REPAIR TO SHEET, TILING, FLORING, PLUMBING AND CONNECTED B/R AND E/M WKS IN PUF SHELTER OF AGE BR-II AND AGE EM AREA UNDER GE PANAGARH

Amount

Surface excavation n.exc 30 cm deep and and avg 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas n.exc 1.5m deep and getting out hard/dense soil complete all as specified and directed.

Excavation over areas exc 1.5m deep but n.exc 3m deep and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches, n. exc. 1.5 m wide and n. exc 1.5 m in depth ,for foundation, laying of pipes, cables etc. or for shafts , wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n. exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches, n. exc. 1.5 m wide and n. exc 1.5 m in depth ,for foundation, laying of pipes, cables etc. or for shafts , wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n. exc. 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

All as per srl item No 3.00 here in before but depth exc 1.50m but n exc 3 m

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

Removing excavated surplus material (Soils) n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for hard core of broken stone gauge not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface of broken stone complete all as specified and directed.

M & L for hardcore of broken bricks of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L moorrum filling/red bajri filling in foundation laid in layers n. exc. 15cm thick, spread levelled and rammed including watering complete all as specified and directed.

M&L plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.

M&L for providing plain cement concrete type C2 (1:3:6) (using 40mm graded stone aggregate) as in foundation filling & mas concrete complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) as in rafts, footing, foundation, beams, plinth beams bases for columns etc, basement slabs and mass concrete complete all as specified and directed.

Supply only integral water proofing compound.

M&L for fly ash brick straight or curved on plan exc 6 mtr mean redius built in CM 1:6 complete all as specified and directed.

M&L for brick work of fly ash brick half brick thick in CM 1:4 complete all as specified and directed.

M&L cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Use & waste of formwork to sides of concrete foundations, footings bases of columns rafts & raft beams plinth beam and similar work rough finished surfaces of concrete flat complete all as specified and directed.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; exc. 200m thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing, complete all as specified.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S&F 35mm thick 2nd class hardwood factory made plain framed panelled shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces . The size of rail and stile as per IS: 1003 ( Part -I), kiln seasoned and chemically pressure treated, complete fixed to chowkats all as specified.

M&L Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified.

Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame.

S&F aluminum anodised barrel tower bolts of extruded section 200 mm long complete all as specified and directed.

S&F Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 250 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.

S&F butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.

S&F aluminium handles cast type anodised 150 mm long complete all as specified and directed.

M & L framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

S & F mild steel flat iron as in hold fast, clamps articles conforming to FE 290 Gde-E-165 complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S & F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

S & F steel work in tubular trusses for post/columns including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S&F steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F 0.50 mm thick pre- painted galvalume aluminium zinc coating GI based corrugeted steel sheet of any colour as approved of 550 Mpa tensile strength as in roof covering / cladding to wall fixed with self tapping screws complete specified and directed.

M&L for providing 75 mm thick Cement Concrete type C-2 1:3:6(Using 40mm graded stone aggregates) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M & L for providing 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M & L for providing 100 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring/hardstanding/paving etc including finishing the cement concrete surface even and smooth with using extra cement complete all as directed.

S & F glass dividing strips, 3mm thick and 38mm wide and inserted in position to confirm to design complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x600x7mm thick quality not less than group II, straight edge, as on skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc, set and jointed with neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 15mm thick screed in cement mortar (1:6) complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises for minor repairs to floor in patches all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 (Internally) on brick or concrete surfaces including finished the surfaces even and smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 (Externally) mixed with water proofing compound @ 3% by weight of cement on brick or concrete surfaces including finished surfaces even and smooth without using extra cement complete all as specified and directed. (Note: Water proofing compound shall be measured and paid seperately)

M&L for rendering 10mm thick in cement mortar (1:3) on concrete surfaces (ceiling) finished even and smooth without using extra cement, complete all as specified & directed.

M&L for rendering 10mm thick in cement mortar (1:4) over roof slab mixed with water proofing compound @3% by weight of cement to manintain proper slope complete all as specified and directed. Note: WPC shall be measured and paid seperately.

M&L for preparation of old wall surfaces & applying two coats of white washing complete all as specified and directed.

Material and labour for preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls & applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new wall surfaces & applying three coats of white washing complete all as specified.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F 3 mm thick sheet glass frosted type ordinary quality and glazing with oil putty in squares not exc 0.50 sqm in each pane complete all as specified and directed.

M&L for preparation of new wood or wood based surfaces of any description not other wise described over 10 cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking up or down steel tubing 15 mm bore fittings including and removal from site complete all as specified.

M&L for 15mm bore tubes “medium grade”, galavanised, with and including all fittings and fixed complete concealed in walls/ceilings or laid in floors, complete all as specified and directed.

M&L for 20mm bore tubes “medium grade”, galavanised, with and including all fittings and fixed complete concealed in walls and ceilings or laid in floors, complete all as specified and directed.

S&F Bib taps, cast copper alloy with handle, chromium plated fancy type, with wall flange screwed down, suitable for 15 mm bore of pipe complete all as specified and directed.

Material and labour for CI floor trap 100mm dia with CI grating including jointing to waste pipe in run lead complete and making good the disturbed surface to match the existing surface, fixed complete all as specified and directed.

Demolition PVC rain water pipe 110mm dia including fittings & removing from site completed all as specified & directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with ruber ring joints laid in trences or in floors complete all as specified and directed.

S & F 110mm bore PVC(SWR) bends any radius complete all as specified and directed.

S & F 75mm dia PVC rain water pipe fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.

S&F PVC bends plain (any radius) for 75 mm bore complete all as specified and directed.

S&F PVC connection pipe 15mm size & 450mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete complete all as specified and directed.

S & F vitreous china wash basin white,flat back of size 550x 400mm including fixing arrangements complete all as specified and directed.

S & F Stop valve chromium plated any description, suitable for 15mm bore pipe complete all as specified.

Dismantling of water tank of capacity exc. 250 & n.exc. 500 ltrs and removing from site complete all as specified and directed.

Supply & fixing 500 litres capacity rotational moulded polyethylene water storage tanks multi layer (cylindrical/vertical with closed top) conforming to IS-12701-96 complete including provision of all inlet, outlet, overflow and drain pipe and fittings complete all as specified and directed.

S&F for replacement of 10 litre capacity PVC valveless, syphonic action type,low level flushing cistern white complete with in let, ball valve float and handle incl bracket complete all as specified and directed.

Supply and fixing vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, excluding flushing cistern & flush pipe fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F pillar cock Cast copper alloy, chromium plated long neck, suitable for 15 mm bore pipe complete all as specified and directed.

S&F Gun-metal ball valve (quarter turn type) with MS lever handle, suitable for GI tubes 15 mm bore, ISI marked, screwed both ends for iron pipe, complete all as specified.

Material and labour for 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms),

S&F PTMT shelf 450 mm x 124 mm any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm) , complete all as specified.

S&F Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes , complete all as specified.

M&L for concrete bed to drain pipes 200mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2, complete all as specified.

M&L for concrete bed to drain pipes 600mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2, complete all as specified.

Material and labour 200mm dia reinforced concrete drain pipes, class NP2 laid and jointed with collar complete all as specified and directed.

Material and labour 600mm dia reinforced concrete drain pipes, class NP2 laid and jointed with collar complete all as specified and directed.

S&F Waste coupling of PTMT, for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (Minimum weight 45 gm) , complete all as specified.

S & F waste pipe 32mm dia, complete all as specified.

S & F Viterous China urinals, bowl type (back or corner wall type), of size 465 x 355 x 265mm white complete including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.

Demolition of reinforced cement concrete any thickness all as specified.

Forming contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

Labour for boaring tube well of 100mm dia by water jet system through any type of soil stratra incl hire and labour charge for boaring pipes, tools and plant as necessary and taking out them and lowering pipes, strainers, blind pipes etc and fittings and fixing the same complete and bucket washing and other incidental works in the connection the tube well should have a minimum 50mm gap in between the out side of the tube well pipes and other bore complete all as specified and directed.

Supply & laying high density polythene stainer of aproved make adapter conforming to IS specification 100mm dia complete all as specified and directed.

Packing the annular space between the out side of the tube well pipes & stainers and the bore with pea size washed gravel of approved quality having size from 2mm to 5mm on the size approved incl the cost of all materials and equipment complete all as specified and directed.

S&F UPVC pipes for under ground work of approved make (medium density) conform to ASTMD-1785 with all necessary accessories etc fitted incl cost of materials, joining materials, cutting pipes, cutting trenches below surface in all sorts of soil and refilling the same complete all as specified and directed.

Supplying & laying of approved quality pea shaped gravels (4mm to 6mm) in RC as per direction.

Supplying & laying coarse sand in RC as per direction.

subash chander bahl