Construction of Infrastructure for the Proposed Peace Camps at Ingourok in Thoubal District and Kakching Khunou in Kakching District for Accommodation of UNLF Cadres (Under Peace Agreement), in Manipur.

Amount

(A). Pre-Fabricated Structure with Civil Foundation for 285 cadres

SH : (i) Pre-fabricated Houses for 10 Bedded -6 nos

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Supply and filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground surface as directed by the Engineer in charge.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4 (1 Cem : 4 C/Sand)

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders, bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

Cement plaster 1:3 (1 cement: 3 Local coarse sand) finished with a floating coat of neat cement.(i) 12mm

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (900x2020)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (650x2000)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (800x1035) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

P/F water closet squatting pan ( indian type WC pan ) with 100 mm sansd cast ieon P or s trap 101 litre low level with PVC flushing cistern inclding flush pipe with manually control device handle lever conforming to IS 7231 with all fitting and fixture complete including cutting and making goofd the wall and floor where ever requied . whitevitrous orissa pattern WC pan of size 580 x 410 mm with integral type foot reat

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 630x450 mm with a single15 mm C.P. brass pillar tap

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.- External work and making good the walls etc.Internal work - Exposed on wall (a)25 mm outer diameter pipe

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting Internal work - Exposed on wall and making good the walls etc.Internal work - Exposed on wall (a) 15 mm outer dia pipe

P/F CP bib cock of approved quality conformimg to IS 8931 (a) 15 mm diameter bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.:(a) 15 mm nominal bore

P/F UPVC soil,waste, rain water,vent pipes i/c all requisite, fittings,jointing of pipes & fittings with solvent cement, trenching,refilling & testing of joints complete as per direction of Engineer-in-charge.(a) 110 mm dia.

Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with utomatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

SH: (ii) Pre-fabricated Houses for 15 Bedded- 5 nos

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Supply and filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground surface as directed by the Engineer in charge.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4 (1 Cem : 4 C/Sand)

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders, bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

Cement plaster 1:3 (1 cement: 3 Local coarse sand) finished with a floating coat of neat cement.(i) 12mm

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (900x2020)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (650x2000)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (800x1035) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

P/F water closet squatting pan ( indian type WC pan ) with 100 mm sansd cast ieon P or s trap 101 litre low level with PVC flushing cistern inclding flush pipe with manually control device handle lever conforming to IS 7231 with all fitting and fixture complete including cutting and making goofd the wall and floor where ever requied . whitevitrous orissa pattern WC pan of size 580 x 410 mm with integral type foot reat

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 630x450 mm with a single15 mm C.P. brass pillar tap

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.- External work and making good the walls etc.Internal work - Exposed on wall (a)25 mm outer diameter pipe

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting Internal work - Exposed on wall and making good the walls etc.Internal work - Exposed on wall (a) 15 mm outer dia pipe

P/F CP bib cock of approved quality conformimg to IS 8931 (a) 15 mm diameter bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.:(a) 15 mm nominal bore

P/F UPVC soil,waste, rain water,vent pipes i/c all requisite, fittings,jointing of pipes & fittings with solvent cement, trenching,refilling & testing of joints complete as per direction of Engineer-in-charge.(a) 110 mm dia.

Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with utomatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

SH: (iii )-Pre-fabricated Houses for 50 Bedded (2 Row)

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Supply and filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground surface as directed by the Engineer in charge.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4 (1 Cem : 4 C/Sand)

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders, bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

Cement plaster 1:3 (1 cement: 3 Local coarse sand) finished with a floating coat of neat cement.(i) 12mm

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (900x2020)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (650x2000)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (800x1035) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

P/F water closet squatting pan ( indian type WC pan ) with 100 mm sansd cast ieon P or s trap 101 litre low level with PVC flushing cistern inclding flush pipe with manually control device handle lever conforming to IS 7231 with all fitting and fixture complete including cutting and making goofd the wall and floor where ever requied . whitevitrous orissa pattern WC pan of size 580 x 410 mm with integral type foot reat

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 630x450 mm with a single15 mm C.P. brass pillar tap

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.- External work and making good the walls etc.Internal work - Exposed on wall (a)25 mm outer diameter pipe

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting Internal work - Exposed on wall and making good the walls etc.Internal work - Exposed on wall (a) 15 mm outer dia pipe

P/F CP bib cock of approved quality conformimg to IS 8931 (a) 15 mm diameter bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.:(a) 15 mm nominal bore

P/F UPVC soil,waste, rain water,vent pipes i/c all requisite, fittings,jointing of pipes & fittings with solvent cement, trenching,refilling & testing of joints complete as per direction of Engineer-in-charge.(a) 110 mm dia.

Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing laying & compacting granular base/sub-base according to lines, grades& cross-sections by using naturally occurring sand gravel/conforming to IRC Grade 2 of M.O.S.T. specification free from organic or other deleterious constituents compact by rolling with power roller of 8 to10 tonnes capacity in layers not exceeding 150 mm (spread thickness)including rolling of the road surface to proper level & grade 30 cm width edging on both sides etc. complete as directed by the Engineer-in-charge. ( with 38 Km lead)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with utomatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

SH: (iv )-Pre-fabricated Houses for 50 Bedded (3 Row) - 1 no

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Supply and filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground surface as directed by the Engineer in charge.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4 (1 Cem : 4 C/Sand)

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders, bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

Cement plaster 1:3 (1 cement: 3 Local coarse sand) finished with a floating coat of neat cement.(i) 12mm

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (900x2020)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (650x2000)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (1000X1000) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

P/F water closet squatting pan ( indian type WC pan ) with 100 mm sansd cast ieon P or s trap 101 litre low level with PVC flushing cistern inclding flush pipe with manually control device handle lever conforming to IS 7231 with all fitting and fixture complete including cutting and making goofd the wall and floor where ever requied . whitevitrous orissa pattern WC pan of size 580 x 410 mm with integral type foot reat

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 630x450 mm with a single15 mm C.P. brass pillar tap

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.- External work and making good the walls etc.Internal work - Exposed on wall (a)25 mm outer diameter pipe

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting Internal work - Exposed on wall and making good the walls etc.Internal work - Exposed on wall (a) 15 mm outer dia pipe

P/F CP bib cock of approved quality conformimg to IS 8931 (a) 15 mm diameter bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.:(a) 15 mm nominal bore

P/F UPVC soil,waste, rain water,vent pipes i/c all requisite, fittings,jointing of pipes & fittings with solvent cement, trenching,refilling & testing of joints complete as per direction of Engineer-in-charge.(a) 110 mm dia.

Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing laying & compacting granular base/sub-base according to lines, grades& cross-sections by using naturally occurring sand gravel/conforming to IRC Grade 2 of M.O.S.T. specification free from organic or other deleterious constituents compact by rolling with power roller of 8 to10 tonnes capacity in layers not exceeding 150 mm (spread thickness)including rolling of the road surface to proper level & grade 30 cm width edging on both sides etc. complete as directed by the Engineer-in-charge. ( with 38 Km lead)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with utomatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

SH: (v )-Pre-fabricated Houses for Kitchen - 6 nos

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Supply and filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground surface as directed by the Engineer in charge.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4 (1 Cem : 4 C/Sand)

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders, bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

Cement plaster 1:3 (1 cement: 3 Local coarse sand) finished with a floating coat of neat cement.(i) 12mm

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (900x2020)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (650x2000)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (800x1035) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Providing and fixing white wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: single hole basin mixer

Providing and fixing brass bib cock of approved quality: a) 15 mm nominal bore

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 630x450 mm with a single15 mm C.P. brass pillar tap

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.- External work and making good the walls etc.Internal work - Exposed on wall (a)25 mm outer diameter pipe

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting Internal work - Exposed on wall and making good the walls etc.Internal work - Exposed on wall (a) 15 mm outer dia pipe

SH: (vi)- Septic Tank - 25 users (4 Nos)

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8 (1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

(b) 1:2:4 (1 cem :2 Local coarse sand:4 graded stone aggrt.20mm n/size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Suspended floors, roofs, landings, balconies and access platform,with water proof ply 12mm thick.

(b) Edges of slab and breaks in floors and walls (i) Under 20cm wide

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

P/F C.I. Cover with frame (for manhole and chambers) (i) 600 mm x 450 mm (heavy duty) (38 Kg)

SH : (vii)- Septic Tank - 65 users (3 Nos)

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8 (1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

(b) 1:2:4 (1 cem :2 Local coarse sand:4 graded stone aggrt.20mm n/size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams , suspended floors roofs having slop upto 15 degree landing balconies , shelves , chajjas lintels bands plain window sills staircases and spiral staircase above plinth level upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Suspended floors, roofs, landings, balconies and access platform,with water proof ply 12mm thick.

(c ) Edges of slab and breaks in floors and walls (i) Under 20cm wide

Brick work with 1st class common burnt clay FPS ( non modular) bricks in foundation and plinth in cement mortar 1: 4 (1 Cem:4C/Sand)

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth : (i) cement mortar 1:4 (1 cement : 4 Local coarse sand)

12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster 1:3 ( 1 cement : 3 c/ sand finished with a floating coat of neat cement on the roughside of single or half brick wall

P/F C.I. Cover with frame (for manhole and chambers) (i) 600 mm x 450 mm (heavy duty) (38 Kg)

SH : (viii)- C/o Steel staging and overhead Platform (2.2x2.2 m) PVC Tank for the W.S. & S.I. of the Bath and W.C.- 14 Nos.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cement :5 coarse sand :10graded stone aggrt. 40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrte excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including straightening, cutting bending,placing in position and binding all complete upto plinth level (a) Mild steel and medium \tensile steel bars

(b)Thermo mechanically treated bars

Centering & shuttering including strutting , propping etc and removal of form for :(a) Foundation footings, bases of columns etc. and mass concrete.

Steel work in built up tubular ( round , square or rectangular tubes etc ) trusses etc including cutting, hoisting, fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped fixing in position and applying a coat of approved steel primer including welding and bolted including special shaped

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(A) Internal work - Exposed on wall. (i) 15 mm nominal outer dia Pipes

Providing and placing on terrace polythelene water storage tank IS 12701 marked with cover and suitable loacking arangement and making holes for inlet outlt anfd over flow pile but with out fitting and base support for the tank

SH- B : Providing IEI

(SH:-Providing IEI in the 10 Beded Pre Fabricated Barrack- 6 nos.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

3 pin 5/6 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core A.I.cond. Cable and G.I. bearer wire as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

P/F 30/32 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

(SH:-Providing IEI in the 15 Beded Pre Fabricated Barrack- 5 nos.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

3 pin 5/6 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core A.I.cond. Cable and G.I. bearer wire as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

P/F 30/32 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

(SH:-Providing IEI in the 50 Beded (2 row) Pre Fabricated Barrack- 2 nos.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

3 pin 5/6 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core A.I.cond. Cable and G.I. bearer wire as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

SH:-Providing IEI in the 50 Beded (3 row) Pre Fabricated Barrack- 1 no.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

3 pin 5/6 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core A.I.cond. Cable and G.I. bearer wire as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power LED as light source Havell's JETACOMPECTOFL50W LED 757LTG complete with connection as rqd. (Havell's)

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(SH:-Providing IEI in the Kitchen Pre-Fabricated Wall with puff walling-6 nos.)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

3 pin 5/6 amps socket outlet

15/16 amps switch

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core A.I.cond. Cable and G.I. bearer wire as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

S/F 9W LED bulb.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 12"(305mm) dia light duty exhaust fan complete with all accessories(usha/ Bajaj/ Orient)

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

M/s Seven Clan Agency (BID ID -8488)

M/S KIM & SONS CONSTRUCTIONS & EQUIPMENTS (BID ID -8486)