AAddition Alteration to sea side windows and repair to water seepage in ROC and ROS section at RHQ (E) Building and Repair/replacement of Wall cladding tiles and associated work of High security boundary wall at RHQ (E) Building at Chennai etc

Amount

Taking down cement plaster on brick or stone wall etc including raking out joints ,backing for key , scrubbing down with water etc including removal of debris off the premises not exceeding 100 metres away complete all as specified and as directed.

Dismantling wall tiling / wall cladding stone /Roof tiling including cement mortar bedding(but not backing) ,removing serviceable tiles to store and removal of debris off the premises not exceeding 100 metres away complete all as specified and as directed.

Removing old white wash , hacking for key, raking out joints of old brick work or stone work built in cement mortar and scrubbing down with water etc. to receive plaster completeall as speicfied and as directed

Material and labour for Backing coat (rendering) 10 mm thick on fair faces of brickwork or concrete surface in CM 1:4 for receving wall tiles complete all as specified and as directed.

Material and labour for Digital wall coloured ceramic tiles 8-10 mm thick (square or rectangular) area of each tile n exc 0.18 sqm in vertical surface set and jointed in near cement slurry and pointed in white or coloured cement to match complete all as speicifed and directed. Notze: Make of Tile : Johnson/Somany/Kajaria

Dismantling Mild steel work of any descipiton and taken as credit complete all as specified and and as directed.

Material and labourfor Rolled Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including steel sheet or other covering, running rails and guides and hanging; also fastening and fixing confirming to Fe-410-W(Gde-E-250)quality -B complete all as specifed and directed

Material and labour for Plain Cement concrete 1:2:4 type B-1(using 20 mm graded stone aggregate) as in bed blocks,copings,hold fast etc . including necessary formwork complete all as specified and as directed.

Supply and fix in repairs punched type GI Concertina coil 610 mm dia, zinc coated, stretchable to 6 metre length which cover the area of 50 nos of spiral turns made out of 2.60 mm thick coil having blade of size 0.50 mm thick and 19mm long as in fencing to steel post including fixing with special galvanised fasteners such as J clips, C clips and U clips complete all as specified and as directed.

Supply and fix in repairs Galvanised steel Barbed Wire as per IS 278-1978.2 strand, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of stranded rails straining bolts including securing, or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete, all as specified and as directed (each line wire to be measured) .

Demolition of brick work or stone masonry built in cement mortar including removal of debris off the premises not exceeding 100 metres away complete all as specified and as directed.

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Rendering 15mm thick in CM 1:6 on fair faces of brick wall or stone wall masonary and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surface and applying two coats of oil bound distember over a coat of primer complete all as specified and as directed.

Material and labour for 3mm thick Wall Care Putty including cleaning the wall surface with the help of sand paper, putty blade or wire brush and then apply 1st coat on moistened surface and after surface dried , rub gently with wet sponge, then allow the surface dry for 3 hours and similarly apply second coat and leave for 10-12 hours and finally rub with very fine emery paper to obtain glossy surface complete all as specified and as directed. Note:Make of wall putty :Jk White cement/Birla Wall care putty

Taking down frames with shutter of any description ,area not exc 1.5 sqm each (without taking off shutters from the frame) and removing from the site including making good the disturbed surface of wall etc to match with the existing adjoining surfaces and taken as credit complete all as specified and as directed.

Ditto- All as per item no :16 here in before but Area exceeding 1.5sqm but not exc 4 sqm each

Material and labour for Cutting holes into or through brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area exc 150 sq cm but not exc 400 sq cm complete all as specified and as directed.

Supply and fix Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix Powder coated aluminium windows, and ventilators shutters, sliding type without sash bars , aluminium section weighing 0.55kg/ m including necessary jointing cleats, glazing clips, rubber packing , anodized aluminium snap beading, lock system, screws etc complete all as specified and as directed. Note : (i)Minimum thickness of anodisation shall be of 50 microns.(ii)Make of Aluminium window/ventilator shutter : Jindal/Hindalco/Indal .(iii) Provision of inserts shall be measured and paid separately. All other miscellanous fittings, rubber packing are deemed to be included in the unit rate quoted by the tenderer.

Supply and fix Powder coated aluminium shutters for doors, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , anodized alumnium snap beading screws etc complete all as specified and as directed. Note : (i)Minimum thickness of anodisation shall be of 50 microns.(ii)Make of Aluminium door shutter : Jindal/Hindalco/Indal .(iii) Provision of inserts shall be measured and paid separately. All other miscellanous fittings, rubber packing are deemed to be included in the unit rate quoted by the tenderer.

Supply and fix Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : (i)Minimum thickness of powder coating 50 microns.(ii)Make of Aluminium Frame : Jindal/Hindalco/Indal

Supply and fix Plain sheet glass pane 5.50 mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed. Note : Make of sheet Glass : Saint Gobain/Modi Guard/Gold Fish

Supply and fix in repair 12mm thick Toughened Glass partition with hatching design/ pattern as approved and fitted to top and bottom rail to floor and ceiling hardwood chamfered or rounded fitted with cut and mitred beads for securing glass with necessary fitting arrangements and gaps are filled with silicon sealant complete all as specified and as directed by GE , Make of Toughened Glass : Saint Gobain/Modi Guard/Gold Fish Note (1) :- Top & bottom rail shall be measured as supply only .(2) :- The rate quoted shall be inclusive of hatching design / pattern as approved by GE.

Supply only style door pull 600mm long handle of grade 304 SS "H" type 32mm dia heavy wall tubing for 12 to 18mm thick toughened galss complete all as specified and directed.

Supply only 100 x50x 2 mm thick stainless steel top & bottom rail suitable for 12 mm thick toughened galss complete all as specified and directed .

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

Material and labour for Priming surfaces by applying evenly a tack coat of hot bitumen 85/25 @1.2kg/sqm including cleaning surfaces over bitumen primer @ 0.50 litre / Sqm and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 complete all as specified and as directed . Make of Bitumen Felt :M/S Shalimar Tar Products Ltd.

Material and labour for 25 mm thick Plain Cement Concrete type B 0, 1:2:4,(using 12.50 mm graded aggregate) as in roof padding and finished even & fair surfaces including necessary formwork complete all as specifed and as directed.

Applying evenly a tack coat of hot industrial bitumen 85/25 1.2kg/sqm including cleaning surfaces over bitumen primer @ 0.50 litre / Sqm complete all asspecified and as directed. Make of Bitumen:M/S STP Ltd.

Material and labour for APP based Polymeric water proofing membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gm/sqm) laid over roof surface with 100 mm over lap and including vertical surface upto required height and tucking into grooves and sealing complete with thermofusion and finished with one coat of hot blown bitumen 85/25 @ 1.2 Kg per sqm applied over water proofing membrane complete all as specified and directed. Make of APP Membrane:M/S Hyper plas by M/S IWL Ltd /M/S Shivam Tar products/M/S Multi plas by STP Texes Ltd.

Material and Labour for cutting out cracks to V section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed , Make of Bitumen:M/S STP Ltd.

Supply and fix 25 mm dia stainless steel decorative curtain rod with fixing brackets. Stops,rollers etc complete all specified and as directed

Dismantling Wall and ceiling boards(fibre,pulp,insulation etc) or insulation boards/slabs/blanketss,any thickness including cover fillets including removal of rubbish off the premises and serviceable items taken as credit complete all as specified and as directed.

Material and labour for Powder coated aluminium snap grid false ceiling of size 605 x 605 mm using standard aluminium sections of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/ Rm as in wall angle, 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/ Rm as in Main/ Cross Tees complete all specified and as directed.Note : (i)Minimum thickness of powder coating 50 microns.(ii)Make of Aluminium Grid : Jindal/Hindalco/Indal

Supply and fix Hangers 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all specified and as directed.

Supply and fix 09 mm thick PVC insulation panel with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium complete all specified and as directed.Make:Armstrong/Luxalon by Hunter Douglas Products

Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all specified and as directed. Make:Armstrong/M/SGproc.

Material and labour for seamless calcium silicate ceiling made out of 1800 x 1200 mmx12 mm thick size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre,including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish(Frame work for ceiling shall be measured and paid separtely ) complete all as specifed and all as directed.Make:Armstrong/Gproc

Material and labour for preparation of new wall surface and applying two coats of oil emulsion distember paint complete all as specified and as directed.

Completee removal of existing treatment from the wall and removal of waste material off the premises complete all as specified and as directed.

Material and labour for Rendering 5 mm thick in CM 1:3 on ceiling on sofits and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered ceiling surface and applying three coats of with white wash completeall as specified and as directed.

Supply and fix Powder coated aluminium grill deco model no :DG-202 and fixed over alumium window/ including all fitting channel screws etc complete all specified and as directed.Note : (i)Minimum thickness of powder coating 50 microns.(ii)Make of Aluminium Grill : Jindal/Hindalco/Indal

Supply and fix Plain sheet glass 4 mm thick , ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed. Note : Make of sheet Glass : Saint Gobain/Modi Guard/Gold Fish

Supply and fix Pain sheet glass 4 mm thick , ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane complete all as specified and as directed. Note : Make of sheet Glass : Saint Gobain/Modi Guard/Gold Fish

Supply and fix Plain sheet glass 5.50 mm thick , ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane complete all as specified and as directed. Note : Make of sheet Glass : Saint Gobain/Modi Guard/Gold Fish

Material and labour for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as per specifed and as directed Note : Make : Garware/3M

Material and labour for Prelaminated particle board 12 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination as insert in aluminium shutters fixed in repairs complete all as specified and as directed. Make:Green ply/Kitply/Century Ply wood

Supply and Fix in repairs Stainless steel curtain rods 25 mm dia coloured , fancy type with fixing brackets. Stops,rollers etc complete all specified and as directed

Supply and fix in repairs 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix 125 mm long aluminium handles cast type anodised complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix 150mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix 75mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix in repairs Aluminium body(Die cast) door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of width 851 to 1000mm and of weight between 61 to 80 Kg complete all as specified and as directed.Make:Everite/Hardwyn/Diana

Supply and fix Brass mortice lock ,vertical type ,4 lever ,size 100 mm including escutcheon plates complete all as specified and as directed. Make:Godrej/Harrison/Dhanraj

Supply and fix in repairs 140 mm Floor door stopper , brass body and tongue, with hard drawn steel spring,fixed in floor complete all as specified and as directed.Make:Crown/Classic/Adarsh

Taking down carefully point wiring with copper/aluminium conductor (light,fan, socket or power complete ) and fittings such as switches,ceiling roses,pendents,regulators,sockets,light fittings,calling bell etc and removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully submain wiring with aluminum conductor cable 4/6 Sqmm in PVC conduit complete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully unserivce able TPN/SPN DB with MCBcomplete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core drawn into and including non-metallic rigid PVC conduit of 20 mm dia concealed in wall/floor etc along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling/ roof with and including 2mm thick terminal boxes MS sheet flush mounted with 3mm thick laminated hylem sheet for mountling switches, socket, fan regulators etc complete for the following points complete all as specified and as directed. Note: (i)Make of PVC cable : Finolex/ Polycab/Plaza.(ii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex

One light point controlled by one switch

One fan point controlled by one switch

One 3 point socket outelt 5 amps socket on independent board

One 3 point socket outelt 5 amps socket on the same board

Call bell points

One socket out let 3 pin 15Amp indepenedent with 2.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core drawn into and including non-metallic rigid PVC conduit of 20 mm dia concealed in wall/floor etc along with 2.5 sqmm unsheathed multi stranded copper conductor FRLS cable PVC insulated 1100 volts grade as earth continuity conductor

One light point controlled by two 2 way swithces

Material and labour for Sub main wiring with two runs single core 6 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 6 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn into and including non-metalic rigid PVC conduit, 25mm dia and conduit accessories concealed/surface of wall/roof/ceiling etc complete all as specified and as directed. Note: (i)Two runs of 6sqmm and one run of 6 sqmm cable and one run of 25mm dia conduit/casing capping shall be measured as one unit length. (ii)Make of PVC cable : Finolex/ Polycab/Plaza.(iii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex (iv) Two different colour cable shall be used for phase and neutral.(v) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Material and labour for Sub main wiring with two runs single core 4 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 4 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn into and including non-metalic rigid PVC conduit, 25mm dia and conduit accessories concealed/surface of wall/roof/ceiling etc complete all as specified and as directed. Note: (i)Two runs of 4 sqmm and one run of 4 sqmm cable and one run of 25mm dia conduit/casing capping shall be measured as one unit length. (ii)Make of PVC cable : Finolex/ Polycab/Plaza.(iii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex (iv) Two different colour cable shall be used for phase and neutral.(v) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Supply and fix Modular type switch 6 Amps one way Modular type 240v, 1 Module complete all as specified and directed. Make: Legrand/Anchor/ABB

Supply and fix Modular type switch 6 Amps two way Modular type 240v 1 Module complete all as specified and directed. Make: Legrand/Anchor/ABB

Supply and fix Modular type switch 16 Amps one way Modular type 240v 1 Module complete all as specified and directed. Make: Legrand/Anchor/ABB

Supply and fix Modular type Socket, 6A - 5 pin .240 Volt,2 Module complete all as specified and directed. Make: Legrand/Anchor/ABB

Supply and fix Modular type Socket 6A/16A - 3 pin combined 240 Volt, 2 module,complete all as specified and directed. Make: Legrand/Anchor/ABB

Supply and fix Modular type fan regulator 240 Volt, 2 module complete all as specified and directed. Make: Legrand/Anchor/ABB

Supply and fix modular white cover plate with frame 1- Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular white cover plate with frame 2- Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular white cover plate with frame 3- Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABBB

Supply and fix modular white cover plate with frame 4- Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular white cover plate with frame 6- Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular white cover plate with frame 8- Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular metal flush box for 1/2 Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular metal flush box for 3 Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular metal flush box for 4 Modulecomplete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular metal flush box for 6 Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix modular metal flush box for 8 Module complete all as specified and as directed.. Make:- Legrand/Anchor/ABB

Supply and fix Bell push modular flush type 6 amps 240 volts for 1- module Make:- Legrand/Anchor/Rider

Supply and fix Calling Bell, AC, 230 volts, single phase Make:- Legrand/Anchor/Rider

Supply and fix ceiling rose 3 phase PVC/Polycarbonate isolated body size35x50 mm dia Make: Legrand/Anchor (Roma)/ABB

Supply and fix sheet metal enclosure powder coated double door for Board distribution with 200 Amps rated bus bar SPN 8 way ,240 V complete all as specified and as directed. Make: Indo Asian/L&T/LEGRAND

Supply and fix sheet metal enclosure with socket plug top and MCBs complete single pole and neutral enclsoure with 2 pin and earth plug and socket complete with single pole MCB 25 Amp capacity including fixinig in wall duly embedded complete all as specifeid and directed Make: Indo Asian/L&T/LEGRAND

Supply and fix MCB SPN 20 to 60 Amps. Rupturing capacity 10KA, C curve complete all as specifeid and directed Make: Indo Asian/L&T/LEGRAND

Supply and fix MCB SP 5 to 30 Amps. Rupturing capacity 10KA, C curve complete all as specifeid and directed Make: Indo Asian/L&T/LEGRAND

Supply and fix Powder coated 42 W LED, 6500K luminous effiency more than 100 lm/Wof size 2 feetx2 feet recess mounted LED flat panel with high brightness LED for glare-free homogenous illumination mounted square slim and elegant downight/panel for indoor application with high aesthetic appeal suitable for grid ceiling with super bright LED Model complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed . Make : Philps cat part No:RC38OB LED42S-6500 G4 L60W60 PSU OD / In case if not available in the market (ii) Equivalent price and cat part no of Wipro/GE

Supply and fix 10 W Green LED Ultima Ultra Sleek recessed downlight for low height false ceiling in round profile . Make : Philps cat part No:DN092B LED 10S-6500 PSU WH / In case if not available in the market (ii) Equivalent price and cat part no of Wipro/GE

Material and labour for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth strip of 32x6mm by means of bolts,nuts check nuts and washers of GI all as shown in electric plate No 3 connecting to earthing test point including necssary exacavation in any earth strata , PCC chambers in PCC 1:3:6 type C1, RCC 1:2:4 type B1 cover slab 50mm thick with 8 mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle watering pipe of GI 20 mm dia medium grade, funnels, lug and charcol,salt etc all as applicable and as per plate No 3 of SSR part 1 connecting test point and testing on completion complete and all as specifed and as directed . Notes:-The rates quoted is inclusive of galvanised earth strip of 32x6mm conductor upto a length of 7.5m from the earth pit.

Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 4mm dia galvanised iron or steel wire complete and all as specifed and as directed .

Disconnecting electric connections and removing ceiling fan/Exhaust fan from i its original position and keeping safe custody, cleaning, painting and hanging only ceiling fan and connecting up including provision 3 core cable size 0.75 sqmm with flexible copper conductor form ceiling rose or connector to fan complete and all as specifed and as directed .

DJ Group

VIJAYALAKSHMI ENTERPRISES

SRI LAKSHMI ASSOCIATES

kvs constructions

M/s.Sai Agency