Construction of Toilet, Footpath and other basic ammenities for athupalam burial ground in ward no 86, South Zone

Cleaning the Juncle using Mechanical JCB as per the Direction of the Departmental officers Etc., Complete

Providing and laying well gravel including cost and conveyance of all materials from approved quarries as noted in lead chart to the road site including loading, unloading and stacking the well gravel at road site to departmental gauge for pre-measurement including labour charges for laying spreading leveling to camper etc., complete as per specifications.,

Providing cast in situ cement concrete 1: 11/2 : 3 (one cement, one and half M.Sand and three coarse aggregate) using 20mm size HBBG metal for 23cm dia pile including cost of materials labour, hire charges for machinery for earth work for forming 23cm dia bore hole to the required depth before concreting excluding cost of steel reinforcement (Data for 4.50 RM)

Earth work excavation to all soils with initial lead and lift etc. complete

Cement concrete 1:4:8 mix using 40mm size HBG metal from approved quarry etc. complete

Centering with steel plates for sides & soffits etc. complete For Plinth Beam

Supplying and erecting centering for sides and soffits including supports and strutting for plain surfaces such as reinforced cement concrete slabs, walls etc., complete

Reinforced Cement concrete 1:1.5 :3 (one cement, one & half M.sand and three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Supplying, fabrication and placing in position of steel reinforcement using mild steel of Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wore and all labour charges for cutting, bending & tying etc., complying with standard specifications - 1 Quintal

Plain cement concrete 1:2:4 mix (One cement two M.Sand and four aggregate) using 20mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification - 1 m3 (detailed data for 10 m3 )

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") including cost of materials and labour charges etc., as per standard specification - 1m

Plastering in Cement mortar 1:5 mix to 12mm thick etc. complete.

S/F of MS Truss with purlins using ISMB steel sections including all labours and transports charges as per direction of departmental officers.,

Supply and fixing of Stainless steel Handrail including all labours and transports charges as per direction of departmental officers.,

Roofing with Colour Coated Galvolume sheet profile 0.47mm thick including necessary bolt, nut and bituminous washer etc. complete.

Painting with plastic emulsion paint in two coats over a base coat of approved colour and quality etc., complete

Filling with Quary Rubbish in Layer by Layer including Watering and Consolidation and all labour charges for Spreading as per the Direction of the Departmental officers Etc, Complete

Providing and laying of Rubber Moulded Hydraulic Pressed Paver Block size 83mm thick to be laid in lorrying bone pattern with approved non sticking surface in the top and the rate including leveling the base, preparation of sub base with sand cushion 100mm thick, laying out the pavement, cut the pieces to fit the edge, vibrating the pavers, sweeping the sand grouting, providing transporting, loading unloading and laying of paver block as per standard specification.

Supply and fixing of 65mm dia GI pipe(Class'B') 4metre length with 300mmx300mmx6mm MS base plate duly welded at the bottom with concreting and construction of masonary pedestal with MS box of 30cmx20cmx10cm with angle iron frame work with door and lock and key arrangements with supply and fixing of 60W LED street light fitting with bulb and with supply and fixing of 1No. 16A fuse unit (500V) and 5A SP switch inside the MS box with PVC unsheathed FRLS leads and painting of suitable colour

Supply and Laying of 4x10 Sq. mm PVC armoured LTUG cable in a Trunch to be Excavated at a Depth of 0.75 m Putting 0.15m Layer of Sand covering the Cable completely with bricks and Sand and Refilling the Earth to make Good SD 196

Supplying and fixing of HDPE Water Tank with suitable specials including cost of materials to site and all other labour charges.etc

Supplying and Fixing of Indian make WHITE WATER CLOSET of size 580mm x 440mm with 'P' Trap and foot rest and Filling allround the closet using 20mm broken brick jelly including fixing in position and levelling etc., complete

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed copper cable of 1100 V grade with suitable rigid pipe on walls & ceiling for concealed light / fan point

Supply and run of 4 x6 sq.mm. PVC Insulated copper cable (7/20) run of mains for service connection. Etc. complete.

Supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting .

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter