ADDITION AND ALTERATION TO DEFENCE CIVILIAN MARRIED ACCOMMODATION P169 AT POIGAIPAKKAM AND PROVISION OF OVERHEAD FILLING FACILITY FOR DFT CFT AT STATIC WATER TANK NEAR AED ALD AND PARKING SHED FOR INAS 561 AND SPECIALIST POWER SUPPLY FOR PROCESSING M

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided including padding concrete on roof and premises complete all as specified and as directed.

Dismantling of wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises including removing of all the debris to a distance n exc 2 km out side the base at the disposal of the contractor complete all as specified and as directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in Skirting, etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including rendering 10mm thick of cement mortar 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 350 x 250mm x7mm/450 X 350 X 7mm thick as in dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10mm thick plaster on fair faces of brick work/concrete in CM 1:4 to receive tiles as in dado complete all as specified and as directed..

M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as in levelling course over sub base complete all as specified and as directed..

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed with CM 1:6 ccomplete all as specified and as directed.

M&L for applying epoxy treatment for sunken floor over rendering 15mm thick on fair faces of brick work or concrete surfaces with cement plaster 1:3 with WPC @ 2% by weight of cement (Note : Water proofing compound will be measured and paid separately) including finished even and smooth without using extra cement.

M&L for PCC 1:5:10 type, E-2 (using 40mm graded agg) as in mass concrete as in sunken floor complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or any thickness in floors, skirtings, risers etc laid ,bedded and pointed in any mortar complete all as specified and as directed.

M & L 20mm thick Granite (of any type) work (table rubbed and polished) in Skirting for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M & L for Machine cut cudappah stone slab 20-25mm thick Fixed in Shelves mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed

M & L for Reinforced cement concrete Type B1 1:2:4 (20mm graded aggregate) (nominal mix) in:Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed

S & F Mild steel bars 6mm to 8mm dia cut to length,bent to shape required, including, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkat or frame with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and as directed.

Taking down shutters of any description not exc 1 sqm and not exc 2 Sqm complete all as specified and as directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each and refixing in the same opening complete all as specified and as directed.

S&F second class hard wood plain , solid , straight , chowkats and frames wrought , framed rebated on the soilid rounded or chamfered put together with glue pinned at joints.

Supplied and fixed Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

Supplied and fixed Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

M&L 2nd class hard wood plain fillets. square, rectangular or triangular in section, clean sawn, secured with screws with nails exc13 sqcm but n exc 25 sqcm complete all as specified and as directed.

S&F for 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered perticle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated complete all as specified and as directed.

S&F 30 mm thick second class hard wood , glazed and skelton shutters open rebated and prepared to receive glass, guaze etc (with sash bar) fitted with cut and mitred breads for securing glass etc stiles and rails, size at members of shutters as specified in SSR Pt-I sec 8, clause 8.20 (b) complete all as specified and as directed.

M & L Cup boards stuttters made with 19 mm thick prelaminated particle board with decorative lamination on one side and other side balancing white lamination medium density, Interior grade, including 6 mm teak wood lipping complete all as specified and as directed.

S&F in repairs 18/19 mm thick prelaminated particle board , interior grade, prelaminated one side with decorative choice lamination and otehr side balancing wihte lamination, fixed with screws to timber frame work as in cup board shelves complete all as specified and as directed.

S & F Continuous (piano) hinges,width of flap 30mm, mild steel, bright finish or electro galvanised complete all as specified and as directed.

M&L Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and as directed.

M&L Providing PCC Type B1 1:2:4 (20mm graded aggregate) in as in hold fast fixing and filling of hoolow steel frame complete all as specified and as directed.

S&F 125 mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 100 mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolt all as above but 150mm long complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolt all as above but 125mm long complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolt all as above but 100mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated types, anodised, each 150mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated types, anodised, each 125mm long complete all as specified and as directed.

S&F for ball catches of 8mm dia steel brass body and striking plates approved pattern fixing to the cupboard shutters, including lettering complete all as specified and as directed.

S&F 300mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section complete all as specified and as directed.

S&F 200mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section complete all as specified and as directed.

S & F of Floor door stopper 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S & F in repairs of Floor door stopper 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs incl roller and roller plates complete all as specified and as directed.

S&F in repairs of 300mm mild steel ordinary rat tail rod pattern springs incl roller and roller plates complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed.

Material and labour for preparation of old wooden surfaces and applying one coats of synthetic enamel paint on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed.

S&F powder coated anodised aluminium alloy sections 3 tier track sliding windows series B weight of section frame 1.248 kg/m and shutter section weight 0.547 kg/m Jindal or equivalent duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0 mm nominal thickness,aluminium wire cloth 0.45 mm dia and average width of aperture 1.4 mm, aluminium alloy handles ,aluminium powder coated any colour deco grill 8 mm dia(75x75mm) etc including taking down old window in any size and make and make good jambs and cills complete all as specified and directed by Enginner-in-Charge Note : rate shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle, 8mm dia aluminium powder coated colour deco grill etc complete all as specified and as directed.

S&F powder coated anodised aluminium ventilator with fixed aluminium frame of size 65 x 40 x 1.98 mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4 mm thick pinhead glass and remaining portion to be louvered using 4 mm thick pinhead glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm incl necessary channel frame work, including rubber gasket and aluminium beading including taking down old ventilator in any size and make complete all as specified and directed Note : Rates shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc

S & F Aluminium XPM alloy wire cloth, average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S & F in repairs of Aluminium XPM alloy wire cloth, average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M & L brick work with modular flyash bricks straight or curved on plan exc 6 m mean radiusin half brick thick walls built in CM 1 : 6 complete all as specified and as directed.

Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L Rendering 5mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M & L Rendering for 10mm thick in cement mortar (1:6) on other than fair faces of internal bricks or concrete surfaces finished even and smooth without using extra cement all as specified and s directed..

M & L Rendering for 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair Complete all as specified and as directed..

M&L for preparation of new plastered surface of wall and applaying two coat of oil bond distemper over one coat primer and 1 mm putty by using mechanicall tool/ auto roller complete all as specified and directed

M &L applying two coat of cement based paint over a coat of primer alkali resistance on newly plastered or unplastered wall surface including preparation of surface, complete all as specified and as directed.

M & L Preparing newly plastered surfaces of celings and applying three coats of white wash complete all as specified and as directed.

M & L Preparing newly plastered surfaces of Walls and applying three coats of white wash complete all as specified and as directed.

M & L Preparing old plastered surfaces of celings and applying one coat of white wash complete all as specified and as directed.

M & L Preparing old plastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M & L for Complete Removal of existing treatment on wall by vacuumbased sanding machine removal of nails etc & filling cracks and applying two coats of oil bond distemper over one coat of alkali resistant primer and 1 mm putty by using mechanicall tool/ auto roller complete all as specified and directed

Taking up or down steel tubing 20mm dia bore and connection complete all as specified and as directed.

Taking up or down steel tubing 25mm dia bore and connection complete all as specified and as directed.

Cutting chases, pinning in , for concealed water tubing on brick or stone walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified and directed.

Supplying and laying of CPVC pipes of outer dia of pipe 20mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

Supplying and laying of CPVC pipes of outer dia of pipe 25mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

S & F of Brass Elbow (3/4 X ½) complete all as specified and as directed

S & F of 20mm Brass Tee complete all as specified and as directed

S & F of 25mm Male Brass Threaded Adaptor (MTA/ MBTA) ) complete all as specified and as directed.

S & F of 25mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and as directed.

S & F of 25mm Union complete all as specified and as directed.

S & F of 25mm dia CPVC ball valve complete all as specified and as directed.

Taking down rain water pipe and sewage pipe of any size of pattern including all fittings, heads, shoes, bends etc complete all as specified and as directed.

S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or floors complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or floors complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 110mm dia bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 110mm dia bore PVC (SWR) junction single, (Single 'T') equal or unequal with access door complete all as specified and as directed.

S&F for 75mm dia bore PVC (SWR) junction single, (Single 'T') equal or unequal with access door complete all as specified and as directed.

S&F for 110mm dia bore PVC (SWR) vent cowl complete all as specified and as directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding , low level flushing cistern and Flush pipe of 32mm dia but including seat cover) complete all as specified and as directed.

S&F in repairs PVC valve less flushing cistern low level 10 litres capacity with syphonic action type with inlet ball valves, float and handle and connections to pipes and fixing of chain and pull (or) lever including brackets and 32mm dia PVC flush pipe of 60cm long complete all as specified and as directed.

S&F in repair vitreous china, wash hand basin white flat back size 550 x 400 mm white complete waste, chain and pug and precelain stopper including bracket complete all as specified and as directed..

Supply & fixing in repairs fancy type pillar tap 15mm dia, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe complete all as specified and as directed.

Supply & fixing only 32mm waste fittings brass of chromium plated for wash basin etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and complete all as specified and as directed.

S&F in repair bib taps concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipes of 15mm bore complete all as specified and as directed..

S & F in repairs 125 mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F PVC (SWR) multiple Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair Angle valves fancy type,chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and as directed..

S&F in repairs stop cock concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore complete all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repair aluminium anodised tubular rail 20mm dia D type 60cm long between flanges including per pair brackets for each towel rail complete all as specified and as directed..

Supply and Fixing of 300mm Fiber corner shelf complete all as specified and as directed.

S & F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed

S&F Stainless Steel pipe 25mm dia curtain Rod for windows, doors Opening etc complete all as specified and as directed.

S & F Stainless steel Curtain Bracket ( L type) for fixing curtain rod complete all as specified and as directed.

S&F in repairs of PVC water tank 1000 lit capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling the same complete all as specified and as directed.

Taking down existing roof treatment including Cement plaster of any discription complete all as specified and as directed

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided including padding concrete on roof complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm mm graded stone aggregate as in Padding conrete, roof kerbs or mud stops,rounded or chamfered on edges work complete all as specified and directed.

M&L for 10 mm thick cement screed in cement mortar 1:4 with water proofing compound at the rate of 2% by weight of cement to have a smooth surface for laying of water proofing membrane and Brushing neat cement slurry with 3.00kg of cement per Sqm complete all as specified and as directed. Note : WPC will be measured and paid seperately

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minium 3mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/ sqm) laid on primed surfaces with industrial bitumen 85/25, @ 1.20 Kg/Sqm over bitumen primer @ 0.5 litre/Sq.m. by gas flame torch application and cleaning surfaces, applying evenly a tack coat/primer of industrial bitumen 85/25 grade at the rate of 1.20kg/sqm over APP membrane complete all as specified and as directed

M & L for 2 coats Aluminium paint over Water Proofing Treatment complete all as specified and directed

Supply only integral water proofing compound complete all as specified and as directed.

Removing of debries any description obtained from demolition beyond the lead included in the rates including loading unloading to a distance not exc 500m out side defence land complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures, PVC conduits and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials from wall/ceiling etc to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into existing concealed conduit through Wall/Ceiling/Floor along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly and including 2 mm thick terminal boxes MS sheet flush mounted with 3 mm thick laminated sheet white cover plate along with top plate cover as per site requirement for mounting modular switches, socket, fan regulators etc complete for the following point wiring and making good disturbed surfaces matching with existing paint complete all as specified and as directed.

All as per item ser no-117 above here in before but One light/fan point controlled by one switch with cable 1.5 Sqmm size complete all as specified and as directed.

All as per item ser no-117 above here in before but One light/fan point controlled by two-way switch with cable 1.5 Sqmm size complete all as specified and as directed.

All as per item ser no-117 above here in before but One bell/buzzer point controlled by one push button with other switches on independent board with cable 1.5 Sqmm size complete all as specified and as directed.

All as per item ser no-117 above here in before but one 3 pin socket outlet 5 Amps, same board with cables 2.5 Sqmm size complete all as specified and as directed.

All as per item ser no-117 above here in before but one 3 pin socket outlet 5 Amps, independent board with cables 2.5 Sqmm size complete all as specified and as directed.

All as per item ser no-117 above here in before but one 5 pin socket outlet 5/15 Amps, independent board with cables 4.0 Sqmm size complete all as specified and as directed.

Supply and fixing Modular switch one-way 5/6 A white Active one module complete all as specified and as directed.

Supply and fixing Modular switch two-way 5/6 A white Active one module complete all as specified and as directed.

Supply and fixing Modular switch Bell push, 5 A white Active one module complete all as specified and as directed.

Supply and fixing in repair of Modular step type fan regulator,120 W white Active two module complete all as specified and as directed.

Supply and fixing Modular socket 5 Amp, 2/3 pin Active white two module complete all as specified and as directed

Supply and fixing Modular switch one way 16 A white Active one module complete all as specified and as directed.

Supply and fixing Modular socket 16 A, 5 pin multi-purpose Active white two module complete all as specified and as directed

S&F Ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed

S&F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and as directed

M&L for Painting of ceiling fans/ exhaust fans/ Lt panel board complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and as directed

M&L for dismantling ceiling fan, remove worn out bearing, burnt winding and cleaning the slot, rewinding with super enamelled copper wire of suitable size, varnishing heating and insulating including fixing of ball bearing/bush complete all as specified and as directed.

M&L for dismantling exhaust fan 300mm sweep, remove worn out bearing, burnt winding and cleaning the slot, rewinding with super enamelled copper wire of suitable size, varnishing heating and insulating including fixing of ball bearing/bushcomplete all as specified and as directed.

Supply and fix in replacement of capacitor 2.5 mfd suitable for ceiling fan complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers of mesh type without shutters complete all as specified and as directed.

Supply and fix louver suitable exhaust fan 300mm with protection mesh and without shutter to avoid birds entering including taking down unserviceable louvers complete all as specified and directed.

Supply and fix high efficiency wall mounted LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed.

Supply and fix high efficiency wall mounted LED light fitting 2 feet white, 10W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed

Supply and high performance low wattage Street light not less than 25 Watts LED light fitting ,IP66 protection powder coated pressure die cast aluminium high power street light with heat resistant toughened glass with lens by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm GI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damaged all as specified.

Taking down the old serviceable 4 feet LED Tube light fitting of any capacity and kept it in store for safe custody and refix it in original position including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting complete all as specified and as directed

Taking down the Ceiling Fan/Wall Fan/Exhaust Fan, cleaning and greasing and refixing the same and connecting up including provision of cable from ceiling rose along with new canopy and new 1.5/2.0 feet down rod of colour matching the room painting as required in site complete all as specified and as directed.

Material and labour for Sub main wiring with Two run single core 6 sqmm for phase and neutral and one run single core 6 sqmm as earth wire with multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade confirming to IS-694 continuity conductor drawn into existing concealed conduit through Wall/Ceiling/Floor including taking down old sub main wiring and taken as credit complete all as specified and as directed. Notes: (i) The disturbed surfaces shall be made good with existing surface including finishes as applicable. (i) Two different colour wires shall be used for phase and neutral. (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles. (iv) Three run of 6.0 Sqmm cable will be measured as one unit.

Material and labour for Sub main wiring with Two run single core 4 sqmm for phase and neutral and one run single core 4 sqmm as earth wire with multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade confirming to IS-694 continuity conductor drawn into and including non-metallic rigid PVC conduit 20 mm dia concealed wiring through wall/ceiling/floor/roof etc including conduit accessories complete all as specified and as directed. Notes: (i) The disturbed surfaces shall be made good with existing surface including finishes as applicable. (ii) Two different colour wires shall be used for phase and neutral. (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles. (iv) Three run of 4.0 Sqmm cable, and one run of PVC conduit will be measured as one unit.

M&L for cutting chases on brick walls concrete surfaces not exc. 10cm girth and making good in cement mortar (1:3) the existing surface after carrying out the concealed wiring including necessary finishes complete all as specified and as directed.

M&L for Cutting holes into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 exc. 400 sqcm to n.exc 1 sqm ascomplete all as specified and as directed.

Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve complete all as specified and as directed Note: Including taking down old unserviceable.

Supply and fix for MCB SPN 230 V, 32 Amps with breaking capacity 10KA C curve complete all as specified and as directed Note: Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & Fixed Magnetic setting type 100 Amps with breaking capacity 26 KA complete all as specified and as directed Note: Including taking down old unserviceable.

S&F DB for MCB SPN 12-way double door DB with 200 amps rated copper bus bar in SS enclosure double door type having IP 43 and IK 09 protection Including taking down old u/s DB and MCB's all as specified and directed. Note: MCB SPN/SP shall be measured and paid under the respective item of the schedule complete all as specified and as directed.

S&F sheet metal enclosure VTPN 4-way MCCB DB double door with spreader terminals, insulating phase barrier and hardware, having IP 43 and IK 09 protection with necessary arrangements Including taking down old u/s DB, MCCB and MCB's complete all as specified and as directed. Note :- (i) Including taking down old u/s DB and MCCB.

Supply Fabricate, install, connect and test indoor type distribution board of 2mm thick CRCA sheet powder coated painting fabrication and concealed in wall with all incoming, outgoing cable connections provisions neutral and earth links for distribution with suitable insulation materials for fixing, suitable wiring from existing DB covered and as well as comprising following switch gear items mounted on suitable fibre sheet for protecting and fixing DB VTPN 4 way with locking arrangement complete including taking down old metal box and taken in to credit complete all as specified and as directed.

Material and labour for Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level , with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected with and incl. GI strip earth 25 x 4 mm size including alternate 5 layers of charcoal, salt crystal and including 20 mm dia GI pipe light grade by means of nuts, bolts, washers and necessary earth work upto 7.5 mtr and connecting to test point, LT Switchgear etc as per site requirement including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in electrical plate No 3 of SSR Pt- I including testing on completion complete all as specified and as directed. Notes:-The rates quoted is inclusive of galvanised earth lead strip 25x4mm conductor upto a length of 7.5m from the earth pit, necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil, site clearance etc.,

Supply and fixing Modular TV Socket white Active one modulecomplete all as specified and as directed.

Surface dressing n exc 15 cm deep complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

Material and labour for plain cement concrete type D-2, 1:4:8 (Using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed

Material and labour for old size brick work with sub class 'B' bricks straight or curved on plan exc 6m mean redius built in CM 1:4 complete all as specified and as directed

Material and labour for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface including finished even and fair without using extra cement complete all as specified and as directed

Material and labour for hardcore of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and

M & L for Cement concrete 1:4:8 in type D2 40 mm graded aggregate in base subbase with thickness 100 mm, etc acomplete all as specified and as directed.

M & L for Cement concrete 1:2:4 in type B0 12.5 mm graded aggregate in floor with thickness 40 mm, etc complete all as specified and as directed.

M&L sand filling 50mm thick under paver blocks for cushion complete all as specified and as directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement pigment,complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M & L for Plain cement concrete in foundation of type B2 1:2:4 with 40 mm graded aggregate complete all as specified and as directed.

M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc in Fe-410 W Gd E-250 complete all as specified and as directed.

Supply and fix prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/ridge/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment in Fe-410 W Gd E-250 ccomplete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material and labour for two coats of synthetic enamel painting over a coat of red oxide priming including preperation of new steel surfaces over 10cm width or girth not otherwise described complete all as specified and as directed.

Material and labour for Mild steel Eave gutters of thickness of 1 mm and diameter of 150 mm complete all as specified and as directed.

Material and labour for point wiring of one light/ceiling fan/exhaust fan point controlled by one switch with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into PVC conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire for shed complete all as specified and as directed.

S&F modular white cover plate with frame, 6 module complete all as specified and as directed.

S&F modular metal box 6 module complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 18W 4 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

M&L for sheet metal encloser double door for DB when MCB to be fixed SPN 4 way with 200 amp busbar complete all as specified and as directed.

Supply and fix for MCB SPN 230 V, 25-63 Amps with breaking capacity 10KA C curve complete all as specified and as directed

Returning, filling in trenches (Soft/Loose soil) in layers not exceeding 25 cm thick after laying of pipe including spreading, levelling & well ramming including watering as required complete all as specified and as directed.

Removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above from the starting point complete all as specified and as directed.

Supply and lay standard size common burnt clay building bricks sub class 'B' for cable protection, laid dry complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 100 mm dia. With necessary MS Clamps (40 x 6 mm) with rubber padding, bolts, washers, including painting complete all as specified and directed.

Supply and lay pipe galvanized, “Light class”, including fittings 50 mm dia. With necessary MS Clamps with rubber padding, bolts, washers, including painting complete all as specified and directed.

Supply and fix Valves, Non return , flanged of class 1.6 PN ,100 mm dia. Complete all as specified and directed

Supply and fix Valves, Sluice, flanged of class 1.6 PN ,100 mm dia. Complete all as specified and directed

Supply and lay / lowering PVC insulated stranded copper conductor cable flat type water proof 3 core 6 sqmm, 1100 voltage grade suitable for submersible pumpset with necessary connecting accessories complete all as specified and

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core complete all as specified and as directed.

Supply and lay galvanised steel water tubing light grade of size 40 mm with ISI mark including all necessary fitting laid in excavated trenches, walls, floors etc., with all fittings such as tees, bend, elbows, sockets, reducer, nipples and union complete all as specified and as directed

Supply and fix on pole/buried in ground Earth continuity conductor GI strip 32mm x 6mm fixed to wall on batten or buried in ground or drawn in conduit/pipe or fixed to poles complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 (Using 20mm graded stone aggregate) as foundation for GI pipe base complete all as specified and as directed.

Material and labour for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortat of 1:6 along with whitewashing on pcc surface with two coat complete all as specified and directed

S&F illuminated sign boards of size 1800 x 1200mm (6 feet x 4 feet ) of frame made of 50x50mm x 2mm thick stailess steel square tubes and flex in acrylic sheet both sides including writing letters as per user requirement and 50x50mm x 2mm thick stailess steel square tube posts on both sides of height 3000mm above ground level & 600mm below ground level and fixing in ground including necessary excavation upto 600mm depth and PCC complete all as specified and as directed

S&F reflective sign boards of size 600 x 300mm (2 feet x 1 feet ) flex in acrylic sheet including writing letters as per user requirement and fixing to wall complete all as specified and as directed

All as per item No 199 above but size 600 x 450mm. (2 feet x 1.50 feet ) complete all as specified and as directed.

All as per item No 199 above but size 600 x 600mm. (2 feet x 2 feet ) complete all as specified and as directed.

All as per item No 199 above but size 450 x 300mm. (1.50 feet x 1 feet ) complete all as specified and as directed.

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 32A, 415V, 4P+earth complete all as specified and as directed

S&F Static converter/ Freequency converter of power rating 5 KVA having input rating 230 V single Phase or 415 V Three Phase 50 Hz power supply and output rating 115 V Three Phase 400 Hz complete all as specified and as directed

Material and labour for Sub main wiring with 4 single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and 1 single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including stove enamelled steel conduit medium grade of suitable dia fixed on wall / roof / ceiling etc complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface complete all as specified and as directed.

Material and labour for Sub main wiring with 4 single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 16 sqmm and 2 single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 16 sqmm as in continuous earth wire drawn into and including stove enamelled steel conduit medium grade of suitable dia fixed on wall / roof / ceiling etc complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface complete all as specified and as directed.

Supply and fix Flame proof distribution board TPN 04 way with 01 No. 63 A TPN MCB as incoming and 03 Nos 32 A ,SP MCBs as out going complete all as specified and as directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 50 mm dia. With necessary MS Clamps with rubber padding, bolts, washers, including painting complete all as specified and directed.

Preparing and cleaning of broken edges of concrete pavement joints of any type and shape free from loose particles, grease, oil, demolding agents etc., cutting and chiseling the existing damaged portion of edges of joints to provide a regular prismatic cavity as directed and cleaning by using blower etc and washed with acid solutions if required and applying primer coat of epoxy ( 100 parts of epoxy resin with 50 parts of epoxy hardner by weight proportion) and filling the cut portion with epoxy mortar of Make: Huntsman (with 100 parts of epoxy resin, araldite with 50 parts of epoxy hardner, Aradur mixed with 800 parts of quartz sand by weight) including provision of temporary wooden strips or metal strips as formwork to edges of expansion/contraction/dummy joints and trowelling the mixture to level with the adjoining surface all as per manufacturers instructions complete all as specified and as directed.

M & L for Cutting holes (upto 15cm) into or through cement concrete slabs, chajjas, etc. reinforced or otherwise exc 500 sqcm but n exc 0.1 sqm as in Dispersal PQC slab using concrete cutting machine including cutting of steel anchor bars finished neatly in rectangular shape without causing damage/ cracks to the parent slab complete all as specified and directed .

Cutting the existing road for 0.3m width, 0.6m depth for laying GI pipe including excavation in any type of soil, returning filling, removing and including material and labour PCC 1:4:8 type D2 (40mm graded aggregate) of 15cm thick for making good the disturbed road portion complete all as specified and directed.

Please Enable Macros to View BoQ information