Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | single bid₹35.0 LAccepted-Finance | ₹35.0 L | single bid | Accepted-Finance Single Bid |
Tender Value
₹14.4 L
Closing Date
9 Feb 2021, 12:30 pmClosed
Executive Engineer
Office of the Executive Engineer, Construction Division, APWD, Campbell Bay
Improvement of road works under PMGSY Batch I, 2018 19 under Nicobar District. Packg No AN02CB01 03 SW Improvement of road at Govind Nagar, Gandhi Nagar for a length of 2.96 Km Labour element Only Materials will be supplied departmentally Re Call
2021_APWD_2112_1
NIT No. 19/EE/CD/CB/2020-21
Open Tender
Miscellaneous Works
Item Rate
90 days
EE, CD, APWD, Campbell Bay
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
Exempted
11 Feb 2021
27 Jan 2021
11 Feb 2021
27 Jan 2021
9 Feb 2021
27 Jan 2021
27 Jan 2021 - 5 Feb 2021
Amount
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : a) On W.B.M. @ 0.75 Kg / sqm
2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). a) with paving Asphalt grade VG - 30 with no solvent
Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete.
Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. a) New work (Two or more coats)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .