Construction of Buildings under Chief Minister Amrutha Nagarothana(Municipality) Project Phase 04 in Madhugiri TMC Limits. ( change of AP)

Construction of Buildings under Chief Minister Amrutha Nagarothana(Municipality) Project Phase 04 in Madhugiri TMC Limits. ( change of AP)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of uildings & bridges and such simillar works in all kinds of soils, as per dra...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Granite stone slab 100 mm and 150 mm thick (un-dressed) ---- etc.,complete including all lead and lift as per the instructions of officer in charge.

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing Structural Steel work riveted, bolted or welded built up sections, trusses and framed work, including cutting, hoisting, fixing in osition and applying a priming coat of approved ...

Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L ooks,bolts and nuts 8mm. dia C.I plain and bitumen washers ov...

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm (0.2 mm), corners of the door frame to...

Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing sc...

White washing with lime to give an even shade :Old work (two coats) as per specifications and as per directions of Engineer in charge. ---- etc.,complete including all lead and lift as per the instruc...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per s...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Painting work Finishing walls with Acrylic Smooth exterior paint of required ...

Demolishing of Brick work. Demolishing brick work manually/ by mechanical means including stacking of se...

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. -...

SSM Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc.,complete including all lead and lift as per the instructions of ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Formwork for Foundation

As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.

For Foundation works consider 8%...

Formwork for PLINTH BEAM

As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.

For Plinth beam works consider 5...

Formwork for PLINTH BEAM

As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.

For Plinth beam works consider 5...

Formwork for ROOF BEAM

As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.

For Plinth beam works consider 60%...

Formwork for ROOF BEAM

As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.

For Plinth beam works consider 60%...

Formwork for ROOF BEAM

As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.

For Plinth beam works consider 60%...

Formwork for Coumns Sub structure

As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.

For Plinth beam works c...

Formwork for Coumns Super structure

As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.

For Plinth beam works...

Formwork for ROOF Slab

As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.

For Plinth beam works consider 50%...

Formwork for ROOF Slab

As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.

For Plinth beam works consider 50%...

Supplying, Fitting and Placing Thermo-Mechanically Treated bars of grade Fe-550 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

BBM Providing Brick work with common burnt clay Non Modular bricksof class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 c...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Painting work Finishing walls with water proofing cement paint of required sha...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dr...

Providing and fixing 1mm thick M.S. sheet door with frame of40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primin...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.((125mm)) ---- etc.,complete including all lead and lift as per the instructions of officer in charg...

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : ---- etc.,complete including all lead and lift as per the instructions of off...

Providing and fixing chromium plated brass handles of 100/125 mm with

necessary screws etc. complete ---- etc.,complete including all lead and lift as per the instructions of officer in charge.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complet ---- etc.,complete including all lead and lift as per the instructions of officer in char...

Providing and fixing door latch with necessary screws etc complete.

12.80.1 Bright finished brass latch ---- etc.,complete including all lead and lift as per the instructions of officer in charge.

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 10" x 7" x 3" (...

Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of...

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

Supplying heavy gauge PVC Conduit Pipe ....dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hook sand ...

Supplying and fixing PVC/metal conduit Deep junction box ---- etc.,complete including all lead and lift as per the instructions of officer in charge.

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall -...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. ---- etc.,complete including all lead and...

Supplying And Fixing Metal Fan Box with Round Hook. ---- etc.,complete including all lead and lift as per the instructions of officer in charge.

Point wiring Copper without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated., 2x1.5 Sqm. ...

Point wiring Copper without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS PVC insulated., 2x1.5 Sqm. ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to I...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch ---- etc.,complete including all lead and lift as per the i...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch ---- etc.,complete including all lead and lift as per the inst...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16A One Way Switch ---- etc.,complete including all lead and lift as per the ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket ---- etc.,complete including all lead and lift as per ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module ---- etc.,complete including all lead and l...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket ---- etc.,complete including all lead and lift as per th...

Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70percentage lumen maintenance with CRI greater than 80. Power Input: 220to240V a...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying & fixing of Porcelain fuse channel with cut out onexisting wooden/panel using necessary nuts, bolts and washers. ---- etc.,complete including all lead and lift as per the instructions of off...

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg ---- etc.,complete including all lead and lift as pe...

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg eac ---- etc.,complete including all lead and lift as per the instructions of officer in charge.

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag ---- etc.,complete including all lead and lift as per the instructions of officer in charge.

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage Sumps with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow ...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

KSRB13-8.1 : Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/sq.cm working pressure outside diameter with special flange, compression type fittings, wall clip...

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 ---- etc.,complete including all lead and lift as per the instructions of officer in charge.

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc.,complete including all lead and lift as per the instructions of officer ...

Supplying, Fitting and Placing Thermo-Mechanically Treated bars of grade Fe-500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications...

Flooring work Providing and laying vitrified floor tiles in different sizes ...

Glazing for Ventilators Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural draw...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded P...

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. ---- etc.,complete including all lead and lift as per the instructions of officer in charge.

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includ...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

Providing and fixing 100 mm sand cast Iron grating for gully trap.rge. ---- etc.,complete including all lead and lift as per the instructions of officer in charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board groundfixed to wooden cleats with C.P. brass screws and washers complete...

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. ---- etc...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...