...

Drilling 12 mm dia 150 mm deep in to the concrete surface where ever required, cleaning the holes by air and water jet fixing the non return GI/Flexible nozle, to inject polyeurathene grout , the cost...

Providing and injecting one component polyurethene injection foam of any approved brand likes of to stop small to mid volume water ingress and fill the cavities and crete the barrier for successive re...

Providing and injecting microfine cement added with expansive agent the cost is inclusive of all men, materials machinery scaffolding transportation etc.

Providing and injecting epoxy resin pressure grouting to concrete structures with low viscicity epoxy grout through yhe pvc nozzle as per standard practice.

Drilling 75 mm diameter drainage holes vertical or inclined in rock /concrete in tunnel by percussion drilling using waggon drill or other suitable drilling equipment including cost of all materials, ...

Providing and fixing PVC pipe of 50 mm dia having perforation of 10% of the surface area cover with 250 GSM geotextile for weep ho;es including cost of all materials, labour , machinary etc complete a...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Eng...