8543/GWL/E8 WELCOME MAINTENANCE OF MD ACCN AND VIP VISITS INCLUDING E/M WORKS IN THE AREA OF AGE B/R-II UNDER GE GWALIOR

Amount

Preparation of old decorated surface by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots on old plastered or unplastered surfaces of wall including cornices, pilasters etc and material and labour for applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

Preparation of old decorated surface by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots on old plastered or unplastered surfaces of ceiling including cornices, pilasters etc and material and labour for applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

Preparation of old decorated surface by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots on old plastered or unplastered surfaces of wall including cornices, pilasters etc and material and labour for applying two coat of white wash complete all as specified and directed by Engineer-in-Charge.

Preparation of old decorated surface by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots on old plastered or unplastered surfaces of ceiling including cornices, pilasters etc and material and labour for applying two coat of white wash complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying one coat of oil bound distemper on walls including preparation of old plastered or un plastered surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying two coat of oil bound distemper white or tinted on walls including preparation of old plastered or un plastered surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying one coat of synthetic enamel paint including Preparation of old painted wooden surface any description not otherwise described over 10 cm width or girth complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying two coat of synthetic enamel paint over one coat of primer Preparation of new wooden surface any description not otherwise described over 10 cm width or girth complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying one coat of synthetic enamel paint over one coat of primer Preparation of old Steel surface over 10 cm width or girth complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying two coat of synthetic enamel paint as one coat including Preparation of new Steel surface over 10 cm width or girth complete all as specified and directed by Engineer-in-Charge.

Material and labour for complete removal of exiting treatment from external wall preparation of old plastered surface and applying two coat of premium acrylic exterior anti algal fungal emulsion paint over one coat of weather coat exterier primer on wall complete all as specified and directed by Engineer-in-Charge. Make: Asian Apex Ultima/ Berger weather coat All Guard or equivelent in other make

Supply and fixing 3mm thick, figured glass pin head type and glazing with oil putty,silicone or wooden beads, in square not exceeding 0.5 sqm in each pane, including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair galvanised wire cloth, .63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised staples complete all as specified and directed by Engineer-in-Charge.

Supply and fixing galvanised wire cloth, .63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised staples complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 10L capacity PVC valve-less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of wall surface and aplying wall putty minimum 1mm thick on wall surface finished even and smooth including rubbing complete all as specified and directed by Engineer-in-Charge.

Material and labour for Vitreous China, wash down water closet pan (Pedestal pattern) white colour shade with Supply and fixing seat cover including connection to drain and to flush pipe and anti syphonic pipe including all joints etc, in repair complete all as specified and directed by Engineer-in-Charge.

Material and labour for Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position, with and including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, in repair complete all as specified and directed by Engineer-in-Charge.

Material and labour for Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position, with and including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete, in repair all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair shower rose brass chromium plated without swivel joints, 125 mm in size including fixing to steel pipe complete all as specified and directed by Engineer-in-Charge.

Material and labour for cutting holes in brick/stone wall ,depth of embedment portion of hold fast exc half brick wall but not exc one brick wall, built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and directed by Engineer-in-Charge.

Material and labour for vitreous china wash basin, size 550mmx400mm white or coloured flat back fixed on existing brackets including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe, pvc connection and union including 32mm dia PVC waste, in repair complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 25mm dia stainless steel curtain rod not less than 0.80mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) complete all as specified and directed by Engineer-in-Charge.

Material and labour for non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Material and labour for vitrified ceramic tiles ( Square/ ractangular) polished area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile, over and including screed bed 20 mm thick in CM (1:4) complete all as specified and directed by Engineer-in-Charge.

Material and labour for vitrified ceramic tiles ( Square/ ractangular) polished area of each tile not exceeding 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile, over and including backing coat 10 mm thick in CM (1:4) complete all as specified and directed by Engineer-in-Charge.

Material and labour for non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Material and labour for ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick backing coat in CM (1:4 ) set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed by Engineer-in-Charge.

Material and labour for Coloured Glazed Ceramic coloured tiles of any shade type and pattern size 300 x 450 and 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc, over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Material and labour for 16mm to 20mm thick Granite tile (of any type) machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the granite stone including cutting and polishing types as in floor set over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete with fittings, including taking out old steel tubing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete with fittings, including taking out old steel tubing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/ PVC pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/ PVC pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Taking down existing chowkats or frames of any description and in any position not exceeding 1.50 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down existing chowkats or frames of any description and in any position exceeding 1.50 sqm but not exceeding 4 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description exceeding 1.00 sqm but not exceeding 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Material and labour for 2nd class hardwood palin, solid, straight chowkhat and frames wrought frame rebated on solid rounded and chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

Supply and fixing band, straps,supports or stay for rainwater,ventilating pipes, including bolts if required hookes (stay) heavy for large gates hook and pintle hinges large hasps and staples, chains hand made sliding bolts clamps hold fasts wall ties hooks for hanging fans plain angle cleats for securing purlin to wood trusses or rafters knee piece inserts two way and three way straps plate wahers and similar small articles confirming to Fe 290 Gde 165 complete all as specified and directed by Engineer-in-Charge.

Material and labour for 35mm thick 2nd class Hard Wood, plain framed panelled shutters ( any number of panel) with panels of timber flat on both side ( feather edge ) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed by Engineer-in-Charge.

Material and labour for 35 mm thick glazed and skeleton shutters of 2nd class Hard Wood, open rebated and prepare to reveive glass, guage etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed by Engineer-in-Charge.

Material and labour for 35 mm thick glazed and skeleton windows, ventilators of 2nd class Hard Wood, open rebated and prepare to reveive glass, guage etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for securing glass etc, window & ventilators are provided with stile and rails as specified in SSR Part I, Section 8, clause 8.24 (b) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rai ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in MS frame welded/sealed to the style and rails with suitable PVC sheet beading and joined together with solvent complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100 mm long size stainless steel hinges medium weight complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing aluminum handles cast type, anodized of 150 mm size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing butt hinges 100mm long medium weight, cold rolled mild steel complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed by Engineer-in-Charge.

Demolition of concrete of any description and in position not otherwise specially provided for, complete all as specified and directed by Engineer-in-Charge.

Material and labour for Plain cement concrete (1:5:10) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified and directed by Engineer-in-Charge.

Material and labour for water proofing treatment slab including wall with two coat of tapcrete of make cico/pidirete of pidilite all as per manufacture instruction complete all as specified and directed by Engineer-in-Charge.

Material and labour for 110 mm bore PVC (SWR) pipes single socketed in any length with carefully prepare rubber ring joints (or solvent joints) fixed on walls/ ceiling or laid in floors, including taking up/down existing pipe complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75 mm bore PVC (SWR) pipes single socketed in any length with carefully prepare rubber ring joints (or solvent joints) fixed on walls/ ceiling or laid in floors, including taking up/down existing pipe complete all as specified and directed by Engineer-in-Charge.

Material and labour for PVC (SWR) floor trap 75 mm bore, plain with steel grating including jointing with solvent cement of outlet and fixing in PCC type B-1 1:2:4, in repair complete all as specified and directed by Engineer-in-Charge.

Material and labour for PVC (SWR) bends, 110 mm bore, any radius, in repair complete all as specified and directed by Engineer-in-Charge.

Material and labour for PVC (SWR) bends, 75 mm bore, any radius, in repair complete all as specified and directed by Engineer-in-Charge.

Material and labour for PVC (SWR) bends, 110 mm bore, any radius with access door, in repair complete all as specified and directed by Engineer-in-Charge.

Material and labour for PVC (SWR) branch piece, double (double Y) equal or unequal with access door, 110 mm bore, in repair complete all as specified and directed by Engineer-in-Charge.

Material and labour for PVC (SWR) Junction, single, (single T) equal or unequal with access door, 110 mm bore, in repair complete all as specified and directed by Engineer-in-Charge.

Material and labour for PVC (SWR) vent cowl, 110 mm bore, in repair complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair grating square 150mm size of PTMT (minimum weight 100) complete all as specified and directed by Engineer-in-Charge.

Material and labour for 10 mm thick rendering in CM (1:4) on brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement, including taking down existing plaster etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 10 mm thick rendering in CM (1:6) on brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement, including taking down existing plaster etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket and guard and railing 60cm long complete all as specified and directed by Engineer-in-Charge.

Material and labour for Cutting chases, pinning in stone/brick wall making good to facing where required and pointing in vement mortar 1:3 to end or edges or landing, step, cills,sunshades,sleves, Lintel etc and cutting chases for concealed water tubing or concealed conduit etc and making good cutting not exc 10cm in girth complete all as specified and directed by Engineer-in-Charge.

Material and labour for Dubbing coat with cement plaster 1:4 in cement mortar average 15mm thick on irregular face of wall/ concrete complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Flushing jet Spray (chromium plated) for padestral pattern EWC including 1.00 metre tube flexible pipe and brass chromium plated nuts etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Health faucet with 1.00 metre tube ( Branded tube ) including flexible pipe and brass chromium plated nuts etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm Bore Brass Bib tap fancy type with long body with wall flange etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm Bore Chromium plated angle cock with wall flange etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 2 Way Chromium plated angle cock with flange etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 2 Way Double handle Bib cock with flange etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm Bore CP Central hole basin mixer w/o pop waste system etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm Bore CP Wall mixer 3 in 1 ( provision of OH shower and hand shower) etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Toilet Paper Holder of brass CP fixed to wall with (CP) screw etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm size PVC Connection with PTMT nuts of lenth 450mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair sinks with drainage board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair CP Brass tubular towel rail 20mm dia D type 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Single Lever Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges complete all as specified and directed by Engineer-in-Charge. Make:- Jaquar cat No LYR-38165 or equivalent as approved by GE.

Supply and fixing in repair waste pipe PVC 32mm dia fixed with sink WHB complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair End Knob 25mm dia stainless steel for curtain rod complete all as specified and directed by Engineer-in-Charge.

Material and labour for 18mm thick Celuka PVC ply as in shelf and for supported the hold of shelf/ partition and shall be provided 3 edges liping with PVC strip in size 18mmx1mm thick of density 600kg//Cum using solvent cement etc as in repair for cupboard etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair plate rack made out of 1 mm thick stainless steel of size 90 Cm X 75 Cm X 25 Cm with all internal fittings and compartments/ partitions complete all as specified and directed by Engineer-in-Charge. Make:- Prayag cat No B-347 or equivalent as approved by GE.

Supply and fixing in repair 25mm bore ball float valve high presurre of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum Weight 210 gram) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair corner glass shelf 300mm ( with ABS Bracket ) complete all as specified and directed by Engineer-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc as per existing specification complete all as specified and directed by Engineer-in-charge.

Material and labour for point wiring with 1.5 sqmm (Nominal Area)PVC insulated FRLS un-sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC concealed conduit of med grade of size not less than 25mm dia with all fitings and accessories including concealed modular metal flush boxes reqd as per site reqmt for mounting modular switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified and directed by Engineer-in-charge. Note: Quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface.

One light point/Fan point controlled by one switch

One light point controlled by two way switch

One Bell/Buzzer point controlled by one way 5 Amp push button switch.

One 5 pin socket out let 5 amps on same board.

One 5 pin socket out let 5 amps on indepedant board.

Material and labour for point wiring with 2.5 sqmm (Nominal Area)PVC insulated FRLS un-sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC concealed conduit of med grade of size not less than 25mm dia with all fitings and accessories including concealed modular metal flush boxes reqd as per site reqmt for mounting modular switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly for one 5 pin socket out let 15 amps on independent board complete all as specified and directed by Engineer-in-charge. Note: Quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface.

Material and labour for point wiring with 1.5 sqmm (Nominal Area)PVC insulated FRLS un-sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC surface conduit of med grade of size not less than 25mm dia with all fitings and accessories including concealed modular metal flush boxes reqd as per site reqmt for mounting modular switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified and directed by Engineer-in-charge.

One light point/Fan point controlled by one switch

One Bell/Buzzer point controlled by one way 5 Amp push button switch.

One 5 pin socket out let 5 amps on same board.

One 5 pin socket out let 5 amps on indepedant board.

Material and labour for point wiring with 2.5 sqmm (Nominal Area)PVC insulated FRLS un-sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC surface conduit of med grade of size not less than 25mm dia with all fitings and accessories including concealed modular metal flush boxes reqd as per site reqmt for mounting modular switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly for one 5 pin socket out let 15 amps on independent board complete all as specified and directed by Engineer-in-charge.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified and directed by Engineer-in-charge.

Supply and Fixing modular white cover plate with frame of 8/12 module complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular white cover plate with frame of 06 module complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular white cover plate with frame of 03 module complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular white cover plate with frame of 2 module complete all as specified and directed by Engineer-in-charge.

Supply and fixing Modular switch 1 way 06 amp single pole complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular socket outlet 6A-3/5 pin combined of 02 module complete all as specified and directed by Engineer-in-charge.

Supply and fixing Modular switch 2 way 06 amp single pole complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular switch 16A, one way of 01 module complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular socket 16A, 6 Pin of 2 module complete all as specified and directed by Engineer-in-charge.

Supply and fixing moduar bell push 6 Amp 1 module complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular fan step regulator 120 W-2 module complete all as specified and directed by Engineer-in-charge.

Supply and fixing bell Ding Dong, AC, 230 Volts, single pole complete all as specified and directed by Engineer-in-charge.

Supply and fixing angular Lamp holder including 12 Watt LED Bulb, PVC/polycarbonate type with back plate suitable for angular fittings complete all as specified and directed by Engineer-in-charge.

Supply and fixing Ultra bright LED Tubelight fitting of LED 22 Watt incluing required length of 1.5 Sqmm PVC multistranded copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed by Engineer-in-charge.

Supply and fixing energy saving 10W mirror optics LED tube light fittings with 6000K including testing on completion complete all as specified and directed by Engineer-in-charge.

Supply and fixing security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 40mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 6 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded copper conductor for connection from ceiling rose to light fittings including testing on completion complete all as specified and directed by Engineer-in-charge.

Material and labour for sub main wiring with two single core PVC insulated unsheathed FRLS multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLS copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB, in repair complete all as specified and directed by Engineer-in-charge. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface.

Supply and fixing in repair MCB DB, sheet metal enclosure double door SPN 12 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20. Amps, 240 volts,10 KA complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair MCB SPN 40 to 63 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair MCB SP 240 volts, 6 to 40 Amps, 'B' series 10 KA including connection with suitable size copper lugs complete all as specified and directed by Engineer-in-charge.

M/s Bansal Brothers and Co.