REPAIR POLISHING CANNING PAINTING OF

Amount

Repair to Chair Wooden Bottom with out Arms FD-285 Supply and fixing of following parts of Ist class sheesham wood including taking out of old unserviceable parts all as directed by Engineer-in-Charge Front legs

Rear legs

Rails

Stiffeners

Back rest

Seat : Seat shall be of ply wood commercial 5 No Ply 6 mm thick, ISI marked.

Repair to Chair Writing FD-280 Supply and fixing of following parts of Ist class sheesham wood including taking out of old unserviceable parts all as directed by Engineer-in-Charge. Front leg

Rear leg

Rails

Stiffener

Back Rest

Repair to Chair Easy FD-229 Supply and fixing of following parts of Ist class sheesham wood including taking out of old unserviceable parts all as directed by Engineer-in-Charge. Front leg

Rear leg

Rails

Stiffener

Repair to Chair Dining FD-228&279 Supply and fixing of following parts of Ist class sheesham wood including taking out of old unserviceable parts all as directed by Engineer-in-Charge. Front leg

Rear leg

Rails

Stiffener

Back rest

Repair to Table 3'x2' with out drawer FD-223 Removing unserviceable parts of Table 3'x2', supply and fixing of the following parts to table all as shown on drg and as directed Legs

Side rails

Front & back rails

Top of Table 3' x 2' shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Repair to Table Peg FD-227 Removing unserviceable parts of table peg as follows, supply and fixing new parts as per drg. Top of Table Peg shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Stiffeners

Repair to Teapoy wooden FD-278 Removing unserviceable parts of Teapoy wooden as follows, supply and fixing new parts as per drg. Top of teapoy wooden shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Legs (Legs shall be made out of Ist class sheesham wood duly seasoned as per drg)

Stiffeners

Repair to Table office clerk wooden DB-4120 Removing unserviceable parts of table office clerk wooden and Supply and fixing new parts as per drg and as directed Legs (Legs shall be made out of Ist class sheesham wood duly seasoned.

Top of table office clerck wooden shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Repair to Bed hard with Ply wood top/Bed Newar FD-246&247 Removing of existing broken/burn out parts of bed ply wood top, Supply and fixing new parts of bed ply wood top as per drg and as directed. Long rails (Ist class hard wood/sheesham)

Short rails (Ist class hard wood/sheesham)

Legs (Ist class hard wood/sheesham)

Head rest as specified in drg

Foot rest

12 mm plywood Top 6'x3'

L clamp of MS 4 mm x 150mm x 40mm

Repair to Locker Bed Side with mirror FD-222 Removing unserviceable parts of locker bed side and supply and fixing new parts of locker bed side as per drg and all as directed. Shutters (Shutters shall be made out of 18 mm thick particle board exterior grade ISI marked).

Top (Top of locker shall be with particle board 18 mm thick exterior grade ISI marked)

Hinges piano type shall be of steel 3/4" 24 gauge

Back of lockers shall be of plywood commercial 5 ply 6 mm thick BWR, ISI marked

Handle 100 mm shall be of extruded aluminum fabricated type.

Hasp and staple (Aluminum anodised 75 mm size)

Repair to Table Writing FD-249&276 Removing unserviceable parts of table writing and supply and fixing the following parts of table writing all shown on drg and directed. Legs

Side rails

Stiffeners

Top of Table writing shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Table Dining for 6 pers FD-273 Removing unserviceable parts of table dining 6 pers and supply and fixing the following parts of table writing all shown on drg and directed. Legs

Side rails

Top of Table dining for 6 pers shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Table Dining 8 pers FD-273 Removing unserviceable parts of table dining 8 pers and supply and fixing the following parts of table writing all shown on drg and directed. Legs

Side rails

Top of Table dining for 8 pers shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

TABLE DRESSING LADIES WITH MIRROR:- FD-32,251 M&L in replacement blind mirror of table dressing ladies with mirror, copper electroplated, 5.5 mm thick of size1120x365 mm all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement ply back of mirror 6 mm thick both side commercial faces ,ISI mark cut into shape as requires all as shown in drawing and as diected by Engineer-in-Charge.

M&L in replacement Aluminium anodised drawer knob for table dressing ladies all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement broken glass shutter of table dressing ladies 5.5 mm thick cut into rquired size all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement aluminium channel for shutter of table dessing all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement Ist class hard wood (teak), broken legs of table dressing ladies W/M, duly finished to match with existing made out in shape all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement black / white colour PVC / rubber shoes for table dressing all as shown in drawing and as directed by Engineer-in-Charge.

TABLE DRESSING GENTS WITH MIRROR:- FD-31,230 M&L in replacement blind mirror of table dressing gents with Mirror,copper electroplated, 5.5 mm thick cut into shape, size 760x380 mm all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement ply back of mirror of table dressing gents 6 mm thick both side commercial face fixed in frame all as directed by Engineer-in-Charge.

M&L in replacement top of table dressing gents 18 / 19 mm thick prelaminted particle board one side teak faced and others side white in colour bonded with phenol formaldehyde all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement Ist class hard wood (teak) side plank of drawer of table dressing gents fixed with screw/ nail as shown in drawing and directed by Engineer-in-Charge.

M&L in replacement bottom ply of drawer 6 mm thick both side commercial, ISI mark all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement aluminium anodised powder coated knob of table dressing gents fixed with screw all as shown in drawing and as directed by Engineer-in-Charge.

Repair to Table Dining OR FD-165 Removing old unserviceable top of table dining OR and supply and fixing new top made out of pre-laminated particle board 18 mm thick one side teak faced with 4 mm thick teakwood beading all around the top.

S&F new 25 mm MS Square tube not less than 1 mm thick

Repair to Table Center FD-274 Removing unserviceable parts of table center as follows, Supply and fixing new parts as per drg. Legs shall be made out of Ist class hard wood sheesham duly seasoned as per drg.

Top of Table centre shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the sutter all as shown in drawing and as directed by Engineer-in-Charge.

TABLE BED SIDE :- Fd-28,210,212,248,276 M&L in replacement side plank (left or right) of table bed side 18/19 mm thick prelaminated particle board bonded with phenol formal dehyde exterior grade fixed with screw and fevicol all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement top of table bed side, 18/19 mm thick prelaminated particle board fixed with screw all as shown in drawing and as directed by Engineer-in-Charge

M&L in replacement self of table bed side 18/19 mm thich prelaminated particle board complete all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement legs of table bed side 1st class hard wood (teak) duly finished to match with existing and made out in shape, fixed with screw all as shown in drawing and as directed by Engineer-in-Charge.

SIDE BOARD FD-26M 241 M&L in replacement ply back of side board 6mm thick, both side commercial faces ISI mark fixed with nails and fevicol all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement side ply (left or right) of side board 12 mm thick, ISI mark fixed with suitable nails and fevicol on frame all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement of shutter of side board 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the sutter all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement 40 mm wide continuous piano hinges fixed with suitable size screw all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement front and rear plank of drawer, 1st class hard wood (teak) plank made out in shape duly finished to match with existing complete all as shown in drawing and as directed by Engineer-in-Charge.

Sofa Set Four/Five Seater FD-281 Removing of old unserviceable legs and S & F of new first class hard teak wooden legs size of 70 mm x 35 mm in section

Removing of old unserviceable wooden arm and S & F of new first class hard teak wooden arm

Removing of old unserviceable wooden front rail and S & F of new first class hard teak wooden front rail size of 35 mm x 100 mm

Removing of old unserviceable wooden Back rail and S & F of new first class hard teak wooden back rail size of 35 mm x 100 mm

Removing of old unserviceable seat wooden battens and S & F of new first class hard teak wooden battens size of 50 mm x 20 mm

Removing of old unserviceable back frame wooden battens and S & F of new first class hard teak wooden batten size of 50 mm x 20 mm

M&L in replacement of existing old wornout unserviceable cushion seat 560x530x100mm, 32/48 density, cool foam/ ISI mark covered with tapestry cloth, costing not less than Rs. 250/- per RM all as shown in drawing and as directed by Engineer-in-Charge.

Chair Revolving Tilting Low back & high back/Executive Repair of Chair revolving tilting low/high back and executives hydraulic system and Supply and refix the system with replacing of old unserviceable.

Removing of old unserviceable seat and back of all chairs and S & F of very fine quality Tapestry cloth in the existing place as directed by the Engineeer-in -charge.

S & F of high quality ISI marked rolling wheels of bottom of chair revolving low and high back/executive with replacing of old unservicesable wheels.

Teapoy verandah FD-208 & 255 M&L in replacement 900x450x18/19mm thick prelaminated particle board, Teapoy Verandah Top, phenol formal dehyde bonded, one side teak wood finish and other side white in colour lamination duly 4mm thick TW beading duly polished around the top fixed with 30/35mm long MS wooden screw on frame including preparing the steel surfaces and applying one coat of synthetic enamel paint on the frame complete all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement of legs 20mm dia of mild steel conduit pipe 1.6mm thickness made to "U" shape with 25mm x 3mm flat iron frame welded to conduit pipe, all as shown in drg or as directed by Engr-in-Charge.

S & F 20mm MS tube not less than 1 mm thickness

Recanning of chairs Re-canning to chair easy, chair dining, chair writing, chair BKA, stool dressing, Bin soiled linen etc with cane plastic 2 mm width oval or border of 3 mm wide all around of best quality make premier in Godrej pattern complete as shown on drg and directed. Chair dining

Chair Writing

Chair Easy

Chair Verandah

Chair Stool dressing CB

Bin Soiled linen

Polishing of wooden furniture Polishing shall be done with french polish, after preparation of surface with best quality french polish, of shade as approved by GE. (a) Preparation of surface: All unevenness shall be rubbed down to smoothness with sand paper and the surface shall be well prepared. The pores holes in the wood shall be filled with paste made out of white (chalk) mitti burnt sar-sena before polishing:- Almirah large wdn with shelves

Almirah med wdn with shelves

Almirah mess utensil

Book case

Book shelf open large wdn

Charpoy newar / Bed newar

Bed hard / Bed plywood top

Chair wdn bottom

Chair writing

Chair easy

Chair dining

Table 3'x2' without drawer

Table 3'x2' with drawer

Table peg

Teapoy wooden

Sleeping platform

Table office clk wdn

Sofa set 5 seater

Sofa set 4 seater

Locker bed side

Table 3'x3' (900 x 900 mm)

Table writing

Table dining 6 pers

Table dining 8 pers

Table office offrs wdn

Charpoy wdn double bunk

Table centre

Table bed side

Chair CBA spl w/hand rest

Chair dining long back

Rack record 6'x2'x6'

Stool dressing CB

Side board

Table dressing ladies with mirror

Table dressing gents with mirror

M/S MIR AND CO

M/S Manzoor Constructions

M/S B A Traders

M/S HARJEET ENTERPRISES