Repairing and overhauling of By Pass B/C gear box Radicon make U 800, Reversible and A side shuttle conveyor make Radicon U 600 and ROM B/C premium make CBHZ 320 in PCH Section at Sawang Washery.

Amount

A. Repairing and Overhauling of U-800 radicon Dismantling of gear box and cleaning it

Fabrication of new worm gear of Phosphorus Bronze as per sample and cotter groove in its bore suitable to its shaft

Fabrication of steel worm shaft as per sample suitable to worm gear and bearings.

Building up loose bearing seat in pinion shaft with spl. Welding electrodes and finishing as per bearing 30313 and 30216

Building up damaged oil seal seat in pinion shaft and finishing as per the size of oil seal

Boring oversize the gear box body, fitting C.I. sleeve, locking it and reboring as per the size of bearing 30313

Fitting of oil seal 225 x 300 x 37mm

Fitting of oil seal 300 x 375 x 37mm

Reassembling units after repair done

B. Repairing and Overhauling of U-600 radicon Dismantling of Gear Box and cleaning it

Fabrication of new worm gear of P. B. as per sample and cotter groove in its bore suitable to its shaft

Fabrication of steel worm shaft as per sample suitable to worm gear and bearings.

Building up loose bearing seat in pinion shaft with spl. Welding electrodes and finishing as per bearing 7213 and 7311

Building up damaged oil seal seat in pinion shaft and finishing as per the size of oil seal

Boring oversize the gear box body, fitting C.I. sleeve, locking it and reboring as per the size of bearing 7312

Fitting of oil seal 45 x 65 x 120mm

Fitting of oil seal 250 x 325 x 12mm

Reassembling units after repair done

Repairing and overhauling of premium CBH2-320 Complete assembly dismantling in part by part for checking and rectification

Gear Box all pinion bearing bodies cover shafts block complete cleaning and washing for complete checking

Gear box input pinion teeth matching with 1st stage wheel shaft by shaping by grinding and sizing as per sizes matched with each other all teeth

Upper and lower body damaged and worm out both end bearing seats of input shafts bearing housing, repairing works by C.I. metal filling by welding method and grinding and shaping as per bearing size and repairing of input shaft as per size

Replacement of new bearing in 1st stage wheel shaft 32318 Make-NTN

Replacement of new bearing in outputl shaft 22224 Make-NTN

Fitting of input oil seal 65 x 85 x 10mm

Gear box repair kit like gasket packing, surface polishing and nuts bolt

Complete gear box assembling all pinion shafts, bearing setting, pinion and shaft alignment, tightening

Total impact of GST for the purpose of CTC

M/S S. V. ENTERPRISES (BID ID -1164268)

M/S S K ELECTRICAL (BID ID -1164269)