Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.0 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹41.4 L+₹3.3 L (8.72%)Rejected-AOC | L2 | Rejected-AOC Quoted amount are higher than L1 | |
| 3 | L3₹42.8 L+₹4.7 L (12.3%)Rejected-AOC | L3 | Rejected-AOC Quoted amount are higher than L1 | |
| 4 | L4₹43.8 L+₹5.7 L (15.1%)Rejected-AOC | L4 | Rejected-AOC Quoted amount are higher than L1 | |
| 5 | L5₹45.2 L+₹7.1 L (18.8%)Rejected-AOC | L5 | Rejected-AOC Quoted amount are higher than L1 |
Tender Value
₹37.1 L
EMD Value
₹74,300
Closing Date
1 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPL REPAIR TO BLDG NO T 17 OF ASC BN MT SPL REPAIR TO BLDG NO T 17 IN F ZONE AND SPL REPAIR TO BLG NO T 1 AND OP T 37 UNDER AGE BR I AND II AT RMS
2024_MES_645559_1
8709/C/E8
Open Tender
Civil Works
Item Rate
120 days
RANGAPAHAR
Class D Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹74,300
29 Apr 2024
7 Mar 2024
3 Apr 2024
7 Mar 2024
1 Apr 2024
19 Mar 2024
7 Mar 2024 - 12 Mar 2024
Amount
Dismantling Plain corrugated steel sheeting, any gauge, thickness, including, Nanital or similar pattern roof covering etc complete all as specified and as directed.
Demolition of reed lathing single or double including battens and plaster or chicken wire lathing etc complete all as specified and as directed.
Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position etc complete all as specified and as directed.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and as directed.
S&F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 etc complete all as specified and as directed.
S&F steel work in purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 etc complete all as specified and as directed.
M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A etc complete all as specified and as directed.
S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps etc complete all as specified and as directed.
M&L for second class hardwood as in scantlings clean sawn timber fixed etc complete all as specified and as directed.
M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm etc complete all as specified and as directed.
M&L for rendering 15 mm thick in CM (1:4) on one side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed.
M&L for rendering 12 mm thick in CM (1:6) on other side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed.
S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple etc complete all as specified and as directed.
Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each etc complete all as specified and as directed.
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames etc complete all as specified and as directed.
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed.
S&F factory made 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels complete all as specified and directed.
M&L for 35mm thick factory made 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) etc complete all as specified and as directed.
S&F Powder Coating aluminium ( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S&F for powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.
M&L for sheet glass 3mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane etc complete all as specified and as directed.
S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed.
S & F 100 size stainless steel butt hinges etc complete all as specified and as directed.
S & F 75 size stainless steel butt hinges complete all as specified and directed
Supply & Fixing 150 mm Aluminium handles, cast type, anodised etc complete all as specified and as directed.
Supply & Fixing 100 mm Aluminium handles, cast type, anodised etc complete all as specified and as directed.
S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and as directed.
S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and as directed.
S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed etc complete all as specified and as directed.
S&F in repairs mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed.
Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished fair and even without using extra cement etc complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:4) other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed.
M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of primer etc complete all as specified and as directed.
M&L for 2 mm thick Birla white putty/JK white wall care putty on walls etc complete all as specified and as directed.
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface complete all as specified and directed.
M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer on new surfaces in any tint etc complete all as specified and as directed.
All as per item No. 41.00 (here-in-before) but applying two coats of synthetic enamel paint over a coat of pink wood primer on new wooden surfaces etc complete all as specified and as directed.
M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint in any tint complete all as specified & directed.
M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed
Demolition of Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.
M&L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
M&L for 100mm thick PCC (1:2:4) type B-1(using 20 mm graded stone aggregate) as in flooring finished even and smooth without using extra cement etc complete all as specified and as directed.
Supply only Plastic dividing strips, 1.5mm thick inserted in position,Width of strip 38mm conform to design etc complete all as specified and as directed.
M&L cement concrete type C-2 (1:3:6) (using 40 mm graded stone agg) as in surface channels and drains etc complete all as specified and as directed.
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds etc complete all as specified and as directed.
S&F 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and as directed.
Material & labour for brick work with sub class 'B' bricks(using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and as directed.
Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed.
M&L for Coloured vitrified ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles exc 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and incl 15 mm thick screed bed or bedding layer in cement mortar (1:6) etc complete all as specified and as directed.
M&L for Coloured vitrified ceramic tiles 10mm thick (square/regtangular) polished ,area of each tiles exc 0.18 sqm but not exc 0.36 sqm matching with floor as in skirting etc and laid over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and as directed.
S&F for half round or other steel section for wind ties for roof with & including securing nuts, bolts and washers etc complete all as specified and as directed.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverig complete all as specified and as directed.
Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Taking Down 15mm steel tubing and connections including fittings complete all as specified and directed by Engineer-in-charge.
Taking Down 20mm steel tubing and connections including fittings complete all as specified and directed by Engineer-in-charge.
M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles , laid over and including screed bed of 10 mm thick in CM (1:4) etc complete all as specified and as directed.
M&L for factory made 30 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.
S&F in repair/new for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
M&L for Rendering 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surface finished even and fair without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surface finished even and fair with WPC @ 2% by weight of cement content and without using extra cement complete all as specified and directed.
S&F Floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring , fixed in floor , overall length of cover plate 140mm etc complete all as specified and as directed.
Hacking out old broken glass of any thicknesssize or description from wooden frames or metal frames fixed with wooden beads/ putty etc complete all as specified and as directed.
S & F sheet glass 4mm thick ordinary quality and glazing with oil putty / beads in square exc 0.50 Sq.m in each pane etc complete all as specified and as directed.
M&L for applying one coat of Synthetic paint on Old painted Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint all as specified and as directed by Engr-in-Charge.
M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work etc complete all as specified and as directed.
M & L for 25mm thick second class hard wood boarding , plained one side with butt joints as in Eaves Boards etc complete all as specified and as directed.
M&L for 15mm steel tubes medium grade galvanised with all fitting and fixed complete to walls and cellings or laid in floors complete all as specified & directed.
M&L for 20mm steel tubes medium grade galvanised with all fitting and fixed complete to walls and cellings or laid in floors complete all as specified & directed.
M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid, jointed with grey cement and no pigment complete all as specified including preperation of formation bed over 25 mm thick sand cusion and pointed in colour cement mortar 1:3 etc complete all as specified and as directed.
M&L Hardcore of gauge n.exc 63mm, deposited, spred and levelled i layer n.exc 15cm thick watered and rammed to a true surface etc complete all as specified and as directed.
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc complete all as specified and as directed.
S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc complete all as specified and as directed.
S&F of 110mm dia PVC (SWR) bends etc complete all as specified and as directed.
S&F 75mm PVC(SWR) bends etc complete all as specified and as directed.
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated , screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and as directed.
M&L for granite of 20 mm thick table rubbed and polished on platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.
S&F for anodised aluminium powder coated any colour window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.
S & F stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, as fixed in repairs complete all as specified and directed.(Make: Nirali (Kitchen Queen)/Dimond/Neelkanth/ Prayag/Blue Star).
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm as fixed in repairs complete all as specified and directed.(Make: Nirali (Kitchen Queen)/Dimond/Neelkanth/ Prayag/Blue Star).
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 20 mm thick rendering (1:4) and jointed jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified
M&L for two coats of cement based paint on walls with white or tinted including complete removal of existing treatment etc complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep etc complete all as specified and as directed.
(a) One light/Fan pointcontrolled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) One 3 pin socket outlet 5 Amps on the switch socket combination.
All as per item No- 89.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly etc complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 6A etc complete all as specified and as directed.
M&L for Socket outlet, 2 in 1, 5 pin 5A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 3 pin 6A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type etc complete all as specified and as directed. Make :Anchor/Legrand/Kinjal
M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock etc complete all as specified and as directed.
Material and labour for (concelaed Type) point wiring including necessary chases cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessories for mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing etc complete all as specified and as directed.
(a) One light/fan point controlled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the same board with other switches
(c) One 3 pin socket outlet 5 Amps on the independent board.
All as per item No.97.00 here-in-before but with 2.5 Sqmm for 3 pin 15 Amps switch socket point on independent board along with one run of 2.5 Sqmm copper conductor green in colour as earth continuity conductor connected to earth dolly complete all as specified and as directed.
M&L for Modular Switch 1 way 6A,1 module etc complete all as specified and as directed.
M&L for modular switch 1 way 16A, 1 module etc complete all as specified and as directed.
M&L for Modular Socket ,6A/2/3 pin combined 2 module etc complete all as specified and as directed.
M&L Modular Socket ,6A/16A-2/3 pin combined 2 module etc complete all as specified and as directed.
M&L for stepped type electronic fan regulator,120 W-2 module etc complete all as specified and as directed.
M&L for Metal flush box 3 module etc complete all as specified and as directed.
M&L for Metal flush box 4 module etc complete all as specified and as directed.
M&L for Metal flush box 6 module etc complete all as specified and as directed.
M&L for modular white cover plate with frame 3 module complete all as specified and as directed.
M&L for modular white cover plate with frame 4 module complete all as specified and as directed.
M&L for modular white cover plate with frame 6 module complete all as specified and as directed.
M&L for sub main wiring with two runs of 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors of , 1100 volts grade, drawn through and including PVC double locked Casing & caping incl taking down old unsv etc complete all as specified and as directed.
M&L for sub main wiring two run 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC conduit pipe complete all as specified and as directed. NOTE:- two runs of 6.0 Sq mm +one run of 6.0 Sq mm and two run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length
M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting etc complete all as specified and as directed. Make :Anchor/Legrand/Kinjal
S&F for, LED light fitting 1 x20 W (4 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting etc complete all as specified and as directed.
Taking down existing unsv building security light fitting of any description with accessories and M&L for LED 1x25W Security light fitting, drawn through including GI bracket of suitable size light grade 1.4 mtr bend to shape and MS clamps made out of flat iron of size 40x4 mm -02 Nos including nuts, bolts, washer as required and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting etc complete all as specified and as directed.
Supply and fixing round shape 18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and as directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.Make : Usha/Bajaj/CG
Supply and fix exhaust fan , heavy duty steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers complete all as specified and directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand Cat No 507611 or equivalent in ABB/Siemens
M&L for MCB SPN 40 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408636 or equivalent in ABB/Siemens
M&L for MCB SP 6-32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens
Taking down Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin etc complete all as specified and as directed.
M&L for replacement of capacitor2.5 Mfd incl making electrical connection etc complete all as specified and as directed.
M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan etc complete all as specified and as directed.
M&L for Top/bottom canopy suitable for ceiling fan of any sweep, make, model and type. Set of two etc complete all as specified and as directed.
M&L for Down rod made out of GI tubing medium grade with both side thread & hole of 15mm two feet long
M&L for copper rewinding for suitable size complete to the existing ceiling fan complete all as specifed and as directed.
Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Make : Havells/Richa/Gloster
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified ans as directed.
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed.
Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all etc complete all as specified ans as directed.
M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm etc complete all as specified ans as directed.
Supply & laying tubes ' Medium grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking out unsv GI tubing etc complete all as specified ans as directed.
Supply & laying tubes ' Medium grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 32mm dia bore including taking out unsv GI tubing etc complete all as specified ans as directed.
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable
M/S DEEKSHA ENTERPRISES
M/S MUGHATOLI AYE
PERFECT BUILDERS AND SUPPLIERS
M/S VIKASH TRADERS
M/s K P Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .