REPAIR AND RECANNING TO WOODEN CHAIR OF SORTS WOODEN FURNITURE OF OTM ACCN OFFRS JCOS ORS MD ACCN AND BSO YARD UNDER GE NORTH BANGALORE

Amount

Table 3' x 3' (900 x 900 x760 mm)(FD-291) Supply and fixing the following new parts of the table after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both side of size 900 x 900 x 18mm thick with 4 mm thick half round teak wood beading alround.

As per item No 1 above but for Side / Front frame rail.

As per item No 1 above but for Legs

As per item No 1 above but for S & F Second class hard wood corner / bracket (L shape) of size 100x100 x 25 mm thick and fitted with screw between long rail to legs, short rail to legs.

Table 3' x 2' (900 x 600 x 760 mm) with drawer and without drawer FD-283 & FD-284 Supply and fixing the following new parts of the table after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both side of size 900 x 600 x 18mm thick with 4 mm thick half round teak wood beading alround.

As per item No 5 above but for Long rail

As per item No 5 above but for Short rail

As per item No 5 above but for Legs

As per item No 5 above but for Short / Long Stiffeners

As per item No 5 above but for S & F Second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.

As per item No 5 above but for Drawers complete as per drg

Table Centre (900 x 450 mm) (FD-274) Supply and fixing the following new parts of the table after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both side of size 900 x 450 x 18mm thick with 4 mm thick half round teak wood beading alround.

As per item No 12 above but for Front and back rail

As per item No 12 above but for Side rail

As per item No 12 above but for Legs

As per item No 12 above but for Short / Long stiffeners

As per item No 12 above but for S & F Second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.

Peg Table (450 x 300 mm)(FD-277) Supply and fixing the following new parts of the table after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both side of size 450 x 300 x 18mm thick with 4 mm thick half round teak wood beading alround.

As per item No 18 above but for Front and back rail

As per item No 18 above but for Short rail

As per item No 18 above but for Legs

As per item No 18 above but for Short / Long stiffeners

As per item No 18 above but for S & F Second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.

Table Dinning 06 Persons (1500 x 900 mm) (FD-273) Supply and fixing the following new parts of the table after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only complete all as specified in drawing directed by Engr-in-Charge. Table top new made of pre laminated particle board (exterior grade ) with teak face both side of size 1500 x 900 x 18mm thick with 04 mm thick half round teak wood beading shall be provided all round.

As per item No 24 above but for Front and back rail

As per item No 24 above but for Side rail

As per item No 24 above but for Legs

As per item No 24 above but for Stiffeners

As per item No 24 above but for S & F Second class hard wood corner / bracket (L shape) of size 150 x 150 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.

Table Dinning 08 persons (1800 x 900 mm) (FD-273) Supply and fixing the following new parts of the table after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both side of size 1800 x 900 x 18mm thick with 4 mm thick half round teak wood beading alround.

As per item No 30 above but for Front and back rail

As per item No 30 above but for Side rail

As per item No 30 above but for Legs

As per item No 30 above but for Top centre stiffeners of size 100 x 25mm

As per item No 30 above but for S & F Second class hard wood corner / bracket (L shape) of size 150 x 150 x 25 mm thick and fitted with screw between long rail to legs, short rail to legs.

Table Dinning (1200 x 900 x760mm) FD/MAP-II/03 Supply and fixing the following new parts of the table after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both sides of size 1200 x 900 x 18mm thick with 4 mm thick half round teak wood beading alround.

As per item No 36 above but for Front and back rail

As per item No 36 above but for Short / side rail

As per item No 36 above but for Legs

As per item No 36 above but for S & F Second class hard wood corner / bracket (L shape) of size 150 x 150 x 35 mm thick and fitted with screw between long rail to legs short rail to legs.

Teapoy Wooden (600 x 450mm) FD-278 Supply and fixing the following new parts of the table after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both side of size 600 x 450 x 18mm thick with 4 mm thick half round teak wood beading alround.

As per item No 41 above but for Front and back rail

As per item No 41 above but for Short / side rail

As per item No 41 above but for Legs

As per item No 41 above but for Short / long stiffeners

As per item No 41 above but for S & F Second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.

Table Writing FD- 275 Supply and fixing the following new parts of the table after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both sides of size 1145 x 600 x 18mm thick with 4 mm thick half round teak wood beading alround.

As per item No 47 above but for Front and Back Rail

As per item No 47 above but for Side rail

As per item No 47 above but for Legs

As per item No 47 above but for Short & Long Stiffner

As per item No 47 above but for Drawers of table as per drawing.

As per item No 47 above but for Cabinet Shutter/Door of table of size of 570mm x 405mm made out of 18mm thick prelaminated particle board (Exterior Grade) with teak wood beading shall be provided all round including continuous piano hinges 40mm wide upto Shutter height with screw.

As per item No 47 above but for Cabinet Sides of table made out of 18mm thick prelaminated particle board (Exterior Grade) duly fixed by screw.

As per item No 47 above but for Cabinet Back side of table made out of 6mm thick plywood to be fixed as per drawing.

As per item No 47 above but for Aluminium anodized knob 25mm of best quality.

As per item No 47 above but for Lock shall be of brass multipurpose 4 lever with duplicate key size 40 mm as shown in drg.

As per item No 47 above but for S & F Second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs, short rail to legs.

Table Dressing Ladies with Mirror FD-378 Supply and fixing the following new parts of the table after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only complete all as specified in drawing and as directed by Engr-in-Charge. 5mm thick looking mirror for table dressing ladies fixed to the frame complete.

As per item No 59 above but for 5mm sheet glass of shutter size 280 X 265 mm including sliding wheel complete.

As per item No 59 above but for Plywood, 12mm thick, commercial on back side of the table complete.

As per item No 59 above but for Ply wood 4mm thick back side of the mirror complete.

As per item No 59 above but for New knobs aluminium anodized 25 mm dia to be fixed with appropriate size of screw wood to drawer and shutter of Cup Board.

As per item No 59 above but for Table top fabricated out of pre laminated particle board with teak veneers on one side and other side white 18/19 mm thick fixed to timber framework with screws complete.

As per item No 59 above but for New drawer of dressing table as per drawing.

Table Dressing Gents with Mirror FD-379 Supply and fixing the following new parts of the table after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only complete all as specified in drawing and as directed by Engr-in-Charge. Dressing table top or bottom fabricated out of pre-laminated particle board with teak veneers both side 18 mm thick fixed to timber frame work with screws complete all as shown on drawings.

As per item No 66 above but for Side rail fabricated out of pre-laminated particle board with teak veneers both side size of 18 mm thick fixed to frame work with screws complete all as shown on drawings.

As per item No 66 above but for Plywood, 12 mm thick, commercial on back side of the table complete all as shown on drawings.

As per item No 66 above but for Aluminum anodized knob 25 mm of best quality.

As per item No 66 above but for Looking mirror 5.0 mm thick fixed to the frame of table dressing gents complete all as shown on drawings.

As per item No 66 above but for Table Drawers fabricated out of pre-laminated particle board 12mm thick for front side, 12mm thick plywood for side & back and 6mm thick plywood for bottom complete all as shown on drawings.

Chair Dining FD-279 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw /bomboo pins and other members of the chair dining complete and all as specified and Shown on drg. Rear leg

As per item No 72 above but for Front leg

As per item No 72 above but for Seat frame front rail

As per item No 72 above but for Back rest

As per item No 72 above but for Seat frame Side rail

As per item No 72 above but for Seat frame Rear rail

As per item No 72 above but for Stiffener

Chair Dinning JCO/OR MAP FD/MAP-II/05 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw/bomboo pins and other members of the chair dining JCO/OR MAP complete and all as specified and shown on drg. Rear leg

As per item No 79 above but for Front leg

As per item No 79 above but for Seat frame front/rear rail

As per item No 79 above but for Back rest

As per item No 79 above but for Seat fram Side rail

As per item No 79 above but for Stiffener

As per item No 79 above but for Taking down Unsv PVC seat from chair of shorts and refixing with best quality new PVC seat 4mm thick including holes & screwed with rail all as per drg.

Chair wooden bottom FD -285 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw/bamboo pins and other members of the chair wooden bottom complete and all as specified and shown on drg. Rear leg

As per item No 86 above but for Front leg

As per item No 86 above but for Seat frame front / back rail

As per item No 86 above but for Seat frame side rail

As per item No 86 above but for Stiffener

As per item No 86 above but for Seat of 6mm thick plywood one side teak face of BWR grade fixed with screw.

Chair Writing FD-280 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw/bamboo pins and other members of the chair writing complete and all as specified and shwon on drg. Rear leg

As per item No 92 above but for Front leg

As per item No 92 above but for Arms rest

As per item No 92 above but for Stiffener

As per item No 92 above but for Seat frame side rail

As per item No 92 above but for Seat frame Front/Back rail

Chair Easy FD-229 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw/bamboo pins and other members of the chair easy complete and all as specified and shown on drg. Front leg

As per item No 98 above but for Rear leg

As per item No 98 above but for Front seat rail

As per item No 98 above but for Back seat rail

As per item No 98 above but for Seat frame side rail

As per item No 98 above but for Top rail of back frame

As per item No 98 above but for Bottom rail of back frame

As per item No 98 above but for Side rail of back frame

As per item No 98 above but for Arms rest

Removing of old unserviceable plastic cane from all sorts of chairs i.e chair dining, chair writing and chair easy etc (except chair verandah) including recaning with new cane of white colour of size 3 mm wide and 0.60 mm thick (flat) alround for border of seat and back and 2 mm wide and 0.40 mm thick half round for remaining portion, complete all as specified and as directed by Engineer-in-Charge. Chiar dining (FD-279)

As per item No 107 above but for Chair Writing (FD - 280)

As per item No 107 above but for Chair Easy (FD - 229)

Bed Hard Plytop (FD-246) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and directed by Engr-in-Charge. Plywood top 12mm thick of size bed hard complete 1830 x 900 mm. (BWR) as per IS-303 (07 ply).

As per item No 110 above but for Long rail of teak wood of size 100mm x 50mm x 1980mm.

As per item No 110 above but for Short rail of teak wood of size and shape as per drg.

As per item No 110 above but for Centre Stiffner

As per item No 110 above but for Ply wood 4mm thick teak faced to the direct vision of head rest and ply wood commercial 4 mm thick to other side including 12mm thick half round cut teak wood beading alround.

As per item No 114 above but for Foot rest.

As per item No 110 above but for Head board frame complete with legs 12mm dia half cut round teakwood beading.

As per item No 116 above but for Foot board frame with legs

As per item No 116 above but for Leg to head rest side of bed.

As per item No 116 above but for Leg to foot rest side of bed.

Side Board FD-372 Supply and fixing the following new parts after removing broken parts including tightening with screw/nails other members of the side board complete and all as specified and shown on drg. Shutter made out of prelaminated particle board exterior grade size of 357mm x 435mm x 18mm thick including 4 mm thick teak wood beading all around fixed with continuous piano type hinge 40mm wide.

As per item No 120 above but for Drawers made out of prelaminated teak faced and pre laminated particle board as shown on drg.

As per item No 120 above but for Aluminium anodized knob 25mm of best quality.

As per item No 120 above but for Top / Bottom of side board made out of pre laminated particle board of 18mm.

As per item No 120 above but for Sides of side board made out of prelaminated particle board of 18mm.

As per item No 120 above but for Front and rear leg including long and side rail frame fabricated out of teak wood all as per shown on drg.

As per item No 120 above but for Plywood 12mm thick commercial on back side of the side board.

Table Bed side FD-276 Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the table bed side complete and all as specified and shwon on drg. 18mm thick pre-laminated particle board side runner including legs of table with 4mm thick teak wood beading alround.

As per item No 127 above but for 18mm thick pre-laminated particle board top side of the table made out of teak faced with 4mm thick teak wood beading alround. .

As per item No 127 above but for 18mm thick pre-laminated particle board shelves with bottom self of the table made out of teak faced.

As per item No 127 above but for Plywood 4mm thick commercial on back side of the table bed side .

Hat stand with Mirror FD-233 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw and other members of the Hat stand with mirror complete and all as specified and shown on drg. Mirror with new mirror 5 mm thick.

As per item No 131 above but for Aluminium hook

As per item No 131 above but for Edging

As per item No 131 above but for Front side made out of 4 mm thick ISI marked one side teak face veneer plywood.

As per item No 131 above but for Back made out of 6mm thick ISI marked Plywood commercial.

Notice Board FD-99 Removing the old u/s soft board baize green cloth and wooden frame of notice board and S&F new baize green cloth and soft bd, frame including finishing of wooden surfaces with french polish complete of the following size. Notice board of size 1500 mm x 1200 mm

As per item No 136 above but for size 1800 mm x 1200 mm

As per item No 136 above but for Size 900 mm x 600 mm

As per item No 136 above but for Size 1500 mm x 900 mm

As per item No 140 above but for Size 1800 mm x 1200 mm

As per item No 140 above but for Size 900 mm x 600 mm

As per item No 140 above but for Size 1500 mm x 900 mm

TV Trolley FD/E6/MAP/04(R ) Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the TV Trolley complete and all as specified and shown on drg. Replacement of side or bottom or top frame made out of pre-laminated particle board in existing TV Trolley after replacement of old UNSV side bottom and top frame

As per item No 144 above but for Provision of aluminium anodized channel in exsting TV Trolley to slide the glass after taking out of UNSV Glass door.

As per item No 144 above but for Replacement of Glass shutter in two pieces 5 mm thick along with sliding wheel for smooth function of glass shutter drawers in existing TV Trolley as shown on Drawing and directed by Engtr-in-charge.

As per item No 144 above but for Replacement of castor wheel of existing TV Trolley as shown on drawing and directed by engr-in-charge.

Bin Linen Multipurpose FD/E6/MAP/09 Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the Bin solid multi purpose complete and all as specified and shown on drg. 18mm thick pre-laminated particle board top of existing bin soiled linen multi purpose of shape and size shown on drawing including 4mm thick teak wood beading all around.

As per item No 148 above but for 18mm thick pre-laminated particle board bottom of existing bin soiled linen multi purpose of shape and size shown on drawing including 4mm thick teak wood beading all around.

As per item No 148 above but for 18mm thick pre-laminated particle board side of existing bin soiled linen multi purpose of shape and size shown on drawing including 4mm thick teak wood beading all around.

As per item No 148 above but for 18mm thick pre-laminated particle board drawers of existing bin soiled linen multi purpose of shape and size shown on drawing including 4mm thick teak wood beading all around.

As per item No 148 above but for 18mm thick pre-laminated particle board shutter of existing bin soiled linen multi purpose of shape and size shown on drawing including 4mm thick teak wood beading all around.

As per item No 148 above but for Chromium plated handle fancy type 100mm as per sample.

As per item No 148 above but for Plywood 12mm thick commercial on back side of the Bin soiled linen multi purpose including teak wood legs frame.

Table Dressing Ladies with Mirror (MAP) FD/MAP/II/07 Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the table complete all as specified in drawing and directed by Engr-in-Charge. Removing the existing unserviceable broken mirror and S&F new mirror 5.5mm of thick size 1250x440mm all as specified and shown on drawings

As per item No 155 above but for Removing the existing unserviceable frame of mirror and S&F new 1st class teak wood frame of size 45x35 mm and replace the worn out ply wood with 6mm plywood BWR Grade complete all as specified and shown on drawings

As per item No 155 above but for Replacement of unserviceable 18/19 mm thick shutter with suitable paino type hinges of existing size fabricated out of pre laminated particle board with teak veneers on one side and other side white.

As per item No 155 above but for Replacement of old unserviceable plywood, 12mm thick, commercial on back side of the table complete.

As per item No 155 above but for Replacement of old unserviceable ply wood 4mm thick back side of the mirror complete.

As per item No 155 above but for Supply and fix new knobs shall be anodized 25 mm dia to be fixed with appropriate size of screw wood to drawer and shutter complete.

As per item No 155 above but for Replacement of old unserviceable top fabricated out of pre laminated particle board with teak veneers on one side and other side white 18/19 mm thick fixed to timber framework with screws complete.

As per item No 155 above but for Replacement of old unserviceable drawer with new drawer all as per drawing.

Dressing Mirror Gents (MAP) FD/E6/MAP/16 Removing old unserviceable parts and S & F new parts as size and shape including polishing complete all specified all shown on drawing. Mirror 5.5MM thick with back side ply and teak wood beading, make of Mirror modiguard / atul / swastik.

As per item No 163 above but for Side runner made of 18MM thick pre laminated MDF board (exterior grade).

As per item No 163 above but for TOP & bottom runner made of 18MM thick pre laminated MDF board (exterior grade).

As per item No 163 above but for Back side ply 12MM thick BWR as per IS 303 (7 Ply).

As per item No 163 above but for Glass shelf 4mm thick size as per existing.

CHAIR VERANDAH (FD- 256) Taking down unserviceable cane from chair verandah and re-caning with best quality new plastic cane of 3.50 mm/ 4 mm wide plastic cane as per pattern including applying one coat of white synthetic enamel paint of superior quality to chairs as per drawings all as specified and as directed by Engineer-in-Charge

As per item No 168 above but for Continuous welding 20mm dia MS tube at hand rest frame joint, seat frame joint, back frame joint and seat to back frame stiffener joint of chair verandah all as per drawing duly painting the affected portion with two coats of synthetic enamel paint(White) over a coat of red oxide primer all as specified and as directed by Engineer-in-Charge

As per item No 168 above but for Provision of PVC bush hard of white colour approved make, fixed to legs of chair varandah including taking down old one as per drawing all as specified and as directed by Engineer-in-Charge.

FD-246 Preparation of wood and wood based surfaces after removing stains through sand papering and rectifying the cracks by filling with beewax, rawsin and chalk powder etc, mixed with polish and applying french polish to achieve uniform texture and glossy finish to the following furniture :- Bed with plywood top

As per item No 171 above but for Chair dining (FD-279)

As per item No 171 above but for Chair dining MAP JCO'S/OR (FD/MAP-II/05)

As per item No 171 above but for Chair Easy (FD-229)

As per item No 171 above but for Chair WBB (FD-285)

As per item No 171 above but for Chair writing (FD-280)

As per item No 171 above but for Hat stand with mirror (FD-233)

As per item No 171 above but for Peg Table (FD-277)

As per item No 171 above but for Table Bed side (FD-276)

As per item No 171 above but for Table 3' x 2' with and without drawer (FD-283 / 284)

As per item No 171 above but for Table centre (FD-274)

As per item No 171 above but for Table dining 6/8 pers (FD-273)

As per item No 171 above but for Table dressing gents with mirror (FD-379)

As per item No 171 above but for Table dressing gents with mirror (FD/E6/MAP/16)

As per item No 171 above but for Table writing (FD-275)

As per item No 171 above but for Table dressing ladies with mirror (FD-378)

As per item No 171 above but for Table dressing ladies with mirror MAP (FD/MAP/II/07)

As per item No 171 above but for Teapoy (FD-278)

As per item No 171 above but for Table Dining 1200 x 900mm (FD/MAP-II-03)

As per item No 171 above but for Book Case / shelf (FD-237)

As per item No 171 above but for Side board (FD-372)

As per item No 171 above but for Bin Linen Multipurpose (FD/E6/MAP/09)

As per item No 171 above but for TV Trolley (FD/E6/MAP/04(R))

As per item No 171 above but for Notice board all type (FD-99)

As per item No 171 above but for Table 900 x 900mm (FD-291)

As per item No 171 above but for Chair dinning long back cushioned (FD-357)

As per item No 171 above but for Chair Easy cushioned (FD-358)

As per item No 171 above but for Stool Dressing with cushioned (FD/E6/MAP/14)

As per item No 171 above but for Chair dinning MAP Officer (FD/MAP-II/04)

JAIHIND ENTERPRISES (BID ID -3298601)

SARGAM ENTERPRISES (BID ID -3297595)

Global Furnisherts (BID ID -3296676)

SKR ENTERPRISES (BID ID -3295745)

REENA INDUSTRIES (BID ID -3297669)

Ms GHOSH AND SONS (BID ID -3295628)

PRIYADARSHINI CONSTRUCTIONS (BID ID -3298174)

Mavee Syndicate (BID ID -3298281)

Bidder Name

SHANMUGA TRADERS