WELLCOME MAINT SERVICES CONNECTING BR WORK AND REPAIR REPLACEMENT OF ROOF TREATMENT GI TUBING PVC TANK CERTAIN BR WORKS FOR MD ACCN IN OUTSIDE POCKET AREA AT AF STN GWALIOR

Amount

M&L for complete removal of existing treatment by scrapping with machnical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.

M&L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 2 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface.

M&L for one coat of acrylic waterbased interior grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for preparation of old plastered surfaces of walls applying one coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying one coat of oil emulsion distemper on old decorated surface of wall etc, complete all as specified and directed.

M&L one coat of synthetic enamel paint over old painted surface of wood work of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed.

~Ditto all as per item No- 07 here in before but one coat of synthetic enamel paint on steel surface complete all as specified and directed.

Preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of white wash, complete all as specified and directed.

Preparation of old decorated surfaces of Ceiling including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of white wash, complete all as specified and directed.

S & F in repair 140 mm door stopper of aluminium body and tongue, anodised with hard drawn steel spring, fixed complete all as specified and directed.

S & F in repair of steel door spring of size 200 mm in wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed.

M&L for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quantity or description) from wooden frame/Steel frame complete all as directed.

S & F in repair kitchen plate rack of stainless steel of size 720 x 600 x 230mm made out of 1mm thick stainless steel sheet all as specified and directed

S&F in repairs seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified and directed.

Supply and fix in repairs of PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessories to wall complete all as specified and directed.

S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and 15mm bore CP, brass pillar Tap fancy type and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe( overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm), complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall finished fair & smooth in CM 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick wall with mixing WPC as per manufacture direction finished fair & even complete all as specified and directed. Note:- WPC shall be measured and paid saperatly.

Supply only liquid water proofing compoud

M & L for rendering 5 mm thick in CM 1:4 on concrete surfaces as on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including one coat of primer , complete all as specified and directed.

M & L preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying two coats of cement base paint over and including one coat of primer, complete all as specified and directed.

M&L for cleaning of overhead tank of any description and in position, removing all scale and dirt by detergent/detergent powder and finally disinfected with bleach wash etc from tanks and mouths of circulating pipes etc and writing the date of cleaning and the due date of cleaning, capacity of tanks exc. 250 litres and not exc. 500 litres complete all as specified and as directed.

~Ditto~ all as per item No 28 above but exc 500 & n.exc. 1000 ltrs capacity complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

~Ditto~ all as per item No 30 above but 20mm bore.

M&L for re-fixing of old steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified and as directed. Note:- Old GI pipe shall be Re-used retrived from item No. 30 above.

~Ditto~ all as per item No 32 above but 20mm bore. Note:- Old GI pipe shall be Re-used retrived from item No. 31 above.

S&F GI tubing 15mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.

~Ditto~ all as per item No 34 above but 20mm bore.

S & F in replacemet of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) triple layer of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S & F in replacemet of 1000 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) triple layer of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S&F in repair tank cover black of size /shape for water tanks of storage capacity exc 250 ltr but not exc 500 ltr each (with necessary fixing/ locking arrangement) to suit the existing provision complete all as specified & directed.

S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed.

S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 25mm bore pipe minimum weight 455 gms complete all as specified and as directed.

Repair leakage of 15 mm bore CP bib tap/ Pillar tap/ stop cock by replacing of necessary brass spindles as required complete all as specified and directed.

S&F in repair Brass chromium plated health faucets with flexible pipe length not less than 1.00 (minium) fixed for EWC/IWC suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repairs PTMT waste coupling 32x100mm sink, complete all as specified and directed.

S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F in repair stop valve cast copper alloy fency type with long shank and cup (concealed type) with crutch or butterfly handle screwed downboth ends for high pressure as per ISI suitable for 15mm dia iron pipe.

S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S&F in repair 15 mm dia angle Stop valves, of PTMT approved any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms), complete all as specified and as directed.

S&F in repair 15 mm dia, bib tap standard of PTMT approved colour high pressure screwed for iron pipe and fixed, (minimum weight 105 gms), complete all as specified and as directed.

S&F in repair 15 mm dia, fancy type pillar tap of PTMT approved colour high pressure screwed for iron pipe and fixed (minimum weight 120 gms), complete all as specified and as directed.

S & F in repair, fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs PTMT waste pipe 32 x 800 mm for WHB / sink, complete all as specified and directed.

S&F for brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with rawl plugs. all as specified.

S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed.

S&F in repair shelf of PTMT fixed with and incl CP brass screws and or any other fixing arrangement (min weight 300 gms), complete all as specified and directed.

S & F in repairs Swivel shower of PTMT approved colour for fixing with 15 mm pipe, (Minimum weight 40 grms), including Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour, (Minimum weight 40 grms), complete all as specified and as directed.

Taking down and re-fixing of old aluminum window in same opening with necessary required repairs and fittings including glass rubber bedding and glazing clips (Glass pan and wire gauge will be measured and paid separately are n. exc 2.00 sqm each complete all as specified and directed.

S&F in repairs 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane with wooden beads incl hacking out old broken glass pane of any thickness and size complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed.

S & F in repair 100mm M.S butt hinges with MS frame work by spot welding incl necessary arrangement and handling of welding machine upto third floor of Bldg complete all as specified and directed.

S&F in repair fancy type decorated SS curtain hanging rods 25 mm dia including brackets, including fixing arrangement and making up repair work and all fitting complete all as specified and directed.

Supply and fixing of rubber beading 40 mm strip in bottom of door complete all as specified and directed.

S&F in repair Mild steel Mortice lock double handle, vertical type, 06 levers for door complete all as spd and directed.

S & F in repair auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinete shutter complete all as specified and directed.

S&F in repair stainless steel handles of 100mm size for kitchen cabinate shutter complete all as specified and directed.

S&F in repairs of 15mm bore fancy type overhead shower with arm swivel joint brass chromium plated screwed down complete all as specified and directed.

S&F in repair of internal fittings Kit complete for vitreous china flush cistern with twin flush as per site requirment complete all as specified and directed.

S&F in repairs two way bib cock, brass CP mixture for mixing hot & cold water complete all as specified and as directed.

S&F in repairs stainless steel drawer telescopic channel of size 500mm long of load bearing capacity 35 Kg complete all as specified and directed.

S&F in repairs stainless steel drawer telescopic channel of size 550mm long of load bearing capacity 35 Kg complete all as specified and directed.

S&F in repairs stainless steel drawer telescopic channel of size 600mm long of load bearing capacity 35 Kg complete all as specified and directed.

S&F cast brass cabinet cather of size 20mmx50mm and suitable for shutter complete all as specified and directed

S&F front glass Shelf 8mm thick (chrome finish) of size 300mmx150mm fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

S&F corner galss shelf 8mm thick (pack of three) of (chrome finish) fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

S&F high quality plastic bathroom cabinet of size 550 x 342 x 125mm consisting front looking mirror and four to five inner compartments fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

S&F toilet paper holder as approved by GE complete all as specified and directed

Refixing of shutters including taking down of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s) after resecuring or easing & adjusting, complete all as specified and directed.

Demolition of cement concrete/lime concrete in roofs in any condition and discription complete all as specified and directed

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof padding concrete as in leveling course to maintain the true roof slope, roof kerb or mud stops rounded or chamfered in edges etc, finish even & fair without using extra cement, complete all as specified and directed

M&L for apply acrlic based waerproofing flexible liquid applied single component, weather resistant acrylic waterprrofing membrane for all types of exposed roof slabs (new and old) terraces (slopped and flat) etc ultra voilet rays and heat reflecting system having following key performance properties :- 1. Acrylic polymer dispersion single component liquid applied system Sika Cool coat not less than 650 micron (1.2mm system built up) contains cross linking polymers, Special Glass Micro fibres, pigments and advance antifungal additive that provided long lasting tough water proofing membrane conforms to IS101, IS2645, EN1542, ASTM D 5589, ASTM D 5590, ASTM C 1202-08, ASTM D 4587, ASTM C 836, ASTM E1980, EN-673, EN-410. It should have solid content -66% (by weight) VOC <10gm/L complies to green building standards and should meet the properties of adhesive strength on cement after 14 days curing ≥1.5 N/mm2 as per ASTM C-836, Water absorption (% by mass)<10% as per ASTM D570, Solar reflectance index not less tha 100 (+-5%) (low wind to high wind condition), Elongation qat break (%) 200% as per ASTM D412, Algae & fungal resistance as per ASTM D-5590, Shore A hardness 45 after 1 month and should pass Accelerated weathering , 500 hours without any cracking, blistering & 100% gloss retention as per ASTM d 4587. 2. Fully reinforced with glass fibre reinforced Sika Fab 1 3. The roofing system should be compatible with Bitumen system Providing and applying primer over the prepared surface with Sika Cool coat primer @ coverage 0.1-0.12kg/m2 Sika cool coat primer , consumption @ 0.05-0.08kg/m2 all as per specification & direction of the engineer -in-charge

Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical of Sika/M/s Choksey/fosroc or equivalent as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Bath seal tape product of Sika/M/s Choksey/fosroc or equivalent and grouting around the inserted pipes by porable Sika/M/s Choksey/fosroc or equivalent bath seal grout as directed. (d) Make angle fillets by mixing sand cement of Sika/M/s Choksey/fosroc or equivalent on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Sika/M/s Choksey/fosroc or equivalent bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Sika/M/s Choksey/fosroc or equivalent as per amnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with Sika/M/s Choksey/fosroc or equivalent sealing compounds complete.

Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material n exc 2.5 KM distance and depositing where as directed, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified and directed.

M&L for 25 thick PCC 1:2:4 type B-O using 12.5 mm gradred stone aggregate as in levelling course finished even an fair complete all as specified and directed.

M&L for non skid coloured ceramic floor tiles 7- 8 mm thick (square/ rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM (1:6 )complete all as specified and directed.

M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including rendering 10 mm thick in CM 1:3 on wall complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 litre but n. exc 500 litre for repair of roof treatment work and refixing the same with new fittings after repair roof tretment work complete all as specified and directed.

Disconnecting existing tanks of capacity exc 500 litre but n. exc 1000 litre for repair of roof treatment work and refixing the same with new fittings after repair roof tretment work complete all as specified and directed.

S & F in repair 18mm thick UPVC board of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawer including demolition of existing board any type or specification complete all as specified and directed.

~Ditto~ all as per ser Item No 88 above but one side prelaminated type

~Ditto~ all as per ser Item No 88 above above but 12 mm thick both side plain

S & F continuous (Piono) hinges ,mild steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed.

S&F mild stainless steel magnet catchers for the cupboards/cabinate (including necessary fixing arrangement) complete all as specified and directed.

S&F aluminum handles cast type anodized 150 mm size complete all as specified and directed.

S&F 125 mm size, Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repair mild steel heavy duty curtain hanging rods 20 mm dia including brackets, including fixing arrangement and making up repair work and all fitting complete all as specified and directed.

Taking down eaves gutters and rain water pipes of only size/ pattern with all the fittings complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/ walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends and fixed in position with adhesive complete all as specified and directed.

Repairing of leakage in concealed stop cock 15/20 mm bore by replacing of necessary brass spindles half round turn/full round turn as required complete all as specified and directed.

taking down and Refixing old flushing cisterns of any capacity complete with bend and bend pipe and connecting to WC after making it functional by adjusting the level of floatt valve, replacing rubber waster etc complete all as specified and directed.

J.N.R. Engineers and Builders

M/s Manish Contractor

M/S YOGANSH CONSTRUCTION CO.