SPECIAL REPAIR TO SMQs BLOCKS NO P-46 (1 TO 8 QTRS) AT AIR FORCE STATION DALHOUSIE

Amount

Taking down cement plasters on brick or conc surfaces incl racking out joints, hacking for key complete all as specified and directed by Engr-In-Charge.

Rendering 15mm thick cement plaster in CM (1:4) on brick or conc surfaces finished and smooth without using extra cement complete all as specified and directed by Engr-In-Charge.

Rendering 10mm thick cement plaster in CM (1:3) on brick or conc surfaces on ceiIing finished and smooth without using extra cement complete all as specified and directed by Engr-In-Charge.

Dismantiling tiles flooring/dado, hearth including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premised complete all as specified and as directed by Engineer-in-Charge

Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-In-Charge.

Glazed ceramic coloured,,tiles 300x200x6-7mm thick in vertical surfaces such as skirting,dados and risers to steps over and including 10mm thick in CM (1:4) complete all as specified and directed by Engr-In-Charge.

M&L timber framed and fixed Clean sawn second class hard wood in scantilings complete all as specified and directed by Engr-In-Charge.

M&L 30 mm thick 2nd Class Hard Woodbording in floor and skirting one side planed with butt joints and fixed with nails suppled and fixed complete all as specified and directed by Engr-In-Charge.

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) with old size bricks complete all as specified and directed by Engr-In-Charge.

Brick work with sub class 'B' bricks half brick thick straight or curved on plan to any radius in half brick walls built in CM(1:4) complete all as specified and directed by Engr-In-Charge.

Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-In-Charge.

Machine cut kota stone slabs flooring 20-25mm thick, as in riser and trades and the like set & jointed in neat cement slurry over & including screed bed over cement slurry screed 15mm thick in CM (1:4) incl rubbing and polishing, rounding or bullnosing the exposed edges complete all as specified and directed by Engr-In-Charge.

Black Granite stone ,18-19 mm thick as in kitchen platform incl cutting and rounding or bullnosing the exposed edges over 15 mm thick screed in CM 1:3 complete all as specified and directed by Engr-In-Charge.

Supply and fixing of Vitreous China wash basin, white Flat back , size 550x400 mm including brackets, waste cupling and waste pipe complete all as specified and directed by Engr-In-Charge.

Supply and fixing of Vitreous China Squatting pan, 'Orissa pattern, size 580x440 mm white with integral foot rests including PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, In repair complete all as specified and directed by Engr-In-Charge.

Supply and fixing in repair 15 mm dia PVC connection with brass check nut of length 450/600 mm complete all as specified and directed by Engr-In-Charge.

Supply and fixing in repair CP grating doom 125 mm dia with cockroach trap fixed properly to the floor and sealed properly and finished with white cement complete all as specified and directed by Engr-In-Charge.

Supply and fixing in repair CP grating doom 125 mm dia with waste hole and cockroach trap fixed properly to the floor and sealed properly and finished with white cement complete all as specified and directed by Engr-In-Charge.

Supply and fixing in repair 32 mm dia bore PVC flexible pipe for wash hand basiin and kitchen complete all as specified and directed by Engr-In-Charge.

Complete removal of existing treatment on walls and applying distempering two coat on walls and with oil bond distemper, white or tinted over and including 5 mm thick chalk whiting on plastered surfaces incl preparatory to distempering complete all as specified and directed by Engr-In-Charge.

Complete removal of existing treatment and applying distempering two coat on walls and with oil bond distemper, white or tinted over and including 5 mm thick chalk whiting on plastered surfaces preparatory to distempering incl complete removal of existing treatment on walls complete all as specified and directed by Engr-In-Charge.

Providing reinforced cement concrete 1:2:4 type B-0 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-In-Charge.

MS bars TMT 8 to 10mm dia cut to length and bend to shape incl binding with MS wire annealled not less than .9mm dia & over 10mm dia complete all as specified and directed by Engr-In-Charge.

Supply and fixing of brass CP Mixer for(WHB) mixing hot & cold water screwed for iron pipe and fixed complete and all as specified in repair complete all as specified and directed by Engr-In-Charge.

Supply and fixing of brass CP wall Mixer for mixing hot & cold water screwed for iron pipe and fixed complete and all as specified in repair complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 15mm dia bib taps CP brass,fancy type,long body, screwed down, screwed for iron pipe in repair complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 15mm dia Angle cock chromium plated brass fancy type ,screwed down , high pressure, scrwed both ends for iron pipe in repair complete all as specified and directed by Engr-In-Charge.

Supply and fixing of CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-In-Charge.

Supply and fixing of cast iron Nahani trap(dia of outlet 75 mm), with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-In-Charge.

Cutting chases in stone wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 15mm GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors complete all as specified and directed by Engr-In-Charge.

All as per Item No-32 above but 20mm dia complete all as specified and directed by Engr-In-Charge.

All as per Item No-32 above but 25mm dia complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in repair complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 100mm bore Bend any radius fitted with oval access door complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 100 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 100 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fix to wall complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 100mm bore Bend any radius complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 75 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fix to wall complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 75 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 75 mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 75 mm bore Bend any radius fitted with oval access door complete all as specified and directed by Engr-In-Charge.

Supply and fixing of CI cowls 100mm bore complete all as specified and directed by Engr-In-Charge.

Supply and fixing of Salt-glazed stoneware gully traps of size 150x100mm , square or round mouthed, tvpe 'P' complete all as specified and directed by Engr-In-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-In-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in hard/dense soil complete all as specified and directed by Engr-In-Charge.

Taking down chowkats or frames incl shutter exc 1.50Sqm but nexc 4.00Sqm complete all as specified and directed by Engr-In-Charge.

Taking down chowkats or frames incl shutter n.exc 1.5 Sqm complete all as specified and directed by Engr-In-Charge.

Taking down steel water tubing 15 mm with all fittings from walls, ceiling and floors, complete all as specified and directed by Engr-In-Charge.

Taking down steel water tubing 20 mm with all fittings from walls, ceiling and floors, complete all as specified and directed by Engr-In-Charge.

Taking down steel water tubing 25 mm with all fittings from walls, ceiling and floors, complete all as specified and directed by Engr-In-Charge.

Demolation and breaking of AC/PVC drain pipes 75mm to 100mm dia, jointed in cement mortar/PVC Solvent/Lead, fixed to wall or taking out of trenches complete all as specified and directed by Engr-In-Charge.

Providing, 50 mm thick cement concrete 1:3:6 in plinth protection type C-1 with 20 mm graded aggregate finised even and smooth without using extra cement complete all as specified and directed by Engr-In-Charge.

Forming Contraction (Dummy) joints 50 mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified and directed by Engr-In-Charge.

Cement concrete in surface channels and drains in cement concrete 1:3:6 type C1 (20 mm graded aggregate) finised even and smooth using extra cement complete all as specified and directed by Engr-In-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed by Engr-In-Charge.

Preparation of old steel surfaces surfaces of any descp ot otherwise described over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified and directed by Engr-In-Charge.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-In-Charge. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-In-Charge.

Cutting holes in Stone walls exceding half and n.exc one brick in cement mortor for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by Engr-In-Charge.

Supply and fixing 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed by Engr-In-Charge.

Supply and fixing 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-In-Charge.

Supply and fixing 125 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-In-Charge.

Supply and fixing Continuous (piano) hinges 30 mm wide , mild steel, bright finish or electrogalvanised complete all as specified and directed by Engr-In-Charge.

Supply and fixing 100 mm Hasp and staple, safety type, aluminium anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-In-Charge.

Supply and fixing 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-In-Charge.

Supply and fixing sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs washers and wastes, including bedding in cement mortar to dward wall or including fixing cantilever brackets and connection union to pipe overall size 410x330x160mm complete all as specified and directed by Engr-In-Charge.

Dismantling Plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-In-Charge.

Supply and fixing of Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour haveng strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-In-Charge.

Supply and fixing of Pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.5 mm thick of an colour haveng strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-In-Charge.

Supply and fixing of floor door stopper of aluminium allouy body and tongue, 140 mmm anodised, with hard drawwn steel spring fixed in floor complete all as specified and directed by Engr-In-Charge.

Dismantling old Wall and ceiling boards (fiber, pulp insulation/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-In-Charge.

Supply and fixing of Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed by Engr-In-Charge.

Non-asbetos ceiling board 0.595 x0.595 mtr x 4mm thick designer boards of everest or equvalent fixed with powder coated GI framing including drilling hole for fixing GI frame including 4mm GI wire suspender and clips complete all as specified and directed by Engr-In-Charge.

Supply and fixing of steel windows in double layer with side hung shutters including projecting type hinges with steel handle, and steel peg stay and grill of 12 mm squar bar complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-In-Charge.

Supply and fixing of steel Ventilator with single layer with side hung shutters including projecting type hinges with steel handle, and steel peg stay and grill of 12 mm squar bar complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-In-Charge.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with beads in squares n exe o.5 sqm each pane complete all as specified and directed by Engr-In-Charge.

Supply and fixing 3 mm thick figured glass, pin had type and glazing with beads in squares n exe o.5 sqm each pane complete all as specified and directed by Engr-In-Charge.

Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed stainless steel wire staples complete all as specified and directed by Engr-In-Charge.

Supply and fixing Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed by Engr-In-Charge. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fixing Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed by Engr-In-Charge. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

PCC type C-0 (1:3:6) using 12.5 mm graded stone aggregates as I filling of MS sheet chowkats, complete all as specified and directed by Engr-In-Charge.

Supply only Liquid water proofing compound complete all as specified and directed by Engr-In-Charge.

Supply and fixing in repair 19mm particle board, medium density, flat pressed single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed by Engr-In-Charge.

Dismantling water tanks exc 250 ltr and n exc 500 ltr and removing to store complete all as specified and directed by Engr-In-Charge.

Supply and fixing 35 mm plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply on both faces. The size of rail and stile as per IS 1003(part I) complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 35 mm thick glazed and skelton shuters , open rebated and prepared to receive galss , gauze , etc, (with out sash bars) , edges of framing plain , chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as speified in SSR Part I section 8 , clause 8.24 complete all as specified and directed by Engr-In-Charge.

Preparation of wooden surfaces and painting of wood surface of any description, not otherwise described two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.

Supply and fixing of 25 mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-In-Charge.

Supply and fixing of 20 mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-In-Charge.

Supply and fixing of Drapery curtain rod of metalic 20 mm dia covered with pvc coating complete with MS bracket golden colour rings and side caps for every one meter fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed by Engr-In-Charge.

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1:3) or plaster of paris and to match/finish new surface as the existing surface either by using same colour distemper, putti or white/colour wash complete all as specified and directed by Engr-in-charge.

Taking down main switch/DB/changeover/AC box of any capacity including fixing accessories of single/three phase complete all as specified and directed by Engr-in-charge.

Concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white/ivory PVC conduit medium grade ISI marked not less than 19mm dia with all conduit accessories/fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6mm with earth dolly and bakelite laminated sheet 3mm thick ISI marked for fixing of switches/sockets, fan regulators, wall mounting fittings, door bell & bulkhead/telephone socket etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching/finishing of new surfaces either by means of plaster of peris/putti or distemper/colour wash with same existing colour surfaces complete all as specified and directed by Engr-in-charge for the following:- (a) One light, fan, bell point controlled by one switch

(b) One light point controlled by two 2 way switch

(c) One 5 Amp socket point controlled by one switch on same board

(d) 5 Amp independent socket point controlled by one switch

All as per item No. 97 above but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, standared 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheated, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed by Eng.-in-charge.

Switch flush type single pole one way 5 Amps, 240 volts, white finish, ISI marked complete all as specified and directed by Eng.-in-charge.

Switch flush type single pole two way 5 Amps, 240 volts, white finish, ISI marked complete all as specified and directed by Eng.-in-charge.

Switch flush type single pole one way 15 Amps, 240 volts, white finish, ISI marked complete all as specified and directed by Eng.-in-charge.

Socket outlet 5 pin, 5 Amps, 240 volts flush type white finish ISI marked complete all as specified and directed by Engineer-in-Charge.

Socket outlet 2 in 1, 3 pin, 5 & 15 A, 240 volts, flush type white finish, ISI marked complete all as specified and directed by Engr-In-Charge.

Supply and fixing bell push, flush type 5 Amps white finish, ISI Marked complete all as specified and directed by Engr-In-Charge.

Supply and fixing door bell multi music type 230V, single pole ISI Marked complete all as specified and directed by Engr-In-Charge.

Supply and fixing ceiling rose, surface backlite, 65x 20mm 3 terminal ISI marked complete all as specified and directed by Engr-In-Charge.

Supply and fixing lamp holder insulated body with back plate suitable for angle/batten fitting ISI Marked complete all as specified and directed by Engr-In-Charge.

Sheet metal enclosure VTPN MCCB DB 4 Way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 as per IEC 61439-3 suitable for flush mounting complete with 250 A copper bus bar for each phase with 2 neutral and 2 earth bus bars with cable ties for cable management for DB's when MCBs & MCCB 100 Amps (as incomer) to be used, fixed properly in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as specified and directed by Engr-In-Charge.

Sheet metal enclosure Double door metallic for DB when MCBs to be used SPN 12 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed by Engr-In-Charge.

Supply and fixing in replacement MCB SP 240 volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as directed by Engr In Charge.

All as per item Srl No 110 but SPN 16-32 Amps complete all as directed by Engr In Charge.

Supply and fixing MCCB 100 Amps, 3 Pole, 415 V, 25 KA thermal magnetic adjustable type with short circuit and overload protection complete all as directed by Engr In Charge.

Sheet metal enclosure, 32A single pole and neutral with a two pin and earth plug and socket complete in metal clab board (industrial type) with one single pole MCB 32 Amp fixed properly complete all as directed by Engr In Charge.

Sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 10 sqmm drawn in and including rigid non metallic white/ivory PVC conduit medium grade ISI marked not less than 19mm dia with all conduit accessories/fittings such as junction boxes, bends, tee, elbow etc laid in concealed position with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire including cutting the chases and making good the surface by cement mortar (1:3) and for matching/finishing of new surfaces either by means of plaster of peris/putti or distemper/colour wash with same existing colour surfaces complete all as directed by Engr In Charge.

Supply and fixing decorative ultra slim linear LED lighting fixures with extruded polycorbonate environmental friendly energy saver LED light fitting 1x20/22 watt (4'), 230 Volts, single tube mounting including LED tube 20/22 watt complete with electronic driver spring loaded rotory type lamp holder, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection with three core copper cable from ceiling rose to led light fitting complete all as directed by Engr In Charge.

All as per item ser No 115 above but 1x10/12 Watt (2') complete all as directed by Engr In Charge.

Supply and fixing decorative LED wall light fixture made up of polycorbonate body suitable for 9 W LED lamp B22 base, 230 volts, including LED lamp 9 watt complete and electrical connection with three core copper cable from ceiling rose to LED light fitting complete all as specified and directed by Engr-In-Charge.

Supply and fixing building security light fitting new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07 of 25 watt LED, 240 volts incl bracket made out of GI pipe 25mm dia medium grade, 0.9 mtr long bent to shape with welded MS flat 25x6mm for mounting of fitting & MS flat iron clamps made out of 25mm x 6mm thick FI nuts, bolts Complete all as specrified and directed by Eng-in charge

Supply, fixing, installation and testing of ISI marked, energy efficient, water heater storage type made of ultra-thick super cold rolled steel plates, incoloy glass-coated heating element offering superior heating performance, electricall operated, single phase, 50Hz (BEE 5 star rating), complete of 25 letr capacity suitable to withstand 8 bar pressure with whirlflow technology and adjustable knob for convenient setting of temperature with and including supply and fixing, wire armoured 450mm long, 15mm dia brass coupler etc, flexible pipe suitable to withstand upto 100 degree celcius for hot and cold water, anchor fastner -04 Nos of suitable size, 3 core PVC insulated, FRLS multistranded copper conductor cable and plug top 15 Amps capacity complete all as specified and directed by Engr-In-Charge. Note : Old unserviceable geyser is to be deposited to MES store yard.

Supply and fixing heavy duty exhaust fan AC single phase 230/240V of size 300mm sweep 1400 RPM with louver & shutter including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and necessary grouting on wall complete and making good the wall surface after fixing of exhaust fan complete all as specified and directed by Engr-In-Charge. Note : Old unserviceable exhaust fan is to be deposited to MES store yard.

Supply and fixing exhaust fan AC single phase 230/240 V of size 250/300mm sweep, 1200 RPM made of sturdy engineering plasticwith louver & shutter and copper winding including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and grouting on wall complete and making good the wall surface after fixing of exhaust fan complete all as specified and directed by Engr-In-Charge.

Suppy and fixing LED lamp 12 watt, 240 volts complete all as specified and directed by Engr-In-Charge.

Earthing complet with copper earth plate electrode 600x600x3.15mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with to edge of earth plate not less than 1.5 Mtr below normal ground level connected to copper strip 20x3 mm as earth lead by means of bolts, nuts washers and check nuts of steel/GI duly protected with 40mm bore light grade pipe upto main board, 20mm bore watering pipe light grade with CI/MS funnel and wire mesh including excavation, earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, add charcoal dust and common salt after midxing with BFC (Back Fill Compound) inadeqate quantity as recommended by the manufacturer or as directred by the Engr-in-charge all as shown in electrical plate No 03 of SSR Pt-I 2009 having pit in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in CC pit for CI cover of required size, funnel with wire mesh complete all as specified and directed by Engr-In-Charge.

Supply and fixing copper strip 20x3mm complete with saddles/insulators made out of PVC or fibre and fixing screws for roof conductor/down conductor including welding or brazing for joint all as required at site or complete all as specified and directed by Engr-In-Charge.

Supply and fixing single phase electronic meters tamper proof LCD display with polycarbonate cover 230V of rating 10 Amp to 60 Amp, accuracy class I 50Hz, confirming to IS 13779, IP-54, with parameters to shown date, time, current reading, load, PF, voltage and KWH including provision of suitable size of transparent PVC housing/enclosure with all necessary connection and grouting on wall complete and making good the wall surface after fixing the meter complete all as specified and directed by Engr-In-Charge. Note : Old unserviceable geyser is to be deposited to MES store yard.

Supply, laying testing and connecting 25 Sqmm 3.5 Core XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade laid in trenches/ducts/wall or through pipe with suitable size of cable glands, crimping type cable lugs complete all as specified and directed by Engr-In-Charge.

Supply and fixing GI tubing light grade 50mm bore with all fittings such as tees, elbows, sockets, bends etc laid in trenches, ducts, floor for protection of cable, fixed to wall or poles including fixing arrangement complete all as specified and directed by Engr-In-Charge.

Supply and fixing GI tubing light grade 25mm dia such as tees, elbows, sockets, bends etc cut of size and bent to shape all as required at site including fixing arrangement with necessary clamps of required size at site and providing appropriate size of insulators to pipe from foundation of air termination rod complete all as specified and directed by Engr-In-Charge.

Material and Labour for air termination single pointed copper rod 12mm dia and 300mm long complete all as specified and directed by Engr-In-Charge.

Material and labour for test point terminal block made of gun metal or phosphorus bronze of size 75x75x6mm drilled and screwed including 03 Nos 8mm dia 25mm long hex head screw complete all as specified and directed by Engr-In-Charge.

Havish Construction

M/S G P MARWAHA

Surya & Gautam Builders

M/S RAJESH SHARMA & CO.

M/S RUDHRAKSH TRADING CO

SUBASH MAHAJAN

M/S SINGHAL ENGINEERS