SPECIAL REPAIR TO PATHWAY AT AFCAO MAIN BUILDING TO UNIT

Amount

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed by Engr In Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar up to four storey height bldg complete all as specified and directed by Engr In Charge.

M&L for factory made precast PCC kerb stone of size 30cmx15cmx30cm/30cmx15cmx45cm manufactured by M-30 grade of concrete fixed on 75mm thick PCC (1:2:4) using 20mm graded stone aggregate, jointed with cement mortar (1:4) including necessary excavation ,returning filling and two coat of weather coat over 3mm thick wall care putty incld dismantling of existing kerb stone complete etc .

Taking down cement or cement lime plaster any description on any walls etc including racking out joints, hacking for key scrubbing down with water etc up to four storey height bldg and and removing the debries outside the MOD land complete all as specified and directed by Engr-in-Charge.

M&L for rendering CM (1:6) 15mm thick on other than fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement up to four storey height bldg icomplete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M & L for reinforced cement concrete M-25 using 20mm graded stone aggregate as in chajjas and the like complete all as specified and directed by Engr-In-Charge.

M & L for formwork to chullah hoods, chajjas, slab, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed by Engr-In-Charge.

S& F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia complete all as specified.

All as per item No 09 above but 6 to 8mm dia, as in stirrups, spacers and binders complete all as specified and directed by Engr In Charge.

Supply only liquid water proofing compund only complete all as specified and directed by Engr In Charge.

M&L for Chequered cement concrete coloured tiles (300x300) 20-25 mm thick confirming to IS-1237 (rubber moulded) in floor sect, set, jointed and pointed in neat cement slurry 15mm thick bedding layer of cement sand mortar (1:6) including dismantling complete all as specified and directed by Engineer-in-Charge.

S&F precast machine pressed PCC interlocking paver block of 80 mm thickness, M-40 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved including dismantling complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes including demolition complete all as specified and directed by Engr In Charge.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of primer incl 3mm thick elastomeric wall care putty on walls complete and specified and as directed by engr-in -charge.

M&L for preparation on new or previously untreated wall surfaces and applying Two coat of exterior emulsion paint over a coat or primer any tint (colour as approved by GE) over 3mm wall care putty including preparation of surface of wall up to four stories complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, nexc 1.5m wide and n.exc 1.5m depth for fdn etc or for shafts n.exc 10 sqm on plan in any type of soil/rock complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, leveling watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-charge.

Removing excavated materials n.exc 50M and deposting where directed at a level n.exc 1.5M above the starting point complete all as specified and directed by Engr-in-charge.

M&L for Salt glazed stoneware drain pipes 150mm bore laid in trenches and jointed as specified

M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 150mm bore pipe all as specified.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded agg) as in foundation filling and mass concrete, complete

M & L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed aggregate) as in copings, benching including weathering, slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete and specified and as directed by engr-in -charge.

Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone agg) as in manhole covers set in cement motar 1:6 all as specified and directed including necessary formwork and moulds all as specified.

Dismantling stone slab and granite of any description or thickness in floors etc and removing the debries outside the MOD land complete all as specified and directed by Engineer-in-Charge.

M & L 15 mm thick screed bed or bedding layer of cement mortar (1:4), for laying of granite complete all as specified and directed by Engr In Charge.

M&L pure black Granite (of any type) tiles 20mm (+-2mm) thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including moulded ofnedges grinding and polishing with 100mm (1:4:8 PCC) complete all as specified and directed by Engr-in-Charge.

M & L for 75 mm thick cement concrete 1:3:6 type C2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form wrok to divide the area in panels finishing exposed edges fair or rounding or chamfering where directed and providing 6mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed by Engr In Charge.

Taking out of APP modified water proofing membrane including mud puska complete on roof surface and surface properly cleaned by wire brush Including removing of all demolished material from out of MOD land complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. (e) Including taking down of existing roof treatment in any description i.e. mud faska, bricks tiles, APP etc. (g) including 15mm screed bed / plaster in CM (1:4) Note:- This treatement shall be done by the approved authorized applicators and guarantte of treatement shall be for 10 years. Complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:2:4 type B1 using 20mm graded aggregate mixed with water proofing compound as per manufacturer instructions laid as in padding over roof slabs for providing proper slope to the concrete padding, surface finished even and smooth without using extra cement up to four stories complete all as specified.

M&L for cement contrete tiles 20cmX20CMX20MM thick with grey cement and no pigment machine pressed; set jointed and pointed in neat cement slurry in floors and cut and polished completed all as specified and directed by Engr-In-Charge.

M & L 20 mm thick screed bed or bedding layer of cement mortar (1:4), for laying of cement tiles on roof complete all as specified and directed by Engr In Charge.

M&L for wall tiles 350mX250mmX7 to 8mm or 350X 450X 7mm to 8mm thick on vertical surface, jointed in neat cement slurry and pointed in white or colour cement to match with tiles incl back plaster 10 mm thick in cm 1:4 with WPC including dismantling complete all as specified and directed by Engr In Charge.

Material and labour for false ceilings using GI sanp grid system with rool-formed out of hot drip galvanised steel capings (Powder coated) main runner 38x24mm, cross Tee 29x24mm and wall angle 24x24mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board, prepainted cement fibre board size 595x595x4mm thick any texture (Lake, Hill, ocean cascade or Electra ) suspended from RCC roof/ structural members of soofits with angle cleat cut out etc to their equired line and shape as per manufactureres recommndations at any height including dismenling complete all as specified and as directed by Engr-in-Charge.

M&L for Providing, cement concrete louvres and jallies, 35mm thick Type B0 1:2:4 (12.5mm stone aggregate) set in CM 1:4 (measured soild), including all mould-ings but excluding frame (Pre cast frame shall be measured and paid separately.

S&F pre painted galvalume aluminium zinc coating GI based plain or corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specification including dismantling complete all as specified and directed by Engr In Charge.

S & F of rolled mild steel sections as in main and cross beams, hip and jack rafter, purlins where connected to common rafters, running rails, grills, gate, drain cover, guides for sliding doors fixed with angle cleat and other connecting plates conforming to Fe-290 Grade E-165 including dismantling complete all as specified and directed.

M&L for guiniting work to RCC work in coloumn, chajjas, balconies, slabs, landings etc by removing loose, concrete, incl removing rust with short blasting and cleaning of surface with wire brush and applying epoxy treatment to rusted reinforcement and including S&F welded wire mess fabric or wire not less than 95x95x3mm adhesive plaster grade for concrete admixture and providing guniting pressure 2.00/2.50 Kg/Sq cm with admixture 1 part of cement and 3.50 part of sand and thickness 50mm average and making the surface even and smooth including necessary formwork and 10mm thick with CM 1:4 plaster over repaired surface with WPC complete all as specified and directed by Engr-in-Charge.

M & L for complete removing existing treatment, old decorated surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. including cornices, pilasters etc. (Plastered or unplastered surfaces) and applying two coats of exterior plastic emulsion paint (Coloured as directed by EIC), over 2mm thick wall care putty , complete all as per manufacturers instructions and as directed by Engineer-in-Charge.

M&L for preparation of existing treatment old surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance 1st quality exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces including change of existing colour if required complete all as specified and as directed by Engineer-in-Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-In-Charge.

M&L for glazed ceramic coloured/white (As decided by EIC) tiles of size 350 x 250 x 7mm/450 x 350 x 7mm/450X300X7mm thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-In-Charge.

M&L for vitrified ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge.

All as per item No 45 above but in dado/Skirting over 10mm thick rendering in CM 1:4 complete all as specified and directed by Engr-In-Charge.

M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish complete all as specifed and directed.

M&L for 16-18mm thick Granite slab (Z Black or as decided by EIC) on top of cooking platforms, bar counter, anti skid ramp and similar work including cutting polishing rounding on edge etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in CM 1:4. including grinding and polishing complete all as specified and directed by Engr-In-Charge.

M&L for 16-18mm thick Granite ((Z Black or as decided by EIC)) work (table rubbed and polished) for wall lining (veneering to wall with any height) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting polishing rounding on edge etc machine cut, bedded, jointed with grey cement slurry, pointed with white cement with admixture of pigment to match the shade of granite stone and holding with brass screw complete all as specified and directed by Engr-In-Charge.

S/F in repairs 15 mm Stop/angle valves ,fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as per spd and directed by Engr-in-Charge.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re- fixing or removal to store complete all as spd and directed by Engr-in-Charge.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re- fixing or removal to store complete all as spd and directed by Engr-in-Charge.

S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as spd and directed by Engr-in-charge.

S&F 20mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as spd and directed by Engr-in-charge.

S&F in repair 110mm bore PVC (SWR) pipe single cocketed any length with rubber ring joints fixed to wall Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, wall cutting, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified.

S&F in repair 75mm bore PVC (SWR) pipe single cocketed any length with rubber ring joints fixed to wall Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified.

S&F in repair PVC connection of 60 cm long with 2 Nos PTMT side nuts screwed with iron pipe of 15 mm dia complete all as specified and as directed.

Supply & Fixing of 18mm thick PVC/WPC (Denasity not less than 600kg/cum) ply of Plain color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer ‐ in ‐charge.

Supply & Fixing of 18mm thick PVC/WPC (Denasity not less than 600kg/cum) ply of one side Prelam/Rigidlam and other side balancing laminate colour to make kitchen cabinet Shutter/ drawer Front shutters complete as per specifications and as directed by the engineer ‐ in ‐ charge.

Supply & Fixing of 12mm thick PVC/WPC (Denasity not less than 600kg/cum) ply of plain white colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by the engineer ‐ in ‐charge.

Supply & Fixing of 6 mm thick PVC/WPC (Denasity not less than 600kg/cum) ply of plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet back covering and pull out drawer base complete as per specifications and as directed by the engineer ‐ in ‐charge.

Supply & Fixing for 20mm wide & 1mm thick PVC EDGE BENDING of PVC pasted on edges with suitable adhesive, complete all as specified and directed.

Supply & Fixing of paino hinges for kitchen cabinet shutters,complete all as specified and directed.

Supply & Fixing of Magnetic catch for kitchen cabinet shutters,complete all as specified and directed.

Supply & Fixing of Ball bearing runners 45 mm Telescopic Channel ( 20 Inch ) full extension load capacity 50 kgs.

Supply & Fixing of stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and directed.

Supply & Fixing of chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 486 x 500 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer‐ in – charge.

Supply & Fixing of chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer‐ in – charge.

Supply & Fixing of chrome plated stainless steel wire basket (storage / Plain basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete in all respect as specifiedand as directed by engineer‐ in – charge.

S&F for sink with double bowl made of stainless steel 1mm thick kitchen or laboratory with plugs washers and waste incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connectings union to pipe overall size 950mmx510mm, bowl size 460mmx460mmx230mm complete all as per specified and directed.

S&F glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-In-Charge.

Providing reinforce cement concrete type B1 1:2:4(20mm graded aggregate) set in 1:4 cement mortar in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, including chamfers, weathering's, throating etc. and setting in mortar complete with joints to match including the use of forms, moulds or machine moulds and setting the blocks, slabs, etc. complete including raking back the joints of the internal faces (at least 10 mm) for pointing as the work proceeds or finishing with neat flush joints complete all as specified and directed by Engr-in-Charge.

M & L for brick work with sub-class `B' bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 complete all as specified and directed.

S&F in 100mm dia PVC (SWR) floor trap/ nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed

S&F steel/work in tubular truses, purlins, rafters, struts, vertical members and similar work including special shape washers complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 grade St-240

Eexcavation in post holes ( or similar holes) in any type of soil each n.exc. 0.5 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete all as specified and directed by engr in charge

M&L for Applying two coats of synthetic enamel paint on steel & iron surfaces of any description , not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome primer complete all as directed by engr in charge

Cutting opening through brick wall built in cement mortar or cement lime mortar for door, window and other opening or enlarging existing openings, converting window into doors openings or cutting out defective brick work for under pinning, including providing fixing and removing shoring, cleaning and stacking bricks removing surplus serviceable bricks, hard core etc to store and rubbish not exec 50m complete all as specified

M&L for providing reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate) in precast posts, fencing posts, struts etc, for fencing, average sectional area exc 250 Sq. cm and n.exc 400 Sq. Cm , wth or without chamfered angles and flat, splayed, rounded or mitred tops as specified and directed by Engr-in-charge.

M&L for rendering CM (1:4) 15 mm thick on fair face of brick work or concrete surfaces using water proofing compound @ 2% of weight of cement as per manufactureres on brick surfaces or concrete surfaces even and smooth without using extra cement. (Note : WPC shall be measured & paid separatelly)

Dismantling of ceiling /wall panelling including frame work and board complete all as specified and directed by Engr-in-Charge.

M &L for PVC profile for wall panelling colour / shade as approved size 250mm wide, 08 mm over all thick with 1 mm wall thickness fixed with screw to mild steel square ( size 20mmx 20mmx 1mm thick) tubler frame work including one coat of red oxide primer, fixed to walls complete all as specified and directed by Engr-in-Charge.

M&L for PVC profile corner beading L/T type for wall panelling, colour/shade matching with wall panelling complete all as specified and directed by Engineer-in-Charge.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided and removing the debries outside the MOD landcomplete all as specified and directed..

M&L for 75mm thk cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in flooring, steps, jambs, pillars, win- dow-cills, cooking plat- forms and like in cement mortar (1:4) including point- ing in white cement (1:2) us- ing marble dust with admix- ture of pigment to match with shade of granite and incl chamfeirng/rounding the edges complete all as spd and as directed (Colour and design approved by GE).

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not xceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) over 100mm thick plain cement concrete, type D-2, 1:4:8, complete all as specified and directed by Engr In Charge.

M&L for Virified Ceramic dark shade / double charged/ultracharged tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, not exceeding 1. sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching complete all as specified and as directed by Engr-In-Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts, Knob and chain etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engr In Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5Sqm but not exc 4.00 Sqm each complete all as specified and as directed

S&F aluminium powder coated any colour (minimum thickness of powder coating 50 micron) frame for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing with suitable arrangement complete all as specified and directed by Engr In Charge.

S&F aluminium powder coated an (minimum thickness of powder coating 50 micron) as in window and ventilator shutters, sliding type three track, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber packing, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engr-In-Charge.

S&F for powder coated aluminium doors shutters,( thickness of powder coating not less than 50 micron) alumonium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing , handels 2 Nos in each door , hinges, anodised aluminium snap beading screws etc. complete all aspecified and directed by engr-In-Charge.

S&F 12mm thick particle board prelaminated on both sides as in panel of door shutters partition wall, work stations including beading etc.omplete all as specified and directed by Engr-in-Charge.

S&F Aluminium(extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed and specified.

S&F 140 mm long Floor door stopper of brass body and tongue with hard drawn steel spring,including beading etc.omplete all as specified and directed by Engr-in-Charge.

M&L for point wiring with single core of FRLS PVC insulated unsheathed ISI marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20 mm including conduit fittings and accessories concealed in wall / ceiling wiring terminated in flush metal box alongwith outer cover plate for mounting modular/piano switch, socket and electronic regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS ISI marked copper conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge. For One light point controlled by one switch one way.

All as per srl item 100 above but for one ceiling fan / Exhaust fan point controlled by one switch regulator.

All as per item No 100 above but for one 3 pin 5 amps socket outlet on indipendent board with other switchs.

All as per item No 100 above but for one 3 pin 5 amps socket outlet on the same board with other switchs.

All as per item No 100 above but with 2.5 Sq mm cable for Independent one 3 pin 15 Amps socket outlet In and including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR cable for continuous earth wire.

S & F Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S & F Modular Socket, 6A - 2/3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F Modular switch 1 way 16A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S & F Modular Socket, 16A - 2/3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and fix White cover plate with frame,3 module Complete all as specified and directed by Engineer-in-Charge.

Supply and fix White cover plate with frame,4 module Complete all as specified and directed by Engineer-in-Charge.

Supply and fix White cover plate with frame,6 module Complete all as specified and directed by Engineer-in-Charge.

Supply and fix White cover plate with frame,8 module Complete all as specified and directed by Engineer-in-Charge.

S & F Modular metal flush box 3 module Complete all as specified and directed by Engineer-in-Charge.

S & F Modular metal flush box 4 module Complete all as specified and directed by Engineer-in-Charge.

S & F Modular metal flush box 6 module Complete all as specified and directed by Engineer-in-Charge.

S & F Modular metal flush box 8 module Complete all as specified and directed by Engineer-in-Charge.

S&F MCB SP 6 to 32 Amps 10 KA, 240 volt 'C' Series all as specified and directed by Engineer-in-charge. Make:- Havells/indoasian/ Legrand

Supply and fixing in replacement load line vertical distribution board 'A' frame made out of CRCA sheet,double door, surface mounting TPN 4 way 415 volts 200 Amps rated bus bar and stove enamels dust and vermin proof suitable forTP/FP 'A' frame with MCCB of 125 Amps =01 No MCB for outgoing comlete all as specified and as directed by Engineer-in-Charge. Make :Cat Part No - DB LL4W DD VERT W/O MCCB of Havells or equivalent in Standard/ Halonix Note :- MCB shall be measured and paid seperately.

Supply & fix in replacement of 9W LED light 3000K warm white energy efficient PVC body including complete fixing arrangement with proper connection all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of 12W LED light 3000K warm white energy efficient PVC body including complete fixing arrangement with proper connection all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of full glow 18-Watt round type LED Surface mounted downlighter for Ceiling of make PHILIPS Rimless of color Warm White, including complete fixing arrangement with proper connection all as specified and directed by Engr-in-Char

Supply & fix in replacement of 18W LED light 3000K warm white energy efficient PVC body including complete fixing arrangement with proper connection all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of CRELITE 1X4 feet commercial LED panel light 45W coloor temperature 2700k LED Panel Light fitting, voltage 90-270V lumes 120Lm/Watt aluminium housing commercial LED panel of make crelite cat part No CRPL09 or equvilent make of polycab/Havells/Halonix all as specified and directed by Engr-in-Charge.

Supply and fixing 150W Jeta Iris IP66 LED Flood Light, JETAIRISFLS150WLED757PSYMLTG or equvilent indirect light IP 66 protection with impact and corrosion resistant complete with driver and lamp complete.

Supply & fix Chimney black 750 CMH of make Hindware Clarissa Blk 60/ Clarissa BLk 60 IN wall mounted including proper fixing arrangment at site complete all as specified and directed by Engr-in-Charge.

S&F in repair of sub main wiring with 2 single core 04 Sq mm PVC insulated unsheathed 1100 V grade copper conductor cable drawing in existing rigid non- metallic PVC/metallic conduit incl 4.0 Sq mm PVC insulated single core copper conductor cable for continuous earth wire. Note:- Three run of 4 sqmm wire incld one run of PVC/metalic conduit shall be measured as one unit length.

S&F in replacement of exhaust fan PVC heavy duty non metalic 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.

J D ENTERPRISES