E-TENDER FOR RENOVATION AT PHYSIOTHERAPY BMHRC

Part-A (Civil Work):

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete,to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground,all complete as per direction of Engineer-in Charge. For door/window/clerestory window.

Demolishing mosaic flooring & cement concrete including disposal of material with in 50 mtrs. Lead :

Dismantling tiles in walls with mortar laid in cement mortar including stacking material within 50 metres lead

Disposal of building rubbish/ malba/similar un-serviceable, Dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved Municipal dumping ground or as approved by Engineer -in- charge,beyond 50 m initial lead, for all leads including all lifts involved. Same as item no. 15.2.1

Providing and laying in position cement concerete of specified grade excluding the cost of centering and shuttering-All work up to plinth level: 1:2:4 ( 1 Cement : 2 coarse sand ( Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in Super Structure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:6 ( 1 cement : 6 coarse sand).

12 mm cement plaster of mix 1:6 ( 1 cement : 6 coarse sand)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm of 1st quality conforming to IS : 15622 of approved make in colours such as White,Ivory,Grey,Fume Red Brown, laid on 20mm thick cement mortar 1:4, Jointing with greycement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigment etc, complete.Toilet

Providing and fixing 1st quality Ceramic glazed floor tiles conforming to IS : 15622 of approved make in call colours ,shades except burgundy,bottle green black of any size as approved by Engineer-in-charge in skirting,risers of steps and dados over 12mm thick bed of Cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing & laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS : 15622,of approved brand & manufacturer,in all colors and shades laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete. Glazed Vitrified Tiles Matt/Antiskid Finish of Size Size of the tile 600x600 mm

Providing & applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Ceiling

Distempering with 1st quality acrylic distemper having VOC content less than 50gms. Oil Bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats )

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. Sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25mm wide x 1.6 mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceilling with dash fastener 12.5 mm dia. X 50mm long with 6mm dia. bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. Channels 45x15x0.9 mm. running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. Intermediate channel with connecting clips made out of 2.64 mm dia x 230mm long G.i. Wire at every junction, including fixing perimeter channels 0.5mm thick 27 mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with help of dry wall screws of size 3.5 x 25 mm at 230mm c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacture's specification and also including the cost of making openins for light fitings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I

Providing & fixing white vitreous china pedestal type water closet (E.W.C) with seat and lid,10 litre low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors where required. W.C pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps,32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China wash basin size 550 x 400 mm with a pair of 15mm C.P brass pillar taps

Providing & fixing PVC waste pipe for sink or washbasin including PVC waste fittings complete. Flexible pipe 40mm dia.

Providing and fixing 8 mm dia C.P / S.S Jet with flexible tube upto 1 metre long with S.S triangular plate to European type W.C of quality and make as approved by Engineer -in-charge.

Providing & fixing aluminum work for doors,windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285,fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions,1.e. At top,bottom and sides with required EPDM rubber/neoprene gaskets etc.. Aluminum sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminum Snap beading for glazing/paneling,C.P brass/stainless steel screws,all complete as per architectural drawings and the direction of Engineer -in-charge. Glazing,paneling and dashfasteners to be paid for separately.: For fixed portion. Powder Coated aluminium ( aluminum Thick ness of powder coating 50 micron)' Pipe

For shutters of doors,windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required ( Fittings shall be paid for separately) Powder Coated aluminium ( aluminum Thick ness of powder coating 50 micron)'

Providing & fixing 12mm thick pre- laminated particle board flat pressed three layer of graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors,windows shutters and partition frames with C.P brass/ stainless steel screws etc. complete as per directions of engineer – in – charge. Prelaminated particle board with decorative lamination on other side .

Providing & fixing glazing in aluminium door,window,ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings & the directions of the engineer -in- charge With Float glass panes of 5.0mm thickness

CPVC Pipe 20mm Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent

CPVC Pipe 20mm Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent

Providing and fixing C.P brass bib cock approved quality IS 8931 15 mm nominal bore

Providing and fixing C.P brass angle valve for basin mixer & geyser points of approved quality conforming to IS 8931 , 15 mm nominal bore

Providing & fixing mirror of superior glass ( Of approved quality) complete with 6mm thick hardboard backing with C.P brass screws & washers complete and of required shape and size. Rectangular Shape above 2 sqm

Sub Total Amount

Part-B (Electrical Work):

Wiring for light point/fan point/exahust fan point/call bell pointwith 1.5 sqmm FRLS PVC insulated conductor single care cable in surface/recessed Medium class PVC conduit, with modular switch,modular plate, suitable Gl box and earthing the point with 1.5 Group A

wiring for light/power plug with 4x 4 sqrim FRLS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit along with 2 No. 4 sqmm FRLS S PVC insulated copper conductor single core cable for loop earthing as required.

wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC Insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2x1.5 sqmm +1x1.5 sqmm earth wire

wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC Insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2x4 sqmm + 1x4 sqmm earth wire

supply and fixing suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular switch connection etc.as required.

supplying and fixing 20 A 240 V,spn Industrial type shocket outlet with 2 pole and earth metal enclosed plug top along with 20 A e curve SP, MCB insheet steel enclosure on surface or in recess, with chained metal cover for the socket out let and complete

Supplying and fixing of recessed mounting LED panel 2'x2,36 W 3600 lumens standard brand.

Supplying and fixing 5 A to32 A rating 240/415 V, 10 KA "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required. Single pole

Supplying and fixing 5 A to32 A rating 240/415 V, 10 KA "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required. Triple pole and neutral

Supplying and fixing following way, single pole and neutral theat steal, MCB distribution board 240 V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar,dinbar, Interconnections poweder painted Including earthing etc. as req 16 Way, double door

Supply and fixing following ways surface/ recess mounting vertical type 415V TPN MCB distribution board of sheet steel, dust protected, duly power painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBS. 8Way (4+24) double door

Sub Total Amount Part-B (Electrical work)

Total Amount of Part- A & B (Civil & Electrical work)

GST applied on the Subtotal Amount (As mentioned in S.No. 2.13 of Col. No. 8)

M/s Renuka Enterprises