Work of supplying, installation, testing, commissioning with O and M of CCTV Survelliance Systems at Braham Sarovar and Sanhit Sarovar at Kurukshetra.

Amount

Relaying of old Red Sand Stone Flooring : 35-40 mm thick Fine Dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone complete in all respects. (Exact Area of flooring shall be measured for Payment. Nothing extra shall be paid for flooring work in pattern / borders etc.)

Providing & Fixing Gang saw cut 30mm thick Fine Dressed Red sand Stone work (machine cut edges) for wall lining etc. (veneer work) upto any height , backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete in all respects to the satisfaction of Engineer in Charge.

Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge. (Stainless steel cramps of Hilti Make or Equivalent approved by Engineer in Charge).

Supply, Installation, Testing, Commissioning of 1/3" or better CMOS sensor, IR Dome outdoor IP Network Camera with 2.0M pixels Resolution(1920 x 1080), 25 fps or better, H.265, H.264 and M-JPEG video compression , 3.5 to 9mm varifocal lens, sensitivity colour 0.2 lux (colour)or better 0.05 lux(Mono), IR Range 30 mtr or better, 120dB WDR or better, Privacy Masking 4 zones or more, Video analytics: Tracking, line crossing detection ,Enter/leave Field, stationary / moved object ,Loitering, crowd density, follow route with all analytics included with the camera. Audio streaming: full duplex /Half Duplex, Micro SD Card slot, PoE Support, Minimum 3 streams or better, IP 66, IK10 Rated.ONVIF Profile S, CE, FCC, UL/VDS Certified i/c Bracket & other accessories for mounting etc. complete as required and as per specifications attached and as per direction of Engineer-in-Charge. Make: Avigilon/Mobotix/Bosch/Axis

Supply, Installation, Testing, Commissioning of 1/3" or better CMOS sensor, IR Bullet IP Network Camera with 2.0M pixels Resolution(1920 x 1080), 25 fps or better ,H.265, H.264 and M-JPEG video compression , 3.5 to 9mm varifocal lens, sensitivity colour 0.2 lux (colour) 0.05 lux(Mono), IR Range 30 mtr, 120dB WDR or better, Privacy Masking 4zones or better , video analytics:Tracking, line crossing detection ,Enter/leave Field, stationary / moved object ,Loitering, crowd density,follow route with all analytics included with the camera.. Audio streaming: full duplex /Half Duplex, Pre installed Micro SD Card slot, PoE support, Minimum 3 streams or better, IP66 , IK 10 Rated, ONVIF Profile S, CE, FCC, UL/VDS Certified i/c Bracket & other accessories for mounting etc. complete as required and as per specifications attached and as per direction of Engineer-in-Charge. Make: Avigilon/Mobotix/Bosch/Axis

Supply, Installation, Testing, Commissioning of 1080p HD IR PTZ Camera with 1/3" CMOS, Effective pixels 1920 (H) x 1080 (V) 1080p 25 fps or better, 30x Optical Zoom, Varifocal lens 4.5 mm–129 mm, 12X Digital Zoom, Minimum Illumination- Color: 0.15 Lux or better , B/W: 0.01 lux, IR: 0 lux; IR distance 175m internal or external ; 120 dB WDR or better , H.265, H.264, MJPEG streams, video analytics: line crossing detection,Enter/leave Field, stationary / moved object, Loitering, crowd detection, follow route, Pan Range 360° continuous, Tilt Range 0°~-90°, Presets 256, IP66, Tours, Micro SD card support, 24 individually configurable privacy masks, Dual Power options POE or External power supply, ONVIF Profiles S & G, FCC, CE, UL Certified. complete as required and as per specifications attached and as per direction of Engineer-in-Charge Make: Avigilon/Mobotix/Bosch/Axis

Supply, Installation, Testing, Commissioning of SAN system with 70TB Usable Storage. The Storage System shall have a dual controller configuration running in an active-active mode configured as a 2-Way Cluster with automatic failover capabilities in case of one controller failure. support raid levels 0,1,5,6,10 and option for distributed dynamic raid for faster rebuild. support for FC & iSCSI Host Connectivity Protocols. The Storage System shall be configured with minimum of 2 no. of universal SFP+ ports that can be used as either 16G FC or 10G iSCSI. The system should be capable to scale up to 96 drives. complete as required and as per specifications attached and as per direction of Engineer-in-Charge Make: Lenovo/Dell/HP

Supply, Installation, Testing, Commissioning of VMS database cum recording server with Video management system license for 128 cameras , Onvif profile S supported,Maps supported,3rd party cameras support via Onvif, RTSP, HTTP, Mjpeg, alarm management, user management, recording management, drag and drop, bookmark, snapshot, pop up alarm, virtual matrix functionality, quad monitor support, dual authorisation logon, email, sms notification support. VMS should be able to support 500 cameras under a single directory. Redundancy to be considered for Live, playback and exporting the videos and also for recording server for a failure of minimum of 7 days. Incase of Database server failure operator client should be able to perform live, playback and export the video footage.In case of recording server failure cameras should be able to record on storage NAS/SAN for a min of 5 days of downtime. Number of servers required for this should be considered by the OEM. complete as required and as per specifications attached and as per direction of Engineer-in-Charge Approved Make Camera OEM/Axxon/Qognify/ISS

Supply, Installation, Testing, Commissioning of server with Intel Xeon processor of 12 core CPU (for servers) with clock speed- minimum 3.0GHz, RAM 32 GB & Expandable. Windows Server 2018 or Linux based Edition .21” LED color monitors.. Minimum 3X1 TB hard disk with raid (For Server) .With Read & Write functions . LAN Interface 10/100/1000 Mbps Ethernet. PCI express graphics card. Serial, Parallel One each. Mouse Optical . USB port at front Dual. complete as required and as per specifications attached and as per direction of Engineer-in-Charge Make: HP/Dell/Lenovo

Supply, Installation, Testing, Commissioning of PC Client Intel i7 processor latest generation (for workstation) with clock speed- minimum 3.0GHz, RAM8 GB & Expandable. Window 10 or Window 2018 Server or Linux based Edition . Minimum 1TB (For Workstations)With Read & Write functions . LAN Interface 10/100Mbps Ethernet. PCI express graphics card Mouse Optical . USB port at front Dual and dual monitor support. complete as required and as per specifications attached and as per direction of Engineer-in-Charge Make: HP/Dell/Lenovo.

Supply, Installation, Testing, Commissioning of 55" LED Monitor,4K resolution, HDMI Port, 1 Digital Audio Out, complete as required and as per specifications attached and as per direction of Engineer-in-Charge Make: Sony/LG/Samsung/Christie

Supply, Installation, Testing, Commissioning for Layer-3 switch SFP port Switch should have total 22 Nos. Gigabit port including 2 Nos. Open SFP slot (Gigabit) and 2 Nos. of Combo GbE ports (GbE) ports and 2 nos of SFP+ port with upgradable upto 10G in future with licence. The Switch should have Non-blocking wire speed switch fabric, should have Min. 128Gbps.The Access Switch should support basic Layer 3 features like static routing, RIP v1 and v2 for IPv4 and RIPng for IPv6 and VRRP from day 1.The Access Switch Should be EAL2/EAL3/NdcPP certified. complete as required and as per specifications attached and as per direction of Engineer-in-ChargeMake : Alcatel/Cisco/Extreme

Supply, Installation, Testing, Commissioning of Layer -2 switch 24-port Gigabit managed switch POE with 4 SFP combo Port.Switch should support Web based authentication provides network admission control through web browser to any host devices and operating systems. The features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) above work together to prevent DOS attacks in the network, thereby increasing network availability. PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN, supports multiple uplinks. The ability to lock Source MAC addresses to ports, and limits the number of learned MAC addresses. Support for up to 512 rules switch should have POE plus port and power capacity of 370 watt. complete as required and as per specifications attached and as per direction of Engineer-in-Charge Make : Alcatel/Cisco/Extreme

Supply, Installation, Testing, Commissioning for Layer-2 managed 8 x Gigabit Port, 4 x SFP Port switch should have Switching capacity 24 Gb or better. Switch should be managed and Redundant power supply inputs with standard 1x 3 terminal block. switch have alarm relays to connect external alarm systems for security provision. switch should support the Dynamic Host Configuration Protocol, (DHCP) relay for IPv4/IPv6, IEEE 802.1AB Link Layer Discover, Protocol (LLDP) with Media Endpoint Discover (MED) extensions, Network Time Protocol (NTP), DHCPv4 and DHCPv6 server .Multiple VLAN Registration Protocol (MVRP). Switch should have power budget of 130 watt or higher. complete as required and as per specifications attached and as per direction of Engineer-in-ChargeMake : Alcatel/Cisco/Extreme

Supply, Installation, Testing, Commissioning of Single mode fiber module with with 1000 base ( Module should be of same OEM as quoted for switch) complete as required and as per direction of Engineer-in-Charge

Supply, Installation, Testing, Commissioning of STP Cat 6 Cable Armoured, Transmission frequency of 250 MHz (Minimum),cable Should be 4 pair and Cable should be Fire Retardant. Cat6 cable should be protected with anti rodent gel in outer sheath. complete as required and as per specifications attached and as per direction of Engineer-in-Charge Make: R&M/Systimax/Seimon

Supply, Installation, Testing, Commissioning UTP Field Termination Connector IP20 Connection type Toolless Insulation Displacement Connection Category Cat 6 UTP, IP Class IP 20 rated, Certification UL Listed General Specs . complete as required and as per specifications attached and as per direction of Engineer-in-Charge. Make: R&M/Systimax/Seimon

Supply, Installation, Testing, Commissioning of OFC Armoured outdoor SINGLE MODE 12 CORE - OS2 . Should be ISO.IEC 11801 - 2nd Edition, type OS2 and ITU-T REC G 652D. Tube Idenification :Single tube/Multiple tube. Fibre protection (Tube) : Polybutylene Terephthalate (PBT). Water Blocking :Thixotropic Gel (Tube) and Petroleum Jelly (Interstices). Core Wrapping : Polyethylene Terephthalate . Armouring : Corrugated Steel Tape Armour (ECCS Tape). Strength Member: Two Steel wires on periphery/Two FRP rods on periphery /Central Strength Member FRP. Sheath : UV Stabilized Polyethylene (HDPE). Maximum. Tensile Strength-Short Term : 1500N or better. Mass (Nominal) : minimum 95 kg/km complete as required and as per specifications attached and as per direction of Engineer-in-Charge Make: R&M/Systimax/Seimon

Supply, Installation, Testing, Commissioning for 12 Port fiber LIU which have sufficient slots to accommodate 12/24 Duplex LC/SC Ports ,Should have fiber management provision inside with splice tray and other accessories, Should be rack mountable 1U,Should have Splice holder for minimum 12 Fiber cores ,Should be made of Cold Rolled Steel ,Material Should steel: 1.5 mm, powder-coated complete as required and as per specifications attached and as per direction of Engineer-in-ChargeMake: R&M/Systimax/Seimon

Supply, Installation, Testing, Commissioning for 24 Port fiber LIU which have sufficient slots to accommodate 24/12 Duplex LC/SC Ports ,Should have fiber management provision inside with splice tray and other accessories, Should be rack mountable 1U,Should have Splice holder for minimum 24 Fiber cores ,Should be made of Cold Rolled Steel ,Material Should steel: 1.5 mm, powder-coated complete as required and as per specifications attached and as per direction of Engineer-in-Charge.Make: R&M/Systimax/Seimon

Supply, Installation, Testing, Commissioning for optical fiber patch leads shall comprise of Single mode category Jacket should be spiral metal anti rodent protection, Connector: Zirconia ceramic ferrule,Conector type Duplex LC-LC with length of 2 mtr..complete as required and as per direction of Engineer-in-Charge Make: R&M/Systimax/Seimon

Supply, Installation, Testing, Commissioning for fiber adaptor which have LC Duplex singlemode adapter with Quick mounting clip integrated.Protection class of IP-20 rated with Material :fiber- (halogen-free ) complete as required and as per direction of Engineer-in-Charge. Make: R&M/Systimax/Seimon

Supply, Installation, Testing, Commissioning for fiber pigtail which have Connector type LC, Fiber Type SM OS2,Compact design (SFF). 1.25 mm ferrule technology, Length 1meter/1.5 meter. complete as required and as per direction of Engineer-in-Charge. Make: R&M/Systimax/Seimon

Supply, Installation, Testing, Commissioning for 9U outdoor IPV5 rated rack with 2 side FAN with 5 socket PDU with 15 AMP DP for power surge safty. With pole mount accessories. Rack should be certified. complete as required and as per direction of Engineer-in-Charge.Make: Valrack,Netrack,Comrack

Supply, Installation, Testing, Commissioning for 37U indoor rack with 800X800 high density rack with framework with 2 Horizental and 2 Vertical channel with 4 FAN tray roof cabinet. 1 Top Cover and 1Bottom Cover with gland plate and rubber grommets for cable entry provisions,4 Recess mounting angles, with PVC cable separation cable manager. Rack should be certified. complete as required and as per direction of Engineer-in-Charge. Make: Valrack,Netrack,Comrack

Supply, Installation, Testing, Commissioning for splicing and Optical connectivity test report for per core of OFC. complete as required as per direction of Engineer-in-Charge

Supply, Installation, Testing, Commissioning of HDPE pipe 32mm. complete as required as per direction of Engineer-in-Charge

Supply, Installation, Testing, Commissioning of PVC Conduit 32mm complete as required as per direction of Engineer-in-ChargeMake: Diplast, Polyplast, Prince

Supply, Installation, Testing, Commissioning of 3core 1.5sqmm power cable. complete in all respect as per satisfaction of Engineer-in-chargeMake: Havells, Polycab, Finolex

Soft and hard soil moiling for fiber cable, underground laying of cable with machine. complete in all respect as per satisfaction of Engineer-in-charge

Supply, Installation, Testing, Commissioning of MS Decorative Pole 32mm dia 5meter height including cost of cement concrete etc. complete in all respect as per satisfaction of Engineer-in-charge

Supply, Installation, Testing, Commissioning of 10KVA Online UPS with 50-60 mins backup. True Online configuration with double conversion UPS & Zero transfer time. Overall Efficiency (AC to AC) - Online (Double Conversion) Upto 95%(on 100% load) complete as required as per direction of Engineer-in-Charge. Make: VERTIV/DELTA/APC-SCHNEIDER

Bidder Name

Amount

Insat Techno Services

Supreme Audiotek Pvt. Ltd.

Digital Controls and Automation

Online Micro Services Private Limited

Digital Controls and Automation

Insat Techno Services

Online Micro Services Private Limited

Insat Techno Services

Digital Controls and Automation

Online Micro Services Private Limited