SPECIAL REPAIRS BLDG NO P 7A OR LIVING ACCN AT HQ KK SUB AREA CAMP UNDER GE SOUTH BANGALORE

Amount

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings, complete all as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding, valley gutter ridge, fixed with self tapping screws complete all as directed.

Preparation of old wood and wood based material surfaces over 10cm width or girth and applying a coat of creosote.

Dismantling of ceiling boards any description fixed in any thickness and in any position with screws/ nails including cover fillets/ battens complete all as directed.

Suspended false ceiling system using E Grid suspended ceiling Grid system of M/S Everest Industries Ltd or India Gypsum. The size of Grid shall be 600x600mm with Aluminium powder coated frame work, main runner 39x24mm, cross tee 29x24mm and wall angle 22.2x22.2mm including 4mm thick High Pressure Stream cured non primered classic, designer variant E-Board one side decorative ISI marked IS No 14862-2000. Fibre cement E Board to be placed in the grid of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the purlins/self tightening screw in roof with butter fly clips complete all as directed. Note:- The rate quoted by the contractor shall be inclusive of complete ceiling work including ceiling grid and ceiling board

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing out side of MD land complete all as directed.

Non skid ceramic (Joint free) coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc. over and including 15mm thick screed bed in CM 1:6.complete all as directed. Make: Blanco Nieve/Crema of Kajaria or eqivalent of RAK/Johnson/Somany

Glazed coloured ceramic tiles in vertical surfaces 300 x 600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as directed.

Demolition of brick work /stone masonry built in cement mortar of any description all as directed.

Precast cement block masonry with solid blocks grade C-5 ,exc 10cm in width and setting in cement mortar 1:4 complete all as directed.

Taking down chowkat (without taking of shutter from the frame) exc 1.5 sqm but not exc 4 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 complete all as directed.

Steel window with box type frame(80x60x12.5mm profile sheet for frame) with box type shutter inside glazed shutter and outside gauged shutter with steel handle, telescopic pegs stay complete with glazing bars and 08 nos of 10x10 mm square guard bars in equal spacing, dovetailed or welded as per TD Drg no 539 of HQ CE Chennai Zone including one coat of red oxide primer complete all as directed. Note: PCC in frame, glass pane and wire mesh shall be measured and paid seperately

Steel windows or ventilators, fixed type, with glazing bars including taking down existing frame with shuttercomplete in repairs complete all as directed.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts in repairs complete all as directed.

4mm thick sheet glass ordinary quality and glazing with putty/beading in squares not exc 0.50 Sqm in each pane complete all as directed.

Second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints, complete all as directed.

Factory made 35 mm thick 2nd class hard wood shutters of plain framed, paneled shutter (two panel) with lock rail and panel of 9mm thick commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated complete all as directed.

35mm thick first class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b);and fitted to chowkats complete all as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening complete all as directed.

Factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site complete all as directed.

Preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10cm width or girth complete all as directed.

Preparation of new wood surfaces and applying two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as directed.

375 mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate fixed complete all as directed.

300 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt fixed complete all as directed.

200 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as directed.

125 mm long but hinges, medium weight, cold rolled mild steel and fixed complete all as directed.

20mm dia fancy type curtain rods with suitable bracket complete all as directed.

Dismantling PVC/CI/AC drain pipe n.exc 110 mm dia complete all as directed.

75mm bore PVC SWR pipe single socket in any length with rubber ring joints laid in trenches or in floors complete all as directed.

75 mm bore PVC (SWR) bends any radius complete all as directed.

Taking down steel tubing and connections for 15 to 20mm dia pipe complete all as directed.

GI water tubing of 15 mm dia medium grade with fittings fixed on walls or laid in floor complete complete all as directed.

15 mm bore Fancy type Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair complete all as directed.

GI pipe 20 mm dia medium grade steel water tubing with fittings fixed on walls or laid in floor complete all as directed.

Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe ) and trap , including connection to drain (or out going pipe) and to flushing pipe , anti syphonage pipe ,etc and plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device as in repairs complete all as directed.

Vitreous china white wash hand basin flat back size 550x400 mm incl brackets chain & plug and waste pipe waste coupling etc.as in repairs complete all as directed.

10 ltr capacity PVC valve less symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, fixed in repairs, complete all as directed. Make: Cat no-502 of Prayag or eqivalent of Hindware/Parryware/Cera

Vitreous china toilet paper holder white box type complete all as directed

15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed complete all as directed

15 mm bore stop valves, fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as directed

Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as directed

Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as directed

Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) complete all as directed

Soap Dish vitrious china white, approximate size 160x160x90 mm fixed to plugs with chromium plated brass screws complete all as directed

PVC connection 15mm size with PTMT nuts on both ends of length 600mm complete all as directed.

Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190 gms).

Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 90 gms).

Demolition of cement concrete floors and pavings n exc 15cm thickness (below or above ground level) complete all as directed.

Excavation in trenches not exceeding1.5 metres wide and not exceeding 1.5 metres in depth and getting out in soft/loose soil complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thickness complete all as directed.

Removing excavated material to a distance exc 1.5 km but n.exc 50 mtr and depositing where directed complete all as directed.

Cement concrete 1:4:8 type D2, (using 40 mm graded stone aggregate), as in foundation of drain complete all as directed.

Cement concrete type B-0 (1:2:4) using 12.5 mm graded aggregate as in surface channels complete all as directed

Cement concrete type B-1 (1:2:4) using 20mm Graded stone aggregate as in coping of drain complete all as directed.

Extra for forming fair finished drain or channel 40cm inner girth in cement concrete using extra cement, including forms, mould and mitred/stopped ends complete all as directed.

Precast cement block masonry with solid blocks grade C-5 ,exc 10cm in width and setting in cement mortar 1:6 complete all as directed.

Rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete block walling surfaces finished even and smooth without using extra cement complete all as directed.

100 mm thick hardcore of gauge nexc 63mm , deposited , spread and levelled in layers n'exc 15cm thick, watered and rammed to true surface complete all as directed.

100 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate complete all as directed.

60 mm thick machine pressed precast concrete interlocking colour tiles paver block any shape complete over 25mm thick sand filling for sand cushion all as specified and as directed.

Taking down cement plaster on brick/stone/concrete surface including wall tiling etc and hacking out joints hacking for key scrubbing down with water etc.complete all as directed .

Rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete block walling surfaces finished even and smooth without using extr cement with using water proofing compound as per manufacture's instructions complete all as directed. Note :- Waterproofing compound shall be measured and paid separately.

Preparing newly plastered surfaces and applying two coat of oil bound distemper over a coat of alkali resistant primer on walls including in narrow width bands cornice spinsters etc complete all as directed.

Complete removing existing treatment on old plastered surfaces or preparing new plastered surfaces of walls and applying two coats of acrylic (antifungal) exterior grade paint (Apex or equivalent) over a coat of exterior primer complete all as directed.

Complete removal of existing treatment of wall and and applying two coat of oil bound distemper over a coat of alkali resistant primer on walls including in narrow width bands cornice spinsters etc complete all as directed.

Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed.

Preparing of old decorated surfaces of walls and applying two coats of white wash including cleaning all window panes from splashes of white wash, etc complete all as directed.

All as per item No 69 here in before but on ceilings.

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc including painting with same colour of the back ground complete all as directed.

Taking down unserviceable main switch/DB, Teak wood boards etc complete all as directed.

Taking down old unserviceable Sub main wiring and making good the disturbed surfaces complete all as directed.

Wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conforming to IS 694 drawn through and including non metallic rigid PVC conduit including accessories concealed in walls including MS terminal boxes fabricated with 1.6mm thick MS sheet concealed in walls with plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators etc including 1.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as directed for following:-

One light point controlled by one switch.

One fan point controlled by one 5 Amps switches/regulator.

One 3 pin socket point 5 Amps on independent board.

One 3 pin 5 Amps socket point on the same board with other switches

Wiring complete with 2.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conforming to IS 694 drawn through and including non metallic rigid PVC conduit including accessories concealed in walls including MS terminal boxes fabricated with 1.6mm thick MS sheet concealed in walls with plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, including 2.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly for 3pin 15A socket outlet complete all as directed.

Note for Item No 74 & 75 :- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box and laminated sheet in the item rate quoted for point wiring.

Switch piano , flush type single pole, 5 Amps one way complete all as directed.

Switch socket combination 2 in 1, 3 pin 5 Amps flush type universal complete all as directed .

Switch socket outlet 2 in 1, 3 pin 5 Amps flush type universal complete all as directed .

Switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal complete all as directed.

Ceiling rose surface type Bakelite of size 65 x 50 mm, 2 to 3 terminals complete all as directed

Step type electronic fan regulator flush type, 230 volt, AC complete all as directed

MCB single pole 240 volts 6 to 32 Amps (Curve-C) complete all as directed, Make :-Indoasian Cat No: 811122 to 811132 or Equvalent of LEGRAND / HAVELS / STANDARD / BENTEC /HPL

MCB single pole and neutral 06 to 32 Amps, 240 Volts, complete all as directed Make :-Indoasian Cat No: 811144 to 811151 or Equvalent of LEGRAND / HAVELS / STANDARD / BENTEC /HPL

MCB TPN 63 Amps, 415 Volts , complete all as directed Make :-Indoasian Cat No: 811198 or Equvalent of LEGRAND / HAVELS / STANDARD / BENTEC /HPL

Sheet metal enclosure (for DB's when MCBs to be used), single pole and neutral Double door, 8 way, 240 Volts complete all as directed

MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as directed

LED batten suitble for indoor application 20 W, 4' length , housing in extruded aluminium natural anodised finish with end cap made of ABS plastic with white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down existing unserviceable tube light fittings complete all as directed Make C&S Cat part No LTTB4F20WLED/W or equivalent of Philips /Bajaj / Crompton Greaves / Wipro/ Jaquar

Recess mounted 36 watt 2'X2' exturded aluminium housing with milky diffuser recess mounting ultra slim LED panel integrated electronic driver of operating voltage 110 to 265 Volts complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down existing unserviceable tube light fittings complete all as directed Make C&S Cat part No LTCRSLM36WATT2X2 or equivalent of Philips /Bajaj / Crompton Greaves / Wipro/ Jaquar

Taking down the existing ceiling fan carefully and depositing the same to E/M store complete all as directed

GI pipe light grade 15 mm dia for bringing down the ceiling fans up to 1 mtrs including threading drilling and bolts, nuts etc for fixing complete all as directed

Ceiling fan complete with electronic type regulator and accessories 230 V, 1200mm sweep, BEE 5 star rated , ISI standard, RPM 340, Air delivery 210CMM, down rod lenth 300mm, rust free powder coated finish and pre wired and including connecting up with twin core twisted flexible copper conductor cable with connector complete all as directed Make - Bajaj Electra 50 product code 250254 or equivalent make of crompton/Havells

Sub main wiring concealed type with three runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) including earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as directed (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including test point complete all as directed.

Sand cushioning to under ground cable in layers (8 cm before laying the cable and 15 cm after laying the cable in trenches for cable protection complete all as directed. Note : Punned / completed thickness shall be measure for payment purpose.

Sub class B,with designation 75, burnt clay bricks for cable protection complete all as directed.

PCC 1:3:6 type C1 using, 20 mm graded stone aggregate for make good to road surface , hard standing etc complete all as directed

Supply, laying commissioning and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core.complete all as directed

GI pipe light grade 40 mm for cable protection fixed to poles/bldg incl two Nos MS clamps made to shape out of 25 x 3mm MS flat and painting incl bolt, nut, washer etc.complete all as directed

MCCB 4 pole, 415 V, adjustable type , 63 Amps with breaking capacity 36 KA complete all as directed

SREE VINAYAKA ENTERPRISES

S L R Construction

Srisrinivasaenterprises

RK Builders

Sangam Construction