Liquid Waste Management Scheme At Puluj Tal.Pandharpur Dist.Solapur

Sub Work : COMMUNITY LEATCH PIT Big (No of Units- 12) Item No 1- Excavtion for foundation in earth, soil of all type , sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Item No 2- Excavation for foundation in Hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum, watering, ramming, etc. complete. (Lift upto 1.5m) By Mechanical Means

Item No 3-Providing and laying Cast in sita/Ready Mix cement concrete in M-10 of trap/ granite quartzite geiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drumm Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No 4- Providing and laying Cast in situ/ Ready Mix cement concrete in M15 of trap/ granite/ quartzite/ gneiss metal for steps including steel centering, form work, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombeds urface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for renderin guneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enable dreversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete. Withfine aggregate (Crushed sand VSI Grade)

Item No.5- Provinmding Secound class burnt brick masonry with converntional / I.S type brick in cement mortal 1:6 in plints as backing in composite masonry including bailing out water manually, striking, joints, raking out joints and watering etc complete

Item No 6- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No 7- The buffalo ball of Shahabadi floor, which is loose at the bottom in the middle of the silt (market rate)

Item No 8- Providing and laying Cast in sita/Ready Mix cement concrete M-20 of trap/ granite quartzite gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minunnum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc complete (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer! concrete Batch max plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No 09- for Chember PVC Pipe 140 mm/ 4kg/cm2

Tee 140 mm/ 4kg/cm2

Sub Work : COMMUNITY LEATCH PIT Small (No of Units- 63) Item No 1- Excavtion for foundation in earth, soil of all type , sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Item No 2- Excavation for foundation in Hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum, watering, ramming, etc. complete. (Lift upto 1.5m) By Mechanical Means

Item No 3- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thickincluding hand packing and compacting etc. complete.

Item No 4- Providing soling using Aggregates/ metal 40 mm to 75 mm size trap metal in 75 cm. layer including filling

Item No 5- Provinmding Secound class burnt brick masonry with converntional / I.S type brick in cement mortal 1:6 in plints as backing in composite masonry including bailing out water manually, striking, joints, raking out joints and watering etc complete.

Item No 6- Providing ISI standard RCC pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, including all statutary duties and taxes such as GST levied by Gol and GoM in all respect, inspection charges, transport to departmental stores/site, unloading and stacking etc. complete as per IS-458/1988 Note- One collar should be supplied with each full length plain ended RCC pipe, cost including in rates below. One rubber ring should be supplied with each full length of socketed pipe, cost included in rates below.900mm dia NP-2

Item No 7- Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1.1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar.) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc complete as directed by Engineer-in-charge (For all class of pipes) as per IS-783- 1985. 900mm dia NP-2

Item No 8- Providing and Fixing R.C.C. cover on Round Tank 1000 mm dim, etc complete. As Per Market Rate

Item No 9- Provinding And Fixing and supling PVC Pipe 75 mm/ 4kg/cm2

Item No 10- Tee 75 mm/ 4kg/cm2

Item No 11- Providing flush grooved pointing with cement mortar 1:3 for brick work including scaffoldingand curing etc. complete.

Sub Work : DEWAT PLANT FOR GRAY WATER MANAGEMENT (No of Units- 2) INLET CHEMBER Section D Item No 1- Excavtion for foundation in earth, soil of all type , sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Item No 2- Excavation for foundation in Hard murum and boulders including removing the excavated material up to a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means

Item No 3- PCC Providing and laying Castinsitu/ Ready Mix cement concrete in M15 oftrap/ granite/ quartzite/ gneissmetal for steps including steel centering, form work, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled rever sible Drum Typemixer/ concrete Batch mixp lant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No.4- Provinmding Secound class burnt brick masonry with converntional / I.S type brick in cement mortal 1:6 in plints as backing in composite masonry including bailing out water manually, striking, joints, raking out joints and watering etc complete

Item No 5- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No 6- Providing external cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No 7- Providing srtuctural steel work in rolled section like joints, channels, angel, tree etc.as per detailed designs and drawing including fixing in (excluding cost of structure stell)

Tmt FE 500 reinforcement

PRIMERY SETLLING Section C Item No 1- Excavation for foundation/ pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, prepring, the bed for foundation and necessry back filling, ramming watering including shoring and strutting etc complete. (Lift upto 1.5 m.) By Mechanical Means

Item No 2- Excavation for foundation in Hard murum and boulders including removing the excavated material up to a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means

Item No 3- PCC Providing and laying Castinsitu/ Ready Mix cement concrete in M 15 oftrap/ granite/ quartzite/ gneissmetal for steps including steel centering, form work, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled rever sible Drum Typemixer/ concrete Batch mixp lant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No.4- Provinmding Secound class burnt brick masonry with converntional / I.S type brick in cement mortal 1:6 in plints as backing in composite masonry including bailing out water manually, striking, joints, raking out joints and watering etc complete

Item No 5- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No 6- Providing external cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No 7-Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, coverblocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled rever sible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No 8- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Item No 9- Provinding And Fixing and supling PVC Pipe 110 mm/ 4kg/cm2 for inlet and Outlet

Item No 10- Provinding And Fixing and supling PVC Pipe 75 mm/ 4kg/cm2 for gas Pipe

SECONRY SETLLING Section A + B Item No 1- Excavation for foundation/ pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, prepring, the bed for foundation and necessry back filling, ramming watering including shoring and strutting etc complete. (Lift upto 1.5 m.) By Mechanical Means

Item No 2- Excavation for foundation in Hard murum and boulders including removing the excavated material up to a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means

Item No 3- PCC Providing and laying Castinsitu/ Ready Mix cement concrete in M 15 oftrap/ granite/ quartzite/ gneissmetal for steps including steel centering, form work, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled rever sible Drum Typemixer/ concrete Batch mixp lant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No.4- Provinmding Secound class burnt brick masonry with converntional / I.S type brick in cement mortal 1:6 in plints as backing in composite masonry including bailing out water manually, striking, joints, raking out joints and watering etc complete

Item No 5- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No 6- Providing external cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No 7-Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, coverblocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled rever sible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No 8- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Item No 9- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 150 mm to 200 mm size trap metal including filling

Item No 10- Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/ grit, ramming, watering etc. complete

Item No 11- Provinding And Fixing and supling PVC Pipe 110 mm/ 4kg/cm2 for inlet and Outlet

Elbow 110 mm/ 4kg/cm2

Item No 12- Provinding And Fixing and supling PVC Pipe 75 mm/ 4kg/cm2 for gas Pipe

PLANTED BED 1 & 2 Item No 1- Excavation for foundation/ pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, prepring, the bed for foundation and necessry back filling, ramming watering including shoring and strutting etc complete. (Lift upto 1.5 m.) By Mechanical Means

Item No 2- Excavation for foundation in Hard murum and boulders including removing the excavated material up to a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means

Item No 3- PCC Providing and laying Castinsitu/ Ready Mix cement concrete in M15 oftrap/ granite/ quartzite/ gneissmetal for steps including steel centering, form work, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled rever sible Drum Typemixer/ concrete Batch mixp lant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No.4- Provinmding Secound class burnt brick masonry with converntional / I.S type brick in cement mortal 1:6 in plints as backing in composite masonry including bailing out water manually, striking, joints, raking out joints and watering etc complete

Item No 5- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No 6- Providing external cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No 7- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 150 mm to 200 mm size trap metal including filling

Item No 8- Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/ grit, ramming, watering etc. complete

Item No 9- Providing and supply Aggregates 20 mm nominal size

Item No 10- Plantation

CLEAR WATER TANK Section E Item No 1- Excavation for foundation/ pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, prepring, the bed for foundation and necessry back filling, ramming watering including shoring and strutting etc complete. (Lift upto 1.5 m.) By Mechanical Means

Item No 2- Excavation for foundation in Hard murum and boulders including removing the excavated material up to a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means

Item No 3- PCC Providing and laying Castinsitu/ Ready Mix cement concrete in M15 oftrap/ granite/ quartzite/ gneissmetal for steps including steel centering, form work, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled rever sible Drum Typemixer/ concrete Batch mixp lant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No.4- Provinmding Secound class burnt brick masonry with converntional / I.S type brick in cement mortal 1:6 in plints as backing in composite masonry including bailing out water manually, striking, joints, raking out joints and watering etc complete

Item No 5- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No 6- Providing external cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No.7:- providing supplying MS sheet and angal fabricated board with size 0.90 Mt.X 1.20 Mt. with 3.0 Mt. angal legs including fixing in concrete and painting as per instructions.(lumsum Amt. with local rates)