138WE/L-45/2021-22

Amount

SCHEDULE 'A' PART-I (BUILDING/STRUCTURE WORKS)

Lump sum price worked out by the tenderer for “Building Work / Structure Work” as listed in Schedule ‘A’ Part - I.

SCHEDULE 'A' PART-II SECTION-I (INTERNAL ELECTRIFICATION WORKS)

Lump sum price worked out by the tenderer for “INTERNAL ELECTRIFICATION WORK” as listed in Schedule ‘A’ Part-II(Section-I)

SCHEDULE 'A' PART-II (SECTION-II) (INTERNAL ELECTRIFICATION WORKS)

Supply and fixing decorative ultra slim polycarbonate LED light fitting 1 x 22 watt surface mounted eith accessories prewired including 1x22 watt LED tube connecting up with twin core twisted flexible copper conductor cable 1.0 Sqmm complete all as specified and as directed.

SCHEDULE 'A' PART-III SECTION-I (INTERNAL WATER SUPPLY WORK )

Lump sum price worked out by the tenderer for “INTERNAL WATER SUPPLY WORK” as listed in Schedule ‘A’ Part - III (Section -I)

SCHEDULE 'A' PART-III SECTION -II (PUFF INSULATED WATER TANK )

Supply and Installation of puff water tank of 1000 ltr capacity ,insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and resist in temperature minus 30 degree centigrades to plus 25 degree centigrades fixed in position with fittings over PCC plate form complete all as specified and as directed.

SCHEDULE 'A' PART-IV (HOT WATER SUPPLY)

Supply and fixing heating system / Hamam of capacity 1000 ltrs with diesel / kerosene burner of 5 inch with boiler and diesel / kerosene tank inner sheet made of 10 SWG mild steel sheet and outer sheet shall be made of 16 SWG of mild steel sheet.Glass wool insulation of 25 mm thickness to be provided between outer and inner sheet. 100 mm dia MS pipes is to be fitted in centre which will act as heater. One direct water connection for input of water. Funnel for pouring water manually to be provided. One over flow pipe, 3 outputs of hot water from the boiler with bib taps to be provided. Inner Chamber is to be painted with boiler paint and external steel surface are to be painted with two coats of synthetic enamal paint over a coat of red oxide including necessary components like stands for hamam, stand for fuel tank and fuel pipe for connecting burner, diesel / kerosene tank etc complete all as specified and as directed.

SCHEDULE 'A' PART-V (SECTION -I) (EXTERNAL ELECTRIFICATION WORKS)

Lump sum price worked out by the tenderer for “EXTERNAL ELECTRIFICATION WORKS” as listed in Schedule ‘A’ Part-V (Section-I)

SCHEDULE 'A' PART-V (SECTION -II) (EXTERNAL ELECTRIFICATION WORKS)

Supply, Installation, Testing and Commissioning of distribution LT panel outdoor cubical type dust and vermin proof factory made duly prewired bas bar 100 Amp rating and rubbed with sheet of suitable size and powder coated fabricated of 3.15 mm CRCA sheet mounted on frame of mild steel angle iron 40mm x 40mm x 6mm, 45 cm above the ground level duly supported with mild steel angle iron 50mm x 50 mm x 6 mm thick grouted in PCC (1:2:4), type B-1, using 20 mm graded crushed stone aggregates, front and rear opening with locking arrangement complete all as specified and as directed comprising the following accessories:- (a) MCCB 4 Pole 40 Amps, 25 KA Thermal Magnetic release (b) MCCB 4 Pole 25 Amps, 25 KA Thermal Magnetic release (c) MCCB SPN 20 Amp (d)Phase Indicator Light (e) VAF Meter 3 Phase VAF, 1A, Class

SCHEDULE 'A' PART-VI (EXTERNAL WATER SUPPLY WORKS)

Lump sum price worked out by the tenderer for “EXTERNAL WATER SUPPLY WORKS” as listed in Schedule ‘A’ Part-VI

SCHEDULE 'A' PART- VII (SEWAGE DISPOSAL WORKS)

Lump sum price worked out by the tenderer for “SEWAGE DISPOSAL WORKS” as listed in Schedule ‘A’ Part-VII

SCHEDULE 'A' PART- VIII (SITE CLEARANCE AND DEVELOPMENT WORKS

Lump sum price worked out by the tenderer for “SITE CLEARANCE AND DEVELOPMENT WORKS” as listed in Schedule ‘A’ Part -VIII

M/S R P SINGH AND COMPANY

M/S BALI CONSTRUCTIONS

LUXMI ELECTRONIC WORKS

M/S MALIK CHAND SIRI RAM

M/S STANZIN NOBROO