Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.1 LAccepted-AOC 34 C R AVENUE JABAKUSUM HOUSE 3RD FLOOR ROOM NO 312 KOLKATA 700 012 | KOLKATA | WEST BENGAL | 700012 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹37.3 L+₹3.8 L (11.5%)Rejected-Finance AKASHGANGA SUKANTA MARG MONIRAMPORE BARRACKPORE WEST BENGAL 700120 | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹38.3 L+₹4.9 L (14.7%)Rejected-Finance 117 LENIN SARANI KOLKATA 700 013 WEST BENGAL | KOLKATA | KOLKATA | WEST BENGAL | 700013 | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹39.7 L+₹6.3 L (18.8%)Rejected-Finance | L4 | Rejected-Finance Being higher bid value | |
| 5 | L5₹40.6 L+₹7.2 L (21.6%)Rejected-Finance 107 1F TOLLYGUNGE ROAD KOLKATA 700026 | KOLKATA | KOLKATA | WEST BENGAL | 700026 | L5 | Rejected-Finance Being higher bid value |
Tender Value
₹33.5 L
EMD Value
₹67,000
Closing Date
25 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
8084/B/E8
2022_MES_554647_1
GE/ALP (8084B) OF KOLKATA 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE ALIPORE KOLKATA
Class D and category a (i)
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER ALIPORE
₹67,000
Yes
18 Jan 2023
27 Sept 2022
26 Oct 2022
27 Sept 2022
25 Oct 2022
11 Oct 2022
Amount
AC/KOL/72/GE (A)/QWM Demolition of cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Dismantiling of floor hearth or wall tiling incl cement mortar bedding (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed by Engineer-in-charge.
Material and labour for 25mm thick PCC (1:2:4) type B-1 (Using 20 mm graded stone aggregate) as in base of floor complete all as specified and as directed.
Material and labour for Double charged vitrified ceramic coloured light shade tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting/dado etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick plaster in cement mortar (1:4) for backing coat complete all as specified and directed Make:- Kajaria Premium Quality .
Material and labour for Digital Glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge. Make:- Kajaria Premium Quality .
Material and labour for heavy duty coloured floor tiles as in floor 10-12 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.
MODULAR CABINET OF ELEVATION AREA 3.00 SQM(BASE 0.6M) Supply and installation of semi-modular kitchen cabinet consists of : (a) Bottom of kitchen platform for storage made out of commercial plywood of BWP grade 18mm thick for outer framing. (b) 12mm thick for doors and inside shelves and 8mm thick for back paneling (c) duly glued with 1mm thick coloured laminated sheet for outer area and 1mm thick white laminated sheet for inside of cup-board with (d) 3 nos of stainless steel trays for culteries (Make Godrej or Techno commercial Equivalent) (e) 3 nos of SS trays for plates(Make Godrej or Techno commercial Equivalent) (f) including fixing of all builders hardware like profiles for drawers and cupboard shutter heavy duty stainless steel hinges L type, magnetic catchers etc., complete all as specified and directed.
SUPPLY, FABRICATION AND FIXING OF TOP UNIT AND SIDE CUBBOARDS (ELEVATION AREA = 2.25SQM) with the following:- (a) Plywood BWR 19mm thick (b) 0.9mm thick lamination sheet (c) 1mm SS sink without Drain Board with fittings of approved make Overall size: 510x430mm Bowl size: 430x380x200mm (d) Aluminum profile handel (e) teak wood Beading (f) Hydaulic pumps for top hung shutter.
Supply and fixing for 15mm CP Bib tap fancy type swan neck complete all as specified and as directed.
Supply and fixing kitchen plate rack made out of 1mm thick stainless steel of size 24x36x10 inch complete all as specified and as directed.
Material and labour for preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coat of oil emulsion distemper over a coat of primer to match with the new suface on wall/ceiling complete all as specified and as directed by Engineer-in-charge.
Material and labour for 18-20mm thick granite slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
Supply and fixing for Electric chimney (Hood) of approved make with all accessories. complete all as specified and as directed
AC/KOL/73/GE(A)/QWM Supply and install 1.5 TR hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity as shown. complete all as specified and as directed Make- Voltas-SAC183PZY-R(R32) or equivalent LG/Blue star and as per list of manufactures
Material and labour for Sub main wiring 2 x 4 Sqmm multi-strand PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of PVC insulated multi-strand copper conductor of size 4.0 sqmm complete all as specified and as directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. Note : 3 run cable and one run conduit shall be measured as one unit.
Material and labour for modular metal flush box 2 module one complete all as specified and directed.
Material and labour for modular white cover plate with frame 2 module including taking down of old one complete all as specified and as directed.
Supply and fixing modular type 32 A Motor starters white clour, complete all as specified and as directed Make Crabtree -ACASMXW321 or equilvalent as per list of Make.
Supply and fixing modular type 10/25 A 3 Pin Shuttered Socket white clour ACAKCXW253 complete all as specified and as directed
Supply and fixing 25 A 3 pin plug top complete all as specified and as directed
Supply and fixing heavy duty air conditioner Outdoor unit mounting bracket made up of heavy duty GI steel having weight carrying capacity of 150 kg and complete all as specified and as directed
Supply and fixing Mushroom light,new generation energy saving environmental friendly, long life astheticaly desieneddie cast aluminium luminarie for downward lighting withhigh power LED light complete all as specified and as directed. Make- Havells MUSHROOMBL16WLED730SSYMTOPC or equilvalent as per list of Make.
Supply and fixing Cable junction box IP 66 with integrated membranes/metric knockouts for cable enty with terminal of size 10-16 Sqmm, complete all as specified and as directed. Make- HENSEL- Cat No- DK 1616 G or equilvalent as per list of Make.
Supply and laying for under ground heavy duty XLPE insulated, armoured aluminium conductor cable 1100 volts grade, cross-sectional area 10 sq. mm 2 core in trenches / through pipe in road crossing / plinth/ drain/ duct/ floor along pole / wall /ceillings etc after and including disconnecting and taking out existing unserviceable cable complete all as specified and directed by the Engr- in- Charge. Note:- Earth work, bricks protection, sand cushioning shall be measured and paid seperately.
Materials and labour for plain cement concreate (1:3:6) type C2 (using 40 mm gradeed stone aggregrate) as in foundations filling, coping for pole and mass concreate dualy plastered with cement mortar (1:4) and making the surface even & smooth by using extra cement including necessary form work complete all as specified and as directed by the Engr-in-Charge
Supply and fixing 25 mm Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches complete all as specified and as directed.
Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth for foundation or for laying of cable , fixing of pole etc and getting out in soft/loose soil complete all as specified and as directed by the Engr-in-Charge.
Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to desired thickness complete all as specified and as directed by the Engr-in-Charge.
Supply and laying for burnt brick sub class 'B' of size 25 X 12.5 X 7.5 cm locally available best quality laid in trenches for protections of under ground cable complete all as specified and as directed by the Engr-in-Charge .
Returning, filling in trenches including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed by the Engr-in-Charge.
Supply and fixing Transparent lid enstry empty enclosure for fixing of MCB and analoge timer switch complete all as specified and as directed. Make : HENSEL- Cat No- FP 0221
Supply and fixing MCB 06 Amps to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing analouge type time switch with one No and one No NC contacts suitable for 230 Volt 50 Hz AC Supply and of capacity 16 Apms, complete all as specified and as directed. Make- L&T (FM/1QUARTZ) or equilvalent
Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level , not exceeding 1.5 metre above the starting point complete all as specified and as directed by the Engr-in-Charge.
AC/KOL/85/GE(A)/QWM Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete.
Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.
Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed by the Engr-in-Charge.
Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.
Dismantiling of floor hearth or wall tiling incl cement mortar bedding (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed by Engineer-in-charge.
Taking up or down 15mm steel tubing and connections and removal complete all as specified and as directed by Engineer-in-charge.
Taking up or down 20mm steel tubing and connections and removal complete all as specified and as directed by Engineer-in-charge.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixingor removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
Taking down existing roof treatment with existing cracked plaster by manually or mechanically and wire brushing and cleaning the existing surface with water complete all as specified and as directed by the Engr-in-Charge.
Material and labour for brick work with sub class 'B' bricks built in cement mortar (1:6) straight or curved on plan exceeding 6 mtr mean radius and all as directed.
Material and labour for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete.
Material and labour for Rendering 15mm thick in cement mortar (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Material and labour for rendering 15 mm thick, in cement mortatr (1:4), as on brick/concrete surface etc finish even and smooth without using extra cement complete all as directed.
Material and labour for Rendering 5mm thick with cement mortar (1:4) on concrete surfaces and finished the surface even and smooth as in ceiling complete all as specified and as directed by Engineer-in-charge.
Material and labour for complete removal of existing old surfaces of wall and preparation of old or previously untreated surfaces and applying two coats white cement based wall care putty and one coat alkali resistant primer, sanding the surfaces and finally applying two coats of Anticorbonation paint complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces and applying two coats white cement based wall care putty and one coat alkali resistant primer, sanding the surfaces and finally applying two coats of Anticorbonation paint complete all as specified and as directed.
Material and labour for preparation of new plastered surface of wall/ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed by Engineer-in-charge.
Material and labourfor preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coat of oil emulsion distemper over a coat of primer to match with the new suface on wall/ceiling complete all as specified and as directed by Engineer-in-charge.
Material and labour for backing coat/Screed bed or bedding layer of mortar 10 mm thick in cement mortar (1:3) as in dado/skirting complete all as specified and as directed by Engineer-in-charge.
Material and labour for Screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed by Engineer-in-charge.
Material and labour Non-skid coloured ceramic floor tiles 7 to 8 mm thick area of each tile exc .11 sqm but n exc 0.18 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to to match the shade of tiles .complete all as specified and as directed by Engineer-in-charge. (Note:- Screed bed shall be measured and paid Seperately under respective items of Sch "A').
Material and labour for Glazed ceramic coloured wall tiles of size 450x300x6mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles .complete all as specified and as directed by Engineer-in-charge. (Note:- Screed bed shall be measured and paid Seperately under respective items of Sch "A').
Material and labour for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces
Supplying and laying for 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed
Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed
Supply and fixing 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs 15mm bore Brass CP bib cock fancy type with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 15mm bore Brass CP angular stop cock concealed type with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair PVC connection 15 mm size pipe with PTMT nut of Length 450mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing for stainless steel railing of 304 Grade for ramp complete all as specified and directed by Engr-in -charge.
Supply and fixing 40mm bore CPVC pipe with fittings complete fixed in wall/laid in floor complete all as specified and as directed by engineer-in-charge.
Supply and fixing 32 mm bore brass CP bottle traps for wash basin with inlet and outlet screwdfor pipe and connections incl nessesary packing complete all as specified and as directed by engineer-in-charge.
Supply and fixing in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by engineer-in-charge.
Supply and fixing in repair towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete fixed in repairs with brass chromium plated screw complete all as specified and directed.
Supply and fixing in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed by Engineer-in-charge.
Supply and fixing for 75 mm diameter of outlet of PVC(SWR) floor trap,Plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-charge.
Material and labour for 75mm thick PCC type D-2 (1:4:8) (using 40mm graded stone aggregate), as in sub base for floors, complete all as specified and directed.
Material and labour for 25mm thick PCC (1:2:4) Type B-1 (using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Solid PVC Mouded Door Frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with partical board core complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 200 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
Supply and fixing 150 mm long Aluminium handles, cast type, anodised complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 100 mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed.
Material and labour for cement concrete ( 1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 110mm bore PVC(SWR) Junction single T equal and unequal complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 75 mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge.
Dismantling water tank and removing to store of 1000 litrs capcity complete all as specified and as directed.
Supply and fixing for Rotational moulded PVC water storage tank 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. complete all as specified and as directed.
supply and fixing in repair vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron p or s trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 3mm thick wall care putty on wall/ceilling complete all as specified and as directed by Engineer-in-charge.
Material and labour for cement concrete coloured chequered tiles 25mm thick and area of each tile not exc 0.16 sqm set, jointed and pointed in neat cement slurry in floors including 20mm thick screed bed or bedding in cement mortatr (1:6) complete all as specified and as directed
Material and labourL for 75mm thick PCC (1:3:6) type C-1 (Using 40 mm graded stone aggregate) as in plinth protection & hard standing complete all as specified and as directed.
Material & labour for 15mm thick screed bed or dedding layer in cement mortor(1:4) mixed with WPC as per manufacturer instruction for laying of APP membrane complete all as specified and as directed by the Engr-in-Charge.
Material & labour for bitumin primer shalikore T-32 @ 0.70 KG PER Sqm over the cement plaster incl preparation of surfaces as per manufactureers instruction complete all as specified and as directed by the Engr-in-Charge.
Material & labour 3MM thick prefabricated plastomeric water proofing membrane (Polyster rainforced) with spun bonded polyster mat as a core (APP membrane) (Weight not less than 3 kg per sqm ) laid over bituminous coted surface of roof and applied with lpg torch and applying uniform pressure with a roller /wet cloth to ensure to remove entrapped air ,if any all as per manufactureer instrucction .The APP membrane shall be overlap of not less than 100mm and 150mm as end lap and side lap respectively sas per manufacturer instruction .The over laping and joints will be thermosealed with the propane torch complete all as specified and as directed by the Engr-in-Charge.
Supply only WPC
AC/KOL/27/GE (A)/QWM Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.Complete all as specified and directed by Engr in Charge.
Demolition of cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed by the Engr-in-Charge.
Taking down chowkat or frames with shutter exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.
Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.
Material and labour for 25mm thick PCC (1:2:4) type B-1 (Using 20 mm graded stone aggregate) as in base of floor complete all as specified and as directed.
Material and labour for brick work with sub class 'B' bricks straight or curved on plan or to any radius in half brick work built in cement mortar (1:4) Complete all as specified and directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.
Material and labour for rendering 15 mm thick in cement mortatr (1:6), as on brick/concrete surface etc finish even and smooth witout using extra cement complete all as specified and directed.
Material and labour for Double charged light shade vitrified ceramic coloured tiles 8-9mm thick (square /rectangular) polished area of each tiles not exceeding 0.36 sqm as in skirting/dado etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick plaster in cement mortar (1:4) for backing coat complete all as specified and directed.
Material and labour for Double charged light shade vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick cement plaster in CM (1:4) for backing coat complete all as specified and directed.
Material and labour for Digital Glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for powder coated aluminium sliding windows three track of any colour, (thickness of powder coating not less than 50 micron) frame of section 92mmX29.5mm X1.50mm and shutters of 'H' section 39mm X20mm X1.50mm, 'Interlock' Section 39x20x1.50mm and 'Edge & bottom' Section 41x20x1.20mm thick fixed with 5mm thick coloured sheet glass in two shutter and one shutter with stainless steel wiremesh including all necessary joining cleats, hold fast, rubber gasket,snap beading and locking arrangement fixed with screws to wall etc; complete all as specified and directed by the Engr-in-Charge.
Material and labour for 4mm thick non asbestos cement false ceilling tiles of size 595 x 595 mm of approved design fixed with powder coated GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm), and powder coating GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x595 mm with 2 mm dia GI wire suspended including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrengement with grid size 60 x 120 cm complete all as spd and directer by Enginer in charge.
Supply and fixing for mild steel flat iron of size 25x3 mm or equivalent as required for hold fasts and clamps & similar small articles confirming to Fe-410-O or Fe-310-O complete all as specified and as directed by the Engr-in-Charge.
Material and labour for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in hold fast block, bed plates, copings etc. including necessary formwork complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for 35mm thick factory made flush door shutters solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for 35mm thick 2nd class hard wood factory made Glazed and skeleton shutters (factory made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for 100mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for 150mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and as directed
Supply and fixing for 250mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for 100mm long double action spring hinges, mild steel with steel wire spring, stove enamelled, black, complete all as specified and as directed
Supply and fixing for framed work such as grills,gratings, etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165complete all as specified and directed.
Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engr-in-Charge.
Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by the Engr-in-Charge.
Material and labour for complete removal of existing sufaces and applying two coats of oil bound distemper over 3mm thick cement base wall care putty in two layer including preparation of old surfaces complete all as specified and directed.
Material and labour for applying two coats of oil bound distemper over 3mm thick cement base wall care putty in two layer including preparation of new surfaces complete all as specified and directed.
Material and labour for pre-cast RCC (1:2:4) type B-1 (using 20 mm graded aggregate) as in window or door cills, lintels,shelves ,slab etc;set in cement mortar (1:4) including all necessary form work complete all as directed
Supply and fixing for mild steel TMT bars, 10mm dia, cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed)not less than 0.90 mm dia complete all as specified and directed.
Material and labour for 16-18mm thick granite slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement (1:6) complete all as specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-Charge.
Material and labour for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces
Supplying and laying for 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilling or laying in floors including all fitting in any grade complete all as specified and directed
Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilling or laying in floors including all fitting in any grade complete all as specified and directed
Supplying and laying for 40 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilling or laying in floors including all fitting in any grade complete all as specified and directed
Supply and fixing for 15mm CP Bib tap fancy type swan neck complete all as specified.
Supply and fixing for 1mm thick SS Plate rack of Size 800x600mm complete all as specified and directed.
Supply and Fixing sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fixing for 2nd class hard wood plain fillet of size exc 13 & n.exc 25 Sq cm, rectangular or square in section, clean sawn, secured with nails or beads complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for 18/19mm thick block boards, grade 2 quality,interior grade, decorative type with decorative face veneer on both face fixed with screws to timber frame work as in cupboard shutter including external teak wood lipping 6mm thick fixed with nailscomplete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for 30mm width of flap continious piano hinges mild steel,bright finish or electro galvanised complete all as specified and directed by the Engr-in-Charge.
Supply and fixing for 40mm dia cupboard knobs of brass fixed with nut, screw and washer complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for 100mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and as directed
AC/KOL/28/GE(A)/QWM Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.Complete all as specified and directed by Engr in Charge.
Demolition of cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed by the Engr-in-Charge.
Taking down chowkat or frames with shutter exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.
Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.
Material and labour for 25mm thick PCC (1:2:4) type B-1 (Using 20 mm graded stone aggregate) as in base of floor complete all as specified & directed.
Material and labour for brick work with sub class 'B' bricks straight or curved on plan or to any radius in half brick work built in cement motar (1:4) Complete all as specified and directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.
Material and labour for rendering 15 mm thick in cement mortatr (1:6), as on brick/concrete surface etc finish even and smooth witout using extra cement complete all as specified and directed.
Material and labour for Double charged light shade vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting/dado etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick plaster in cement mortar (1:4) for backing coat complete all as specified and directed Make:- Kajaria Premium Quality .
Material and labour for Double charged light shade vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) for backing coat complete all as specified and directed .Make:- Kajaria Premium Quality .
Supply and fixing for powder coated aluminium sliding windows three track of any colour, (thickness of powder coating not less than 50 micron) frame of section 92mmX29.5mm X1.50mm and shutters of 'H' section 39mm X20mm X1.50mm, 'Interlock' Section 39x20x1.50mm and 'Edge & bottom' Section 41x20x1.20mm thick fixed with 5mm thick coloured sheet glass in two shutter and one shutter with stainless steel wiremesh including all necessary joining cleats, hold fast, rubber gasket,snap beading and locking arrangement fixed with screws to wall etc; complete all as specified and directed by the Engr-in-Charge.
Material and labour for 4mm thick non asbestos cement false ceilling tiles of size 595 x 595 mm of approved design fixed with powder coated GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm), and powder coating GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x595 mm with 2 mm dia GI wire suspended including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrengement with grid size 60 x 120 cm complete all as spd and directer by Enginer in charge.
Supply and fixing for mild steel flat iron of size 25x3 mm or equivalent as required for hold fasts and clamps & similar small articles confirming to Fe-410-O or Fe-310-O complete all as specified and as directed by the Engr-in-Charge.
Material and labour for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in hold fast, bed plates, copings etc. including necessary formwork complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for 35mm thick factory made flush door shutters solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for 100mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for 150mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and as directed
Supply and fixing for 250mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for framed work such as grills,gratings, etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165complete all as specified and directed.
Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engr-in-Charge.
Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by the Engr-in-Charge.
Material and labour for complete removal of existing treatment of old decorated sufaces of wall and applying two coats of oil bound distemper over 3mm thick cement base wall care putty in two layer including preparation of old surfaces complete all as specified and directed.
Material and labour for applying two coats of oil bound distemper over 3mm thick cement base wall care putty in two layer including preparation of new surfaces complete all as specified and directed.
Material and labour for 16-18mm thick granite slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for 20mm high strength aluminium powder coated drapery rod fancy type complete all as specified and as directed.
Supply and fixing for 20mm fancy type bracket for drapery rods anodized aluminium alloy complete all as specified.
Supply and fixing for 2nd class hard wood plain fillet of size exc 13 & n.exc 25 Sq cm, rectangular or square in section, clean sawn, secured with nails or beads complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for 18/19mm thick block boards, grade 2 quality,interior grade, decorative type with decorative face veneer on both face fixed with screws to timber frame work as in cupboard shutter including external teak wood lipping 6mm thick fixed with nailscomplete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for 6mm thick plywood in cupboards complete all as specified.
Supply and fixing for 30mm width of flap continious piano hinges mild steel,bright finish or electro galvanised complete all as specified and directed by the Engr-in-Charge.
Supply and fixing for 40mm dia cupboard knobs of brass fixed with nut, screw and washer complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for 100mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and as directed
AC/KOL/51/GE(A)/QWM (E/M PART) Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2.0 TR. Note : VOLTAS/LG/BLUESTAR as per list of make.
Material and labour for Sub main wiring 2 x 4 Sqmm multi-strand PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of PVC insulated multi-strand copper conductor of size 4.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. Note : 3 run cable and one run conduit shall be measured as single unit.
Supply and fixing MCB protected Power Unit with 16 - 25 Amp MCB, Motor Starter, Socket and Plug Top with indicating light combined all as specified and directed. Make: North West/ Havells or equivalent.
Supply and fixing heavy duty air conditioner Outdoor unit mounting bracket made up of heavy duty GI steel having weight carrying capacity of 150 kg and all as directed by engg-in-charge.
Supply and fixing Powder Fire Extinguisher (Stored Pressure type) Capacity 09 Kg duly ISI marked conforming to IS: 15683:2006, with IS 4308, ISI marked ABC powder complete with squeeze grip release valve, discharge pipe locking arrangement, pressure gauge, operation manual and bracket. Operating Temperature: -30ºC to + 60ºC. MAKE-LIFEGUARD
Supply and fixing CO2 type Fire Extinguisher ISI marked conforming to IS: 15683. Capacity 4.5 Kg. Complete with delivery hose horn, wheel type release valve, locking arrangement, operation manual and bracket. Operating Temperature:- 30ºC to +60ºC. MAKE- LIFEGUARD
Supply and fixing CO2 Wheeled Fire Extinguisher ISI marked conforming to IS: 16018. Capacity 9 Kg. Complete with composite trolley with handle & wheel, operation manual, wheel type release valve, locking arrangement and shut-off valve fitted with delivery hose horn. Operating Temperature: -30ºC to + 55ºC. MAKE- LIFEGUARD
Supply and fixing Mechanical Foam (AFFF) Fire Extinguisher Stored pressure type ISI marked conforming to IS: 15683. Capacity 9litre. Complete with delivery hose, squeeze grip release valve, locking arrangement, pressure gauge, operation manual and bracket. Operating Temperature: +5ºC to + 60ºC. MAKE- LIFEGUARD
Supply and fixing Fire Bucket
Supply and fixing Fire Bucket stand suitable for 4 bucket
Supply and fixing Pik axe
Supply and fixing Shovel with wooden handle
Supply only fire hook with bamboos of suitable length
Supply only fire beeter with bamboo handle of suitable lenght
AC/KOL/51/GE(A)/QWM (B/R PART) Surface excavation n.exc. 30 cm deep and averaging 15cm deep and getting out in Soft/loose soil. Complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.50cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering & removing surplus soil to a distance n. exc 50m and making good surfaces in soft/loose soil complete all as specified and directed.
Material and labour for cement concreate (1:3:6) type C2 (using 40 mm gradeed stone aggregrate) as in cement concrete in foundations filling and mass concrete complete all as specified and as directed by the Engr-in-Charge
Supply and fixing steel work of MS Square/round pipe as in purlin, rafter, post and trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed by Engineer-in-charge.
Preparation of new or previously untreated steel surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing Prepainted galvalume aluminum zinc coating based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and as directed
Supply and fixing Prepainted galvalume aluminum zinc coating based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and as directed
Material and labour for brick for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) .
Material and labour for Rendering 15mm thick in cement mortar (1:4) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparing new plastered or previously untreated surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
AC/KOL/01/GE(A)/QWM Taking down plaster cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.Complete all as specified and directed by Engr in Charge.
Demolition of cement concrete in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Taking down chowkat or frames with shutter exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.
Dismantiling of floor hearth or wall tiling incl cement mortar bedding (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed by Engineer-in-charge.
Dismantling of steel sheet (corrugated, semi-corrugated) any gauge,thickness in roof covering incl ridges etc complete all as specified and directed.
Material and labour for 75mm thick PCC type D-2 (1:4:8) (using 40mm graded stone aggregate), as in sub base for floors, complete all as specified and directed.
Material and labour for 25mm thick PCC (1:2:4) type B-1 (Using 20 mm graded stone aggregate) as in base of floor complete all as specified and as directed.
Material and labour for Machine cut kota stone slab flooring 18-20mm thick set, jointed and pointed in neat cement slurry in floors including 20mm thick screed bed or bedding in cement mortatr (1:6) including grinding, polishing etc complete all as specified and as directed.
Material and labour for heavy duty coloured Endura floor tiles as in floor 10-12 mm thick (square/rectangular) area of each tile 300x300mm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.
Material and labour for Double charged light shade vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in flooring etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 15mm thick plaster in cement mortar (1:4) for backing coat complete all as specified and directed Make:- Kajaria Premium Quality . (Model - Assam Rosewood and Cairo)
Material and labour for Double charged light vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) for backing coat complete all as specified and directed .Make:- Kajaria Premium Quality. (Model - Assam Rosewood and Cairo)
Supply and fixing for teak wood door chowkhat with glazed shutter of Size 1.65 X 2.25M including 6mm thick bronze glass, teak wood beading, floor spring,Brass mongrey fitting and polishing complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, fixed with self tapping screws as specified. complete all as specified and as directed.
Supply and fixing for Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, ficed with self tapping screws as specified as in ridges. complete all as specified and as directed.
Supply and fixing for 12mm thick plywood grade BWR type BB,fixed with screw to timber frame work complete all as specified and as directed.
Supply and fixing for 4mm thick veneered decorative plywood grade 1 ( with BWR resin) with decorative face veneers on one face fixed with screw to timber frame work complete all as specified and as directed. Make - Green Ply / Century
Material and labour for preparation of wooden surfaces and applying two coats of french polishing on surfaces of any description including filler coat with liquid wood filler,transparent,and bringing forward surfaces to smooth even finish complete all as specified and as directed.
SREE GURU CONSTRUCTION CO
BHARUKA ENTERPRISES
ESS PEE UDYOG
S.M.CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .