Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.0 LAccepted-AOC UTARLAI KAWAS BARMER RAJASTHAN 344 001 | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC AOD | |
| 2 | L2₹10.4 L+₹1.2 L (13.1%)Rejected-Finance | L2 | Rejected-Finance Highest | |
| 3 | L3₹11.3 L+₹2.1 L (23.3%)Rejected-Finance VILL JASSAI DISTRICT BARMER RAJ 344001 | JASSAI | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Highest |
Tender Value
₹9.7 L
EMD Value
₹19,420
Closing Date
14 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY BARMER
MILITARY ENGINEER SERVICES GARRISON ENGINEER ARMY JALIPA MIL STN POST BOX NO 53 BARMER 344001
SPL REPAIR TO BLDG N0 P 48 COOK HOUSE AT JALIPA MIL STN UNDER GE ARMY BARMER
2022_MES_518117_1
8633/E8
Open Tender
Civil Works
Item Rate
180 days
GE ARMY BARMER
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE ARMY BARMER
₹19,420
25 Jun 2022
14 Apr 2022
16 May 2022
14 Apr 2022
14 May 2022
30 Apr 2022
60 days
Amount
M&L for Demolition of cement concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and also for portions ordered to be dismantled.
M&L for Demolition of brick work or stone/boulder masonry,built in cement mortar or cement lime mortar portions ordered to be dismantled.
M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L for Dismantling boarding, any description, fixed in any position with nails
M&L for Taking up or down 15mm steel tubing and connections etc complete .
M&L for Taking up or down 20mm steel tubing and connections etc complete .
M&L for Taking down unserviceable chowkhat or frame with shutter (without taking off shutter from the frames) exc 1.5 sq.m but n. exc 4 Sqm each .
M&L for Taking down unserviceable chowkhat or frame with shutter (without taking off shutter from the frames) n exc 1.5 sq.m each .
M&L for Taking down and refixing in same opening for chowkhat or frame with shutter (without taking off shutter from the frames) n exc 1.5 sq.m.
M&L for Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc cement or cement lime plaster
M&L for Dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid,bedded and pointed in any mortar.
M&L for Dismantling plain or corrugated steel sheeting,any gauge,thickness including Nainital or similar pattern roof coverings.
M&L for Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in concrete.
M&L for Demolition and breaking up drain pipes 100mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar
M&L for Demolition and breaking up drain pipes 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar
M&L for Formwork to soffits of suspended flat slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for rough finished surfaces of concrete.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams for fair finished surfaces
M&L for Formwork to fair finished surfaces edges of concrete flats, treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm wide.
M&L Mild steel bars 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L mild steel TMT bars 6mm to 8mm dia and , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L mild steel TMT bars 5mm dia and over up to and including 10mm dia in stirrups,spacers and binders hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L RCC M-25(Design mix) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M&L RCC M-25(Design mix) for chajjas etc.
M&L RCC M-25(Design mix) for beams,cantilevers,bressummers,lintel over 1.5M span
M&L for plastering 5mm thick in C:M 1: 3 in (concreate surface)ceiling finished even and smooth without using extra cement.
M&L for Plastering 15mm thick in CM (1:4) s on stone wall surface(internal wall surface) finishing the surface even & smooth
M&L for Plastering 15mm thick in two layers on brick work,concrete surface 1st coat is 10mm thick in CM(1:6) second coat of plaster which is 5mm thick in CM(1:4)(external wall surface) finishing the surface even & smooth with mixing of water proofing compund in as per manufacture instructions. Water proofing compund shall be measured and paid sepeartely as supply only rate.
M&L for Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses
M&L Raised pointing in CM(1:4) to random or polygonal rubble, un?coursed or brought upto courses
M&L Plastering 15 mm thick in CM (1:6) on stone wall surface finished even and smooth without using extra cement on internal wall.
M&L stone walling of random rubble, uncoursed, well bonded,beded and solidly hearted built in CM(1:6) in walls, and similar work
M&L Non - skid coloured ceramic tiles 7 to 8 mm thick over 15mm thick screed in CM(1:4) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match for joint free non skid tiles.
M & L for coloured glazed cermic tiles size 350x250x7mm/450x350x7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement/coloured cement to match the tiles. etc complete .
M & L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint .
M & L for Preparation of old painted surfaces of wall and applying one coats of cement base paint .
M&L for Prepration of new plastered surface of ceiling and applying three coat of white wash in ceiling
M&L for Prepration of old white washed surface of ceiling and applying 2 coat of white wash in ceiling
M & L for preparation newly plastered surfaces on wall & applying a layer of wall care putty 3 mm thick(averaging) on wall surfaces including cornices etc for proper levelling of plaster and two coat of oil bond distemper over a coat of primer complete all as specifed and directed.
M&L for complete removal of existing treatement of walls and prepare the wall surface with wall care putty and than applying a coat of primer and over it applying two coat of distemper oil emulsion white or tinted.
S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforsed with MS square tube supplying and fixing in opening as per specification & drawing
S/F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for tiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement supplying & fixing in the frame at site all as specification and drawing .
S&F barrel tower bolt 150mm long aluminium anodised extruded section
S&F aluminium anodised handle 150mm long cast type
S&F 150mm long aluminium alloy anodised hinges
S&F powder coated aluminium(minimum thickness of powder coating 50 micron) work for doors,windows and ventilators and fixed partitions(Fixed portions) with extruded built up standrad tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS 1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions,ie. at top,bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smoth,rust free,straight,mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/paneling,CP.brass/stainless steel screws all as complete as per architectural drawings and the directions of Engr-In-Charge.
S&F powder coated aluminium(minimum thickness of powder coating 50 micron) for shutters of doors,windows and ventilators including providing and fixing hings/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required(Fittings shall be paid for separately) with extruded built up standrad tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS 1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions,ie. at top,bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smoth,rust free,straight,mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/paneling,CP.brass/stainless steel screws all as complete as per architectural drawings and the directions of Engr-In-Charge.
S&F anodised aluminium grill(anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern,with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws@200mm centre to centre,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,all complete as per requirement and direction of Engr-In- Charge.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S & F Mortice lock vertical type of size 100mm Brass 4 levers
S & Fixed in repair Mortice lock vertical type of size 100mm Brass 4 levers
M&L rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc Fe-410-W(Gde E-250) quality.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for Relaying /Re - fixing Old water tubing 15mm/20mm dia (bore) and connections in new or old position after cleaning both inner and outer surfaces of pipes including provision of New GI fittings (as ordered), complete all as specified and as directed.
S&F 20mm outer diameter dia CPVC pipe SDR 11 & plain CPVC SDR 11 fitting in trenchs fitting complete.
S&F 32mm outer diameter dia CPVC pipe SDR 11 & plain CPVC SDR 11 fitting in trenchs fitting complete.
S&F 20mm outer diameter dia CPVC pipe SDR 11 & plain CPVC SDR 11 fitting on walls /ceiling fitting complete.
S&F 32mm outer diameter dia CPVC pipe SDR 11 & plain CPVC SDR 11 fitting on walls/ceiling fitting complete.
S&F 5.50mm thick sheet glass ordinary quality and glazing with oil patty in Sqm n.exc 0.50 Sqm in each pane
S&F 5.50mm thick sheet glass ordinary quality and glazing with oil patty in Sqm exc 0.50 Sqm in each pane
S&F 5mm thick figured glass pin head type and glazing with oil putty in square n.exc 0.50 sqm each pane
S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers
M&L for Dismantling water storage tanks ( exc 500 Ltr and not exc 1000 Ltr) and removing to store.
M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of water tank exc 500 ltr n,exc 1000 ltr
M&L for Rotational moulded polyethylene water storage tanks exc 500 Ltr and not exc 1000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
S&F 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed
S&F double socketed 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal
S&F 110mm PVC (SWR) couplers
S&F110mm PVC (SWR) vent cowl
S&F 110mm PVC (SWR) 'P’ trap
S&F 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent
S&F in repair 15mm stop valve/angle cock chromium plated cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore.
S&F in repairs bib tap, 15mm bore, fancy type, brass chromium plated screwed down screwed for iron pipe or for brass ferrule complete.
S&F in repair vitreous China wash hand basin of size 550x450mm with CI bracket and comprising of the following :- (a) Waste fitting 32mm dia brass chromium plated with long screwed shanks and fly nut flange end bedded in red lead cement and other end fixed. (b) 20mm Pillar tap cast copper alloy with capstan head chromium plated, screwed down, high pressure with or without leltered hot or cold with long screwed shank and fly nut. (c) PVC waste pipe 32mm dia 600mm long. (d) PVC Connection 15mm size with PTMT nuts of length 450mm long.
M&L for Mirror polishing on marble/granite/Kota stone work where ever required to give high gloss finish complete
S&F in repair vitreous china squatting pan "Orissa' pattern size 580x440 mm white with integral foot rest with cement concrete complete all as specified.
S&F fixing in repair 10 Ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connection to pipes and fixing of lever.
S&F in repair PVC connection 15mm size 450mm long with brass fly nuts and washers on both ends complete.
S &Fixed in repair brass chromium plated shower rose to steel pipe or union complete all as specified and as directed.
S&F in repair sink withaut draining board made of stainless steel 0.80 mm thick with plugs, washers and wastes, incl fixing cantilever brackets and connecting union to pipe, overall size 495 mm X 420 mm bowl size 410 mm X 330 mm X 160 mm with flush pipe complete
S&F in repair sink with draining board made of stainless steel 0.80mm thick with plugs, washers and wastes, incl fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm bowl size 410 mm X 330 mm X 160 mm with flush pipe complete
S&F in repairs 20mm dia aluminium anodised tubular Curtain rail wooden finish along with 8 Nos rings for per Running meter
S&F in repairs brackets of Aluminium anodised for 20 mm curtain rod complete all as specified and as directed by Engineer -in -charge.
S&F in repair towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minumum weight 170 gms)
M&L 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate etc complete.
M&L 15mm thick Screed bed in CM(1:4) mixed with water proofing compound as per manufacturer instructions or bedding layer of mortar 15 mm thick for laying floor finishes.
M&L for Taking down old membrane and Preparing surfaces by brushing with wire brushes for removing caked mud etc. swe?eping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.
Suppy only bitumen primer for use in waterproofing and damp proofing treatments(0.40 Ltr per Sqm.(Density at 25 C lin range of .87-.89)kg/Ltr and viscocity of 72 to 160 CPS etc complete.
M&L for Priming surfaces and applying normal tratment (for moderate conditions) using glass fibre base bitumen felt grade 2
M&L for laying of APP based polymeric membren minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gm/sqm) laid on primed surface by torched application complete etc all as per manufacturer instructions.
Supplying only liquid Integral waterproofing compound etc comptete.
M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of granite
M&L preparation of APP membrane and two coat of aluminum paint over a coat of aluminum primer complete.
S&Fixed in repair Particle board, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work
S&Fixed in repair Plain/ architectural fillets/strips (n exc 3 sq cm) square, rectangular,bullnosed,splayed or chamfered in section, clean sawn, se-cured with nails or brads.
M&L preparation of new surface of any descriptionand applying two coat of varnishing, not exc 10 cm in width or girth when unconnected with other work or painted in different tint
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, brass polished
S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised
M&L for Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc
M&L for Taking down unserviceable main switch/DB, Teak wood boards etc
M&L for Taking down submain wiring of any size complete all as directed.
M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories including necessary pressed steel terminal boxes flushed in wall and 3 mm thick ISI marked laminated sheet cover and SS screws with cup washers for fixing switches, sockets, fan regulators etc. including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for one light /CB point controlled by one switch, complete all as specified and as directed.
All as per Srl item No 106 above but for one ceiling fan point controlled by one switch.
All as per Srl item No 106 above but for one exhaust fan point controlled by one switch.
All as per Srl item No 106 above but for one 3/2 Pin 5 Amp socket out let point on the independent board.
All as per Srl item No 106 above but for one socket outlet 3/2 pin, 5 Amp, point on the same board with other switches.
All as per Srl item No 106 above but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket point.
All as per Srl item No 106 above but with cable 4 sqmm including 4 sqmm cable as earth wire for 15/16 amp socket point.
Supply and fix single pole and neutral enclosures with a two pin and earth plug and socket complete with one double pole MCB 10 A ,240 V complete all as specified and as directed.
Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and as directed
Supply and fix socket outlet 2in1, 3pin,5A complete all as specified and as directed.
Supply and fix socket outlet 2in1, 3pin,6/16 A complete all as specified and as directed.
Supply and fix switch piano flush type single pole one way 15 Amps complete all as specified and as directed.
Supply and fix ceiling rose surface bakelite 65x50 mm two to three terminals.
Supply and fix step type electronic fan regulator flush type, 230 volt, AC complete.
S&F Supply and fixing single pole 06 to 32 A rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing andcommissioning, complete all as specified and as directed
All as per Srl item No 120 above but SPN 32 A rating complete all as specified and as directed
All as per Srl item No 120 above but TPN 63 A rating complete all as specified and as directed
S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 8 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed.
S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, TPN 4 way with 200 Amps rated bus bar , 415 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed.
Supply and fix exhaust fan 300 mm sweep with louvre complete fixed to wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible copper conductor cable 24/0.2mm , Metal exhaust fan and taking down the existing exhaust fan and deposit in MES store complete all as directed
M&L for Taking down ceiling fan in serviceable condition and refixing the same location after oiling/greasing as required complete all as specified and as directed
M&L sub main wiring concealed type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run o f 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and as directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).
Supply and Fixing storage type electric water heater of 25 Ltrs capacity, 240 volts, rated input 2 KW, PUF insulated fitted with stainless inner container and cooper coil of BEE rating 5 star models, max working head of water 60 Mtrs, fixed to wall with suitable MS tower/anchor bolts,Inlet/outlet pipe, grouted to wall complete all as specified and as directed
Supply & Fix tube galvanised medium grade 15 mm dia with all fittings, bends, tees etc conealed in walls including threading and connecting with the existing pipe with a "Tee" and clamps with bolts, nuts etc for fixing and making good the disturbed surfaces complete all as specified and as directed.
Supply & fix PVC metal braided connection pipes for hot water supply with brass adopters 15 mm dia and 450mm long.
Supply and fix stop valves cast copper alloy 15 mm bore dia screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed
S&F bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
Fixing only LED tube light fitting retrived from old existing location, in serviceable condition and connectiong up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed
S & F LED batten suitble for indoor application 20 W, 4' length , wall mounted with aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge
M & L lamp holder (Angular) PVC/poly carbonate type with back plate suitable for batten fittings
Supply & fix LED lamp 10 W , min lumen output 950 lumens at 6500 K CCT for batten holders complete all as specified and as directed.
M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed
Kusum Traders
m/s jogaram sujaram
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .