Completion of Public Auditorium at Jonai

Amount

Cost of Civil work for the construction of Auditorium Provoiding and laying in position specified grade of reinforce cement concrete ,excluding the cost of centering shuttering ,finising and reinforcement - A all work upto plinth level 5.1.21:1.53(1 cement :1.5 coarse sand (zone lll):3 graded stone aggregate 20 mm nominal size ) derived from natural source). (b)M20 grade concreete or Prop. 1:1.5:3

Reinforce cement concrete work in wall (any thickness)including attached pilasters,buttresses plinth and strings course,fillets,columns,pillars,piers,abutments excluding cost of centering ,shuttering ,finishing and reinforcement; 5.2.2: 1.5:3(1 cement :1.5 coarse sand (zone lll):3 graded stone aggregate 20 mm nominal size ) derived from natural source).

Centering and shuttering including strutting,propping etc and removal of form work for :5.9.6 Columns ,piers, abutments, pillars, post and struts

Centering and shuttering including strutting,propping etc .and removel for : 5.9.3 suspended floor,roofs,balcony and access platform

Centering and shuttering including strutting,propping etc and removal of work for: 5.9.7. Stair( excluding landings)expcept spiral-staircase.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. 2.26.1 All kinds of soil

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand)

20 mm cement plaster of mix : 13.3.1: 1:4 (1 cement: 4 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.1: 1:4 (1 cement: 4 fine sand)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.2: Sal wood

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Three track three panels sliding window with two glazed &one wire mesh pannel with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 9.147.A4.1 Using R2 series with frame (70 mm & above) x (40 mm & above ) & both glazed and fly screen sash (25 mm & above ) x (50 mm & above with zinc alloy (zamak) powder coated touch locks with hook. ( Height upto 1.2 metre).

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 11.49.3 Size of Tile 800x800 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in -Charge, in skirting risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing suface preparation for wall ,celling etc using average 1.50 mm thick plaster of paris including clearing ,rubbing with sand paper ,filling gaps, depression etc where necessary with chalk powder and plaster of paris past,making the surface even and smooth complete at all levels as specified and directed. Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Providing and applying plaster of paris putty of 2 mm thickness over plasteres surface to prepare the surface even and smooth complete.

Wall painting with acrlic emulsion paint approved brand and manufacture to give an even shade :two or more coats on new work.

Extra over item no 13.4.3 above for every emulsion painting with acrylic paints of approved brands and manifacture.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

Supply fitting fixing anodised aluminium fittings of approved make, resonably smooth,free from sharp edges and corner flaws and over defects and with counter sunk holes for screws including necessary aluminium screw etc complete.

Tower bolts

Door handles

Butt hinge

Applying priming coat: 13.50.1 With ready mixed pink or Grey primer of approved brand

25: Polishing on wood work with ready mixed wax polish of approved brand and manufacture : 13.69.1 New work

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (a) Using TATA make RHS/SHS of grade 310 conforming to relevent I.S. code 4923:1997

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.3 0.63 mm thick with zinc coating not less than 275 gm/ m²

Water Supply Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 50 mm dia

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

25 mm nominal bore, 152mm long, weighing not less than 440 gms

40 mm nominal bore, 206mm long, weighing not less than 690 gms

Drainage Providing, Fixing, testing & commissoning 6 kg/ sq. cm SWR UPVC Pipe Selfit ISI marked brand as per IS 13592 complete including solvent cement jointing & hydraulic testing the joints & pipes as mentioned in the sepcification etc. and making connection with downtake wherever required to satisfaction of engr / arch with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels. (A) 75 mm diameter (type B) (Horitzontal + Vertical)

Providing, Fixing, testing & commissoning 6 kg/ sq. cm SWR UPVC Pipe Selfit ISI marked brand as per IS 13592 complete including solvent cement jointing & hydraulic testing the joints & pipes as mentioned in the sepcification etc. and making connection with downtake wherever required to satisfaction of engr / arch with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels. (A) 100 mm diameter (type B) (Horitzontal + Vertical)

Providing & fixing PVC Multi floor trap of self cleansing design haivng water seal not less than 50mm with necessary distance piece & making connection with grating, making necessary slab/ wall holes & cutting walls, grouting with M-15 CC all around with brick masonray support of 350x350 mm up to bottom of trap etc. complete as per specifications & drawing porvided at all places, all levels & all height. (A) 110 mm inlet and 75 mm outlet (5" height)

Providing & fixing P- trap of self cleansing design haivng water seal not less than 50mm with necessary distance piece & making connection & support to bottom of trap etc. complete as per specifications & drawing porvided at all places, all levels & all height. (A) 110 mm inlet and 110 mm outlet

Providing, Fixing, testing & commissoning 6 kg/ sq. cm PVC Pipe Selfit ISI marked brand as per IS 4985 complete including solvent cement jointing & hydraulic testing the joints & pipes as mentioned in the sepcification etc. and making connection with downtake wherever required to satisfaction of engr/ arch with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels. Supreme or Equivalent. (A)40 mm diameter

Providing, Fixing, testing & commissoning 6 kg/ sq. cm PVC Pipe Selfit ISI marked brand as per IS 4985 complete including solvent cement jointing & hydraulic testing the joints & pipes as mentioned in the sepcification etc. and making connection with downtake wherever required to satisfaction of engr/ arch with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels. Supreme or Equivalent. (B)50 mm diameter

EXTERNAL PLUMBING Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

25 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm dia nominal bore

Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 80 mm dia

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 150 x 100 mm size P type

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

100 mm dia. R.C.C. pipe

150 mm dia. R.C.C. pipe

250 mm dia. R.C.C. pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Supplying, fitting, fixing and commissioning of submissible pump set (single phase) 1 HP,contrifugal pump set (single phase) 1 HP and 5000 litres LDPE tnak & 5000 litres IRP including panel board, electrical wiring. Joining, including, submessible binding rope, plumbing works including column pipe neccessity joining materials as per departmental specification and directions.

Construction of Bore well as per below detail. [A] Drilling & assembly lowering charges for 6"dia Borewell [B] Mudpit Digging Charges [C] Electro-logging Charges [D] Gravel Packing Charges (Nos. 1 Truck) [F] Air Compressor Charges [G] Chemical Water Testing (ATIRA Lab) [H] Removal of Mud from Mudpit Tanker Approx. [I] 6"dia PVC Casing Pipe "ISI" CM Heavy [J] 6"dia PVC Strainer Pipe "ISI" CM Heavy [K] 6"dia Heavy Top Cap, Bail Plug & Clamp with Nut Bolt [L] Gravel Supply ( Special Grade) (No.1 Truck) [O] 4 sqmm flat cable Jaison make [P] 2"dia Upvc heavy column pipe [Q] 2" dia Top bottom piece, G I bend, coupling, Sand guard, MS clamp with nut bolt etc., [R] Pump Installation charges

Electrification Supplying, installation testing and commissioning of APDCL 11KV overhead line including necessary insulators angles frames stay wires, 63 KVA 11/0.433 kV Distribution Transformer etc. including earthing as necessary excluding load security deposit to be deposited to concerned Power Supply Agency with APDCL/ASEB

Drawing of 11KV overhead line including necessary insulators angles frames stay wires etc. as necessary and load security deposit to be deposited to concerned Power Supply Agency with APDCL/ASEB check meter as well as permission from Power Supply Authority including liasioning with all the concerned departments etc..

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below: 1. Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor Neutral contactor for mains and generator Power socket for connections. 2. Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs. 3. Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure. 4. Indicators with alarm Load on generator. 5. Indicators Load on mains Engine fails to start . Emergency stop battery charger. The AMF Panel of following capacity AMF Control Panel for 40 KVA 3 phase DG Set

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2 x 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 x 2.5 sq. mm + 1 x 1.5 sq. mm earth wire

2 x 4.0 sq. mm + 1 x 2.5 sq. mm earth wire

2 x 6.0 sq. mm + 1 x 4.0 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

6 pin 15/16 A socket outlet

3 pin 5/6 A socket outlet

15/16 A switch

5/6 A switch

Supplying and fixing Two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc.as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module

6 Module (200mmX75mm)

8 Module (125mmX125mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30-90 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Wiring for group controlled (looped) light point/fanpoint/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

8 way (4 + 24), Double door

12 way (4 + 36), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40A FP MCB

63A FP MCB

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying with fitting and fixing 30 mA sensitivity 240/415v 50 Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5C x 70 mm2 Al XLPE Armoured Cable

3.5C x 35 mm2 Al XLPE Armoured Cable

3.5C x 25 mm2 Al XLPE Armoured Cable

4C x 16 mm2 Al XLPE Armoured Cable

4C x 6 mm2 Al XLPE Armoured Cable

4C x 4 mm2 Al XLPE Armoured Cable

Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Extra for using salt (5k and charcoal 64k in pipe earthing station pit to provide low impedance ground in locationi of high soil resistivity as and when required and specified by the dept.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator].

Premium model 1200 mm Sweep

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.

Ventil Air DB 300 mm sweep

Supplying including fitting fixing of following A.C. Wall Fan in the wall of following sweeps with making necessary connection as approved by the Deptt. As required complete and as directed by the Department

16"/400mm Mist Air/Maxx air Wall Fan

Supplying with installation testing and commissioning of Hi -- wall 3 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection with all installation necessary accessories Copper and Draing piping as approved by the Deptt.) up to 5 m between the room unit and out door unit as directed by the department.

1.5 Ton capacity

SITC of fabrication work from MS structure for other work with anchor fastner and necessary hardware with necessary welding has to be done to complete the job from ISA/ISMC/ PLATE.The job also includes to paint the structure with two coats of red oxide and two coats color of enamel paint as approved and recommended by consultant.

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.

100 mm dia

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying, installation, testing and Commission of LED recess mounted 46W LED Lighting fixtures with a nominal system lumen output of 4070 lumens and system efficacy ≥ 85 lm/W. The luminaire has color temperature of 6500K and CRI>80. The luminaire with THD<15% and PF > 0.95. The luminaire is made of specially manufactured engineering plastic housing and frame with Flat Opal diffuser. LED Chip Make : Cree/Samsung/Nichia/Everlight/Osram/Lumileds/Seoul. LM79 Reports & LM80 Reports should be submitted at the time of supply.( Approved Make : Bajaj / Philips / Shreder ) Phillips Make Model No. RS 271B LED 40 / 850 PSU-E WB or Equi. Fixtures should be with all necessary fixing accesories.

Supplying, installation, testing and Commission of LED Recess mounted 18W Round Non Integral Downlighter with a nominal system lumen output of 1450 lumens and system efficacy ≥ 85 lm/W. The luminaire has color temperature of 5700K (WH), 4000K(NW), 3000K(WW) and CRI >80. The luminaire meets IP20 rating with THD<15% and PF > 0.95. The luminaire is made of specially manufactured engineering plastic housing and frame with flat Opal diffuser. LED Chip Make : Cree/Samsung/Nichia/Everlight/Osram/Lumileds/Seoul. LM79 Reports & LM80 Reports should be submitted at the time of supply. ( Approved Make : Bajaj / Philips / Shreder ) BAJAJBPSLR 18W LED WH RD SD.. Fixtures should be with all necessary fixing accesories.

Supplying, installation, testing and Commission of LED Wall Mounted Foot Light as per Bajaj Make Model No.BLSGV 9W LED WW PRO or Equi.

Supply, Installation, Testing and Commissioning of MAIN POWER DISTRIBUTION BOARD As per Single Line Diagram Dwg No. AMC-E-SLD-01

Supply, Installation antistatic rubber mat suitable for 1.1 KV Voltage grade

Supply, Fitting Fixing of Shock Treatment Chart

Supply, Laying, Connection,Testing and Commissioning of heavy duty medium voltage cables as per Specification and IS 7098 part II, XLPE insulated, inner & outer sheathed, Screened stranded Al / Cu conductor unless or otherwise specified.The cable shall be laid as per the specification. The unit rate shall include (1) Shifting of cable from site store to place of installation. (2) Supply & fixing of cable G I clamps(With GI Screw) ,Nylon Tie, brackets, supports, route markers etc. where ever required to fix the cables safely. (3) Earthing the glands and armouring with earthing clamp and jumper and also connecting to common earth bar. (4) Testing of insulation and continuity of cable and submission of reports to the client's representative.

3.5C x 70 mm2 Al XLPE Armoured Cable

3.5C x 35 mm2 Al XLPE Armoured Cable

3.5C x 25 mm2 Al XLPE Armoured Cable

4C x 16 mm2 Al XLPE Armoured Cable

4C x 6 mm2 Al XLPE Armoured Cable

4C x 4 mm2 Al XLPE Armoured Cable

Supply installation testing and commissioning of 2 MP IP Bullet camera as per resolution 25/30fps@ 2MP, H.265+,3.6mm Lens, IR 30M Range, IP 66 (Make Dahua Or Equi.)

Supply installation testing and commissioning of 32 Channel Network Video Recorder as per 200Mbps Bit Rate Input Max (Up to 16- Ch IP Video), 2 SATA Interface, standalone 1 U Case

Supply installation testing and commissioning of 6 TB Capacity, 3.5 Inch Internal Hard Drive (Make : - Segate or Equi.)

Supply installation testing and commissioning of 6U Network Rack with Fan, Platem Power Strip included with Mounting arrangement

Supply installation testing and commissioning of 16 Port PoE Network Switch - 16 Port PoE 10/100 Mbps

Supply and Laying of Cat 6 Cable

Supply and Fixing of Junction Box box for CCTV

Supply installation testing and commissioning of 6" Ceiling Speaker 20 Watt, White, ABS High Impact Model No. L-PCP20A (Make : - Honeywell or Equi.)

Supply installation testing and commissioning of Wall Mounted Speaker - 10/5W, White, ABS High Impact - Fire resistant ABS material with curve design - Freq. response : 150 Hz - 17 Khz - SPL : 101dB / dB - Dimension (W x H x D) : 240 x 345 x 100 mm (Make : - Honeywell Model No. L-PWP10A or Equi.)

Supply installation testing and commissioning of Outdoor 2-Way Wall Mounted Speaker - Normal Power 10W - Max Power 20W - Line Voltage 70/100v - Sensitivity : - 90dB, SPL : 100dB - Freq. Response :- 100hz - 20,000hZ, HF Driver 4"x1, 1"x1 (Make : - Honeywell, Model No. : DSP6061 W or Equi.)

Supply installation testing and commissioning of 8 Zone Voice Alarm Controller - 8 Zone, Voice Alarm Controller with USB, MP3 - AM/FM Player (Includes 8 Zone button paging station)

Supply installation testing and commissioning of Power Amplifier - 480 Watt (Make : - Honeywell, Model No. : - HN-A480)

Supply & laying of copper unarmoured cable 2 Core 1.5 sqmm Cable + cable laying with Accessories (Make : - Standard)

Sanitary Work Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 17.19.2: 10 litre (full flush) capacity-coloured

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 17.28.1.1 32 mm dia

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.

Providing and fixing toilet paper holder : 17.34.1 C.P. brass

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 17.69.1 Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and Fixing 2-Way Brass Bib Tap in Polished Chrome of approved Quality and conforming to Manufactures Standards.

Providing and Fixing Health Faucet with metal hose and Holder in Polished Chrome of approved Quality and conforming to Manufacturers Standard.

Septic Tank Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 2.8.1 All kinds of soil

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concreete 1:6:12 (1 cement :6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with: cement mortar 1:6(1 cement: 6 coase sand). 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement: 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for : lintels, beams, plinth beams, girders, bressumers and cantilevers platforms.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:4 (cement: 4 coars sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)

20 mm cement plaster of mix: 1:4(cement: 4 coarse sand) 13.3.1 1:4 (1 cement: 4 fine sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

Boundary Wall Construction of Brick boundary wall including necessary earthwork in excavation for foundation trenches of walls, footing of columns including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth, 100 mm thick PCC in proportion 1:3:6 over flat brick soling, with 112 mm thick brickwork in cement mortar in proportion 1:4 with above plinth upto height of 1.60m, and providing RCC pillar of 0.20mx0.20mx 1.80 meter height above PL at 2.50 meters apart, tie beam of 0.20mx0.25m cross section, 4 nos. 12mm dia main bar for beam and 4 nos for each boundary colums and stirrups @ 150mm c/c and plastering in proportion 1:4, expansion gap of boundary wall should be maintained at 20 m interval.Column height below PL is 1.2 m height including foundation and colour washing with lime of approved brand incuding form work, shuttering and shoring all complete as per approved good for construction drawing as directed and specified by the by the deptt.

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

1) Construction of Double Leaf Heavy Duty Iron Gate at various Scheme under different MAC Constituency. Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts).

2. Construction of RCC Gate Post and Beam of 0.30 m x 0.30 m with 4-nos of 16 mm dia bar with 6 mm stirrups @ 150 c/c for each column and beam and all complete as per departmental specification and direction.

Furniture High back Auditorium chair Size of chair is 21" ctc High back chair made in polyurethene moulded foam on seat and back of 40+ density. Pushback mechanism made of high quality common rail coil spring mechanism. which will recline to about 25 deg from backside and seat will retract front and back by about 2.5". Chair frame made of metal CRC grade 1" square outer dia tube of 18 guage, powder coated in black.All other metal part sections will be made in tubular and MS patti and powder coated. Chair will be fixed with polypropelyne armrest. Armrest will be claded on top of metal frame. Each chair will be fixed with high qulity fabric which will be sctoch brite and will be fire resistant. All metal chairs will be installed by Flexi. Fixed with ankle fastners fixed with bullet machine on floor.

Instalation charge (includes labour charge and cost of ankle fastners)

Benudhar Medok (BID ID -244798)