REPAIRS TO VARIOUS STEEL FURNITURES INCLUDING PAINTING AND POLISHING AND OTHER MISC REPAIRS TO FURNITURE ITEMS UNDER GE NASIK ROAD.

Amount

Repair to Bed Hard steel MAP (FD/E6/MAP/08)

Removing the existing worn out UNSV Ply wood from Bed Hard steel MAP as per drg & directed by Engineer -In -Charge.

Supply and fixing of ply wood commercial of size 7' x 3' x 12 mm thick BWR grade, Ist mark kit ply (Vista) / Assam power / Anchor on top frame with counter sunk screw with washer of required length all as specified and as directed by Engineer - in-Charge.

Removing of old UNSV Head Rest from Bed Hard Steel MAP and S & F New Head Rest as per existing size and Shape all as specified as per drawing and directed by Engineer-in charge.

Removing of old UNSV Foot Rest from Bed Hard Steel MAP and S & F New Foot Rest as per existing size and Shape all as specified as per drawing and directed by Engineer-in charge.

Removing of old UNSV Side Rail from Bed Hard Steel MAP and S & F New side rail as per existing size and Shape all as specified as per drawing and directed by Engineer-in charge.

Removing of old UNSV Stiffener from Bed Hard Steel MAP and S & F New stiffener as per existing size and Shape all as specified as per drawing and directed by Engineer-in charge.

Repair of Charpoy GI Pipe 32mm Ply Top (FD-220)

Removing old Plytop from charpoy GI pipe 32mm & S&F of new plywood made out of 12mm thick plywood commercial BWR grade, ISI Mark Make Kit Ply (Vista/Assam Power/Anchor on top fixed to each cleat with counter sunk nut bolt & washer of required length all as specified and diredted by Engr-in-charge.

Removing old U/S stiffner from charpoy and S&F with welding of new stiffner made out of MS Square Tube 25 x 25 x 1mm thick between long rail to long rail as directed by Engr-in charge.

Removing of old U/S cleats form GI Charpoy and S&F with welding new cleats made out of MS Flate 40 x 6mm, 50mm long as directed by Engr-in charge.

Repair to charpoy Folding (FD-388)

Removing the existing worn out UNSV Plywood from charpoy IP Folding steel and S & F of Ply wood Commercial of exixting size Make- BWR grade, Ist mark kit ply (Vista) / Assam power / Anchor on top frame fixed with screw & washer of required length all as specified and as directed by Engineer - in-Charge.

Repair to Almirah large steel (FD-67 and 1031) as under :-

Removing of UNSV 3 way locking device and providing / S&F of new locking device 3 way and fixing them to almirah large and making original shape complete welding to the almirah all as specified on drawing and directed by Engineer-in charge.

Removing of UNSV hinges from shutters S&F of new hinges 75mm by welding properly to the shutters all as specified on drawing and directed by Engineer-in charge.

Removing of unserviceable locks and providing new locks of size 50 mm, 6 levers with stainless steel keys in duplicate for Almirah large steel with shelves and fixing them with existing 3 way locking system all as specified on drawing and directed by Engineer-in charge.

Removing of unserviceable / broken handles & providing new handle steel cromium plated 100mm to almirah large with shelves & fix suitably as specified on drawing and directed by Engineer-in charge.

Removing unserviceable shelves of almirah large steel with shelves and providing new shelves, made out of 20 guage MS black sheet duly painted with two coats of synthetic enamel paint over a coat of redoxide primer by means of spray painting & providing necessary cleats/nuts and bolts etc complete all as specified on drawing and directed by Engineer-in charge.

Removing unserviceable/broken old legs of almirah Large steel and supply and fixing of new leg of same as per drg and directed by Engr -in-charg.

Repair to Almirah med steel (FD- 243 and 1032) as under :-

Removing of UNSV 3 way locking device and providing / S&F of new locking device 3 way and fixing them to almirah med and making original shape complete welding to the almirah all as specified on drawing and directed by Engineer-in charge.

Removing of UNSV hinges from shutters S&F of new hinges 75mm by welding properly to the shutters all as specified on drawing and directed by Engineer-in charge.

Removing of unserviceable locks and providing new locks of size 50 mm, 6 levers with stainless steel keys in duplicate for Almirah med steel with shelves and fixing them with existing 3 way locking system all as specified on drawing and directed by Engineer-in charge.

Removing of unserviceable / broken handles & providing new handle steel cromium plated 100mm to almirah med with shelves & fix suitably as specified on drawing and asdirected by Engineer-in charge.

Removing unserviceable shelves of almirah med steel with shelves and providing new shelves, made out of 20 guage MS black sheet duly painted with two coats of synthetic enamel paint over a coat of redoxide primer by means of spray painting & providing necessary cleats/nuts and bolts etc complete all as specified on drawing and directed by Engineer-in charge.

Removing unserviceable/broken old legs of almirah med steel and supply and fixing of new leg of same asp per drg and directed by Engr -in-charg.

Repair to Locker bed side Steel (FD-1029/1029( R)) as under :-

Removing of UNSV hinges from shutters S&F of new hinges 75mm by welding properly to the shutters all as specified on drawing and directed by Engineer-in charge.

Removing UNSV Haps & staples from lockers S&F of new Haps & staples 75mm steel CP duly welded to the locker shutters in original shape all as specified on drawing and directed by Engineer-in charge.

Removing of UNSV Handles from lockers, S&F of new handles 100mm steel CP ('C' type) duly welded to the locker shutter in original shape all as specified on drawing and directed by Engineer-in charge.

Removing of UNSV 3 way locking device from locker S&F of new locking device complete with 100mm steel CP handles duly fitted with nut and bolt/welding to the locker in original shape all as specified on drawing and directed by Engineer-in charge.

Removing of UNSV lock from locker S&F of new locks of size 50mm, 6 levers with kays in duplicate Make-Godrej and fixing them with 3 way locking system all as specified on drawing and directed by Engineer-in charge.

Removing of UNSV sliding channel for locker bed side with drawer and S & F of New sliding channel all as specified on drawng and direced by Engr-in charge.

Bin linen Multipurpose FD/E6/Map/09

Removing the unserviceable / broken top of Bin Linen Multipurpose and providing/ fixing new top made out of 18/19mm pre-laminated particle board including French polishing for beading complete as specified and as directed by Engr-in-charge.

All as per item No. 7.01 above but left/right side of Bin Linen Multipurpose.

Repair to unserviceable worn out back of Bin Linen Multipurpose by providing / Fixing 12mm thick new comercial ply wood duly french polished compleate all as specified and as directed

Removing all unserviceable Knob of drawer and supply and fixing new steel knob of same size and shape.

Removing unserviceable drawer of Bin Linen Multipurpose and supply and fixing new drawer of same size and shape.

Removing the unserviceable / broken shuters of Bin Linen Multipurpose and providing/ fixing new shutters with ,magnetic catcher, made out of 18/19mm pre-laminated particle board including French polishing for beading complete as specified and as directed by Engr-in-charge.

Rapair to table 900x900x760mm steel FD-1009 as under :-

Removing unserviceable / Broken top of table and providing new top of size 900 x 900 mm made out of 18mm thick pre-laminated particle board including teak wood beading 4mm thick alround the table top, duly french polished as directed & as shown on Drg.

Removing of existing U/S legs and providing new legs with rubber shoe as per same specification.

Removing of existing U/S Top frame rail and providing new rail as per same specification.

Table computer (FD/E6/MAP/03)

Removing unserviceable / Broken top of table computer and providing new top of same size made out of 18mm thick pre-laminated particle board including PVC beading alround the table top, duly french polished as directed & as shown on drg.

Removing unserviceable / Broken Key Board Drawer and S & F of New one as per existeing size all as specified on drawing and as directed by Engr-in-Charge.

Removing unserviceable / Broken Drawer with knob and S & F of New one as per existeing size all as specified on drawing and as directed by Engr-in-Charge.

Removing unserviceable / Broken Key Board Drawer's and Table Deawer Sliding Channels and S & F of New one as per existeing size all as specified on drawing and as directed by Engr-in-Charge.

Removing unserviceable / Broken mouse Pad Drawer and S & F of New one as per existeing size all as specified on drawing and as directed by Engr-in-Charge.

Removing unserviceable / Broken Printer standand S & F of New one as per existeing size all as specified on drawing and as directed by Engr-in-Charge.

Repair to chair Computer /revolving tilting/office chair revolving (FD-75(M) /FD/E6/MAP/01) /FD-4103 as under :-

Removing the old UNSV/worn out wheels from the chairs, replacing with new nylon/PVC wheel duly fitted to the chair with suitable size of screws all as shown in drawing and directed by Engineer-in charge.

Removing the old UNSV/worn out Gas lift mechanism/pnuematic pump from the chair, replacing with new high quality gas lift mechanism pump alongwith titling bolt suitable size duly fitted to the chair all as specified and directed by Engineer-in charge.

Removing the old UNSV/worn out Arm rest (Handle) from the chair, replacing with new D type PU soft/Hard handles of suitable size duly fitted to the chair with screws/Bolt at required size all as specified and directed by Engineer-in charge.

Removing the old UNSV stand Base from the chairs, replacing with new stand made up of Base PVC with wheel of reqiured size to be fitted to the chair at original shape complete all as specified and directed by Engineer-in charge.

Removing the old UNSV seat from the chair, replacing with new seat made out of 12mm thick moulded ply sheet and chemically treated and cushioning covered by fabric/Leather cloth as approved by GE all as specified and directed by Engineer-in charge.

Removing the old UNSV back from the chair, replacing with new back made out of 12mm thick moulded ply sheet and chemically treated and cushioning covered by fabric/Leather cloth as approved by GE all as specified and directed by Engineer-in charge.

Repair to chair Varandah FD/MAP-II/06 & 15 as under :-`

Removing old UNSV/Broken PVC seat & Back from chair varandah & providing and fixing new PVC Seat & Back for chair varandah all as specified on drawing and as directed by Engr-in-Charge.

Repair to sofa set 4 seater (FD-373) as under :-

Repair to sofa set 4 seater FD-373 by removing old unserviceable seat & back by replacing with new foam/cushion, 40 density 100 mm tapestry as specified and shown in drg (Rate of Tapestry shall be not less than Rs 200/- per mtr)

All as per item No-12.01 above but sofa set 5 Seater (FD-373)

Repair to table office Clks steel (FD-84/381/1004) as under :-

Removing the UNSV table top and providing new top of size 1220mm length x 610mm width, made out of 18mm thick pre-laminated particle board including 4mm thick teak beading all round the table top complete duly french polished all as specified on drawing and directed by Engineer-in charge

Removing unserviceable locks and providing new drawer brass lock with stainless steel duplicate keys Make-Godrej for tables all as specified on drawing and directed by Engineer-in charge

Removing the UNSV drawers and supply new drawer as per same specificition & size directed by Engineer-in charge

Repair to table office offr steel (FD-84M & 1003) as under :-

Removing the UNSV table top and providing new top of size 1220mm length x 610mm width, made out of 18mm thick pre-laminated particle board including 4mm thick teak beading all round the table top complete duly french polished all as specified on drawing and directed by Engineer-in charge

Removing unserviceable locks and providing new drawer brass lock with stainless steel duplicate keys Make-Godrej for tables all as specified on drawing and directed by Engineer-in charge

Removing the UNSV drawers and supply new drawer as per same specificition & size directed by Engineer-in charge

Repair to table 900x600 (3'x2') steel with Dr and W/O Dr FD-1007/1008 as under :-

Removing the UNSV / Broken table top and providing new top of size 900 x 600 mm made out of 18mm thick pre-laminated particle board including teak wood beading 4mm thick alround the table top complete duly french polished all as directed and as shown on Drg.

Replacement of old U/S leg as per existing specification

Replacement of old U/S long rail as per existing specification

Replacement of old U/S short rail as per existing specification

Replacement of old U/S stiffner as per existing specification

Removing the UNSV/old drawer & supply & fixng of New drawer to table 900x600 with drawer.

Table Bed side, FD/E6/MAP/15 (R)

Removing the unserviceable / broken top of table bed side and providing/ fixing new top made out of 18/19mm pre-laminated particle board with PVC edging fixed to frame, complete as specified and as directed by Engr-in-charge.

Removing unserviceable pull out Tray with Telescopic channel of table bed side and supply and fixing new Pull out Tray with Telescopic channel of same size and shape.

Removing unserviceable drawer with Telescopic channel of table bed side and supply and fixing new drawer with Telescopic channel of same size and shape.

Removing the unserviceable worn out side of table bed side and providing/fixing new side made out of 18/19mm pre-laminated particle board all complete as specified and as directed by Engr-in-charge.

Repair to unserviceable worn out back of table bed side by providing /fixing 6mm thick new commercial ply wood duly french polished complete all as specified and as directed by Engr-in-charge.

Removing unserviceable handle of drawer and supply and fixing new handle of same size and shape.

Repair to Teapoy Varandah MAP (FD/E6/MAP/17) :-

Removing the UNSV/Broken top of teapoy Varandah Map and providing new top of size 750 mm x 450 mm made out 18 mm thick pre-laminated particle board including 4 mm thick teak beading around the top complete duly French polished and fixing with necessary screws to frame all as specified and directed by Engineer-in-Charge.

Removing unserviceable/broken Rubber shoe of leg and supply and fix new hard rubber shoe all as specified and directed by Engineer-in-Charge.

Repair to table dining 1200x900x760mm (FD/E6/MAP-II/03 )as under :-

Removing UNSV worn out top of table and S&F new top made of 18 mm thick pre-laminated particle board of size 1200 x 900mm including 4 mm thich 1st class hard wood teak edging all round of table top complete all as specified and shown in drg.

Removing UNSV worn out legs of table and S&F new legs made out of 1st class HW (Indian Teak) made to shape and size as per drg duly French Polished, fixed with glue and bamboos pin complete all as specified & shown on Drgs.

All as per item No. 18.02 above but long rail of table dining.

All as per item No. 18.02 above but short rail of table dining.

Repair to table dining ORs with sunmica Top FD-165(M) as under :-

Removing of existing U /S top of Table Dining ORs and Supply & fixing of new top of same size & shape made out of 18/19 mm thick pre-laminated particle board and fixing with suitable screw to table frame as per drg & directed by Engr in Charge.

Removing of old U/S leg with rubber shoe and welded new legs with rubber shoe as per existing specification & drg.

Removing of old U/S long rail of top frame and welded new long rail as per existing specification & drg.

Removing of old U/S short rail of top frame and welded new short rail as per existing specification & drg.

Removing of old U/S stiffner long and welded new stiffner long as per existing specification & drg.

Removing of old U/S stiffner short and welded new stiffner short as per existing specification & drg.

Repair to Composit office table with Pre- Laminated partical Board top, 1800x900x750mm

Removing UNSV worn out top of table and S&F new top made of 18 mm thick pre-laminated particle board of size 1800 x 900mm including 4 mm thich 1st class hard wood teak edging all round of table top complete all as specified and shown in drg.

Repair to Composit office table with Pre- Laminated partical Board top, 1200x600x750mm

Removing UNSV worn out top of table and S&F new top made of 18 mm thick pre-laminated particle board of size 1200 x 900mm including 4 mm thich 1st class hard wood teak edging all round of table top complete all as specified and shown in drg.

Repair to Table writing (DB3879/3962/3877 ) as under :-

Removing unservice/worn out legs of table writing and S&F new legs made out of 1st class HW (Indian teak), made to shape and size, duly French polished , fixed with glue and bamboos pins all as specified & as directed by Engr-in-charge.

All as per item No. 22.01 above but stiffener short of table writing

All as per item No. 22.01 above but stiffener long of table writing

Removing old unserviceable worn out top of table and providing and fixing new table top size 1145 x 600mm made out of 18mm thick pre-laminated particle board with teak veneer natural finish one side with and including 4mm thick teak wood beading all-round including tightening the same as directed by Engineer-in-charge.

Repair to unserviceable worn out back side of table by providing/fixing new 6mm thick commercial plywood to table writing french polished complete all as specified & as directed by Engr-in-charge.

Repair to unserviceable worn out sides of table by providing/fixing 4mm thick Teak Veneared plywood to table writing incl french polish complete all as specified and as directed by Engr-in-charge.

Removing of unserviceable worn out door shutter of table writing and providing and fixing new door shutter made out with 18mm thick particle board teak veneer natural finished one side complete including 4mm thick 1st class teak wood beading including required size piano hinges all round to shutter with 40mm dia powder coated MS knob with one magnitic door catcher including french polishing to shutter all as specified and as directed by Engr-in-charge.

Repair to Table 900 x 900 x 760 mm, wooden as under (FD-88 ):-

Removing UNSV/broken top of table and S&F new top made out of 18 mm thick pre-laminated particle board size 900x900 mm including 4 mm thick 1st class hard wood teak edging all round of table top complete all as specified and shown in drg.

Removing UNSV/broken legs of table and S&F new legs, made out of 1st class HW (Indian Teak) made to shape and size duly French polished fixed with glue and bamboos pin all as specified and shown in drg.

All as per item No. 23.02 above but front/back rail of table.

All as per item No. 23.02 above but side rail of table.

M & L for scrapping of old paint & applying putty and making smoothing of surfaces complete before painting and applying one coat of red oxied (Steel primer) & two coats of synthetic enamal paint of olive green / Black/white by spray painting of the following steel furnitures. These shall be carried out in offrs/JCOs/ ORs md accn, Offices and unit lines at AOP & NRC areas and BSO Furniture yard under GE NRC:-

Side Rack with tray four space steel FD-1032

Steel shelving cabinet (Adj types) without locks drvs

Book case steel/Book shelf small steel Fd-1028/69

Almirah Large steel FD-67/243/1031

Almirah med Steel FD-1033

Chair CB Tublar with arms FD-75

Locker steel bed side FD-1029 & 1029 ®

Stool steel 610mm FD-81

Table office clerk steel DB-3988 & FD-84/1004

Table office officer steel FD-1003/84M

Adj steel Rack 6'x3'x8' TP

Rack six tier steel 910x305x1905 FD-1038

Table 900x900x760mm steel

Composit office Table (1500x900) / (1800x900) & (1200x600)

Table Dining Ors FD-165(M) (Painting with black Paint)

Form without Back steel (FD-77/1027) (Painting with black Paint)

Chair Varandah FD/MAP-II/06 & 15 (Painting with white Paint)

Prepairing of smooth surfaces by scraping/sand papering and applying two coats of french polish of superior quality of make "Sheenlac" to the following wooden items of furnitures. These shall be carried out in offrs/JCOs/ ORs md accn, Offices and unit lines at AOP & NRC areas and BSO Furniture yard under GE NRC

Almirah Large wooden w/s, DB-4116

Almirah med wooden w/s, DB-3559

Locker Bed side woodenDB-4014/4974 & FD-222/54

Book Case wooden / Book Shelf open Large FD-237/F-6/DB-4071

Table dining 1200x900x760mm FD/E6MAP-II/03

Table Office clerk (P) DB-4120

Table 5'x2'x10" wooden F-1

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS 85038.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Priyanka Industries

SARGAM ENTERPRISES

KASTURILAL HARICHAND OHRI AND SONS

Imprint Digitech

swastik industries

M/s S.D Construction Co

Bidder Name

swastik industries

KASTURILAL HARICHAND OHRI AND SONS

M/s S.D Construction Co

M/s Rajesh G Ramsinghani

SARGAM ENTERPRISES

Imprint Digitech

Priyanka Industries