Construction Of Grampanchayat Office Building At Barabhai Tanda, Tq. Majalgaon

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means SSR Item No.21.02

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means SSR Item No.21.06

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. (Edsr It.no.21.4) (Reference No.BDA) (Additional Specification..As directed by Engineer in charge.

Providing and laying in situ, cement concrete in M­10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer, With natural sand. (Edsr It.no.24.01) (Reference No.BDE 1) (Additional Specification..Bd. E. 1 Page No. 287

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (Edsr It.no.25.11)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (Edsr It.no.25.31)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (Edsr It.no.25.50)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete.27.03

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.(Edsr It.no.21.37)

Providing and casting in situ cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. (Ι.ΝΟ.25.70, Ρ.ΝΟ.227)

Providing & casting in situ cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting, curing, finishing & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. (I.NO. 26.05,)

Providing and fixing in position TMT - FE-500 barreinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs (SR.NO.26.33, Ρ.ΝΟ.236)

Providing masonry with conventional / Indian standard type bricks in cement mortar 1:6 in superstructure including strikig joints, racking out joints and watering and scaffolding complete. ( INO 27.05 PNO 246)

Providing masonry with conventional / Indian standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm. diameter at every third course, properly bent and bounded at ends including scaffolding racking out joints and watering complete. I.NO 27.06 P.NO. 246

Providing and fixing frame with/without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. I.NO 39.02 Ρ.ΝΟ. 306

Item No. 16 Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. I.NO 39.10 Ρ.ΝΟ. 306

Item No. 17 Providing and fixing in position (as per 1868 /1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box I.NO 39.41

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/Sqm. As per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. I.NO 40.01 p.n 222

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. NO 39.68 Ρ.ΝΟ. 323

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. I.NO 32.01 P N 260

Providing internal cement plaster 12mm. thick in two coat in cement mortar 1:5 without neeru finish to concrete, brick surface, in all positions including scaffolding and curing complete using camant otc INO 32.02 P NO 260

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less han 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. I.NO 32.11 Ρ.ΝΟ. 261

Providing and fixing Vetrified Matt premium quality Finish decorative type tiles of size 590 mm to 605 mm X 590 mm to 605 mm. in size about5 to 8 to 10 mm. thick and confirming to IS 15622 -2006 (Group Bla) for flooring in required positions on plaster of 1.4 cement mortar filling joints with white cement slurry, curing and cleaning complete. (I.NO. 33.42, P.NO. 271)

Providing and fixing Vetrified Matt premium quality Finish decorative type tiles of size 590mm to 605 mm X 590 mm to 605 mm. in size abouts to 8 to 10 mm. thick and confirming to IS 15622-2006 (Group Bla) in required positions on plaster of 1.4 cement mortar filling joints with white cement slurry, curing and cleaning complete. b) I. no 33.43 P 271

Providing and applying white wash in one coat on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down complete. (Ι.ΝΟ.36.02, P.NO.284)

Providing and fixing Orissa Pattern type white glazed earthenware 580 X 440 mm. water closet pan, including trap cast iron soil and vent pipes upto the outside face of the wall, 1:2 lime concrete / 1:5:10 cement concrete bedding etc. complete. (As directed by Engineer in charge. . I.NO 42.33

Providing and laying ceramic tiles of RAK/Kajaria/Nitco/Asian or equivalent make having size 30 cm x 30 cm confirming I.S.15622/2006 (group D II-A)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. comploto INO 22.24R NO 268

Providing and laying ceramic tiles of RAK/Kajaria /Nitco/Asian or equivalent make having size 30 cm. x 30 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. I.NO 33.25 PNO 260

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface (excluding the primer coat) complete (INO 2612 PNO 2851

Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete. (excluding primer coat) complete. ( INO 35.15)

Providing and fixing on walls/ ceiling/floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. I.NO 42.55 P.NO.350

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters I.ΝΟ 42.53 Ρ.ΝΟ. 350

Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete oundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with RCC Cover INO 42.12 P NO 344

Providing and fixing 15 mm. diameter screw down bib/stop tap of brass including necessary socket union nut complete. (conforming to I.S. 781) Spec.No.: Bd.V. 8 Page 554 I.NO 41.40 Ρ.ΝΟ. 337

Providing and fixing white glazed earthenware wash Hand Basin of 55 cm. X 40 cm. size including single cold water pillar tap/brackets, rubber plugs and brass chain, stop tap and necessary P.V.C. pipe connections including P.V.C. waste pipe and without bottled trap upto the outside face of the wall. Spec. No.:Bd.V.30 Page No. 565 (Item No.41.63, Page No. 339)

Providing and laying in position PVC stabilized 100 mm, outer diameter for soil / waste pipe including necessary fitting such as P.V.C. bends with door tee with door single junction with door double junction with door P.V.C. clamps, nails rubber ring and making all connections I.NO 42.52 P n 250

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. (Ι.ΝΟ.22 .18 D NO 266

Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. Granite I.NO 33.22 P.ΝΟ. 268

Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 6524-1983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 INO 39 56 PNO 321

Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) ithout ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. (I.NO.39.58, P.NO. 321)

Please Enable Macros to View BoQ information