SPECIAL REPAIR TO BLDG NOS TS441 PS274 TS507 STORE AND TS508 TOILET AND ADDITION ALTERATION OF CLASS ROOMS OF ARMY PUBLIC SCHOOL UNDER GE NAGROTA

Amount

(SCHEDULE A (PART-I) Demolition of brick work of stone / boulder masonry laid drycomplete all as specified and directed.

Dismantling of Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation of Boards/Slap /Blankets, any thick-ness with frame work including Cover Fillets Cornices etc. and Serviceable Ceiling Board and Cover Fillets, etc., keep in Safe Custody for re-use, complete all as specified and as directed.

Taking down cement plaster of any description on Brick Walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc complete all as specified and as directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Dismantling Plain or Corrugated steel sheeting, any guge, thickness in roof covering and removing from site of work complete all as specified

Demolition of cement concrete (unreinforced) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.complete all as specified and as directed

Taking down chowkat or frames with shutter (without taking off shutter from the frame) area n exc 1.5 Sqm each complete with hold fasts etc. complete all as specified and as directed

Taking down chowkat or frames with shutter (without taking off shutter from the frame)area exc 1.5 Sqm but n.exc 4.0 Sqm each complete with hold fasts etc. complete all as specified and as directed

Taking down or up steel 20mm bore water tubing and connections including cleaning for re fixing complete all as specified and as directed

All as per item no 11 above but 15mm bore

Demolition and breaking up 100mm bore AC / RCC / PVC pipes incl all fitting complete all as specified and as directed

Demolition of cement concrete (unreinforced) ground floor to 3rd floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr complete all as specified and as directed

M&L brick work with sub class B well burnt bricks straight or curved on plan exc 6m redius built in CM 1:6 complete all as specified and as directed

Rendering 15mm thick in cement mortar 1:6 on INTERNAL fair faces of Brick walls or on concrete surfaces, finished even and smooth W/O using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick in cement mortar 1:4 on EXTERNAL fair faces or Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement with WPC as per manufactare instruction complete all as specified and as directed

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and dircted.

M&L for rendering 5 mm thick rendering in CM(1:3) on concrete surface as in ceiling/chajja complete all as specified and as directed

Supply only Liquid water proofing compound complete all as specified and as directed

M&L Preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm on walls over 2mm thick plaster of paris putty as specified and directed by Engr-in-Charge.

M&L Preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil bound distemper on walls over 2mm thick plaster of paris putty as specified and directed by Engr-in-Charge.

M&L Preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 2mm thick plaster of paris putty as specified and directed by Engr-in-Charge.

M&L Preparation of newly plastered surfces of walls and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick complete all as specified and as directed

M& L for Complete removal of existing treatment from external surfaces (any number of coats) of walls by steel wire brushing and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and applying 3 mm thick wall putty and one coat of primer and two coats of oil emulsion distemper white or tined on wall upto three storie building complete all as specified. Note:- Shade of the OBD shall be approved by GE.

M & L for Preparation of old plastered surfaces of ceiling and applying two coat of white washing complete all as specified and as directed

M&L for three coats of white washing on newly prepared ceiling surfaces incl preparation of surfaces complete all as specified and as directed

M & L for Preparing surfaces plastered or unplastered Complete removal of existing treatment and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.complete all as specified and as directed

M& L for Preparing surfaces plastered or unplastered Complete removal of existing treatment and applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).complete all as specified and as directed

S & F 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed

S & F Anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed

M & L POP 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed

S & F 5mm thick Printed PVC sheet used instead of plain colour PVC shectplain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site.complete all as specified and as directed

M & L Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 15mm thick 1:6 cm screed bed for laying the floor finishes. complete all as specified and as directed

M & L Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 10mm thick 1:4 cm screed bed for laying the floor finishes. complete all as specified and as directed

M & L Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1:6 complete all as specified and as directed

M & L glazed coloured ceramic coloured tiles of size 350x 250x 7mm/ 450X 350X 7mm set and jointed in white or coloured cement to match on vertical surfaces such skirting ,dados, rises to steps etc over 15mm thick rendering in cement mortar in 1:6 complete all as specified and as directed

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.00Kgs of cement per Sqm. complete all as specified and as directed

M&L for Machine cut kota stone flooring 18-20 mm khick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 Kg/Sqm of surface. complete all as specified and as directed

M&L for Machine cut kota stone slab 18-20mm thick in skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) over 15 mm thick rendering in CM ( 1:4) including taking out of existing dado. complete all as specified and as directed

M&L for 75mm PCC 1:4:8 type D2 (40mm graded aggregate) in sub base. complete all as specified and as directed

S/F mild steel trusses (framed) purlins, rafters, crane gantries, rails and fastenings and heavy brackets framing (Beam,tee,angle,channel or flat sections)including distance pieces, cleats etc conforming to Fe-410-W Gde- E- 250 (qualaity B) complete all as specified and as directed

S & F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters,walk ways, railings, framework of water tanks and similar works conforming to Fe-290 Gde E 165. complete all as specified and as directed

S& F 0.50mm thick Pre painted galvalume alluminium zinc coating GI based corrugated steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified and as directed

M & L for Preparing new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide complete all as specified and directed.

M & L for Preparing old steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Providing, cement concrete Type B-0 (1:2:4) (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and dircted.

M & L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces.complete all as specified and dircted.

M&L Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces.complete all as specified and dircted.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

M & L for Applying one coat of aluminium paint on top of APP membrane.

S& F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed

S&F Anodised aluminium frame section Powder coated 100x50 mm for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F Toughned glass 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.complete all as specified and directed

S&F Double action floor spring hydraulically regulated made up of stainless steel foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for toughen glass shutters complete all as specified and directed

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed

S&F 100mm long butt hinges (medium weight) colled rolled mild steel fixed with welding.complete all as specified and directed

S& F 140 mm size Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring ,fixed in floor overall length of cover plate complete all as specified and directed

S&F Extruded aluminium alloy handles fabricated type anodised of size 125mm long 12mm dia. complete all as specified and directed

S&F 250mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.complete all as specified and directed

S&F Aluminium anodized 150mm long barrel tower bolt of extruded section and fixed.complete all as specified and directed

S & F Box type Steel windows with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing Complete all as specified and directed

M&L for 40mm thick Flush shutters solid core construction with block boad core and plywood face panels commerical type with decoratve face veneeron both face with lipping seasoned and chemically pressure treated complete all as specified and directed.

S&F 19mm thick solid PVC board prelaminated one side and other side plain as in cupboard shutter ( Board must be water proofing ,termite proof) .complete all as specified and directed

M&L for Block boards 18/19mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work. complete all as specified and directed

M&L for 30 mm width flange Continuous (piano) hinges mild steel bright finish or electro galvanised complete all as specified and directed

M&L for Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces.complete all as specified and directed

S&F Galvanised mild steel wire cloth 0.457mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples complete all as specified and directed

S&F Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.in each pane complete all as specified and directed

S&F Hasp and staple Alumnium anodised lncluding bolt to hinges plate 100mm size complete all as specified and directed

M&L 20mm bore medium grade steel tubing galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

M&L 15 mm bore medium grade steel tubing galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

M& L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed

S&F Bib cock with wall flange15mm bore Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections, complete all as specified.

S&F angular stop cock 15mm bore fancy type Chromium Plated with wall flange complete all as specified.

S&F Vitreous china wash down water closet pan (pedestal pattern) wall hung EWC (size-370x510x360mm) including PP Soft close seat cover, hinges, accessories set and all fittings complete all as specified and directed.

S&F white vitreous china counter wash hand basin, of size-410X910X150mm fixed in granite counter by making suitable size hole, new brackets, 32mm dia brass chromium plated waste coupling, CP botle trap complete all as specified and directed

S&F health faucet with 1 meter long easy flex tube in chrome finish & wall hook, complete all as specified

S&F Metropole flush valves 32 mm size (concealed body) with exposed shut off provision, round SS plate fixed in position and connecting complete all as specified.

S & F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

S & F in repair CP toilet paper holder with flap and fixed in position.complete all as specified and directed

M & L CP towel rail of 20 mm dia 60 cm long fixed in repair. complete all as specified and directed

M & L CP towel ring complete fixed in repair.complete all as specified and directed

M & L CP soap tray fixed in wall complete all as specified

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete Make- Jaquar Cat No - CAN-1173

S & F PVC (SWR) pipe 110mm bore single in any type with rubber ring joint laid in wall/trenches /floor. complete all as specified and directed

S & F PVC (SWR) bend any radious 110mm bore complete all as specified and directed

S & F PVC (SWR)gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs complete all as specified and directed

S & F PVC(SWR) reducers 75/110mm bore complete all as specified and directed

S & F 100mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S & F PVC (SWR) 110mm Junction single (single T) equal or unequal. complete all as specified and directed.

S & F PVC (SWR) pipe 75mm bore single in any type with rubber ring joint laid in wall/trenches / floor. complete all as specified and directed.

S & F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F for PVC (SWR) floor/ nahani trap 75mm bore with gratings including Jointing to waste pipe with solvent cement . complete all as specified and directed.

S & F rotational moulded 1000 lit capacity polythelene water storage tanks ( cylindrical verticle with closed top) hoisted and fixed in position all as specified

S & F 20 mm bore ball brass valves high pressure with polythelene float and fly nut complete screwed for iron pipe and fixed. complete all as specified and directed.

S & F 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for cement concrete in sub base flooring,filling, and mass concrete type E2, 1:5:10 (using 40mm graded stone aggregate) complete all as specified and directed

M& L for chequered cement conrete tiles of size 30 cm X 30cmX 25mm thick (with grey cement and pigments) set, jointed and pointed in neat cement slurry in floor, laid over and incl 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry complete all as spd & directed.

SCHEDULE A (PART-II)Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge

Taking down ceiling fan/ Exhaust fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engr-In-Charge.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20 mm dia medium grade ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories for modular switches/ socket etc. with and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly for one light point / fan point / bell point controlled by one switch 5 Amp complete all as specified and directed. .

All As per Srl item N0 108 above but for one socket out let 5 Amp controlled by one switch on same board with other switch .

All As per Srl item N0 108 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .

All as per item No 108 above here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.

All as per item No 108 above here in before but point wiring with 4 sqmm FRLS multi stranded copper conductor cable for main circuit and 4 sqmm cable as earth continuity conductor for controlled by two pin and earth plug and socket complete with one Double pole MCB 32 amp 240V

S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified.

S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified.

S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified

S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.

S & F Modular Fan step Regulator electronic, 120 watts 2 Module complete all as specified.

S & F Modular white cover plate incl Modular base frame/boxes & powder coated Modular sheet metal concealed box for 6 module complete all as specified.

All as per Item No-118 above but 3 module complete all as specified.

All as per Item No-118 above but 2 module complete all as specified.

All as per Item No-118 above but 8 module complete all as specified.

All as per Item No-118 above but 12 module complete all as specified.

S & F Modular blanking plates 1 module complete all as specified.

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated body complete all as specified and directed.

S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings along with 10 watt LED bulb complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18 W, 220V, AC decorative box type with driver,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed .

Supply and fixing warm/White / cool white LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and directed

S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link Vertical TPN 4 way suitable for MCCBas incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar 125 A MCCB as incomer 16 KA complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification incl taking out of exsing UNSV DB with MCBs.(Note: MCCB 125 Amp 4 pole shall be measured and paid seperately)complete all as specified and directed

S&F MCCB 125A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal settingcomplete all as specified and directed

S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.complete all as specified and directed

S&F sheet metal enclosure distribution board SPN 08 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.

S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete all as specified and directed

S&F MCB single pole 5 to 32 Amps 10 KA 240 volts "C" series complete all as specified and directed

S&F building security light luminaries eenergy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm bore medium grade, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size of clamps , nuts, bolts and washers etc including taking down of existing light fitting and complete ,all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 2 core nominal cross section in service connections complete all as specified and directed

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 35 Sqmm 3.5 core, complete all as specified and directed

Excavation in trenches in any type of soil not exc 1.5 mtr in depth and 1.5 mtr wide and getting out for laying of cables.complete all as specified and directed

Returning and filling in including spreading, leveling , watering and well ramming in layers not exceeding 25 cm thick excavated earth complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed.

M&L for well burned bricks , laid flat ( old size) sub class B designation '75' for cable protection copmplete all as specifed and directed.

M&L Sand cushioning to under ground cable laid in trenches for laying of LT UG cables 8 cm depth before laying the cable and 15 cm after laying complete all as specified and directed.. Note: Punned thickness as per MES SSR Part-I (2020) shall be measured and paid for

M&L in replacement of sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked minimum 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sq mm as earth continuity conductor connected to commen earth and earth dolly complete all as specified and directed

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified and directed

ASHWANI KUMAR KHAJURIA AND SONS (BID ID -3243015)

BHARTI CONSTRUCTIONS (BID ID -3243318)

M/S Shankardass Devidass (BID ID -3247543)

U K Engineering Works (BID ID -3243767)

M/S MANISHA BUILDERS (BID ID -3249920)

M/S maqsood enterprises (BID ID -3243136)