Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAdmitted-Finance | ₹5.5 L | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | S SATYANARAYANA L1 |
|---|---|---|---|---|
| 1.00 | 1) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand). | 7.5 | Sqm | 1,200 ₹9,000 |
| 2.00 | 2) Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. | 20 | Sqm | 1,500 ₹30,000 |
| 3.00 | 3) Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete. | 65 | Sqm | 1,550 ₹1.0 L |
| 4.00 | 4) 12 mm cement plaster of mix :
1:6 (1 cement: 6 fine sand). | 25 | Sqm | 450 ₹11,250 |
| 5.00 | 5) Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm. | 85 | Sqm | 90 ₹7,650 |
| 6.00 | 6) Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 3 | No. | 1,700 ₹5,100 |
| 7.00 | 7) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall.
40 mm nominal outer dia. Pipes. | 20 | Metre | 1,200 ₹24,000 |
| 8.00 | 8) Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 2,000 | Ltr | 18 ₹36,000 |
| 9.00 | 9) Floor polishing on existing mosaic flooring including polishing the skirting with hand polish machine for removing all dirt, stains etc. Rate includes all transportation charges, labour charges, machinery etc. All complete and as per directions of Engineer-in-charge. | 160 | Sqm | 250 ₹40,000 |
| 10.00 | 10) Cleaning of exisiting sewer lines, manholes etc. Cost includes all labour for removing the silt, slush, waste etc. and rodding the sewer lines and manholes by mobile sewer rodding equipment/ manually from manhole to manhole to clear the blockage, chokages etc for proper functioning of sewer lines( The payment shall be made for removal of all blockages and cleaning all drainage lines in the compound as one job with all above operations.) | 1 | job | 6,000 ₹6,000 |
Tender Value
₹4.7 L
EMD Value
₹9,500
Closing Date
28 Jan 2026, 6:00 pmClosed
EE(C), BSNL Civil Division-I, Hyderabad
302 , 3rd floor BSNL bhavan, Adarsh Nagar, Htderabad 63
Cleaning of existing sewer lines providing repairs to exisiting doors providing new tiles in toilets along with new sanitary fittings in Type VI quarter at SP Road Secunderabad 3 rd Call
2026_BSNL_263707_1
NIT No. 154RC3/NIT/CECTSCZ/HYD/2025
Open Tender
Civil Works
60 days
SP Road, Secunderabad
Please refer Tender documents.
4 documents required · 4 mandatory
₹590
Accounts Officer (Cash), O/o PGMT, HTD, Hyderabad
₹9,500
2 Feb 2026
20 Jan 2026
30 Jan 2026
20 Jan 2026
28 Jan 2026
20 Jan 2026
1) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand).
2) Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.
3) Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete.
4) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand).
5) Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.
6) Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
7) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall. 40 mm nominal outer dia. Pipes.
8) Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
9) Floor polishing on existing mosaic flooring including polishing the skirting with hand polish machine for removing all dirt, stains etc. Rate includes all transportation charges, labour charges, machinery etc. All complete and as per directions of Engineer-in-charge.
10) Cleaning of exisiting sewer lines, manholes etc. Cost includes all labour for removing the silt, slush, waste etc. and rodding the sewer lines and manholes by mobile sewer rodding equipment/ manually from manhole to manhole to clear the blockage, chokages etc for proper functioning of sewer lines( The payment shall be made for removal of all blockages and cleaning all drainage lines in the compound as one job with all above operations.)
11) Providing PVC SWR soil waste and vent pipes conforming to IS : 13592 Type B including jointing with 'T' shaped seal/rubber ring conforming to IS : 5382 using solvent cement or rubber lubricant as the case may be with pipes of outer dia (concealed pipe joints to be jointed with rubber ring and solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant). (i) Single socketed pipe (couplings and all other accesories/Fittings are included and nothing extra shall be paid separately ).
i) 110mm diameter
ii) 75mm diameter
12) Providing and fixing of two (2) way divertor full set wall mixture with "HIGH FLOW" internal valve fixed in the wall and external trim kit consisting of LEVER or KNOB, FACE PLATE & SPOUT etc. The divertor shall be of Jaguar make of Model No. ALD-079 N or any other approved equivalent make. The external trim kit shall be of Jaguar Make, Model No. 35079 NKPM or any other approved equivalent make or Model. The SPOUT shall be of Jaguar Make Model No SPV-CHR 85429 or any other approved equivalent make or Model. The rate shall be inclusive of all materials charges including flanges, taxes, transportation costs, labour charges for fixing etc. All complete and as per the directions of the Engineer-in-charge.
13) Providing and fixing fibre reinforced plastic plain coloured sheets of 2 mm thick to the exisiting M.S. mesh frame by using necessary screws, nut-bolts, g.i. wire etc. The rate includes material cost, transportation, fixing charges, scaffolding, wastage all complete and as per the directions of the Engineer-in-charge.
14) Providing and fixing of alumninium ventilators of approximate size 1.70 M x 0.65 metre made of powder coated aluminium sections of size 50 mm x 40 mm x 2 mm. The ventilators shall be fixed with required screws, nails, nut/bolts etc to the existing opening in the bathrooms. The ventilators shall be made in 3 (three) panels wherein 2 (two) panels shall be of fixed plain float glass of 4 mm thick with required Neoprene/EPDM rubber gasket fixed to the aluminium sections with necessary powder coated aluminium glazing clips. In 1 (one) panel in the top portion provision shall be made for fixing of exhaust fan and the bottom portion shall be provided with louvers for fixing 4 mm thick pin head glass. Necessary clips arrangement in the louvers shall be made for fixing of the glass. Mosquito proof SS mesh shall be fixed to this 1 (one) panel from outside with necessary aluminum sections (aluminum powder coated flat of approximate size 40 mm x 1 mm of required length for fixing the SS mesh). The rate includes cost of all materials, labour charges, transportation, scaffolding etc. All complete and as per directions of the Engineer - in -charge.
15) Providing and fixing Stainless steel gratings of circular shape with lock system. All complete and as per directions of the Engineer-in-charge.
16) Providing and fixing of CP two in one bib cock of JAGUAR make and Model No 35041 PM or approved equivalent. Rate includes the cost of all materials including materials required for fixing, labour charges for fixing, taxes, transportation etc. All complete and as per the directions of the Engineer -in- charge.
17) Providing and fixing of CP health faucet of JAGUAR make and Model No 573 or approved equivalent. Rate includes the cost of all materials including materials required for fixing, labour charges for fixing, taxes, transportation etc. All complete and as per the directions of the Engineer -in- charge.
18) Providing and fixing of CP Single flow Over Head Shower of JAGUAR make and Model No 1989 or approved equivalent along with sower arm of JAGUAR Make and Model No. 477 P or approved equivalent along with all flanges etc. Rate includes the cost of all materials including materials required for fixing, labour charges for fixing, taxes, transportation etc. All complete and as per the directions of the Engineer -in- charge.
19) Providing and fixing of CP pillar cock of JAGUAR make and Model No T50001A1 UNO or approved equivalent along with all flanges etc. Rate includes the cost of all materials including materials required for fixing, labour charges for fixing, taxes, transportation etc. All complete and as per the directions of the Engineer -in- charge.
20) Providing and fixing of CP long body bib cock of JAGUAR make and Model No T1371A1 or approved equivalent along with all flanges etc. Rate includes the cost of all materials including materials required for fixing, labour charges for fixing, taxes, transportation etc. All complete and as per the directions of the Engineer -in- charge.
21) Providing and fixing of S.S. wired geycer connection pipes of JAGUAR make and Model No 3018 or approved equivalent. Rate includes the cost of all materials including materials required for fixing, labour charges for fixing, taxes, transportation etc. All complete and as per the directions of the Engineer -in- charge.
22) Providing and fixing of CP Swan neck type pillar cock for kitchen sink of JAGUAR make and Model No CLT 4621 or approved equivalent along with necessary flanges etc . Rate includes the cost of all materials including materials required for fixing, labour charges for fixing, taxes, transportation etc. All complete and as per the directions of the Engineer -in- charge.
23) Providing and fixing of CP towel rail of approved design. Rate includes the cost of all materials including materials required for fixing, labour charges for fixing, taxes, transportation etc. All complete and as per the directions of the Engineer -in- charge.
24) Providing and fixing of CP soap dish of approved design. Rate includes the cost of all materials including materials required for fixing, labour charges for fixing, taxes, transportation etc. All complete and as per the directions of the Engineer -in- charge.
25) Providing and fixing of mirror of approximate size 1.50 m x 0.60 m of 5 mm thick. The mirror is to be fixed to the wall by providing of 4 Nos studs including making necessary holes in the mirror. The edges of the mirror are to be grinded and polished. All complete and as per the dirtections of the Engineer - in - charge.
26) Providing and fixing of carpet grass of approved quality along with providing and mixing of vermi compost. The rate includes cost of carpet grass, vermicompost, transportation of grass & vermicompost, labour charges for fixing, all taxes etc and nothing extra shall be paid on any account. All complete and as per the dirtections of the Engineer - in - charge.
27) Providing and fixing of Netlon mosquito proof removable mesh with velcro fixed to windows. The mesh shall be of Saint Gobain make or of approved equivalent make. The velcro shall be fixed to the window frame by using necessary screws, nails etc and the mesh shall be fixed to the windows. The rate includes cost of netlon mesh, all other materials required for fixing, transportation, labour charges for fixing, all taxes etc and nothing extra shall be paid on any account. All complete and as per the directions of the Engineer - in - charge.
28) Removing of existing grills from the CPMG quarter and re-fixing the same grills in Type-VI quarter by making necessary modifications such as proividing of new aldrops, hinges etc for gate in the grill. The grill shall extended by providing necessary MS frame work and fixing of MS 75 x 25 mm mesh for increasing the height or length of the grill. All the MS materials provided for frame works & the 75 x 25 mm MS mesh provided shall be measured in the relevant items. All complete and as per directions of the Engineer-in-charge.
29) Providing of plants / shrubs along with pots. The plants shall be provided as approved by Engineer - in - charge. Approximately 50 Nos of pots with plants shall be supplied. The rate includes cost of plants with pots, transportation, labour charges for loading & unloading and placing at designated place, all taxes etc and nothing extra shall be paid on any account. All complete and as per the dirtections of the Engineer - in - charge.
30) Providing of necessary repairs to the exisiting doors by removing the doors and re-fixing the same after attending to all repairs. All complete and as per the directions of the Engineer-in-charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.33 MB
BOQ_305910.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid