REPAIR/ MAINT/ LT ELECTRICAL DISTRIBUTION SYSTEM, REPLACEMENT OF UNSERVICEABLE FITTINGS/ FIXTURE AND ALLIED WORKS AT TECHNICAL AND DOMESTRIC AREA19 WING AND 14 BRD UNDER GE (AF) BORJHAR

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding1.5 mtr in depth for laying under ground cable / foundations and getting out in soft / loose soil all as specified and directed.

Taking down of unserviceable under ground old LT Cable of any size complete all as directed

Supply, laying, jointing and testing XLPE insulated, PVC bedded, Galvanized steel strip or wire armoured underground heavy duty electric power cable with stranded aluminum conductor 1100 volts grade, laid in trenches / duct with shaddling / on pole including all necessary fixing arrangement such as lugs, glands end termination etc of cross sectional area 70 Sqmm 3.5 core complete all as specified and as directed. Make :Polycab / Asian Cable / Havells India Ltd / Gloster Cables Ltd / KEI Industries Ltd /Finolex

All as per item No.3.00 herein before but of size 95 Sqmm x 3.5 core complete all as specified and as directed.Make :Polycab / Asian Cable / Havells India Ltd / Gloster Cables Ltd / KEI Industries Ltd /Finolex

All as per item No.3.00 herein before but of size 185 Sqmm x 3.5 core complete all as specified and as directed.Make :Polycab / Asian Cable / Havells India Ltd / Gloster Cables Ltd / KEI Industries Ltd /Finolex

All as per item No.3.00 herein before but of size 400 Sqmm x 3.5 core complete all as specified and as directed.Make :Polycab / Asian Cable / Havells India Ltd / Gloster Cables Ltd / KEI Industries Ltd /Finolex

M&L for fine sand (River sand) spread in trenches for cushioning of cable 8cm thick under the cable and 15cm over the cable and punned down gently to 18 cm for protection complete all as specified and as directed.by Engineer–in-charge. Note :- Compacted thickness shall be measured and paid

M&L for brick protection with sub-class ‘B’ bricks laid dry flat (23cm width) cross the cable for protection to cable after sand cushioning complete all as directed by Engineer-in-Charge.

M&L for 50 mm bore mild steel galvanised iron pipe, light grade laid in trenches or fixed to wall/along the pole for protection of cable as in repair complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick each layers complete all as specified and as directed by Engineer-in-Charge.

Removal of surplus spoil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.by Engineer –in-charge.

Relaying of old serviceable brick after carrying out repair, cleaning the surface complete all as directed by Engineer-in-Charge. Note : - Seviceable brick obatined from ser item No.2 shall be used.

Relaying of old LT cable of any size/core after carrying out repair such as joining epoxy joint and laid with sand cushioning and brick protection and making connection by using lugs complete all as directed by Engineer-in-Charge. Note : - (i) Seviceable LT cable obatined from ser item No.2 shall be used. (ii) Sand, brick and lugs shall be measured and paid seperately under respective item of schedule.

S & F cable jointing kit for 1100Volt (earthed) grade cable for Straight through, heat shrinkable type joint complete with jointing materials and accessories suitable for LT, XLPE armoured aluminium conductor cable of size 50 to 95 Sqmm, 3.5/4 core, fixed in repairs complete all as specified and as directed by Engineer-in -charge.

S & F cable jointing kit for 1100Volt (earthed) grade cable for Straight through, heat shrinkable type joint complete with jointing materials and accessories suitable for LT, XLPE armoured aluminium conductor cable of size 25 to 50 Sqmm, 3.5/4 core as in repairs complete all as specified and as directed by Engineer-in -charge.

S & F cable jointing kit for 1100Volt (earthed) grade cable for End termination, heat shrinkable type joint complete with jointing materials and accessories suitable for LT, XLPE armoured aluminium conductor cable of size 240 to 400 Sqmm, 3.5/4 core as in repairs complete all as specified and as directed by Engineer-in -charge

S & F cable jointing kit for 1100Volt (earthed) grade cable for End termination , heat shrinkable type joint complete with jointing materials and accessories suitable for LT, XLPE armoured aluminium conductor cable of size 50 to 95 Sqmm, 3.5/4 core as in repairs complete all as specified and as directed by Engineer-in -charge.

S & F cable jointing kit for 1100Volt (earthed) grade cable for End termination, heat shrinkable type joint complete with jointing materials and accessories suitable for LT, XLPE armoured aluminium conductor cable of size 70 to 150 Sqmm 3.5/4 core as in repairs complete all as specified and as directed by Engineer-in -charge.

Dismantling /taking down old unserviceable LT over head ACSR conductor (weasel ) of any size including separating serviceable conductor and kept in safe custody for re-use in the work and removing unserviceable conductor from site from LT poles/over head electric line after disconnecting from insulators complete all as specified and as directed by Engineer-in-Charge.

S & F aluminium conductor steel reinforced (ACSR) on over head LT electric line with stretching and tensioning the same with required span sag, providing jumper, making bus bar and binding the conductor with pin/shackle insulator and jumpers with aluminium binding wire not less than 2mm dia complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 20.00 herein before but fixing & restring only complete all as specified and as directed. Note : - (i) Seviceable ACSR conductor obatined from ser item No.20 shall be used.

S & F PVC flexible LT OH line separater (ISI marked) of size 10mm dia, tightened properly on LT OH ACSR at 4 span including jointing as in repairs complete all as specified and as directed by Engineer-in -charge.

All as per item No.22.00 herein before but for 3 span

All as per item No.22.00 herein before but for 2 span

M & L for jumpering of two sides of ACSR conductor on over head with same conductor of length 1 mtr and with two nos clamp of suitable size including taking down old unserviceable complete all as specified and as directed by Engineer-in -charge.

Dismantling and taking down cross arms of MS channel or angle sections, clamps, nut and bolt, washers, back plate of any size/shape complete setting aside serviceable cross arms for re-use the work and removing unserviceable cross arms from site complete all as specified and directed.

M&L for cross arms, bracing, support, clamps and back plates fabricated from structural steel section including nuts, bolts, washer, welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed including GI clamp and including of one primer coat, one under coat and one finishing coat of aluminium paint over a coat of red oxide complete all as specified and as directed by Engineer-in-Charge.

Fixing only old serviceable cross arms with providing new bolts, nuts and washers as required including painting with one coat of aluminium paint after preparation of old surface complete all as specified and as directed. Note : - (i) Seviceable cross arms obatined from ser item No. 27 shall be used.

Dismantling old unserviceable bending/ broken steel tubular pole of any size with necessary disconnection of electric wire, demolition of concrete foundation including excavation and earth work as required and removing the same from site complete all as specified and directed.

Supply & erecting in truelly vertical position of mild steel tubular swaged poles of 9 meter long, type 410-SP-31, complete with cast iron base plate, goose neck bracket, finial taper plug, bolt, nuts & screws confirming to IS-2713 of 1980 and internal surface painted with black bituminous paint & external surface painted with two coat of aluminium paint over one coat of red oxide primer from top of pole to 1.5 mtr above from top of PCC coping & from top of PCC coping to 1.5 mtr height portion of pole painted with black & white colour paint as in alternate strips complete all as specified and as directed .by Engineer –in-charge. Note :- Size of any colour strips shall be decided by Engineer-in-Charge as per Electricity code of practice.

M&L for PCC (1:3:6) type C-2, using 40 mm graded stone aggregate as in foundation, coping/collar for poles including necessary form work and finished to exposed surface even and fair without using extra cement all as specified and as directed by Engineer-in-charge

M & L for painting to steel tubular LT pole of 9.00 mtr long (effective painted length from top of foundation concrete to top of pole) including cross arms, clamps and M.S brackets surface of any description including removal of old paint with chemical or burning with glow lamp & cleaning to steel surface with sand paper & preparation of steel surface & applying one coat of aluminium paint on pole accessaries like as cross arms, clamp, & bracket etc including marking of pole No of 40mm height in block letters as (MES/BOR/.....) and lower portion of pole painted with one coat of black synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Dismantling of old unserviceable stay assembly including stay wire complete with necessary demolition of concrete excavation and earth work as required and removing the same from site complete all as soecified and directed. Note:- Earth work & excavation shall be measured separately under respective item of schedule.

S & F galvanised stay wire (stay strand) of size 7/4mm with properly tightening the same complete all as specified and as directed by Engineer-in -charge.

M&L for stay assembly with 20mm dia stay rod complete with all accessories as shown in electrical plate No 01 SSR Part-I (2009) with stay rod of 20mm dia complete all as specified and as directed by Engineer-in-Charge.

Dismantling of LT insulators of any type and size from any position including seperating and getting aside serviceable insulator for re-use in the work from site complete all as specified and directed.

S & F for pin type porcelain, vitreous, white, brown or green insulators including galvanized mild steel spindle, two galvanised iron washers and one galvanized iron nuts, 100 mm height 65 mm dia for 1100 volts grade as in repair complete all as specified and as directed by Engineer-in -charge.

All as per item No.37.00 herein before but for fixing only. Note:- Old serviceable pin type insulator obtained from srl item No. 38 shall be used

S & F shackle type pocelain vitreous white, brown or green insulators for working pressure 1100 volt of 90 mm dia and 75 mm height including galvanized mild steel straps of 31x3 mm size, washers, 12 mm dia insulator bolts, nuts & washers including connected to conductor as in repairs as in repairs complete all as specified and as directed by Engineer-in -charge.

All as per item No. 39.00 herein before but for fixing only. Note:- Old serviceable shackle type insulator obtained from srl item No. 40 shall be used

Supply and fixing loop type insulators vitreous, porcelain white, brown or green large size with over all dimensions of 90x140 mm clearance or hole 25.5mm as in repairs complete all as specified and as directed by Engineer-in -charge.

Cutting and trimming of tree branches, bushes n.exc 5 Mtr girth all along LT overhead lines/guard wire and removing branches out of defence land complete all as directed.

S&F change over switch 63 amps 4 pole 415 volt front operated inside the panel with cable connection and accessories after taking down the old unserviceable one complete all as specified and directed . Make Havells Cat No. IHCNFE0063 or equivalent make as sepcified in PS

Taking Down existing old unserviceable MCCB/Main Switch of 63,100 250 &400Amps from the panel complete all as per directed.

S&F MCCB 250 amps, 4 pole,415 Volt adjustable type with breaking capacity 36 KA complete all as specified and directed. Make : Havells Cat No. IHLLSECF0250 or equivalent make as sepcified in PS

S&F MCCB 200 amps, 4 pole,415 Volt adjustable type with breaking capacity 36 KA complete all as specified and directed. Make : Havells Cat No. IHLLSECFO200 or equivalent make as sepcified in PS

S&F MCCB 160 amps, 4 pole,415 Volt adjustable type with breaking capacity 36 KA complete all as specified and directed. Make : Havells Cat No. IHLCNF0160 or equivalent make as sepcified in PS

S&F MCCB 100 amps, 4 pole,415 Volt fixed type with breaking capacity 16 KA complete all as specified and directed. Make : Havells Cat No. IHLGNF0100 or equivalent make as sepcified in PS

S&F MCCB 63 amps, 4 pole,415 Volt fixed type with breaking capacity 16 KA complete all as specified and directed. Make : Havells Cat No. IHLGNF0063 or equivalent make as sepcified in PS

S&F 1100 votls grade heavy duty cable PVC insulated stranded 10 Sqmm aluminum conductor served with inner sheathing of PVC tape and overall PVC sheathed for service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia suspension wire one twin core cable flat or circular including taking out old existing unserviceable one complete all as specified and directed.

All as per serial item No. 50.00 above but for 6 Sqmm cable

S&F in repair digital type voltmeter 0-500 volt 96x96 mm square type complete all as specified and directed.

S&F in repair digital type ammeter 0-400 amp 96x96 mm square type complete all as specified and directed.

S&F in repair CT 400/5 , copper wounded with suitable wiring for digital type ammeter for 3 phase connection complete all as specified and directed.

Taking out / down faulty serviceable11KV, HT UG cable in existing trenches/duct/on HT poles of nominal cross sectional area from 95 to 185 Sqm, 3 core including disconnecting, PCC covers, GI Pipe etc. of any descriptions, including segregation of serviceable materials viz PCC cable cover, GI Pipes etc. and tracing the location of fault and keep in safe custody for re-use complete all as specified and as directed NOTE : (i) Earth work shall be measured and paid for separately under relevent items (ii) Serviceable cable covers will be kept aside for re-use (iii) Serviceable GI pipe will also be kept aside for re-use

Re-laying of serviceable HT Cable XLPE insulated with aluminium conductor of size from 95 to 185sqmm, 3 core, 11000 volts grade complete all as specified and directed.

Re-laying only old PCC cable cover in Trenches for Under Ground cable protection (Serviceable Materials obtained fron item No. 59 here-in-before), complete all as specified and directed.

Supply, laying, jointing and testing of electric cable, heavy duty 11KV (E) grade, XLPE insulated, screened with sound compacted aluminium conductor, conductor screening with extruded semi-conducting layers insulation screening with copper tape covers laid up with PVC (ST-2) extruded inner sheathing galvanised steel strip armoured PVC (ST-2) outer sheathed cable conforming to IS-7098(Part-II) amended of Nominal cross sectional area of 185 sqmm, 3 core, laid in trenches/cable duct complete all as specified and as directed.

Material and labour for cable jointing kit for 11KV (Earthed) grade cable for Straight through 95 sqmm to 185 sqmm 3 core, heat shrinkable type joint complete with jointing material and accessories suitable for 3 core, XLPE armoured aluminium conductor cable including testing etc complete all as sepcified and directed.

Material and labour for cable jointing kit for 11KV (Earthed) grade cable for Out door End termination 50 sqmm to 95 sqmm 3 core, heat shrinkable type joint complete with jointing material and accessories suitable for 3 core, XLPE armoured aluminium conductor cable including testing etc complete all as sepcified and directed.

M & L for detecting carefully the fault location of HT UG cable of size 95 sq mm to 185 sq mm 3 core either HT cable fault locator machine or any other method and taking out remove the faulty portion of cable from undergound /over all length respectively inc meggering /connecting/testing on completion all as directed by EIC. Note: (i) Excavation & earth work shall be deem to be included in the unit rate of this item of work.(ii) Stright throught joint for HT cable shall be measured and paid seperatly under respective item of this schedule (iii) Actual detected fault shall be paid under this item. Dummy located trail shall not measured & paid under this item

Supply, install, testing and commissioning in replacement of 11KV outdoor type Polymer based gang operated air brake switch triple pole, suitable for verticle mounting complete with explusion fuses, GI operating rod of suitable length for operating mechanism worked from ground level complete in both OFF and ON positions, for current rating upto 200 Amps, each pole consist of galvanised steel base HT insulators as per BSS / ISS non ferrous knife and spring loaded contacts, arcing horns of adequate section to brake magnetizing current of the transformers. All ferrous parts hot dipped galvanised and non ferrous parts heavelly tinned to withstand weather complete all as specified and directed.

Supply and fixing in repairs Polymer based dropout fuse unit complete set suitable and including for 11 KV, HT outdoor and dropout type of capacity 200 Amps including jumper connections with copper flexible designed jumper and testing and commissioning all as per the directions of Engineer-in-charge .

Supply and fixing in repairs GI pipe light grade 100 mm dia for cable protection incl all fittings laid in trenches or fixed on pole with suitable clamps complete all as specified and directed.

Supply and fixing in repair aluminium cable lugs for fixing of armoured cables in panels for 50 Sqmm cables complete all as specified.

All as per item No 69 above but for 70 Sqmm cable

All as per item No 69 above but for 95 Sqmm cable

All as per item No 69 above but for 120 Sqmm cable

All as per item No 69 above but for 150 Sqmm cable

All as per item No 69 above but for 185 Sqmm cable

All as per item No 69 above but for 240 sqmm cable

M&L for preparation of old painted body surface of LT indoor/out door panel / feeder piller box and spray painting with two coat of synthetic enamel paint as per existing colour to inside and outside of the body of LT panel as directed by the Engr-in -Charge complete all as specified and directed.

M&L for Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including 25 x 4 mm GI strip upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 40 mm dia GI pipe connected to main control board and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mm c/c and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses, pandents, regulators, sockets etc. to be measured separetaly) removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.

Taking down carefully by unscrewing from boards/out let boxes, fittings and fixtures such as switches, sockets, ceiling roses lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc. for reuse at site or carrying to the store. (Note: if it is serviceable then measured)

M & L Point wiring with 1.5 Sqmm PVC insulated and unsheatheed single core multi stranded copper conductor ISI marked 1100 volts grade drawn in existing conduits & accessories on walls/roofs ceiling including replacement of 3mm thick laminated sheet cover for fixing of switches/sockets etc including 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable for earth continuity and connecting to commom earth dolly complete all as specified and directed :-

(a) One light point controlled by one switch.

(b) One ceiling/Exhaust fan point controlled by one switch and regulator.

(c ) One 3 pin 5 amps switch sockets controlled by one switch piano type SP 5 Amps on a board independent type from switches.

(d) One 5 Amps switch socket outlet on the same board with other switches.

(e) One light point controlled by two switch piano two way

(f) One call bell point controlled by push buttom switch

All as per item Ser No 80 above but 2.5 sqmm cable for 3 pin 15 amps switch socket.

M & L Point wiring with 1.5 Sqmm PVC insulated and unsheatheed single core multi stranded copper conductor ISI marked 1100 volts grade drawn in existing conduits & accessories on walls/roofs ceiling including replacement of 3mm thick laminated sheet cover for fixing of switches/sockets etc including 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable for earth continuity and connecting to commom earth dolly complete all as specified and directed :-

(a) One light point controlled by one switch

(b) One ceiling/Exhaust fan point controlled by one switch and regulator.

(c) One Call bell point controlled by one switch

(d ) One 3 pin socket outlet 5 amps independent type

(d ) One 3 pin socket outlet 5 amps on a same board with other switches

(e) One light point controlled by two switch piano two way

All as per item Ser No 88 above but 2.5 sqmm cable for 3 pin 15 amps switches .

All as per item Ser No 88 above but 4 sqmm cable for 3 pin 15 amps switches .

Supply and fix ceiling rose , 3 phase /PVC/Polycarbonate, isolated body complete all as specified and as directed .MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Supply and fix in repair switches piano type for light /fan 5 amps single pole one way complete all as specified and as directed . MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Supply and fix Piano switch 230V two way complete all as specified and as directed. MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Supply and fix Modular switch 1 way 6 A, 1 modulecomplete all as specified and as directed. MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Supply and fix switch socket outlet 2 in 1, 3 pin, 5 Amps complete all as specified and as directed.MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Supply and fix Socket 6 A, 2/3 pin combined 2 modulecomplete all as specified and as directed. MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Supply and fix bell push flush type with appropriate marking of bellcomplete all as specified and as directed MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER .

Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and as directed .MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Supply and fix switch socket combination 2 in 1.3 pin 5/15 amps flush type univrsal 240 bolts grad complete all as specified and as directedMAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER .

Supply and fix Socket 6A/16A 2/3 pin combined 2 modulecomplete all as specified and as directed .MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Supply and fix White cover plate with frame 1 module complete all as specified and as directed.MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER/L&T

Supply and fix White cover plate with frame 2 module complete all as specified and as directed.MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Supply and fix Metal flush box 1/2 module complete all as specified and as directed.MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Supply and fix Metal flush box 3 module complete all as specified and as directed.MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Supply and fix electrical ding dong bell suitable for operation 230 volts 50 Hze single phase complete all as specified and as directed.MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Supply and fix LED tube light fitting. 1x18 Watt, Box type surface mounted 230 V, 4 ft etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and including one LED tube, 18 W complete all as directed at site complete. make - Crompton code no- LT5RT-18-CDL or equivelent bajaj/ surya/Havells/Philips

All as per item no 112 but for 10 watt Make:Bajaj cat no BCLSB 10 NW or equivelent / Havells /CG/HCL/Surya/Philips

S/F 3 watt LED sleek square recessed mounting LED decorative down lighter with aluminium die cast body finish with drop down PC diffuser to deliver low glare illumination with optmized heat sink for efficenet heat dissipation complete all as specified and as directed. (Make: Bajaj cat no BGSLO SLEEK 3 W WH RD or equivelent / Havells /CG/HCL/Surya/Philips

S/F 8 watt LED sleek square recessed mounting LED decorative down lighter with aluminium die cast body finish with drop down PC diffuser to deliver low glare illumination with optmized heat sink for efficenet heat dissipation complete all as specified and as directed. (Make: Bajaj cat no BGSLO SLEEK 8 W WH SQ or equivelent / Havells /CG/HCL/Surya/Philips

S & F Decorative wall light fixture made up of plastic batten with white acrylic cover suitable for 5 watt LED complete all as specified and as directed. Make: Bajaj cat no B 05 WH or equivelent / Havells /CG/HCL/Surya/Philips

S & F Surface mounting round, Decorative Downlighter with dome shape opal diffuser suitable for indoor application of 1 x 6 wat with lampcomplete all as specified and as directed.( Make: Bajaj Cat no. BGCML 6 w WH/ or equivelent / Havells /CG/HCL/Surya/Philips

S& F Bulk head in diecast aluminium housing & frosted glass suitable for outdoor 1 x 8 w LED all as specified and directed( Make: Havells cat no LHKL01160099or equivelent / CG/HCL/Surya/Philips

S&F lamp holder pvc /polycarboncte type with cord grip cap suitable for pendant fittings complete all as specified and as directed.

Supply and fix LED Building light fittings 15 Watt pressure dia cast housing with epoxy power coated dark graphate grey coiour finish, polycarbonate cover with indivisual LED lenses with IP 65 protection complete ass as directed .Make-Bajaj Code-BCLST 15W LED or equivelent / Havells /CG/HCL/Surya/Philips

Supply and Fixing Surface mounted LED 12 Watt downlighter with white powder coated aluminium housing withh integrated electronic driver complete all as specified and as directed.Make: Havells/Bajaj/CGL/Philips/Surya

S&F 36W LED 4000K Ultra modern recess mounting luminaire suitable for armstrong/grid/POP ceiling complete with separate electronic driver & high brightness SMD LEDs Fixture size 595x595 mm. Ceiling cutout 580x580 mm complete all as specified and as directed. Make:Bajaj BCTBLR 36 W LED FPCW and equivelent /Philips/Havells/ C&S

Supply and fix only 18 Watt,Tube light fittings ,Box type suitable for surface mounted 230 V , 4 ft etc. including taking down old tube light fitting complete all as directed . Make - Bajaj /Havells/CGL/Philips/Surya

M & L for MCCB factory mode sheet metal and double door angle for DBs and isolator to be used with 200 amps bas bar TPN 4 way including 100 amps complete all as specified and as directed. Make Legrand/Havells/stranderd /Siemens/L&T .

S&F powder coated sheet metal enclosures MCB DB, double door, single pole and neutral, 4 way 220 volts fitted with bus bar DIN rail neutral link and incoming contact complete all as specified and directed by Engr-in-charge. Make:- Legrand/Havells/stranderd/Siemens/L&T

S&F powder coated sheet metal enclosures MCB DB, double door, single pole and neutral 8 way 240 Volt fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed by Engr-in-charge. Make:- Legrand/Havells/stranderd/Siemens/L&T

S&F powder coated sheet metal enclosures MCB DB, double door, single pole and neutral, 4 way 220 volts fitted with bus bar DIN rail neutral link and incoming contact complete all as specified and directed by Engr-in-charge.Make:- Legrand/Havells/stranderd/Siemens/L&T

S&F MCB SPN 40 to 63 Amps breaking capacity 10 KA 240 volts, 'C' series, complete all as specified and directed by Engr-in-charge.Make:- Legrand/Havells/stranderd/Siemens/L&T

S&F MCB SPN 6 to 32 Amps breaking capacity 10 kA 240 volts, 'C' series, complete all as specified and directed by Engr-in-charge.Make:- Legrand/Havells/stranderd/Siemens/L&T

S&F MCB SP 6 to 32 Amps breaking capacity 10 KA 240 volts, 'C' series, complete all as specified and directed by Engr-in-charge.Make:- Legrand/Havells/stranderd/Siemens/L&T

S&F MCB SPN 40 to 63 Amps breaking capacity 10 KA 240 volts, 'C' series, complete all as specified and directed by Engr-in-charge. Make:- Legrand/Havells/stranderd/Siemens/L&T

S & F blanking plate for MCB DBs complete all as specified and directed by Engr-in-charge MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

Taking down existing main switches/DBs etc. of any size/typecomplete as specified and directed.

Taking down old unserviceable sub main wiring any size complete with PVC conduit/ casing capping and removing materials from site and making good disturbed surfaces of walls, etc complete as specified and directed.

M & L submain wiring with two single core PVC insulated unsheathed stranded copper conductor 4 sqmm (nominal area) drawing through PVC casing caping and 2.5 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly(Note : PVC conduit will be measured & paid separately). MAKE:- HAVELLS INDIA LTD, FINOLEX, NICCO, KEI, POLYCAB, RR KABEL LTD, MESCAB

All as per item Ser No 135 above but 6 Sqmm. MAKE:- HAVELLS INDIA LTD, FINOLEX, NICCO, KEI, POLYCAB, RR KABEL LTD, MESCAB

All as per item Ser No 135 above but 10 Sqmm. MAKE:- HAVELLS INDIA LTD, FINOLEX, NICCO, KEI, POLYCAB, RR KABEL LTD, MESCAB

All as per item no 135 herein before but of size 2X2.5 sq mm and 1X1.5 sqmm MAKE:- HAVELLS INDIA LTD, FINOLEX, NICCO, KEI, POLYCAB, RR KABEL LTD, MESCAB

All as per item no 135 herein before but of size 2X 1.5 sq mm and 1X 1 sqmm MAKE:- HAVELLS INDIA LTD, FINOLEX, NICCO, KEI, POLYCAB, RR KABEL LTD, MESCAB

S & F PVC casing caping of size 20/25 mm including all fittings and fixtures acessories fixed to wall/ceilling for sub main wiring complete all as specified and directed. Make :-Presto Plast/ Finolex/ Kalinga/ Payal

S & F industrial DB with earth plug and socket and MCB 20 Amps complete all as specified and directed.MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

S & F in repair of 5 amps switch socket combination of 240 volt ac supply including taking down of old Unsv socket complete all as directed. MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

S & F in repair of switch socket combination 15 amps 2-in 1 of 240 volt ac supply including taking down of old Unsv socket complete all as directed. MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

S & F in repair Bell Push 5 amp flush type including taking down of old unsv switch complete all as specified and directed. MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

S & F in repair of Switch piano 5 amp flush type including taking dwon of old unsbv switch complete all as specified and directed.MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

S & F in repairs of Call bell ding dong type 230/240 volt AC including taking down of old unsv bell complete allas specified and directed.MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

S & F in repair of Fan regulator electronic step switch type 300 watt including taking down of old unsv regulator complete all as specified and directed.MAKE:- HAVELLS, ANCHOR, LEGRAND, SCHNEIDER

S & F in repair of Linear LED T8 tubular lamp with extruded aluminium body PC diffuser and inbuilt driver incudling taking down old unsv tube light fitting complete all as directed(Make: CG cat No LTT8-20/ Havells/Bajaj

Supply only Capacitor 2.5/3.15 MFD 230/240 volt AC as specified and directed.Make:USHA/Havells /Orient/Bajaj

S&F in repair PVC rectangular block with 3mm thick plastic laminated sheet cover of size 350x300x50mm depth fixed properly and to fix/connect the old serviceable switches, sockets, fan regulators etc as in repair complete all as specified and as directed.Make:- Presto Plast/ Finolex/ Kalinga/ Payal

S&F in repairPVC rectangular block with 3mm thick plastic laminated sheet cover of size 250x200x50mm depth fixed properly and to fix/connect the old serviceable switches, sockets, fan regulators etc as in repair complete all as specified and as directed. Make:- Presto Plast/ Finolex/ Kalinga/ Payal

S&Fin repair PVC rectangular block with 3mm thick plastic laminated sheet cover of size 200x150x50mm depth fixed properly and to fix/connect the old serviceable switches, sockets, fan regulators etc as in repair complete all as specified and as directed. Make:- Presto Plast/ Finolex/ Kalinga/ Payal

S&Fin repair PVC rectangular block with 3mm thick plastic laminated sheet cover of size 175x100 x50mm depth fixed properly and to fix/connect the old serviceable switches, sockets, fan regulators etc complete all as specified and as directed.Make:- Presto Plast/ Finolex/ Kalinga/ Payal

S&Fin repair PVC rectangular block with 3mm thick plastic laminated sheet cover of size 100x100 x50mm depth fixed properly and to fix/connect the old serviceable switches, sockets, fan regulators etc complete all as specified and as directed.Make:- Presto Plast/ Finolex/ Kalinga/ Payal

S & F 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspanded by insulating hangers not more than 1 mtr apart including 4 mm suspension wire one twin core cable of 10 Sqmm. MAKE:- HAVELLS INDIA LTD, FINOLEX, NICCO, KEI, POLYCAB, RR KABEL LTD, MESCAB

All as per ITEM Ser No 155 above but 6 Sq mm 2 core.MAKE:- HAVELLS INDIA LTD, FINOLEX, NICCO, KEI, POLYCAB, RR KABEL LTD, MESCAB

Earthing complete with GI Earth plate electric 600x600x6mm buried directly in ground verticaly to a depth of not less than 2.25m below ground level with the top edge of earth plate at a depth of not less than 1.5mtr below ground level connected to GI earth lead 4mm dia by means of nuts bolts washers etc made out of galvanised iron and GI wire connected to main switch/ DB board including neecessary excavation and earth work PCC (1:3:6) type C1 using 20mm graded stone aggregate earth chamber 40mm thick RCC cover type B1 (1:2:4) B1 using 20mm graded stone aggregate 20mm dia GI medium grade protection pipe upto main switch board etc complete all as shown in electrical plate No 5 of MES Schedule part I.

M/S Trio Engineers And Builders

M/s Nice Traders

Ms Sukumar Talukdar and Co.

M/S RUPDEEP ENTERPRISES

Ms N D Enterpise

M/S Kiran Chandra Das