Construction of 33 KV Line of 33 11 KV Substation nanpur moradabad

Carriage/ Loading & Unloading of Material from any Store Centre under PVVNL, depending upon the availability of material, to site. (For S.no-1.01 to 1.05) 1.01- 9 Mtr. PCC Pole

11 mtr. Long STP, SP-55 round Pole.

13 mtr. Long STP, SP-72 round Pole.

All other Material except Poles.

3x300sqmm XLPE 33KVCable

The excavation of foundation pit in mix soil/normal soil/soft & hard rock and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support and Erection of support in the pit, after fixing stone pad including providing of stone pad as per Respo Norms. The work includes carriage and handling of supports from sectional store to pit site as well as fabrication work if required. ( For S. No-2.01 to 2.12) 2.01- 9M Long PCC Pole (Single Pole)

11 mtr. Long STP round Pole. (Single Pole)

13M Long STP, SP-72 Round Pole (Single Pole)

9M Long PCC Pole (Double Pole Structure)

11 mtr. Long STP round Pole. (Double Pole Structure)

13M Long STP, SP-72 Round Pole (Double Pole Structure)

9M Long PCC Pole (Tri Pole Structure)

11M Long STP, SP-55 Round Pole (Tri Pole Structure)

13M Long STP, SP-72 (Tri Pole Structure)

9M Long PCC Pole (Four Pole Structures)

11 mtr. Long STP round Pole. (Four Pole Structure)

13M Long STP, SP-72 Round Pole (Four Pole Structure)

Providing & Fixing of all earthing clamps as per Respo Norms.( For S. No-3.01 to 3.12) 3.01- 9M Long PCC Pole (Single Pole)

11 mtr. Long STP round Pole. (Single Pole)

13M Long STP, SP-72 Round Pole (Single Pole)

9M Long PCC Pole (Double Pole Structure)

11 mtr. Long STP round Pole. (Double Pole Structure)

13M Long STP, SP-72 Round Pole (Double Pole Structure)

9M Long PCC Pole (Tri Pole Structure)

11M Long STP, SP-55 Round Pole (Tri Pole Structure)

13M Long STP, SP-72 (Tri Pole Structure)

9M Long PCC Pole (Four Pole Structures)

11 mtr. Long STP round Pole. (Four Pole Structure)

13M Long STP, SP-72 Round Pole (Four Pole Structure)

Fixing of 33KV V-type cross arm 100x50x6mm, 33KV F-bracket, 33KV Pin Insulator, 33KV Pin including providing of required clamps, nut & bolt as per Respo Norms.( For S. No-4.01 to 4.03) 4.01- 9M Long PCC Pole (Single Pole)

11 mtr. Long STP round Pole. (Single Pole)

13M Long STP, SP-72 Round Pole (Single Pole)

The work includes carriage and handling of required accessories, from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 3.5mtr, from M.S.Angle 65x65x6mm/ 50x50x6mm, E-bracket, Dist insulator, top channel 125x65mm, 3200mm, 33KV Disc fitting, 33 KV pin insulator, 33KV Pin etc including providing of E-brackets, required clamps, Nut & bolts as per Respo Norms/ as per schedule with required assocries . (For S. No- 5.01 to 5.09) 5.01- 9M Long PCC Pole (Double Pole Structure)

11 mtr. Long STP round Pole. (Double Pole Structure)

13M Long STP, SP-72 Round Pole (Double Pole Structure)

9M Long PCC Pole (Tri Pole Structure)

11M Long STP, SP-55 Round Pole (Tri Pole Structure)

13M Long STP, SP-72 (Tri Pole Structure)

9M Long PCC Pole (Four Pole Structures)

11 mtr. Long STP round Pole. (Four Pole Structure)

13M Long STP, SP-72 Round Pole (Four Pole Structures)

Grouting of supports in CC 1:4:8 (Cement, sand & 40mm brick ballast). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grit) with muffing as per Respo Norms including providing of requried material. Work includes back filling and proper ramming. (For S. No- 6.01 to 6.12) 6.01- 9M Long PCC Pole (Single Pole)

11 mtr. Long STP round Pole. (Single Pole)

13M Long STP, SP-72 Round Pole (Single Pole)

9M Long PCC Pole (Double Pole Structure)

11 mtr. Long STP round Pole. (Double Pole Structure)

13M Long STP, SP-72 Round Pole (Double Pole Structure)

9M Long PCC Pole (Tri Pole Structure)

11M Long STP, SP-55 Round Pole (Tri Pole Structure)

13M Long STP, SP-72 (Tri Pole Structure)

9M Long PCC Pole (Four Pole Structures)

11 mtr. Long STP round Pole. (Four Pole Structure)

13M Long STP, SP-72 Round Pole (Four Pole Structure)

Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per respo norms including providing of requried material. Including back filling of soil and proper ramming etc.

Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per respo norms, including fixing of Stay Insulators of 33KV including providing of stay insulator and stay clamps, nut & bolts, etc.

Earthing of supports with M.S. earth Rod of (20x2500)mm long including excavation of pit and driving M.S.Rod 3.0M apart from suppor and 0.5M below the ground level and connecting belowl the earth electrodes with the help of G.I.wire No.8SWG and including providing & fixing of earthing lugs.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with Line chart including binding and fixing of all accessories in 03Nos. Conductor in parallel.

Providing of P.G.Clamps of proper sizes at all section poles, suitable for Dog Conductor as per respo norms. ( For S. No - 11.01 to 11.03) 11.01- Sectional Double Pole

Sectional Tri Pole

Sectional Four Pole

Making Jumpers on Section Points, by fixing of P.G.Clamps of proper sizes, suitable for Dog Conductor as per respo norms. ( For S. No .12.01 to 12.03) 12.01- Sectional Double Pole

Sectional Tri Pole

Sectional Four Pole

Guarding between two poles like single poles, double poles, Tri pole, four poles, etc. to guard L.T., 11KV Line telephone and river crossing, road crossing etc. with G.I.wire No.6SWG and G.I.wire No.8SWG, including cutting with fabrication and fixing of guarding angle, including providing of requried clamps, nut & bolts, eye bolts etc, as per Respo Norms.

Providing of danger board at each location as per specification of the respo norms.

Fixing of danger board at each location as per specification of the respo norms.

Providing of Number Plate at each location as per specification of the respo norms.

Fixing of Number Plate at each location as per specification of the respo norms.

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.

Making H.T.Connection of the proposed line from 132KV S/S Kudarki Distt-Moradabad. The work consists of fixing & fabrication of Dropper Channels, & fixing of Disc Insulators, Pin Insulators, jumpering with providing & fixing of P.G.Clamps, clamping and binding etc,as per site conditions.

Providing of barbed wire on 33KV SP-72/SP-55 ST Poles/PCC Poles, as anti-climbing device for a length of 0.9Mtr.

Wrapping of barbed wire on 33KV SP-72/SP-55 ST Poles/PCC Poles, as anti-climbing device for a length of 0.9Mtr. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75Mtr. from the ground, complete with providing & fixing of lower end & upper end clamps, made of M.S.Flat 40x5mm complete with nuts & bolts as per respo norms.

Painting of following supports/structures of 33KVLine, with two coats of synthetic enamel aluminium paint after one coat of ready mix primer, including provididng of all material (red oxicide and Aluminium paint), as well as rubbing/cleaning of surface as required for proper completion of work . (For S. No-22.01 to 22.08) 22.01- Double Pole Supports (11Mtr SP-55 Poles including all channels/x-arms/clamps etc)

Tri Pole Supports (11Mtr SP-55 Poles including all channels/x-arms/clamps etc)

Four Pole Supports (11Mtr SP-55 Poles including all channels/x-arms/clamps etc)

Single Supports (11Mtr SP-55 Poles including all channels/x-arms/clamps etc)

Double Pole Supports (13Mtr SP-72 Poles including all channels/x-arms/clamps etc)

Single Supports (13Mtr SP-72 Poles including all channels/x-arms/clamps etc)

Tri Pole Supports (13Mtr SP-72 Poles including all channels/x-arms/clamps etc)

Four Pole Supports (13Mtr SP-72 Poles including all channels/x-arms/clamps etc)

Safely laying of 02No., 3x300Sq.mm. XLPE Cable in cable trench, between one Double pole to other side of Double Pole.

Laying of Ist Class Bricks, along the length on both side of 2 Nos 33KV XLPE Cable in Cable Trench (minimum 25No. Bricks/Mtr per Cable) and Stone Slab of size 450x600x50mm, on top of the each Cable, including providing &filling River Sand inside the Bricks.

Back filling of excavated earth in the cable trench upto the ground level and ramming properly.

Providing 150mm dia 3Mtr long G.I.Pipe with requried clamp over 33KV, 3x300Sq.mm. XLPE cable.

Fixing 150mm dia 3Mtr long G.I.Pipe over 33KV, 3x300Sq.mm. XLPE cable before mounting the 4Nos. cable on double pole. Work includes fixing of clamp, sealing of top and bottom end of the G.I.Pipe. One end of G.I.Pipe is to be buried under earth about 500mm as per respo norms.

Making of 33KV outdoor type heat shrinkable XLPE Cable jointing Kits and crimping of proper size aluminium lugs. Work includes providing insulating tapes etc. as per specifications.

Laying of 3x300Sq.mm XLPE cable in the air and mounting and clamping 4Nos.33KV XLPE boxes on double pole structure and making connection with 33KV overhead lines at both ends.

Fixing of "cable route marker" along the route of 33KV cable at both ends of railway crossing.

Cosmic Enterprises