PROVIDING, FIXING AND PLACING FURNITURE AT 2nd FLOOR IN ADMN. BLOCK AT RSPCB, JHALANA DOONGRI, JAIPUR

Amount

Office Table with Side Unit: Main table Size 1800(W)X900(D)X750(H)mm. Top and side panel made up of 36 mm thick three layer pre laminate particle board. Flat edge duly sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. The modesty is 18mm thick three layer pre laminate particle board on both sides. Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function. The all desk should contain adjustable screws is provided at the bottom of the legs for Level adjustment. Grommets (cutouts) is provided on table top for cabling. Grommets is provided with PVC cover.Two drawer pedestals made of 18mm thick Pre laminated Particle board at the right side of table. The sides of drawers and facia made of 18mm thick pre laminated Particle Board. Back of the pedestal made of 18mm thick Pre laminated Particle Board. Pedestal is supported to the table top. Pedestals have 2 drawer 1 for personal and 1 for lateral files. Drawers are provided with full extension telescopic ball bearing slide channels. Pedestal is provided with single central locking system. Side unit size-1140(W)X450(D)X639(H) mm.- Top and side panel made up of 36 mm thick three layer pre laminate particle board.Flat edge duly sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. The modesty(Back) is 18 mm three layer pre laminate particle board on both sides. Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Side unit have two openable shutter & three drawer are provided with full extension telescopic ball bearing slide channels. Three drawer is provided with single central locking system, and open space in it and are made up of 18mm thick pre laminate particle board on both sides. Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Openable double door is fitted with hinges & lock. Openable door unit have one numbers of adjustable shelves. Skirting is made of 18mm thick Pre Laminated Particle Board. All exposed edges are sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function.The all side unit should contain adjustable screws is provided at the bottom of the legs for Level adjustment.The entire table is complete in all respects and made as per specification and as directed by engineer-in-charge.

Revolving Chair For HOD :Supplying and placing in position chair of the following specifications. The cushioned seat assembly shall consists of insert moulded polyurethane foam (density 40 kg/cum,55mm thick) upholstered with foam laminated mesh fabric(290 GSM). The insert moulded foam is assembeled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-52cm, (H)-52.0cm & size of seat shall be (W)-51.0cm x (D)-52.5cm. Armrest are injection moulded with height adjustable. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position locking and seat sliding. Neck rest assembly shall made up of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back it can be adjusted up to 4.5+/- 0.5cm up-down and has regular adjustment of 30 degree +/-2 .The pneumatic height adjustment have an adjustment stroke of 10.0 cm to 15.0cm. The Telescopic bellow assy:- The bellow is 3 piece telescopic type and injection molded in black polypropylene . The pedestal made of die-cast polished aluminium. it fitted with 5 nos twin wheel castor. The size of the pedestal 67.0 cm pitch-centre-dia(74.0 cm with castors). The twin wheel castors are injection moulded in black nylon. Overall dimensions of Chair shall be, Width of Chair - 74.0cm, Depth of Chair - 74.0 cm as measured from pedestal below.The entire chair is complete in all respects and made as per specification and as directed by engineer-in-charge.

Visitor Chair For HOD:The cushioned seat assembly consists of insert moulded polyurethane foam(density 45 kg/cum, 50mm thick) upholstered with foam laminated mesh fabric. the insert moulded foam is assembeled over a load bearing ply of 12mm. The back made up of two piece injection moulded frame with lumber support. The inner frame is upholstered with mesh fabric and mounted on the main assembly. Size of seat (W)-51.0cm x (D)-52.5cm. Armrest made of injection moulded polypropylene.The sled base leg frame welded assembly made from SS 202 square tube of 24x24mm or round tube of 25mm dia with 1.2mm thick with base plate for seat fixing. All the metal parts have free from the dent, burrs and sharpedges removed. The entire chair is complete in all respects and made as per specification and as directed by engineer-in-charge.

Sofa 3 Seater :Size : 1880 x 785 x 730 (L x D x H) Providing three seater sofa, sofa structure duly made with SS pipe 202 grade frame (1.2mm thick) finish, sofa internal structure duly made with pine wood and fix at steel structure with the help of self tapping steel screw, sofa having seat 40 & back 32 medium density foam and all foam duly covered with PU leathrite tapestry/ fabric tapestry, sofa having in bottom four nos. leg of nylon steps for anti-skid on floor.The entire Sofa is complete in all respects and made as per design and as directed by engineer-in-charge.

Office Table with ThreeDrawer Pedestal & Side Unit: Main table Size-1575(W)X750(D)X750(H) mm. The main table of size 1500 x 750 mm with the top surface made out of 25mm thick Particle board with half round shape post forming on front and the rear side with 0.6mm thick laminate pasted on it and the rest of the sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side. This main top rest on one side legs and one side 3 drawer padesal unit .Flat edge duly sealed with1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. The side panel & modesty is 18mm thick pre laminate particle board all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function. The all table should contain adjustable screws is provided at the bottom of the legs for Level adjustment. Grommets (cutouts) is provided on table top for cabling. Grommets is provided with PVC cover. Side unit size-900(W)X450(D)X750(H) mm. Top made up of 25mm thick Particle board with half round shape post forming on front side with 0.6mm thick laminate pasted on it and the rest of three sides edge banded with 1.3mm thick matching colour PVC Edge banding and white balancing laminate on the reverse side.The side panel is 18mm thick pre laminated particle board on both sides all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges.All unit having two hinge door, back and fixed shelves are made up of 18mm thick pre laminated particle board Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. All the PVC edge beading should have press through 200 ° Temperature PUR glue by automatic through feed edge banding machine with corner rounding function. The side unit should contain adjustable screws is provided at the bottom of the legs for Level adjustment. The three drawer pedestal unit size: 725(H)x380(W)x450(D) shall made out of 18mm thick pre- laminated board, having three number of drawer units, the two top units of 6” depth each and the bottom drawer of 15” depth. The front shutters matching with top surface in quarter round post forming on the right and left side and all flat Edge sealed with 1.3mm thick PVC edge banding of approved color pasted with PUR (Polyurethane reactive adhesives) Glue on through-feed edge-banding machine for better bonding of edges. Drawers are provided with full extension telescopic ball bearing slide channels. Pedestal is provided with single central locking system including necessary hard-wares, handle locks etc.The entire table & side unit is complete in all respects and made as per specification and as directed by engineer-in-charge.

Revolving Chair For staff : Supplying and placing in position chair of the following specifications. The cushioned seat assembly shall consists of insert moulded polyurethane foam(density 35 kg/cum, thickness 30mm) upholstered with foam laminated mesh fabric(220 GSM ). The insert moulded foam is assembeled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-48.5cm, (H)-62.0cm & size of seat shall be (W)-51.0cm x (D)- 52.5cm. Armrest Adjustable.The mechanism of chair shall have following features:360 degree revolving type, center tilt mechanism. Neck rest assembly shall made up of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back it can be adjusted up to 4.5+/- 0.5cm up-down and has regular adjustment of 30 degree +/-2 .The pneumatic height adjustment have an adjustment stroke of 10.0 cm to 15.0 cm. The Telescopic bellow assy:- The bellow is 3 piece telescopic type and injection molded in black polypropylene .The pedestal is injection molded in black 30% glass filled Nylon. A 10.5 dia forged bright zine plated M.S. caster pin pressfitted into each prong for holding the castors. The pedestal shall be 700 mm pitchcentre- dia. (750 mm with castors).The twin wheel casters are made of nylon . Overall dimensions of Chair shall be, Width of Chair- 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below.The entire chair is complete in all respects and made as per specification and as directed by engineer-in-charge.

Visitor Chair For Staff: The back & seat is made up of 1.2 cm. thick 1 piece hot pressed plywood upholstered with premium leattheite tapestry/fabric tapestry and Foam(density 32kg/cum, 50mm thick in backrest,50mm thick in seat). The back foam is designed with contoured lumber support for extra comfort. Back Size: 46.0cm.(W) X 50.0cm.(H). SEAT SIZE: 46.0cm.(W) X 45.0cm.(D).The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20+/ 2 for 25% compression. SEAT- BACK CONNECTING SPINE: The seat and back are arrested together with a oval tube of 18x38mm with 1.2mm thick. The arm rest top is of cushion. The chrome plated leg frame welded assembly made from MS Pipe of chrome polished, oval tube of 18x38mm with 1.2mm thick with base plate for seat fixing.The entire chair is complete in all respects and made as per specification and as directed by engineer-in-charge.

Providing and fixing of Workstation Systems A.) 2 seater Face to face overall size: 1320 x 1300 x 1200mm (L x W x H) - 1set each seat size : 1200 x 600 x 750mm (L x W x H) B.) 1 seater linear overall size : 1320 x 650 x 1200mm (L x W x H ) - 4 set each seat size : 1200 x 600 x 750mm (L x W x H) C.) 2 seater linear overall size : 2100 x 650 x 1200mm (L x W x H ) - 1 set each seat size : 960 x 600 x 750mm (L x W x H) with Single Drawer D.) 2 seater linear overall size : 2175 x 650 x 1200mm (L x W x H ) - 1 set each seat size : 997 x 600 x 750mm (L x W x H) with Single Drawer E.) 2 seater Face to face overall size: 1620 x 1300 x 1200mm (L x W x H) - 1set each seat size : 1500 x 600 x 750mm (L x W x H) F.) 1 seater linear size : 1620 x 650 x 1200mm (L x W x H ) - 4 set each seat size : 1500 x 600 x 750mm (L x W x H) 4 seater Face to face overall size: 3180 x 1300 x 1200mm (L x W x H) - 1set each seat size : 1500 x 600 x 750mm (L x W x H) 3 seater L-shape workstation overall size : 2775 x 2900 x 1200mm (L x W x H) - 1 set top size : as per site measurement Aluminium Partition:There would be partition panels of overall thickness of 60+0.5mm of minimum Blow sizes fixed in a cross sectional fashion with the help of a right angle/straight connectors of suitable size, as per requirement and drawing. The panel would be made with a combination of Aluminum sections of overall thickness of 60mm and MDF board sandwich panels of an overall thickness of 57mm +1mm.The lower section of the partition panel will be of height 750mm up to the worktop and it will be covered with Laminate of matching color on both sides of the panel. The partition portion just above the worktop of height 450mm will be provided with a Matching Mica Laminated board on both side.The partition panel will have a double cable wire raceway management system in the bottom & above the worktop of an overall size of 120mm x 60mm. The inner side having a cable management system which provides a usable area of 90mm x 57mm. The cable management system is provided with a bottom cable raceway cover of 100mm width for easy laying of cables. The cover is having push fit arrangement for easy opening and compact fixing of cable raceway.Each aluminum partition section will be duly powder coated with matching colour of minimum 40-60 microns thickness and it should be able to withstand minimum 1000 hrs. of salt spray test/impact resistance of 150 kg-cm.Worktop:The worktop will be made out of 25mm thick MDF board post formed with matching colour laminate with half round post forming ,on the rear end and 1.5mm thick PVC edge banding on both sides. The worktop will be joined with proper jointers and dowels.Pedestal Unit:The pedestal unit of size 725 x 375 x 450mm(H X W X D) made out of 18mm thick laminated MDF board, having three number of drawer units, the two top units of 150mm depth each and the bottom drawer of 375mm depth used as the file storage unit. The front shutters matching with top surface in quarter round post forming on the right and left side and 1.5mm thick PVC Edge banding of matching colour on the remaining sides. The drawers are mounted on steel telescopic channels including necessary hardwares, handle locks etc.Accessories: Provision with each seat one keyboard tray(metal), CPU trolley (metal) The entire workstation is complete in all respects and made as per specification and as directed by engineer-in-charge.

Revolving Chair: The seat and back are made up of 1.2 cm thick hot pressed plywood upholstered with fabric/leathrette tapestry and moulded Polyurethane foam(60 mm thick on seat,30mm on back rest,desity 50kg/cum) . The back foam is designed with contoured lumber support for extra comfort. Back foam size 460(W) x490(H) mm. Seat foam size 470(W)x 420(D) mm.The back and seat cover shall be injection moulded in black copolymer Polypropylene.SEAT-BACK CONNECTING SPINE: The seat and back are arrestedtogether with a 5.0cm (w) spine made of 0.7cm thick. HR steel. The one piece armrest made of black integral skin polyurethane with 50-70 shore ‘A’ hardness and reinforced with M.S. insert. The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 0.6cm thick. HR steel. The synchro tilt mechanism shall be designed as-360° revolving type, 17° ±2° maximum tilt on pivot at center, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment have an adjustment stroke of 10.0cm to 15.0cm. The Telescopic bellow assy:- The bellow is 3 piece telescopic type andinjection molded in black polypropylene .The pedestal is injection molded in black30% glass filled Nylon. A 10.5 dia forged bright zine plated M.S. caster pin press fittedinto each prong for holding the castors. The pedestal shall be 700 mm pitchcentre-dia. (750 mm with castors).The twin wheel casters are made of nylon . Overall Dimensions of Chair as measured from pedestal - Width-75. cm and Depth- 75.0cm. All the metal parts have free from the dent, burrs and sharp edges, before stove enamellings to remove grease, rust, scale and any other foreign element before Powder coating. The minimum thickness of powder coated should be 40-50 microns. The entire chair is complete in all respects and made as per specification and as directed by engineer-in-charge.

Office Steel Rack- Stainless steel SS 202 grade rack 36" x 15: x 78" with 5 shelves of 20 guage having six compartment structure will be made up of 32mm (+/- 4mm) square stainless steel pipe with bottom shoe.

Revolving Chair for Conference Table : Supplying and placing in position chair of the following specifications. The cushioned seat assembly shall consists of insert moulded polyurethane foam(density 35 kg/cum, thickness 30mm) upholstered with foam laminated mesh fabric(220 GSM ). The insert moulded foam is assembeled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-48.5cm, (H)-47.0cm & size of seat shall be (W)-51.0cm x (D)- 52.5cm. Armrest Adjustable.The mechanism of chair shall have following features:360 degree revolving type, center tilt mechanism. The pneumatic height adjustment have an adjustment stroke of 10.0 cm to 15.0 cm. The Telescopic bellow assy:- The bellow is 3 piece telescopic type and injection molded in black polypropylene .The pedestal is injection molded in black 30% glass filled Nylon. A 10.5 dia forged bright zine plated M.S. caster pin pressfitted into each prong for holding the castors. The pedestal shall be 700 mm pitchcentre- dia. (750 mm with castors).The twin wheel casters are made of nylon . Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below.The entire chair is complete in all respects and made as per specification and as directed by engineer-in-charge.

Daniel Furnitures P Limited