Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.6 CrAccepted-AOC | ₹16.6 Cr | L1 | Accepted-AOC L1 |
Tender Value
₹21.1 Cr
EMD Value
₹21.1 L
Closing Date
14 Jun 2023, 3:00 pmClosed
Execkutive Officer, Kulasekharam Town Panchayat
Execkutive Officer, Kulasekharam Town Panchayat
Improvements to Existing Water Supply Distribution System and Providing Balance House Service Connections to Kulasekaram Town Panchayat under AMRUT 2.0 Scheme
2023_DTP_315734_1
269/2022/A1
Open Tender
Civil Works - Water Works
180 days
Kulasekharam
I Calss
2 documents required · 2 mandatory
₹0
₹21.1 L
Yes
Kulasekharam Town Panchayat Office
14 Dec 2024
16 May 2023
14 Jun 2023
16 May 2023
14 Jun 2023
16 May 2023
16 May 2023 - 14 Jun 2023
8 Jun 2023
Amount
Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers. Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandy loam and ordinary soil Pumping Main 315mm - HDPE PN 10
250mm - HDPE PN 10
Feeder System 140mm HDPE PN 10
110mm HDPE PN 10
90mm HDPE PN 10
Distribution System 315mmHDPE PN 6
250mmHDPE PN 6
200mmHDPE PN 6
160mmHDPE PN 6
140mmHDPE PN 6
110mmHDPE PN 6
90mmHDPE PN 6
Supplying and conveying to site, the following sizes of HDPE pipes of class PN6 (PE-100) & PN6 (PE-60) confirming to IS:4984/1995, as specified in Technical Specifications in standard lengths including labour charges for loading, unloading and stacking at site and transportation charges etc., complete as per standard specifications and as directed by the Engineer in Charge Pumping Main 315mmHDPE PN 10
250mmHDPE PN 10
Feeder System 140mmHDPE PN 10
110mmHDPE PN 10
90mmHDPE PN 10
Distribution System 315mmHDPE PN 6
250mmHDPE PN 6
200mmHDPE PN 6
160mmHDPE PN 6
140mmHDPE PN 6
110mmHDPE PN 6
90mmHDPE PN 6
Loweing HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the Department Officers Pumping Main 315mmHDPE PN 10
250mmHDPE PN 10
Feeder System 140mmHDPE PN 10
110mmHDPE PN 10
90mmHDPE PN 10
Distribution System 315mmHDPE PN 6
250mmHDPE PN 6
200mmHDPE PN 6
160mmHDPE PN 6
140mmHDPE PN 6
110mmHDPE PN 6
90mmHDPE PN 6
Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed by Department Officers. Pumping Main 315mmHDPE PN 10
250mmHDPE PN 10
Feeder System 140mmHDPE PN 10
110mmHDPE PN 10
90mmHDPE PN 10
Distribution System 315mmHDPE PN 6
250mmHDPE PN 6
200mmHDPE PN 6
160mmHDPE PN 6
140mmHDPE PN 6
110mmHDPE PN 6
90mmHDPE PN 6
Supply, delivery of HDPE Specials As Per IS 1736-1995 including unloading, transportation and stacking charges. Specials for HDPE pipes as per IS 8360/1977/Part 1(Reaffirmed 1992) Part II and III(Reaffirmed 2002). Reaffirmed to IS 4984-2016 conveyance to work site etc., complete as directed by the Engineer in charge a) Equal Tees (i) Pumping Main 315mmdia HDPE PN10
250mmdia HDPE PN10
(ii) Feeder System 140mmdia HDPE PN 6
110mmdia HDPE PN 6
90mmdia HDPE PN 6
(iii) Distribution System 315mmHDPE PN 6
250mmHDPE PN 6
200mmHDPE PN 6
160mmHDPE PN 6
140mmHDPE PN 6
110mmHDPE PN 6
90mmHDPE PN 6
b) Bends - 90 Degree Bend PN6 i) Pumping Main 315mmdia HDPE PN10
250mmdia HDPE PN10
ii) Feeder System 140mmdia HDPE PN 6
110mmdia HDPE PN 6
90mmdia HDPE PN 6
iii) Distribution System 315mmHDPE PN 6
250mmHDPE PN 6
200mmHDPE PN 6
160mmHDPE PN 6
140mmHDPE PN 6
110mmHDPE PN 6
90mmHDPE PN 6
c) End Caps i) Distribution System 250mmHDPE PN 6
200mmHDPE PN 6
160mmHDPE PN 6
140mmHDPE PN 6
110mmHDPE PN 6
90mmHDPE PN 6
Supply, delivery to site, fixing, & commissioning of CI Scour valve including specials C.I. A/F Tee, PVC Tail Piece, C.I. D/F Pipe, C.I. Sluice Valve, C.I. Double foot Bend, C.I. Semicircular bend, Surface Box, Bolt Nut & Rubber Insertion. etc complete as per specification i) Feeder System a) 80mm CI Scour Valve in 90mm HDPE - 3 No. 80 x 80 x 80. mm C.I. A/F Tee 90 mm P.V.C. T.P. with flange 80 mm x 2.75 m C.I. D/F Pipe 80 mm x 0.75 m C.I. D/F Pipe 80 mm CI D/F Sluice Valve 80 mm C.I. Duck Foot bend 80 mm x 1.00 m C.I. D/F Pipe 80 mm C.I.Semicircular bend Bolt , Nut & Rubber insertion D/F joint - 80 mm
b) 80mm Scour Valve in 110mm HDPE - 1 No. 100 x 100 x 80 mm C.I. A/F Tee 110 mm P.V.C. Flanged Tail Piece 80 mm x 2.75 m C.I. D/F Pipe 80 mm x 0.75 m C.I. D/F Pipe 80 mm CI D/F Sluice Valve 80 mm C.I. Duck Foot bend 80 mm x 1.00 m C.I. D/F Pipe 80 mm C.I.Semicircular bend Bolt , Nut & Rubber insertion D/F joint - 80 mm Bolt , Nut & Rubber insertion D/F joint - 100 mm
ii) Feeder System a) 80mm CI Scour Valve in 90mm HDPE - 3 No. 80 x 80 x 80. mm C.I. A/F Tee 90 mm P.V.C. T.P. with flange 80 mm x 2.75 m C.I. D/F Pipe 80 mm x 0.75 m C.I. D/F Pipe 80 mm CI D/F Sluice Valve 80 mm C.I. Duck Foot bend 80 mm x 1.00 m C.I. D/F Pipe 80 mm C.I.Semicircular bend Bolt , Nut & Rubber insertion D/F joint - 80 mm
b) 80mm Scour Valve in 110mm HDPE - 8 No. 100 x 100 x 80 mm C.I. A/F Tee 110 mm P.V.C. Flanged Tail Piece 80 mm x 2.75 m C.I. D/F Pipe 80 mm x 0.75 m C.I. D/F Pipe 80 mm CI D/F Sluice Valve 80 mm C.I. Duck Foot bend 80 mm x 1.00 m C.I. D/F Pipe 80 mm C.I.Semicircular bend Bolt , Nut & Rubber insertion D/F joint - 80 mm Bolt , Nut & Rubber insertion D/F joint - 100 mm
c) 100 mm CI Scour Valve in 140 mm HDPE - 3 No. 125 x 125 x 100 mm C.I. A/F Tee - 1 No 140 mm P.V.C. T.P. with flange - 2 Nos 100 mm x 2.75 m C.I. D/F Pipe - 1 No 100 mm x 0.75 m C.I. D/F Pipe - 2 Nos 100 mm CI D/F Sluice Valve -1 No 100 mm C.I. D'Foot bend - 1 No 100 mm x 1.00 m C.I. D/F Pipe - 1 No 100 mm C.I.Semicircular bend - 1 No Bolt , Nut & Rubber insertion D/F joint - 100 mm - 7 Nos. Bolt , Nut & Rubber insertion D/F joint - 125 mm - 2 Nos.
d) 100 mm CI Scour Valve in 160 mm HDPE - 4 No. 150 x 150 x 100 mm C.I. A/F Tee - 1 No 160 mm P.V.C. T.P. with flange - 2 Nos 100 mm x 2.75 m C.I. D/F Pipe - 1 No 100 mm x 0.75 m C.I. D/F Pipe - 2 Nos 100 mm CI D/F Sluice Valve -1 No 100 mm C.I. D'Foot bend - 1 No 100 mm x 1.00 m C.I. D/F Pipe - 1 No 100 mm C.I.Semicircular bend - 1 No Bolt , Nut & Rubber insertion D/F joint - 100 mm - 7 Nos. Bolt , Nut & Rubber insertion D/F joint - 125 mm - 2 Nos.
e) 125 mm CI Scour Valve in 200 mm HDPE - 4 No. 200 x 200 x 125 mm C.I. A/F Tee - 1 No 200mm PVC Flanged Tail Piece - 2 Nos 125 mm x 2.75 m C.I. D/F Pipe - 1 No 125 mm x 0.75 m C.I. D/F Pipe - 2 Nos 125 mm CI D/F Sluice Valve -1 No 125 mm C.I. DuckFoot bend - 1 No 125 mm x 1.00 m C.I. D/F Pipe - 1 No 125 mm C.I.Semicircular bend - 1 No Bolt , Nut & Rubber insertion D/F joint - 125 mm - 7 Nos. Bolt , Nut & Rubber insertion D/F joint - 200 mm - 2 Nos.
f) 125 mm CI Scour Valve in 250 mm HDPE - 1 No. 250 x 250 x 125 mm C.I. A/F Tee - 1 No 250mm PVC Flanged Tail Piece - 2 Nos 125 mm x 2.75 m C.I. D/F Pipe - 1 No 125 mm x 0.75 m C.I. D/F Pipe - 2 Nos 125 mm CI D/F Sluice Valve -1 No 125 mm C.I. DuckFoot bend - 1 No 125 mm x 1.00 m C.I. D/F Pipe - 1 No 125 mm C.I.Semicircular bend - 1 No Bolt , Nut & Rubber insertion D/F joint - 125 mm - 7 Nos. Bolt , Nut & Rubber insertion D/F joint - 250 mm - 2 Nos.
Supply delivery to site, fixing & Commisioning of kinetic air valve for handling more volumes of air in pumping main, double orifice kinetic air valve confirming to IS 14845 tamper proof design (PN-1) and with 5 years warranty including loading and unloading at site, transporting charges taxes and duties etc., as directed by the engineers of the following sizes. 50mm Double Air Valve
Barricading work (Where the lines are in narrow width of municipality area, busy streets like Market, Bus-stand and in the Highways etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia. and 1.80m height) vertical with horizontal poles in two rows, painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including supplying, delivery and fixing of GI sheet (0.90m x 0.8mm thick) in the horizontal poles and fixing 75mm dia. reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as directed by Department Official.
Barricading work (Where, there is less traffic areas and broader roads etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia and 1.80m height) vertical with horizontal poles in three rows including painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including fixing charges and fixing 75mm dia reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as directed by Department officers.
a) Refilling the trenches with excavated earth (other than sand) in layers and watering, ramming and consolidation as per standard specification etc complete and as directed by Engineer in charge i) Pumping Main 315mmdia HDPE PN10
250mmdia HDPE PN10
ii) Feeder System 140mmdia HDPE PN 6
110mmdia HDPE PN 6
90mmdia HDPE PN 6
iii) Distribution System 315mmHDPE PN 6
250mmHDPE PN 6
200mmHDPE PN 6
160mmHDPE PN 6
140mmHDPE PN 6
110mmHDPE PN 6
90mmHDPE PN 6
Labour charges for cutting of B.T road or WBM roads for laying of mains and as directed by Engineer in charge. B.T Road
Labour charges for cutting of C.C road for laying of mains and as directed by Engineer in charge. C.C Road
Testing of pipes for water supply with hydraulic testing equipment by filling with water (including cost of water) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes i) Pumping Main 315mmdia HDPE PN10
250mmdia HDPE PN10
ii) Feeder System 140mmdia HDPE PN 6
110mmdia HDPE PN 6
90mmdia HDPE PN 6
iii) Distribution System 315mmHDPE PN 6
250mmHDPE PN 6
200mmHDPE PN 6
160mmHDPE PN 6
140mmHDPE PN 6
110mmHDPE PN 6
90mmHDPE PN 6
Supply, delivery to site, fixing, & commissioning of CI Sluice valve, Pressure Reducing and flow limit control valve, Electromagnetic flow meter including specials C.I. D/F pipe, PVC Tail Piece with Flange, Bolt Nut & Rubber Insertion (exluding Valve Pit) A) 100 mm Sluice Valve, 100mm Flow Control Valve, 100 mm Electromagnetic Flow meter in 110 mm HDPE PN6 main - 5 Nos. 100 mm CI D/F Sluice Valve - 1 No. 100 mm DI D/F Pressure Reducing and Flow Limit Control Valve - 1 No. 100 mm D/F Full Bore Electromagnetic Flow Meter - 1 No 100 mm x 0.20 m C.I.D/F Pipe - 2Nos 100 mm x 0.75 m C.I.D/F Pipe - 2Nos 110 mm PVC Tailpiece with flange - 2 Nos Bolt , Nut & Rubber insertion - 100mm - 8 Nos
b) 150 mm Sluice Valve, 150 mm Flow Control Valve, 150 mm Electromagnetic Flow meter in 160 mm HDPE PN6 main - 9 Nos. 150 mm CI D/F Sluice Valve - 1 No. 150 mm DI D/F Pressure Reducing and Flow Limit Control Valve - 1 No. 150 mm D/F Full Bore Electromagnetic Flow Meter - 1 No. 150 mm x 0.30 m C.I.D/F Pipe-2 Nos 150 mm x 0.75 m C.I.D/F Pipe-2 Nos 160 mm PVC Tailpiece with flange - 2 Nos. Bolt , Nut & Rubber insertion - 150mm - 8 Nos.
c) 200mm Sluice Valve, 200mm Flow Control Valve, 200mm Electromagnetic Flow meter - 10 Nos. 200 mm CI D/F Sluice Valve - 1 No. 200 mm DI D/F Pressure Reducing and Flow Limit Control Valve - 1 No. 200 mm D/F Full Bore Electromagnetic Flow Meter - 1 No. 200 mm x 0.40 m C.I.D/F Pipe-2 Nos 200 mm x 0.75 m C.I.D/F Pipe-2 Nos 200 mm PVC Tailpiece with flange - 2 Nos. Bolt , Nut & Rubber insertion - 200mm - 8 Nos.
d) 250mm Sluice Valve, 250mm Flow Control Valve, 250mm Electromagnetic Flow meter - 7 No. 200 mm CI D/F Sluice Valve - 1 No. 200 mm DI D/F Pressure Reducing and Flow Limit Control Valve - 1 No. 200 mm D/F Full Bore Electromagnetic Flow Meter - 1 No. 200 mm x 0.40 m C.I.D/F Pipe-2 Nos 200 mm x 0.75 m C.I.D/F Pipe-2 Nos 200 mm PVC Tailpiece with flange - 2 Nos. Bolt , Nut & Rubber insertion - 200mm - 8 Nos.
For 140mm & 160mm Dia. HDPE Pipe - 2.27m x 1.30m x 1.20m
For 200mm Dia. HDPE Pipe - 2.65m x 1.30m x 1.25m
For 140mm Dia. HDPE Pipe - 3.10m x 1.30m x 1.35m
Providing House service connection with MDPE 20mm pipe (supply, lowering, jointing & testing), electrofusion tapping saddle PE 80 blue, PN 12.5 with female threaded metal insert of SS 304, brass ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and the corresponding bore sizes of 15mm dia size (1/2"), Poly Propylene compression male threaded adaptor with metal insert of SS 304, Poly Propylene 90 degree compression elbow with compression joint at both ends, Poly Propylene compression female threaded adaptor with metal insert of SS 304 and protection box of size 20cm X 30cm for fixing of water meter all as per standard including road cutting, replacement of utilities providing house service connection, refillin, retoration of roads/ drains testing etc complete with materials and specification as instructed by department officers. CC Road
Cement concrete of mix 1:4:8 (one part of cement four part of crushed stone sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with SS. Upto 1.5m below GL
1.5m to 4.5m below GL
Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification Road Restoration
Earth work excavation and depositing on bank with initial lead 10m and lift of 2.0m in the following classification of soils, bailing out water wherever necessary including providing danger lights etc., and as directed as per specification SS 20B Depth upto 2.00m a) hard stiff clay, stiff black cotton soil, hard red earth , shales, murams,gravel, stoney earth and earth mixed with small boulders and hard gravelly soil
b) Soft disintegrated rock, laterite, soft rock or kankar, not requiring blasting
c) Medium Rock and Dense Medium Rock not requiring
Second Depth 2.00m - 3.00m d) Medium Rock and Dense Medium Rock not requiring
Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.
Providing and Iaying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000, using 20 mm and down graded hard broken granite, stone jelly for all RCC items of works with minimum cement content of 400 kg/m³ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 m³) 7730 Kg. of 20 mm machine crushed stone jelly and with about (3.3 m³) 5156 kg. of 10 - 12 mm machine crushed stone jelly and with about (4.79 m³) 7670 Kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra, etc complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. a) Beyond 1.5 m below GL
b) Below GL & upto 1.5 m
c) Above G.L upto 4.50m height
d) Above 4.50m to 7.32m ht., from G.L
e) Above 7.32m to 10.98m ht., from G.L
f) Above 10.98m to 14.64m ht., from G.L
g) Above 14.64m ht., to 18.30m ht.,
h) Above 18.30 m to 21.96m ht., from G.L
Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc. Centering for soffits of RCC slabs plain surface including strutting upto 3.29 meter height using mild steel of size 90 cm x 60 cm x 10 gauge with MS angles of size 25 mm x 2 mm x 3 mm laid over silver oak (CW) joists of size 10 cm x 6 cm spaced upto 90 cm c/c and supported casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specification and as directed by the departmental officer Data SIDE SURFACE Up to 3.30m Above GL
PLAIN SURFACE Up to 3.30m Above GL
3.30 - 4.30m above GL
4.30 - 5.30m above GL
6.30 - 7.30m above GL
7.30 - 8.30m above GL
10.30 - 11.30m above GL
11.30 - 12.30m above GL
15.30 - 16.30m above GL
SQUARE COLUMN SURFACE Up to 3.30m above GL
3.30 - 4.30m above GL
4.30 - 5.30m above GL
5.30 - 6.30m above GL
6.30 - 7.30m above GL
7.30 - 8.30m above GL
8.30 - 9.30m above GL
9.30 - 10.30m above GL
10.30 - 11.30m above GL
11.30 - 12.30m above GL
12.30 - 13.30m above GL
13.30 - 14.30m above GL
14.30 - 15.30m above GL
15.30 - 16.30m above GL
CIRCULAR COLUMN SURFACE Up to 3.30m above GL
3.30 - 4.30m above GL
4.30 - 5.30m above GL
5.30 - 6.30m above GL
6.30 - 7.30m above GL
7.30 - 8.30m above GL
8.30 - 9.30m above GL
9.30 - 10.30m above GL
10.30 - 11.30m above GL
11.30 - 12.30m above GL
12.30 - 13.30m above GL
13.30 - 14.30m above GL
14.30 - 15.30m above GL
15.30 - 16.30m above GL
CURVED SURFACE Up to 3.30m above GL
3.30 - 4.30m above GL
14.30 - 15.30m above GL
15.30 - 16.30m above GL
Supplying, fabricating & placing in position of Steel Reinforcement using mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position & binding with binding wire and all labour charges for cutting, bending, tying & placing in position etc.
Brick work 11.50 cm thick in cement mortar 1:3 (one part of cement three part of crushed stone sand) using country bricks of size 8¾"x4¼"x2¾" including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification. Pump Room - 6m x 4m - 2 Nos. Height Upto 4.50m
Height Upto 4.50m - 9.00m
Ceiling plastering and finishing all RCC exposed surface such as RCC slabs, sunshade canopies, stair case steps, landing slab, etc. with cement mortar 1:3 (one part of cement three part of plastering sand) 10 mm thick including packing the surface and provided necessary cement mortar nosing, headings as per the size specification wherever necessary using the same mix as directed by the departmental officers etc. complete complying with standard specification. Pump Room - 6m x 4m - 2 Nos.
Plastering the surface of walls with cement mortar 1:3 mix (one part of cement and three part of plastering sand) 12 mm thick finishing including cost and conveyance of all materials and labour charges for curing and all other incidental charges etc., complete complying with standard specification. Pump Room - 6m x 4m - 2 Nos.
Plastering in cement mortar 1:3 mix (one part of cement and three part of plastering sand) 20 mm thick finishing including cost and conveyance of all materials and labour charges for curing and all other incidental charges etc., complete complying with standard specification. Pump Room - 6m x 4m - 2 Nos.
Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over a priming coat including through scrabing clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc complete as per standard specification and as directed by the department officers. Pump Room - 6m x 4m - 2 Nos.
Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete Pump Room - 6m x 4m - 2 Nos.
Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. Pump Room - 6m x 4m - 2 Nos. Fully panelled Double leaf - Window (without Ventilator) - 1.20 m x 0.90 m
Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., Pump Room - 6m x 4m - 2 Nos. ROLLING SHUTTERS (WITH ISI MONOGRAM) Manually operated (up to 8 m2 area)
2T capacity hand operated over head Travelling (HOT) crane suitable for a span upto 6 Mtrs, and travel length upto 10 Mtrs. with clear lift upto 6 Mtrs. including gear type chain pulley block with GI chain and geared Travelling trolley complete with all accessories including girder Pump Room - 6m x 4m - 2 Nos.
Painting the new walls two coats with one coat of priming with best cement paint of approved colour and quality including preparation of surface and finishing neatly etc complete complying with standard specification and as directed by the department officers.
Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 60 X 60cm in size in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), of best approved quality and as per standard specifications etc.,complete.
Supply and fixing in position of enamel water level indicator with all accessories of approved pattern and design etc., complete as per standard specifications and as directed by Engineer-in-charge
Labour charges for painting Town Panchayat Emblem in accordance with the size and specifications as approved by the Board on the Service Reservoirs including cost of all consumables etc., complete and as directed by Department Officers.
Providing Cut stone set in CM 1:3 (one cement and three sand) using well dressed cut stone supporting inlet pipe of size 0.30 x 0.30 x 0.15m for service reservoir etc., complete as per standard specifications and as directed by Engineer-in-charge
Supplying and fixing in position of RCC M30 inside access ladder of following size using 20mm size HBS jelly including cost of all materials, centring, shuttering,strutting, fabrication and placing in position of reinforcement, finishing, curing etc. complete and as directed by Department Officers.
Construction of RCC spiral staircase in RCC M30 using 20 mm HBGS of required height for approach to the roof of Service Reservoir with RCC Handrails including earthwork excavation, providing CC 1:4:8 mix, RCC footing M30 mix, GL platform etc., and also including cost of steel reinforcement, fabrication charges, scaffolding, centering, precasting charges, cement, painting etc. complete as per standard specifications and as directed by Engineer. The staircase shall be braced to the column of service reservoir at suitable interval.
Providing and fixing of M30 Grade Concrete for ventilators of approved pattern including cost of cement, reinforcement, centering, shuttering, strutting etc., complete 0.30m dia
Supplying and fixing of M30 Grade Concrete using 20 mm HBGS for RCC Handrails of 0.91 m height over the top of roof slab of approved pattern and design including the cost of reinforcement, centering, precasting, finishing etc complete
Providing pipe connection by lifting pipes and specials in vertical direction and placing the same for required alignment including lifting the pipes and specials in various heights of inlet, outlet, overflow and scour including earthwork excavation conveying the pipe and specials into the trenches, laying to proper grade and alignment cutting, threading and jointing with jointing materials with required specification including labour charges and supply of valves pipes, specials MS Clamps to fix the pipes with the columns including all taxes duties and connected charges etc. complete and taxes duties and connected charges etc. complete and as directed by Engineer in charge. a) Lifting and positioning of C.I Pipes in vertical direction for service reservoir pipe connection i) Vertical laying up to 2m ht. from G.L.
ii) Vertical laying from 2m to 4m.
iii) Vertical laying from 4m to 6m.
iv) Vertical laying from 6m to 8m.
v) Vertical laying from 8m to 10m.
vi)Vertical laying from 10m to 12m.
vii) Vertical laying from 12m to 14m.
viii) Vertical laying from 14m to 16m.
ix)Vertical laying from 16m to 18m.
x) Vertical laying from 18m to 20m.
b) Supply, delivery to site, fixing, & commissioning of CI Pipe for plumbing
c) Supply, delivery to site, fixing, & commissioning of CI Sluice valve i) 100mm Dia. D/F CI Sluice Valve
ii) 150mm Dia. D/F CI Sluice Valve
iii) 200mm Dia. D/F CI Sluice Valve
d) Supply, delivery to site, fixing, & commissioning of CI Specials i) 100mm Dia. D/F CI Specials
ii) 150mm Dia. D/F CI Specials
iii) 200mm Dia. D/F CI Specials
e) Jointing the C.I Double flanged pipes and specials with rubber insertion to with IS- 638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete. i) 200 mm dia C.I Double flanged pipes and specials
150 mm dia C.I Double flanged pipes and specials
100 mm dia C.I Double flanged pipes and specials
Refilling with excavated soil (other than sand) complying with the standard specification for filling in foundation and basement
Supply and fixing of GI cowls for 1.00LL Sump
Supplying and fixing MS ladder out side the 1.00LL sump
Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. At Sump - 1250 lpm x 40 m
At Infiltration Well - 500 lpm x 75 m
AC three Phase / 415 V/ Horizontal SPDP 4 Pole Squirrel cage Induction motor for HSC centrifugal pumps -1500RPM Supply and delivery of AC three Phase 4 pole Horizontal squirrel cage Induction motor confiriming to IS 325/1996 and as amended thereafter with Class F insulation to suit the speed of pump and suitable for operation with continous S1 rated, 415V +/- 10 %, 50 HZ +/- 5% supply , TEFC (upto 20 HP), SPDP (above 20 HP). The motor offered should be of energy efficient motors. (SOR 22-23, P.No. 112, Item No. 1) At Sump & Infiltration Well - 12.5HP Motor
Supply and delivery of Fully Automatic Auto Transformer Starter suitable for the motor offered. Floor mounting type air/ oil cooled Auto Transformer Starter with tapings at 50%, 65%, 80%, housed in robust steel chamber with arc and main contacts confirming to IS 8544 Part IV for operation in AC three Phase 50 Hz (+/- 5%), 415V (+/- 10%) with the following components etc. under voltage release with no volt coil, over load relay with dash pot arrangements, single phasing preventor, LED ON/ OFF switches, Mounted Ammeter, Earth leakage relay, contactor assembly suitable for next standard KW rating, in coming and out going cable entry provisions, transformer tank including first filling of oil etc. At Sump & Infiltration Well - 12.5HP Motor
Supply and delivery of DI electric Capacitor KVAR with TNEB test certificate with acceessories confirm to IS 2834 and rate is inclusive of banking charges such as providing of copper bus bars with provision of adding at least 2 capacitors at later date, cable entry box , fabricating chargese. The rates are basic rates with inclusive of handling charges 9 KVAR for 12.50 HP motor - At Sump & 9 KVAR for 12.50 HP motor - At Infiltration Well
PANEL BOARD Supply and delivery of floor mounting cubical type vermin and dust proof powder coated M.V. panel board made of 14 SWG MS sheet & MS angle iron frame work with enclosed 4 Nos of Aluminium bus bar of Electrolyte grade E.91,PVC sleeved of suitable size for phase and netural with hinged front door and railway type lock and key arrangements.The bus bar shall be of ample current carrying capacity with all interal wiring as per IE rules and as per IS 8633 and as per safty requirements of CEIG. The desgin of panel board should facilitate for quick operation of all switches from the front side. The panel board should be completed with all interal wiring including necessary twin copper earthing arrangements and consists of the componets for controlling incoming and out going supply ; rate inclusive of fabrication charges INCOMING i)250 Amps, 3 phase 4pole MCCB with over /under voltage release and short circut release to control the incoming supply to the bus bar in the cubical board from the E.B.supply point. - (1 No Spare) ii)Multi Functions Meters - Flush type for M V Panel Board - LED type, CT/PT, Voltage, Current, Frequency, Kilowatt, Kilo Volt Ampere, KVAR , KVAH, Run Hours, unbalance(V,A), Rpm, Phase angles, Thd - Class 0.5 With RS 485 Port Outgoing i)200 Amp 3phase MCCB ,TPN for controlling ATS starter for HSC pumpset (1 no stand by) iI) 50 Amp 3 phase3P MCCB to control the capacitor for HSC pumpset ( 1 NO spare) iii) 32 Amp 3Phase MCCB for controlling the lighting load of the pumproom iv) RYB & ON/OFF indicating lamps with control switch
Supply and delivery of wall mounted cubical type EB meter Box of required size with 3 compartments made of 14 SWG MS sheet, Aerial Board, fuse carrier-6Nos, CT for energy meter with copper bus bars,necessary clamps and other allied works to avail the EB power supply for pump room.......1set.
150mm dia Pressure Gauge and Vaccum guage including all accessories as per specification (For Suction and Delivery to be mounted on wall on Teak Wood Board)
a)supply and delivery of heavy duty 1.1 KV grade 3.5 x 95sq.mm-armoured aluminium conductor XLPE insulated pvc sheathed cable as per IS 7098 (Part I) to be laid in between EB pole - Meter Box - M.V. panel
b) Laying the above cable as per IE rules inside the pumproom or in air
c)Jointing of the above L.T. cables 3.5 core 1.1 KV grade Armoured Aluminium conductor cable confirming to IS1554 Part I with ISI marking including jointing materials lugs,clamps,etc.,
a)Supply and delivery of heavy duty 11 KV grade 3.5 x50sq.mm-armoured aluminium conductor XLPE insulated pvc sheathed cable as per IS 7098 (Part I) to be laid in between M.V. panel to ATS starter for 50 HP HSC SOR 2022-23Pg.No:123
b) Laying the above cable as per IE rules inside the pumproom SOR 2022-23Pg.No127
c)Jointing of the above L.T. cables 3.5 core 1.1 KV grade Armoured Aluminium conductor cable confirming to IS1554 Part I with ISI marking including jointing materials lugs,clamps,etc., SOR 2022-23 Pg.No:125
a)Supply and delivery of heavy duty 1.1 KV grade 3 x 50sq.mm-armoured aluminium conductor XLPE insulated pvc sheathed cable as per IS 7098 (Part I) to be laid in from ATS starter to motor for 50 HP HSC pumpset SOR 2022-23Pg.No:123
b) Laying the above cable as per IE rules inside the pumproom SOR 2022-23Pg.No127
c)Jointing of the above L.T. cables 3 core 1.1 KV grade Armoured Aluminium conductor cable confirming to IS1554 Part I with ISI marking including jointing materials lugs,clamps,etc., SOR 2022-23 Pg.No:125
a)Supply and delivery of heavy duty 11 KV grade 3 x 16 sq.mm-armoured aluminium conductor XLPE insulated pvc sheathed cable as per IS 7098 (Part I) to be laid in from M.V. panel to 18 KVAR capacitor
b) Laying the above cable as per IE rules inside the pumproom
c)Jointing of the above L.T. cables 3core 1.1 KV grade Armoured Aluminium conductor cable confirming to IS1554 Part I with ISI marking including jointing materials lugs,clamps,etc., S
Supply, Delivery and Fixing of the following items for obtaining Service Connection from E.B.Pole. 150 mm GI SERVICE PIPE to a length of 3m
150mm GI bend
150mm GI Coupling
Providing pump house wiring and lighting arrangements. Providing pump house lighting wiring using PVC conduit pipes and specials with 2 runs 1.5 sq mm PVC insulated copper wire and 1 run 14 SWG TC wire for earthing for lights, 5 Amps plug points including switch box 5 Amps switch socket, celing rose and consumable suitable for pump house wiring
Supply and fixing LED INDOOR FITTINGS (LIGHT EMITTING DIODE) 24W LED 4000K 2 x 2 Square Type Recessed Fitting (vide page 185 of SR Book 2019-20 )
Supply and fixing LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) 30W LED Street Light Fitting
16 amps.3 pin flush type wall socket only.- 3No
Supply and delivery of safety appliances as detailed below Electrical gloves tested to 11 KV /22 KV with wooden box dusted with french chalk powder -2Nos Electrical quality 6mm thick rubber mat - 6 Nos 5 kg capacity ISI marked Dry chemical powder fire extinguisher - 2 Nno Fire Bucket-3 Nos Hooked to MS stand -1 No Laminated shock treatment chart - 2 NO Laminated shock treatment chart - 2 NO Wooden First Aid Box -1 no
Providing the following tools mounted on Teak wood Board to be fixed on the wall and in a teak wood box Connector Screw Driver 901 Taparia Make or equivalent - 1No 200mm Screw Driver 825 Taparia Make or equivalent -1No 200mm Cutting Plier Taparia Make or equivalent -1No 800gm Ball Pane Hammer with Handle Taparia Make -1No DE Spanner set 6 to 32 Jhalani Make or equivalent
Twin GI Earthing as per IS 3043/1987 and I.E. rules including Earth pit (2 pits) with RCC slab and other civil works complete (upto 25 HP)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply and delivery of CI D/F sluice valve with cap wheel as pe IS 14846/2000 PN 1.0 with ISI marking . The rates are inclusive of transportation charges, etc., 300 mm sluice valve - for 300mm main
CI D/F (outdoor use) Single Door/ Multi Door Non return valve conforming to IS 5312/2003(part I & II) to be fixed after Water meter/ Flow recorder on pumping main near Pump house with dash pot arrangement for 90% fast closing & 10% slow closing. 300mm Non return valve - for 300mm main
Supply and delivery of following CI pipe and spls. IS 1538/1993 , IS 7181/1986 & IS 1537/1996 (SOR -P- 38) Delivery pipe upto 200mm
upto 300mm
Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to the required specification with M.S. bolts and nuts complete (including cost of jointing materials) 100mm
Supply and delivery of Woltman model with removal mechanism water meters of following sizes with Dirt box confirming to IS 2373 with life cycle test certificate from FCRI/NABl Accredited lab.The water meters shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position.The meters shall be hydro dynamiacally ,hydrostatically balanced. The runner,runner chamber, pointers of the meter shall be as per ISO 4064 Class B specification.Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates.(TWAD SoR 2022-23 pg:86) At Infiltration Well 300mm water meter with dirt box
Erection of water meter including earth work excavation ,labour charges from cutting and threading, convenyance,welding and hire charges for tools and plants etc complete and as directed 300mm water meter with dirt box
Supply and run of 4 x 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD68)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
Download all tender documents and submit your bid