Interior fit out work of office space of Bharat Electronics Limited (BEL) at 6th floor, tower A, WTC, Nauroji Nagar, New Delhi-110029

S NO DESCRIPTION AMOUNT AMOUNT

2.00 PLUMBING/ SANITARY WORKS 95,434.45 721,432.00

3.00 ELECTRICAL WORKS 9,597,988.00 6,183,131.00

11.00 ACCESS CONTROL 0.00 2,745,795.00

13.00 FIRE ALARM & PA SYSTEM 0.00 3,101,317.00

18.00 GAS SUPPRESSION 0.00 1,307,772.00

A Add GST MF @ 1.0633 for GST 18% from 12% (on SL No. 3, 4, 5 & 14) 13,999,368.46

GST MF @ 0.973 for GST @ 18% instead of 21.27% 25,295,719.92

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CIVIL WORKS

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

1 FLOORING WORKS

CEMENT CONCRETE: Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and shuttering-all work upto

1.01 plinth level.

4.1.8 1: 4: 8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) 132.00 CUM 6812.00 899184.00

RAISED FALSE FLOOR: Providing and fixing removable raised/false access flooring with systemand its components of approved make for different plenum

height with possible height adjustment upto 50mm, comprising of modular loadbearing floor panels supported on G.I. rectangular stinger frame workand G.I.

Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully

welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded

with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the

pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved

make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at both ends for securing the

stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer

assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear

1.02 uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and

as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H).

Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates

of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel

should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland

cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp

technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied

on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load

(UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-

charge. All specification must be printed on the side of the panel to ensure the quality of the product.

11.54.2 450mm Finished Floor Height (FFH). 35.50 sq m 5977.35 212195.93

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thickness 1.30 to 1.50mm. Designed

to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

ENGINEERED WOODEN FLOORING: Supplying and Installation of engineered wooden flooring of total thickness 13 mm -16 mm, Toplayer PEFC controlled

1.04 MR Core board PEFC controlled Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and groove Length Uniclic Width Uniclic Multifit Domestic 250.70 sq m 5765.00 1445285.50

use Conditions as per direction of engineer in charge.

VITRIFIED TILES: Providing and laying Vitrified tiles full body with smooth surface in floor (thickness 15 mm to be specified by the manufacturer), with water

absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer

modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, approved make Kajaria, Somany, RAK or equivalent. as

per direction of Engineer-in-charge.

b MR Size of Tile 1200x600mm. 35.00 sq m 2178.00 76230.00

c MR Special Subway Tile 20.00 sq m 3331.00 66620.00

CARPET TILES: Providing and laying carpet tile flooring. Carpets shall be of Type 6 nylon loop pile carpet tiles/Plank. The carpet shall have sufficient gauge

(1/10 ~ 1/12) with sufficient stitches (10~13) per inch. The carpet shall be solution dyed fibre content or with injection printing technology. The carpet shall have

the pile height ranging from (2.0 ~ 3.0) mm with average density higher than 4500 Oz/ cubic yard. The total thickness of the carpet tile shall also range from

ITALIAN MARBLE: Providing and laying machine cut, mirror polished, Italian Marble brass brass inlay stone flooring laid in required pattern in linear portion of

the building all complete as per architectural drawings, with 18mm thick stone slab laid over 20mm (average) thick base of cement mortar 1: 4 (1 cement: 4

coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble

11.51 shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab in all colour and shade 428.34 sq m 6603.35 2828478.94

IPS FLOORING: 52mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded

stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This

includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

2 Digitally signed by AMIT

TOTAL FLOORING WORKS 4976722.33 5522184.50

3 Digitally signed by AMIT

2 FALSE CEILING WORKS

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power

pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm

long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end

of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm

thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450

mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry

wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended

jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.45.1 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 510.30 sq m 1355.80 691864.74

WOODEN VENEER CEILING: Providing and fixing wooden veneer ceiling by fixing Natural OAK Veneer 4mm on 12mm underlay fire retardant ply fixed to a

subframe made using 50mmx50mm Kiln seasoned and chemically treated hollock wood fixed to RCC ceiilng using Fasteners.

POLISH: Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the

sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.

2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth

2.03 13.116 after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry 39.70 sq m 3049.85 121079.05

for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion.This 1st coat is

allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied

with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete coat to be done in 1 or 2 layers

without gap of time) as per direction of Engineer-in-Charge.

BAFFLE CEILING: Providing & fixing polylam blades vertical & horizontal baffle system, exhibiting space-delineating characteristics. The system comprises

baffles 50mm wide & 100 Deep thickness of minimum 0.5mm GMS, installed at 150mm C/C. The C shaped shaped carrier rails run perpendicular to themain

baffles profiles. Individual baffle lengths between 300 and 2400 mm can be selected. Baffle are supplied with the end cap matching the similar finish of baffle.

Tolerances according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2015 approved by SIS. Substructure for POLYLAM®️ Vertical baffle system

consisting of C shape carrier of minimum 1.2mmthickinstalled perpendicularly to baffles, same was hanged to wall with the help of wall anchor fasteners.

2.04 MR Baffles to be connectedperpendicular to C shaped carriers with the help of baffle hanger brackets. The primary profiles must be connected to oneanother with 95.00 sq m 6150.00 584250.00

longitudinal splice connectors. C shaped baffle carriers to be installed at maximum distance of 1200mm. in a length of 2400 mm baffles.Manufacturer shall

have the fully automatic powder coating system with power and free conveyorize 3mtr/minute capacity. Powder coating plant shall be equipped with latest

modern technology with fully automatic inline Pre-treatment using nano technology, Inline automatic water Drying system after pre-treatment. Mode of

Measurements: Measurements shall be wall to wall without any deductions for lights, diffuses, columns etc.. IN WOODEN FINISH

LINEAR OPEN CELL CEILING: Providing and fixing of Star 3 linear cell ceiling made out of Aluminium. The assembled cell ceiling panels shall be in size of

600x1200. The assembled cell ceiling panels shall made out of main blades in 3mm (W) x 20mm (H) in 1200mm (L), installed at 30mm c.c. and cross

connected to secondary blades in 9mm(W) x 22mm (H) in 600mm (L) with 375mm pitch. The assembled cell ceiling panels are then clipped into U-94 carriers

2.05 MR in Aluminium, pre-coated in black enamelled finished at 1200mm c.c. Wire clips shall hold the cell ceiling panels into the U-94 carriers. Once the U-94 carriers 83.52 sq m 7047.00 588565.44

are installed then primary angles made out of GMS, type U1040 are cross connected to the U-94 carriers at 1200mm c.c. for lateral bracing The whole ceiling

shall be suspended by M6 threaded rods installed 100mm c.c.All panel modules must be hingeable through wire clips.Finish of cell ceiling panels: metallic

silver in RAL 9006.

4 Digitally signed by AMIT

WOOD GRILLE CEILING & WALL PANELLING: Providing & fixing of WoodWorks Grille with backer made of compressed natural bamboo with 24mm

Prelude 43 black exposed grid. The Grille panels shall be made of rapidly renewable natural bamboo core having density 600+Kgs/m3 as per BS EN323

(1993) and bending strength of 96+ N/mm2 as per BS EN310 (1993). The Grille panel shall have a seven layer UV coating of thickness 0.09-0.11mm as per

BS EN71 finished to natural or carbonized shades. The Grille panel shall be of nominal size 35x300x2400mm comprising 8 blades/slats of 35x16x2376mm

with centre to centre spacing of 37.5mm fixed through Backer of size 12x22x300mm having centre to centre spacing of 300mm and additional end backers at

150mm from both the edges. Ledger of 6.5x24x2400mm shall be used for covering face of wall angle. Open edges shall be covered using Edge Caps of

44x19x2400mm and Blade Junction of 66x38x2400mm shall be used along the connection of two Grille panels. The Grille panel when used with Knauf 20mm

Optra Black Glasswool infill panels shall have an NRC of 0.9 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000

Hz) as per ASTM C423. The Grille panel shall have a fire performance of Class B according to EN13501-1. The Grille panel shall have moisture content of 8-

14% as per IS 1708 (Part 1):1986 and a Humidity Resistance (RH) of 70%.

SUSPENSION: The tile shall be installed on Knauf Prelude 43 Black with 24 mm wide T - section flanges having rotary stitching on all T sections i.e., the Main

Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm, 35mm and 30mm respectively. The deflection loading of the system shall be 17.8 kg/m2

(as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of

21.4kg/m. The end details of the main beam and cross tee shall be made of pre hardened steel fixed to the ends. The cross tee to provide double locking

between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out

strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked

polyester paint with 0T bending capability. All exposed panel ends to be covered using edge caps. All wall angles to be covered using ledgers. Installation

should be carried out as per Knauf recommended procedure. The grid shall be installed with suspension system.

INSTALLATION: To comprise main runner spaced at 1200mm centre to centre securely fixed to the structural soffit using Knauf suspension system

(specifications below) at 1200mm maximum centre. The First/Last Knauf suspension system at the end of each main runner should not be greater than

450mm from the adjacent wall.

Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than

600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross

Perimeter trim to be Knauf wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centre to centre.

Metal spring backer clips shall be used to fix the Grille panel to suspension with a grid formation of 600mm along the blade/slat and 2 pieces along each

backer (total 8 clips per full panel size) for every individual panel. Raise the panel up against the suspension system and align the backers with the suspension

system. Push upwards on the spring backer clip to engage the clip tabs on to the suspension system flange. Ensure that both clip tabs engage the suspension

SUSPENSION SYSTEM accessories manufactured and supplied by Knauf consisting of M6 Anchor Fasteners with hanger hole, pre–Straightened Hanger

wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. Additionally, adjustable hook clips

made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation

PERFORATED GYPSUM CORRIDOR CEILING: Supply and installation of acoustic self supporting ceilings – Corridor 400 - 9.5x400x1800mm high grade,

glass fibre reinforced, acoustic, white painted, gypsum panel with acoustic perforation,as Micro - round 6x6mm c/c 15mm type NRC - 0.70, Corridor 400

panels are with integrated metal profile on the back, to be installed in free span without suspension hangers.

The tiles are furnished with a grey/white absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887). RH - 90% LR - 82.6% Fire Class A2-

2.07 MR s1,d0 SUSPENSION - The flex-profile is an integrated part of the Corridor ceiling plank. The suspension system from approved manufacturers consists of 210.00 sq m 5509.00 1156890.00

reinforced wall angles and 38mm main runners are used between sections and lines of Corridor planks.

Cleaneo Technology - Air purification & Air quality.Active reduction of air polluants thanks to Cleaneo Technology effectively reduces concentrations of VOC’s

like alcohol, aldehydes, ketons and esters as well as unpleasant odours from e.g. food or cigarette smoke. Air purification properties tested according to CEN

standards and VDI guidelines by Fraunhof Insistute for Building Physics

PERFORATED GYPSUM BOARD CEILING: Providing and fixing suspended false ceiling- : Solopanel Size 1188x1998x12.5mm Globe perforation 8/18 with

8.7% perforation with NRC upto 0.6 : Regular round perforation of glass fibre reinforced gypsum material, which includes providing and fixing GI perimeter

channels of size 0.55 mm. Thk. having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, screw fixed to

brick wall/ partition with help of nylon sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of size 45 mm,0.9mm thk with two

flanges of 15 mm each from the soffit at 900 mm centers with ceiling angle of width 25mm x 10mm x 0.55mm thk fixed to soffit with GI cleat and steel

expansion fasteners. Ceiling section of 0.55 mm thk having web of 51.5mm & two flanges of 26mm each with lips of 10.5mm are fixed to the intermediate

channels with help of connecting clips and in direction perpendicular to the intermediate channel with centers of 333 mm perforated gypboard is then screw

2.08 MR fixed to ceiling section with 25 mm dry wall screws at 300 mm centers to G.I. framing in perfect level. Screw fixing is done mechanically either with screw 192.50 sq m 2947.00 567297.50

driver or drilling machine with suitable attachment. Finally the boards are to be joined and finished so as to have a flush look with uniflot.

Cleaneo Technology - Air purification & Air quality.Active reduction of air polluants thanks to Cleaneo Technology effectively reduces concentrations of VOC’s

like alcohol, aldehydes, ketons and esters as well as unpleasant odours from e.g. food or cigarette smoke

Air purification properties tested according to CEN standards and VDI guidelines by Fraunhof Insistute for Building Physics.

The false ceiling surfaces shall be prepared to the satisfaction of the engineer in charge, and shall be applied with two coats of primer to the satisfaction of

300x1200 SUSPENDED FALSE CEILING : Providing and fixing suspended false ceiling microlook tegular edge tile with 15 mm thickness ,easily

demountable tile, manufactured from High density glass wool , visible surface is a batch painted glass tissue in white, back of the tile covered with glass

tissue. Size 1200x600x15mm Acoustics-Sound absorption(Alpha W) - 0.95 at 200 mm o.d.s as per EN ISO 354 Acoustics-Sound absorption Class - Class A

2.09 MR at 200 mm o.d.s as per EN ISO 11654Acoustics-Articulation class - 180 as per ASTM E1111, ASTM E1110,NRC - 0.9 NRC as per ASTM C 423,Humidity 86.50 sq m 2883.00 249379.50

Resistance -Permanent ambient RH up to 95% at 30*C without sagging, warping and delaminating ( 13964:2014). Fire Safety - Tested and classified as non

combustible according to EN ISO 1182 with reaction to fire classification class A2 s1 d0 according to EN 13501-1 - European Standard.

5 Digitally signed by AMIT

Providing and fixing suspended false ceiling: Designpanel Size 900x2700x12.5mm perforation tangent 4mmx14mm,10/20 mm C/C with 15.8 % perforation

and NRC upto 0.70: Micro perforation of glass-fibre reinforced gypsum material, which includes providing and fixing GI perimeter channels The furring should

be min. 60 mm wide at the short end joints (if wood is used; the steel furring can be min. 45 mm). The remaining furring can be 45 mm wide. of size 0.55 mm.

Thk. having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, screw fixed to brick wall/ partition with

help of nylon sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of size 45 mm,0.9mm thk with two flanges of 15 mm each

2.10 MR from the soffit at 900 mm centers with ceiling angle of width 25mm x 10mm x 0.55mm thk fixed to soffit with GI cleat and steel expansion fasteners. Ceiling 513.00 sq m 3084.00 1582092.00

section of 0.55 mm thk having web of 51.5mm & two flanges of 26mm each with lips of 10.5mm are fixed to the intermediate channels with help of connecting

clips and in direction perpendicular to the intermediate channel with centers of 333 mm perforated gypboard is then screw fixed to ceiling section with 25 mm

dry wall screws at 300 mm centers to G.I. framing in perfect level. Screw fixing is done mechanically either with screw driver or drilling machine with suitable

attachment. Finally the boards are to be joined and finished so as to have a flush look with jointing compound.

Multidirectional paddle ceiling , comprising 150(H) & amp; 100(W) fixed paddles manufactured from minimum1.00mm thk aluminium , mounted on a non-

interchangeable punched U-shaped carrier profile cross connected to U1040 multislotted 2.0 GMS L angle as secondary profile installed at 1200mm Centers.

The multidirectional non-perforated blade louvres shall be arranged at precise right angles to each other at 100mm centers on a custom made pre slotted

1.0mm carrier rigidly. The distance between the custom U-shaped carriers shall be 1200mm module according to EN 13964.Entire Ceiling substructure shall

2.11 MR be suspended using M6 threaded rods using technical approved dowels. Substructure powder coated in Matblack shade & LIVA paddles shall be RAL 70.13 sq m 27411.00 1922333.43

powder coated(Non Metallic) as per the architect recommendation. Multi Colour powder coating possible at an additional cost. Tolerances according to TAIM,

DIN EN 13964 and quality controlled to ISO9001:2015 approved by SIS,LEED certification by IGBC. Manufacturer shall have the fully automatic powder

coating system with power and free conveyorize 3mtr/minute capacity. Powder coating plant shall be equipped with latest modern technology with fully

automatic inline Pre-treatment using nano technology, Inline automatic water Drying system after pretreatment.

TOTAL FALSE CEILING WORKS 812943.79 9387297.55

3 WALL FINISHES WORKS

DOUBLE GLAZED GLASS PARTITION SYSTEM WITH GLASS COMBINATION OF 10MM + AIRGAP + 10MM TOUGHENED GLASS): Supply &

Installation of Aluminum profile with top & bottom profiles of size 82mm x 38mm in Natural Anodized / Black finish. Partition sides to be fixed with mullion and

it's covers should be easily accesible while removal of glass, if & when required. Glass to be fixed with suitable EPDM gaskets for insertion of combination of

10mm thick clear toughened glass + 58 to 62 mm Air Gap + 10 mm thick clear Toughened Glass. Glass should not placed directly on profiles for giving more

strength. It should be placed on aluminium spacer profiles and spacers should be covered with cover profiles. Partition Glass joineries consists of two-way

3.01 MR Polycarbonate I-profiles, 90 Degree Polycarbonate L-Junction and Polycarbonate T-Junction profiles. Polycarbonate profile joineries to be fixed with double 248.40 sq m 12812.00 3182500.80

sided adhesive tape & profiles to be inserted in the joint instead of sealing it with sealants. Polycarbonate profiles to be used to give continuity glass effect.

Hardware for fixing profiles to be used as per manufacturer standard. Costs should be inclusive of necessary Hardware for fixing of profiles & installation

DOUBLE GLAZED GLASS DOOR WITH FOR COMBINATION OF 8MM + AIRGAP + 8MM TOUGHENED GLASS: Supply & Installation of aluminium Door

frame of size 82X55mm and double glazed stile door frame of size 82x40 mm with necessary seals in natural anodized / black finish with specially designed

Aluminium Hinges (5 Nos.) & Lever Handle in Oval shape SS304 with SS 35mm Backset of 22mm Square Forend with Strike plate. Door should have Lock,

3.02 MR oval escutcheons, strike plate, EPC One Side Key other side knob-70mm and exposed Door closer with EN 3/4 standard rating. Door should have glass 25 Nos. 96089.00 2402225.00

combination of 8mm toughened glass+Airgap + 8mm toughened glass and necessary seals to be provided all around the door frames along with drop down

seal. Profile & hardware should be from same brand to give end to end solution. Cost should be inclusive of installation charges of Door.

WOODEN DOOR FRAMES: Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position

3.03 with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 0.35 cu m 142949.70 49746.50

WOODEN BATTENS: Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for

3.04 rawl plug etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 1 CUM 187277.65 187277.65

FLUSH DOOR SHUTTERS: Providing and fixing on all height prefabricated factory made 40mm thick flush door shutter in existing door frame bounded with

BWP type synthetic resin adhesive & wooden fillers as per IS 848 -1974 shutter should be confirm IS:2202 (part-1) non decorative type flush door of area up

to 1.80 to 2.50 sqm and nothing shall be paid on account of size variation upto 5% plus mimus of make Greenlam, Duro, Century or Equivalent with both side

4mm thick decorative teak veneering of make sapele/white american oak/vintage teak including fixing on all edges 8mm thick second class teak wood

3.05 MR. margin/lipping with 8 mm thick clear vision/frosted glass fitted vertically in flush door shutter of make Saint Gobin, Modi Guard & Hindustan National Glass 18.00 SQM 3203.00 57654.00

fixed all-round by 4mm thick second class teak wood margin/molding and size of cut in flush door shutter will be approx. 200x1800mm or as per approved

drawing and one no. of door rubbershutter finished complete with PU polish all-round i/c SS butt hinges and SS screws all complete as per the direction of

engineer-in-charge. (Note: this item is inclusive of all material, T&P and labour involved and the work shall be executed as per the approved drawing).

WOODEN LIPPING: Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of

door shutter to be measured).

6 Digitally signed by AMIT

FLUSH DOOR FLOOR MACHINE: Providing Double cylinder Floor Spring D-120 for Wooden door with Closing Force EN 4 with Maximum door weight 120

3.07 MR Kg. Maximum door width 1250 mm.Closing speed : 130° Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 8 SET 12232.00 97856.00

6kg, 5,00,000 cycles Tested. approved make and model all complete as per the direction of Engineer-in-charge.

TOP & BOTTOM STRAP: Providing top and Bottom Strap for wooden doors of approved make and model all complete as per the direction of Engineer-in-

FLUSH DOOR DEAD LOCK: Providing and Fixing 160 mm Euro Dead lock with Rose rings for wooden doors of approved make and model all complete as

per the direction of Engineer-in-charge.

FLUSH DOOR LOCK CYLINDER: Providing and Fixing 60 mm Eco Pin Cylinder 1CK SS Cylinder One side knob and one side regular key for wooden

3.10 MR doors of approved make and model all complete as per the direction of Engineer-in-charge. 8 Each 1079.00 8632.00

FLUSH DOOR HANDLE: Providing 32x840 mm SS 304 H type Handle for wooden doors. Material: Stainless Steel.

Finish: Satin Stainless Steel (SSS). of approved make and model all complete as per the direction of Engineer-in-charge.

WOODEN DOOR LOCK: Providing and Fixing Dead lock Back set- 50 mm with Key Hole of approved make and model all complete as per the direction of

Engineer-in-charge.

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on

glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8) with adhesive having minimum tensile strength of 3.5 pound/inch at

73 F (0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if

exposed to direct sunlight) to 15yrs (indoors).

TOILET DOOR MORTIZE LOCK: Providing and Fixing ss 304 D Type Tube Lever Mortise Combi SET with 60 mm Cylinder keyless and Lock Body SS for

wooden Toilet doors of approved make and model all complete as per the direction of Engineer-in-charge.

TOILET DOOR LOCK BODY: Providing and Fixing 240 mm lock body for wooden doors of approved make and model all complete as per the direction of

Engineer-in-charge.

TOILET DOOR CLOSER : Providing and Fixing Door closer Hercules -60 kg for wooden doors of approved make and model all complete as per the

direction of Engineer-in-charge.

TOILET DOOR HINGES : Providing and Fixing SS 304 Hinges Four Ball Bearing 100x75x3 mm (with screws) for wooden doors of approved make and

model all complete as per the direction of Engineer-in-charge.

LACQUERED GLASS: Providing and fixing of 6mm thick annealed SGG Planilaque Evolution (premium GRIHA rated lacquered glass from Saint-Gobain) of

approved color by Architect/ Client / Customer, fixed with SGG ULTRAFIX (compatible neutral core silicon/ double sided tape) on a perfectly leveled 12mm

thick water proof marine plywood / MDF / Mineral fibre board which is mounted on the RCC wall/any other structure. Lacquered glass must be made

3.18 MR industrially (via curtain coating process); opaque (if viewed against a support wall), coated with PU lacquer (50 micron thick); color consistency (measured by 100.00 SQM 5004.00 500400.00

Minolta spectrophotometer CM5081); highly durable (passes PERSOZ hardness test for minimum 220 oscillatios); humid resistant (conforms to BS EN 1036

1999); environmentally friendly (no lead, no arsenic, no copper, noformaldehyde); appropriate recycled content (12% post industrial/ 6% post consumer);

compressive strength (1000 MPa) & tensile strength (40 MPa), same as float glass;

GYPSUM BOARD PARTITION: Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of

frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash

fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm wide having one flange of 34

mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre

by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon

plugs at spacing of 450mm centre to centre, and fixing of boards to both side of frame work by 25mm long dry wall screws on studs, floor and ceiling channels

at the spacing of 300mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of

99mm width (0.9mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat

head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners

(25mmx25mmx0.5mm), joint finisher and two coats of primer suitable for board as per manufacturer's specification and direction of engineer in charge all

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3

(Board with BIS certification marks)

ACRYLIC SOLID SURFACE CLADDING: Supply & Installation of 12 mm thick Thermoformable Acrylic Solid Surface Sheets, over a robust substrate made

out of BWP/ Flexi Ply/ MS- Aluminum sections etc. as required, to achieve stated design intent. ASS in 12mm thickness, shall be manufactured as per

guidelines of ISO 19712. ASS sheets to be cut, pasted and finished over the substrate as provided, to achieve smooth and seamless finish. Item cost include

intend adaptation, supply, freight and installation of ASS sheets to site, wastage, finishing, creating provisions/ cut-outs for accessories and final placement of

table. Work shall be done by company's authorized Quality Network (QN) fabricator, as per satisfaction of Engineer-in-Charge. Colours : Basic, Solid and

small speckled (Group I & 2)

7 Digitally signed by AMIT

WINDOW BLINDS : Providing & supplying of fabric venetian Window Blinds as per the approved sample, consisting of 3" vane size having head rail, rotator

rail and bottom rail made of aluminium alloy extruded profile, powder coated and provided in standard natural white color. The rolling tube should be made up

of aluminium alloy from extruded profile of 34mm dia. The head rail dimensions should be of suitable size according to the length of head rail and space

available and finished with fabric cover matching with the louver fabric. The cassette should conceal the working mechanism rotary-clutch. (White

polycarbonate spring tempered rotary clutch which raises), lower and tilts the blinds. White polycarbonate limit assemblies control vane over-rotation, located

3.21 MR on either side of individual blinds. The room darkening fabric of Blind should be of anti-static polyester vanes which have facings between two sheer layers (50 256.80 SQM 16655.00 4277004.00

mm wide) to reduce glare. Sheer layers should be of white 100% knit polyester, the colors, textures and opacities as approved. The fabric shall be made of

spun- bonded 100% polyester fiber (having green guard certification) treated with soil & dust repellent requiring minimum regular interval cleaning. GREEN

GUARD Gold certified for low-emitting products to maintain Indoor environment. Up to 80% ultraviolet protection with vanes open and 90% with vanes closed.

The shading to be operated by Easy rise mechanism with a continuous cord loop operating system. All parts, components & hardware are in approved shade

as per direction of Engineer-incharge.

PELMET: Fabricate and install pelmet made of 19mm thick board, up to 300mm high and in line with external glazing as per details of Architect. Rate to

include finishing exposed surfaces of the Pelmet with 1mm laminate.

ZINC CLADDING : Supply & Installation of ZINC Titanium (conforming to EN 988 stndards) Interlocking wall cladding panels in VMZINC Pigmento Finish. The

wall cladding system shall comprise of the following as described .ZINC 0.8 mm interlocking panels of 233 mm width and max 2000 mm length. Panels are

formed with interlocking lap at panel edges and smooth, flat pan; designed to be field assembled in sequential installation by engaging edges of each panel to

edge of adjacent panel. Panels are attached to supports/substrates using stainless screws located under edges of the panels The Panels Shall be Installed

over the Aluminium box Section of 50x25x1.6 mm thick @ 600mm c/c horizontal and vertical with Screws/ Rivets of suitable size as recommended by

manufacturer .THe zinc titanium manufacturer shall have regisetered office in India and shall have supplied zinc titanium cladding to government projects in

last 5 years . Installation to be carried out by manufacturer approved installation agencies who has completed zinc cladding projects in India.

3.23a MR Supply & Installation of ZINC Flashings in same finish and material for corners, top, botom, site detailing 6.00 RM 3139.00 18834.00

13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre 100.00 sqm 73.95 7395.00

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare

the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved

brand and manufacture, including applying additional coats wherever required to achieve even shade and colour

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and

3.27 preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-

14.1.2 Charge.

With cement mortar 1:4 (1cement: 4 coarse sand) 100.00 Sqm 560.50 56050.00

5.5mm THICK HDHMR BOARD (BOTH SIDE RAW): Providing and fixing in wall lining, partitions etc. Confirming to ASTM E-84-2021 class1 BOTH side raw,

3.28 MR having even grade low emission, high moisture resistance, fire resistance, borer, termite & fungus resistance, green material and environmental friendly with 50.00 Sqm 504.00 25200.00

necessary fixing arrangement and screws etc. , complete as per direction of Engineer-in-Charge

5.5mm thick HDHMR Board

11 mm THICK HDMR BOARD ( BOTH SIDE RAW ): Providing and fixing 11mm thick HDHMR board in wall lining, partitions etc. both side raw. Extra density,

3.29 MR high moisture resistance, borer, termite & fungus resistance, green material and environmental friendly with necessary fixing arrangement and screws etc.

11 mm thick HDHMR Board 2063.80 SQM 1079.00 2226840.20

5.5mm THICK HDHMR BOARD ( ONE SIDE LAMINATE ): Providing and fixing in wall lining, partitions etc. Confirming to ASTM E-84-2021 class1 one side

1mm decorative Lamination and other side raw, having even grade low emission, high moisture resistance, fire resistance, borer, termite & fungus resistance,

green material and environmental friendly with necessary fixing arrangement and screws etc. , complete as per direction of Engineer-in-Charge

5.5mm thick HDHMR Board 988.40 SQM 720.00 711648.00

ALUMINIUM FRAME: Providing and fixing partition, frame work in 50x25x1.5mm Aluminium Section placed at 600mm centre to centre both ways (horizontal

3.31 MR & vertical) fastened to floor, ceiling and horizontal member. The item includes providing and fixing 50mm thick polyester synthetic insulation as insulation of 1031.90 SQM 1347.00 1389969.30

8 Digitally signed by AMIT

FIBRE WALL COVERING: Supply & Installation of Glass fiber based homogenous Woven/ non-woven .1mm thick, 100-200 GSM Density brethable Wall

Coverings. Material to be fire certified with minimum Euroclass BS1D0 certification under EN13501, no harmful chemical coated with Oekotex Standard 100

3.32 MR certification and non-toxic in nature for closed enviornments with A+ attested for emission in indoor air. Installation to be done over smooth, dry and dust-free 187.50 SQM 1409.00 264187.50

substrate as specified with OEM recommended adhesive by the supplier's authorized installer team. Installation measurement as per the entire area

(concealed/visible) installed. Finished as per satisfaction of E.I.C. PAINTABLE

ITALIAN MARBLE FOR WALL CLADDING: Providing and laying machine cut, mirror polished, Italian Marble of 18mm thickness for wall in linear portion of

the building all complete as per architectural drawings, laid over 20mm (average) thick base of cement mortar 1: 4 (1 cement: 4 coarse sand) laid and jointed

with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed

by the Engineer-in-Charge.

3D ACOUSTIC PET WALL PANELLING: Providing and fixing Smart Acoustical Wall Panels with square edges made of Polyester fiber substrate 12mm thick

with acoustical properties and with an option of 12 colours as per the choice of the Engineer in-charge, providing a minimum sound absorption level of 0.50-

0.90 NRC, to be affixed to wall using Adhesive. The material should adhere to Formaldehyde emission standards of GB18580-2001 class E1, asbestos-free,

non-toxic, non-irritant and recyclable. Material to have fire resistance as per B1 Chinese standards. The sheets to have density of 200 kg/m3 and weight of 2.0

kg/m2. The sheets to be made available as per the V groove design approved by Architect/ Person in charge(attached Pic). Cutting to be in done by supplier

using blade cutting as per requirement.

LAMINATE PANELLING: Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density

3.35 protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

TOTAL WALL FINISHING WORKS 5889866.08 17598116.02

4 MISCELLANEOUS WORKS

MODULAR KITCHEN - UNDER COUNTER STORAGE CABINETS:

Modular kitchen - Under counter storage cabinets:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient number of drawers

made of 18 mm thk.HDHMR board with lamination in frosty white laminate with 0.8 mm laminate complete with 0.8 mm edge banding.All shelves should be

supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm

thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters/ drawers finished in high gloss acrylic of approved make-

Rehau,Ornare,Senosan and having handless profiles.The cabinet boxes of floor units will be supported by 100mm height vertical adjustable legs (Hettich

make) which will be covered with PVC skirting (Rehau or equivalent make) in brushed aluminum finish attached by hardware of skirting. The unit shall be fixed

to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be

considered for measurement and payment. Cabinet boxes size would be varies from 400x580x710MM to 1000x580x710MM (approx.) and join together as

per site requirements etc. Handle Profile, Aluminum Handle Profile for lift ups, O* Hinges, Corner Hinges, PVC legs, Skirting, Connector, Screws, Wall Mount

set complete all as per the direction of Engineer-in-Charge.

MODULAR KITCHEN - OVERHEAD STORAGE WALL UNITS:

Modular Kitchen - Overhead storage wall units:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient number of drawers

made of 18 mm thk. HDHMR board with lamination in frosty white laminate with 0.8 mm laminate complete with 0.8 mm edge banding.All shelves should be

supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm

4.02 MR thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters/ drawers finished in high gloss acrylic of approved make- 9.00 SQM 10249.00 92241.00

Rehau,Ornare,Senosan and having handless profiles. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only

front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size would be varies from

400X320X710MM to 1000X320X710MM (approx.) and join together as per site requirements etc. Handle Profile,Aluminum Handle Profile for lift ups,O*

Hinges,Corner Hinges,PVC legs,Skirting,Connector,Screw,Wall Mount set. Complete all as per the direction of Engineer in Charge.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels .Make.Hettich,Samsung,Irex,Hafale 10 Each 7943.00 79430.00

4.02B MR Providing and fixing of Bottle pulout 200mm. Make Hettich, Samsung,Irex,Hafale 3 Each 11531.00 34593.00

WATERPROOFING: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including

rounding off junction of vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding

off junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting,

4.05 1.1.18 unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable 10.00 cum 494.10 4941.00

in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more.

4.1. Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 5.00 cum 7878.50 39393.00

9 Digitally signed by AMIT

5.9 Centering and shuttering including strutting, propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete 9.00 sqm 392.15 3529.00

5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. 10.00 kg 107.85 1079.00

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 15.40 cum 9344.35 143903.00

6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

6.13.1 Cement mortar 1: 3 (1 cement: 3 coarse sand) 10.00 sqm 1150.50 11505.00

10 Digitally signed by AMIT

DEMOLITION & DISMANTLING WORKS

Demolition of brickwork manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres

lead as per the direction of the engineer in charge

4.12 15.12.2 Dismantling door, windows and clerestory widows (steel or wood) shutter including chowkats, architrave, holdfasts etc complete and stacking within 50 metres 5.00 Nos 502.75 2513.75

Providing & fixing Access Panel of size mentioned below having - 1. Outer aluminium frame - thickness : 1.5mm ( plus 0.2mm thick powder coating) Material

: ENAW6063. 2. Inner Aluminium frame - thickness: 1.5mm (plus 0.2mm thick powder coating) Material : ENAW6063. 3. Corner fittings, inner frame - material:

Hot dipped galvanized steel plate Thickness 2.0mm, with zinc Coating of 200g. 4. Corner fittings, outer frame - material: Hot dipped galvanized steel plate

Thickness 2.0mm, with zinc Coating of 200g. 5. 12mm plasterboard Type: moisture resistant ( MR) in green plasterboard liner. 6. Screw ( self - drilling black

phosphate ) - Material: mild steel C1018 - 1022. 7. Sealing strip, width, thickness - width: 9.0mm, thickness: 4.0mm. 8. Snap Lock ( spring catch/ catch lock ) -

Type of lock: touch latch, Material of lock: plastic ABS, cold rolled steel Q235. 9. Hinge - Thickness : 4.0mm, Length: 82mm; Material: SS2172 ( cold drawn

steel wire ). 10. Powder coating - Color: white, RAL 9010

Providing & fixing Access Panel of size mentioned below having - 1. Outer aluminium frame - thickness : 1.5mm ( plus 0.2mm thick powder coating) Material

: ENAW6063. 2. Inner Aluminium frame - thickness: 1.5mm (plus 0.2mm thick powder coating) Material : ENAW6063. 3. Corner fittings, inner frame - material:

Hot dipped galvanized steel plate Thickness 2.0mm, with zinc Coating of 200g. 4. Corner fittings, outer frame - material: Hot dipped galvanized steel plate

4.15 MR Thickness 2.0mm, with zinc Coating of 200g. 5. 12mm plasterboard Type: moisture resistant ( MR) in green plasterboard liner. 6. Screw ( self - drilling black 2 Nos. 4010.00 8,020.00

phosphate ) - Material: mild steel C1018 - 1022. 7. Sealing strip, width, thickness - width: 9.0mm, thickness: 4.0mm. 8. Snap Lock ( spring catch/ catch lock ) -

Type of lock: touch latch, Material of lock: plastic ABS, cold rolled steel Q235. 9. Hinge - Thickness : 4.0mm, Length: 82mm; Material: SS2172 ( cold drawn

steel wire ). 10. Powder coating - Color: white, RAL 9010 : 600x600

Providing & fixing Access Panel of size mentioned below having - 1. Outer aluminium frame - thickness : 1.5mm (plus 0.2mm thick powder coating) Material :

ENAW6063. 2. Inner Aluminium frame - thickness: 1.5mm (plus 0.2mm thick powder coating) Material : ENAW6063. 3. Corner fittings, inner frame - material:

Hot dipped galvanized steel plate Thickness 2.0mm, with zinc Coating of 200g. 4. Corner fittings, outer frame - material: Hot dipped galvanized steel plate

Thickness 2.0mm, with zinc Coating of 200g. 5. 12mm plasterboard Type: moisture resistant ( MR) in green plasterboard liner. 6. Screw ( self - drilling black

phosphate ) - Material: mild steel C1018 - 1022. 7. Sealing strip, width, thickness - width: 9.0mm, thickness: 4.0mm. 8. Snap Lock ( spring catch/ catch lock ) -

Type of lock: touch latch, Material of lock: plastic ABS, cold rolled steel Q235. 9. Hinge - Thickness : 4.0mm, Length: 82mm; Material: SS2172 ( cold drawn

steel wire ). 10. Powder coating - Color: white, RAL 9010

Providing & fixing Access Panel of size mentioned below having - 1. Outer aluminium frame - thickness : 1.5mm (plus 0.2mm thick powder coating) Material :

ENAW6063. 2. Inner Aluminium frame - thickness: 1.5mm (plus 0.2mm thick powder coating) Material : ENAW6063. 3. Corner fittings, inner frame - material:

Hot dipped galvanized steel plate Thickness 2.0mm, with zinc Coating of 200g. 4. Corner fittings, outer frame - material: Hot dipped galvanized steel plate

Thickness 2.0mm, with zinc Coating of 200g. 5. 12mm plasterboard Type: moisture resistant (MR) in green plasterboard liner. 6. Screw (self-drilling black

phosphate) - Material: mild steel C1018 - 1022. 7. Sealing strip, width, thickness - width: 9.0mm, thickness: 4.0mm. 8. Snap Lock (spring catch/ catch lock) -

Type of lock: touch latch, Material of lock: plastic ABS, cold rolled steel Q235. 9. Hinge - Thickness : 4.0mm, Length: 82mm; Material: SS2172 (cold drawn

steel wire). 10. Powder coating - Color: white, RAL 9010

CUSTOMISED STORAGE UNIT: Supply and fixing of full height storage units (upto 450mm depth) made out of 18mm plywood finished with approved .8mm

4.18 MR laminate on the inside and outside. Hardware used of Hettich make.Compleate as per the direction of Engineer in charge 120.00 SQM 21140.00 2536800.00

TOTAL MISCELLANEOUS WORKS 223321.55 3037913.80

11 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

S NO DESCRIPTION UNIT QTY RATE

2023/ MR AMOUNT AMOUNT

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN MIXER

(WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY)

MR 2 Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE: 630x460x130mm EACH 2 20890.00 41780.00

Supply, Installation, Testing and Commisioning of suitable compatible WASTE COUPLING 32MM-

FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP

Supply, Installation, Testing and Commisioning of BOTTLE TRAP (WITH INTERNAL PARTITION)

MR 4 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & WALL FLANGE EACH 2 3284.00 6568.00

Supply, Installation, Testing and Commisoning of RIMLESS, BLIND INSTALLATION WALL HUNG

MR 5 WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES SET, SIZE: EACH 2 15087.00 30174.00

MR 6 Supply, Installation, Testing and Commissioning of PNEUMATIC CONTROL PLATE EACH 2 6641.00 13282.00

Supply, Installation, Testing and Commisoning of ANGULAR STOP COCK WITH WALL FLANGE

Supply, Installation, Testing and Commissioning of CONCEALED STOP COCK WITH

ADJUSTABLE WITH WALL FLANGE 15mm

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH 8mm

DIA 1.2 METER LONG FLEXIBLE TUBE AND WALL HOOK ALD-CHR-573 or equivalent

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM CONCEALED

MR 10 CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE CONNECTION SET FOR EACH 2 8044.00 16088.00

WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6mm thick hard

board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality

13 conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 12 574.30 6891.60

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun)

iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6

14 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement

mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 2 416.80 833.60

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching

surface after housing G.I. pipe etc.

12 Digitally signed by AMIT

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 20mm nominal outer dia pipes METRE 20 335.00 6700.00

18.7.3 25mm nominal outer dia pipes METRE 20 401.55 8031.00

18.7.4 32mm nominal outer dia pipes METRE 5 518.75 2593.75

18.7.5 40mm nominal outer dia pipes METRE 5 702.95 3514.75

18.7.6 50mm nominal outer dia pipes METRE 5 934.15 4670.75

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing.

18.8 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting

chases and making good the same including testing of joints complete as per direction of Engineer

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes METRE 40 497.80 19912.00

18.8.2 20mm nominal outer dia pipes METRE 40 537.60 21504.00

18.8.3 25mm nominal outer dia pipes METRE 5 627.25 3136.25

18.8.4 32mm nominal outer dia pipes METRE 5 739.30 3696.50

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards

19 and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 2 798.95 1597.90

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil,

waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary

specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),

reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean

outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside

duct / under floor & basement ceiling / external work etc. including chase cutting as required,

excavation and back filling in all kind of soils, suspended from floor under false ceiling or

20 embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of

shuttering for proper completion of the work, breaking and making good the walls and floors etc.

after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5

mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-

charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 40 536.00 21440.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 10 416.00 4160.00

13 Digitally signed by AMIT

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/

Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket,

couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc.

cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete

MR 22 in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 7 536.00 3752.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 7 726.00 5082.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover

with screws and other required fitting complete as required.

Supply, Installation, testing and commisioning of toilet waste water super quiet portable pumping

station. Pump upto vertical 5 meters and horizontal 100 meter from toilet to vertical shaft with inlet

connection in portable pump side inlet of 50, 75, 110 as per requirement to complete the work as

per the directions of engineer in charge

Providing and fixing stainless steel tray below sewage pipe of size 200x200x200 mm of grade

SS304 including all accessories

Supply, Installation, Testing and Commisiong of HIGH FLOW SINGLE LEVER CONCEALED

DIVERTOR FOR BATH & SHOWER

Supply, Installation, Testing and Commisiong of SPOUT FOR BUILT IN BATH/SHOWER MIXER

Supply, Installation, Testing and Commisiong of OVERHEAD SHOWER 350x350MM ROUND

MR 29 EDGE SQUARE HEAD SINGLE FLOW (BODY & FACE PLATE STAINLESS STEEL WITH EACH 1 24100.00 24100.00

CHROME PLATED) WITH RUBIT CLEANING SYSTEM

MR 30 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 3 12004.00 36012.00

MR 31 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 2 4392.00 8784.00

MR 32 Supply, Installation, Testing and Commisiong of TUMBLER HOLDER EACH 2 4309.00 8618.00

Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH LOWER

MR 34 Supply, Installation, Testing and Commisiong of ROBE HOOK EACH 2 2045.00 4090.00

MR 35 Supply, Installation, Testing and Commisiong of TOILET ROLL HOLDER WITH COVER EACH 2 4978.00 9956.00

MR 36 Supply, Installation, Testing and Commisiong of TOWEL HOLDER EACH 1 3336.00 3336.00

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and

37 making good the walls wherever required :

17.10.1 Kitchen Sink with Drain Board

Supply, Installation, Testing and Commisiong of single lever sink mixer (table mounted) with

MR 38 extractable hand shower dual flow complete with 1.2 m long tube with 450 mm long braided hoses EACH 1 8131.00 8131.00

14 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR E&M TOTAL AMOUNT TOTAL AMOUNT

DSR E&M TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with

1.10 modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC

insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent switch

etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed

A.2 PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

A.3 1.12 cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC Metre 12920 334.00 4315280.00

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 386 122.00 47092.00

1.24.5 6 pin 15/16 amp socket outlet Each 79 197.00 15563.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding

A.5 1.26 modular plate as required. Each 200 40.00 8000.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated

1.14 copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

B.1 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 439.00 21950.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 280 1005.00 281400.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 280 1365.00 382200.00

15 Digitally signed by AMIT

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured

cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(b) 3.5 C x 95 Sqmm XLPE cable RM 100 864.00 86400.00

(c ) 3.5 C x 70 Sqmm XLPE cable RM 100 680.00 68000.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 100 510.00 51000.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 100 378.00 37800.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper conductor

C.3 MR armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI

(a) 4 C x 16 Sqmm XLPE copper cable RM 400 1446.00 578400.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 100 2253.00 225300.00

(c ) 3.5 C x 35 Sqmm XLPE copper cable RM 50 2686.00 134300.00

(d) 3.5 C x 50 Sqmm XLPE copper cable RM 50 3224.00 161200.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker

2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But

D.4 without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 14 9081.00 127134.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual

2.14 current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

16 Digitally signed by AMIT

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way for floor box.

E.2 MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box box. Set 2 577.00 1154.00

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box along

E.3 MR with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and single cable Set 2 12106.00 24212.00

outlet/ glavanized steel, paint RAL 7031 for floor box .

Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for Floor

E.4 MR Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and Set 2 6803.00 13606.00

single cable outlet/ glavanized steel, paint RAL 7031 for floor box.

Supply, installation, testing & Commissioning of flat support plate 8 module for integration of

Mechanism for Floor Box

Supply, installation, testing & Commissioning of waved support plates for 4 module (2x2) modules

E.6 MR for Floor Box Set 2 1533.00 3066.00

Supplying and fixing following modular switch / socket on the existing modular plate & switch box

1.24 including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 28 148.00 4144.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 50 3603.00 180150.00

E.9 (b) 225mmx38mm(GI) - 3 compartment Mtr 75 2960.00 222000.00

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the

intersection of raceways supplied completely with base and cover plates, height adjustable junction

box 65- 90 mm including all accessories ss plate of 3mm thick complete in all respect as per the

E.10 directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,

E.11 1.19 shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 1120 47.00 52640.00

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in surface/

1.21 recess including cutting the wall and making good the same incase of recessed conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S. cable

trays of perforation of not more than 17.5% in convinient sections, joined with connectors

E.13 suspended from the cieling with MS suspenders including bolts and nuts painting suspenders etc as

17 Digitally signed by AMIT

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 100 1137.00 113700.00

Supply, Installation, Testing and Commisioning of USB charger- 3000mA/15 Watts- Type C- 1

module complete in all respect

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 SET 10 13838.00 138380.00

metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 2000 70.00 140000.00

G PANEL BOARDS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning

the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA sheet, dust and

vermin proof, outdoor type double door with canopy, TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear

access for cable alley and with segregated bus-bar chamber with tinned aluminium bus bar and

including supplying and fixing following switchgears, meters and accessories, inter-connections,

bonding to earth, powder coated painting and marking as specified. Switch boards complete as per

schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as detailed in

the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 200 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 250 Amps capacity with heat shrinkable colored sleeves

and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports

& their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB - 6 Nos.

(b) 40 Amps, TPN, MCB - 4 nos

Panel complete as above Each 1 250000.00 250000.00

G.2 MR Floor Panels

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning

the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA sheet, dust and

vermin proof, indoor type TPN Panels with hinged lockable doors fabricated from 2mm thick CRCA

sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear access for cable alley and with

segregated bus-bar chamber with tinned aluminium bus bar and including supplying and fixing

following switchgears, meters and accessories, inter-connections, bonding to earth, powder coated

painting and marking as specified. Switch boards complete as per schematic diagram:

Type of construction: Form 3

18 Digitally signed by AMIT

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as detailed in

the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 200 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 250 Amps capacity with heat shrinkable colored sleeves

and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports

& their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB - 4 Nos.

(b) 40 Amps, TPN, MCB - 6 nos

Panel complete as above Each 2 250000.00 500000.00

G.3 MR UPS Output Panel

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning

the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA sheet, dust and

vermin proof, indoor type TPN Panels with hinged lockable doors fabricated from 2mm thick CRCA

sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear access for cable alley and with

segregated bus-bar chamber with tinned aluminium bus bar and including supplying and fixing

following switchgears, meters and accessories, inter-connections, bonding to earth, powder coated

painting and marking as specified. Switch boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as detailed in

the Specifications

Colour: Gray Powder Coated, as per approved sample.

One (1) nos, 200 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 320 Amps capacity with heat shrinkable colored sleeves

and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports

& their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB - 2 nos

(b ) 40 Amps, TPN MCB - 6 nos

Panel complete as above Each 1 200000.00 200000.00

H SAFETY ITEMS

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2 mm

H.1 2.21 thick, and vitreos enamelled white on both sides and with iscription in single red colour on front side Nos. 6 269.00 1614.00

19 Digitally signed by AMIT

Supply, Installation, Testing and Commissiong of Hot-swappable Modular Type 50 KVA/KW (2 no

25 kva module + 1 no of 25 kva redundant module)True Online Double Conversion UPS 3Phase

Input - 3Phase Output UPS having Decantralized Architecture. Module size should be 25 kVA with

multi controller. IGBT Based Rectifier and IGBT Based Inverter Batteries:12 V, SMF

I.1 Amararaja/Exide with minimum VAH capacity of 40000 suitable for 30 minutes backup with each Nos. 1 1973025.00 1973025.00

ups Along with Accessories Rack, Interlinks, SFU, DC Cable Upto 5 Meters complete in all respect

as per the directions of the engineer in charge. UPS should have availability of Input /Output

isolator, Inbuilt manual bypass along with phase sequence corrector. UPS Efficiency shall not be

Total of Electrical items 9597988.00 6183131.00

20 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

E&M 2022 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically

sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules,

microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant,

vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the

rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The

unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be

filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions

shall not be less than 3.1 and IEER not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF

Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan

section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX

Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports,

vibration isolation, cord less remote control etc., suitable for operation on

2 MR single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity

of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

The indoor shall be able to deliver min 400CFM/TR

Supply, installation, testing and commissioning of following minimum capacity 1 (ONE)-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-

filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section

with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

3 supports, vibration isolation, cord less remote control etc., suitable for operation on

MR single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity

of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

The indoor shall be able to deliver min 400CFM/TR

Digitally signed by AMIT

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall

type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic

expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc.,

3 MR suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The

unit shall have automatic force shut down provision in case of fire on receiving signal from BMS

System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19

Degree C WB temperature. The indoor shall be able to deliver min 400CFM/TR

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T" Joints

4 i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete

5 MR with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric

nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid

lines, all accessories as per specifications etc. as required :

5.1 MR 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 480 420.00 201600.00

5.2 MR 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 600 514.00 308400.00

5.3 MR 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 480 701.00 336480.00

5.4 MR 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 600 794.00 476400.00

5.5 MR 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 150 981.00 147150.00

5.6 MR 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 150 1075.00 161250.00

5.7 MR 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1262.00 63100.00

5.8 MR 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1449.00 72450.00

6 MR Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as

Supply, installation, testing and commissioning of PVC drain water with necessary clamps, fittings

such as bends tees etc. and duly insulated.

40 mm dia (9mm thick insulation) Rm 1080 350.00 378000.00

25 mm dia (9mm thick insulation) Rm 200 234.00 46800.00

Total HVAC-VRV WORKS 0.00 7178169.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR (E & M- NON DSR

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT

2022)/ MR AMOUNT

VAV BOX (WITH INTEGRAL SOUND ATTENUATOR)

Supply and Installation of pressure independent rectangular VAV unit with integral sound attenuator made

of 22G GI sheet casing length 900mm consisting of 25mm thick 48kg/m3 density fiber glass wool covered

with tissue paper ,elliptical volume control damper , calibrated differential pressure sensor (DPT sensors)

at inlet complete with digital Thermostat.(All VAV shall be factory calibrated).

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD) 380-400 VAC, IP-54

MR Chassis, RFI class A1 (C2), No brake chopper.

a VFD upto 35 HP or as directed by the engineer in charge Nos. 2 180000.00 360000.00

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in supply air ducts. Quoted price

3.0 MR shall be inclusive of necessary conduting, copper control cabling from the sensors to the respective VFDs Nos. 4 17500.00 70000.00

as per "Approved Shop Drawings".

Supply, Installation, Testing & Commissioning of Silent type circular /rectangular inline fans for exhaust air

complete with sheet metal casing, 25mm thick acoustic insulation, direct driven centrifugal fan, motor with

proper protection and inspection door. Fan shall be suitable for operation on 220+6 % volts, 50 Hz,1

phase AC power supply. Flanges to be provided on both sides to facilitate duct connections. Fan shall be

4.0 installed as shown in the drawings and will be of following characteristics:

All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be

complete with Plug Top & necessary power cable.

Fans shall have low noise level in rage of 35-40dBA @3m and shall be suitable for indoor installations.

a 200 CFM S P of 13-14 for Toilet Nos. 1 6449.00 6449.00

b 500 CFM S P of 13-14 for Kitchen Nos. 1 9500.00 9500.00

5.0 Tube Axial Fan

Supply Installation, testing and commissioning of supply air Tube Axial flow fan of following capacity with

GSS casing and aluminium alloy impellers with high efficiency aero-foil sections, blades, the impeller

directly driven by TEFC induction motor suitable for 3 Phase 50 Hz 415 V ± 10 %, complete as required.

a MR This cost shall include the cost for suitable panel, DOL starter, breakers etc compete in all respect as per

the directions of engineer in charge.

9000 cfm at 15 mm static presuure for fresh air/exhaust air With Class "H" insulation. NOS 4 143910.00 575640.00

Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return air

path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring

return so as to close the damper in the event of power failure automatically and open the same in case of

6.0 16.20 power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The

damper shall also be closed in the event of fire signal complete as required and as per specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

Digitally signed by AMIT

GI Gravity Louver

7.0 MR Supply, installation, testing and commissioning of GI Gravity Louver complete with neoperene rubber

gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

8.0 VOLUME CONTROL DAMPER

MR Supply, Installation and Testing of GI box type volume control dampers as per the specifications and shop

a drawings. SQM 15 5900.00 88500.00

- For Rectangular Ducts

Supply, Installation, Testing and Commisioning of powder coated GI sheet metal factory fabricated flat oval

ducting with fittings and gripple wire supports. The factor of gripple support to suit the duct weight with

necessary anchor fastners and hook arrangements with suitable thickness etc., confirming to SMACNA

9.0 MR standards. Duct should be fabricated by using CNC machines including neccesary civil works as per site

condition. The joints shall be seamless and ducts joining shall be done using rivets only. The ducts shall be

powder coated with RAL color as per architect approval. The complete ducting cost shall be including 9 mm

thick nitrile rubber thermal with insulation internally. The insulation used for factory lining shall be of self

a MR Thickness 0.63 mm sheet SQM 800 1721.00 1376800.00

b MR Thickness 0.80 mm sheet SQM 400 2023.00 809200.00

c MR Thickness 1.00 mm sheet SQM 250 2340.00 585000.00

d MR Thickness 1.25 mm sheet SQM 100 2900.00 290000.00

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control

dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume

control dampers complete as required

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium

volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume

control dampers with anti smudge ring & removable core.

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the outlet of air handling

14.0 MR units/ductable split units//inline fans. Flexible connections shall be constructed using imported fire retardant RM 100 1440.00 144000.00

fabric with extruded aluminium frame/flange on both sides of approved make.

Supply, Installation, Testing and Balancing of linear slot diffusers as per the approved shop drawings and

specifications. Each slot shall be 25mm wide. The diffuser face shall be a one piece extrusion so there are

no visible joints. Slot diffusers shall be complete with end caps either as end plates or end angles or

integral part, air control blades etc. Slot diffuser have a variable neck length and the diffuser face could be

15.0 MR optionally be fitted to the plenum box on site. Diffuser shall have provision to access collar dampers for air

All Return air diffusers in false ceiling to be properly supported from real slab using chains or gripple wires.

3 slot/2slot, powder coated extruded aluminium diffusers of approved colour & shade. SQM 10 12500.00 125000.00

Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at the suction of fresh

16.0 MR air/discharge of Exhaust air as per the specifications and shop drawings. Sample of bird screen to be got SQM 10 5436.00 54360.00

approved from consultants and Clients prior to procurement.

Digitally signed by AMIT

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile

rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints

17.0 shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as

per specifications and as required.

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool

having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre

18.0 16.21 covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside SQM 100 708.00 70800.00

surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required

and as per specifications

The Active Air Purification system should consist of Supply, Installation, Testing and commissioning of

Bipolar Ionisation System. The Bipolar Ionisation System shall be of Needle Point Model (Needle Point)

should have Nitinol (nickel titanium) Needles and Carbon Fibre Brush Model, System should produce

positive and negative ions for creating a Bio Climate rich in ions and hence neutralising harmful pollutants

including pathogens, Volatile Organic Compounds and Particulate Matter within the occupied space.The

19.0 ionizer shall be installed at the fan inlet of fan coil units, VRF cassettes, ductless splits, AHU and Ductable

HVAC System. The Unit should accept 12-24 VAC/DC. Product should have UL 867 and UL 2998

certification (for zero ozone emission), UL 2043 (for Fire and Smoke Safety), ISO 16000, CSA C22.2# 187

on atleast any one product. The OEM shall have Efficacy test report on SARS-CoV-2 OMICRON VARIANT

and from any Internationally/Nationally recognised Laboratory.

Smart Indoor Air quality monitor to measure Air quality parameters including AQI, PM1, PM2.5, PM10,

CO2, Humidity and Temperature. In addition to the mentioned sensors of the base device, you can

customize it to measure more parameters by adding extra sensors. This monitor should be a 3-tier

architecture including sensor Hardware, secure cloud infrastructure, monitoring apps including dashboard,

20.0 MR android/IOS apps, where ever requires. Dashboard should be customisable and IOT (Internet of things)

enabled with view and management for all of your locations on one dashboard so that you can easily

identify and address any air quality issues. Sensors should be soft calibratable. The System should be

capable of providing periodic Preventive maintenance for automated after sales support service in form of

notification/ alerts and user interaction through dashboard application.

Air Quality Monitor Nos 1 75796.00 75796.00

Supply, installation testing and commissioning of Router / Supervisory Controller which will manage the

VAV information and communicates on BACnet®/ LONWORKS® protocol to monitor and Control the

VAVs from BMS software on PC in accordance with the approved shop drawings and technical

specifications. Connecting the final daisy loop from all VAV to Supervisory Controller shall be part of the

scope. The communication between Supervisory controller and BMS software in PC should be on IP. Cost

include powder coated Panel for Supervisory Controller of required size with 24 Volts provision which

includes power cable, plug, transformer and with all necessary accessories for mounting on wall in

accordance with the approved shop drawings and technical specifications.

Supply, Laying, Termination of ISI Certified 2 Core 1.0 sq.mm ATSC, FRLS,PVC insulated, Unarmored,

22.0 MR Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with proper ferrules, lugs and Rmt 700 120.00 84000.00

other necessary accessories. The spec shall meet the system manufacturer specifications.

Digitally signed by AMIT

Supply, Laying, Termination of ISI Certified 4 Core 1.0 sq.mm ATSC, FRLS ,PVC insulated, Unarmored,

23.0 MR Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with proper ferrules, lugs and Rmt 400 280.00 112000.00

other necessary accessories. The spec shall meet the system manufacturer specifications.

Supply & Laying of ISI Certified 1" dia PVC Conduit with bends, collar, saddles, saddle base and other

accessories for Signal Cable / DDC Communication Cable

TOTAL HVAC WORKS 2640770.00 7335331.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: LIGHTING

S No Item Description Quantity Unit Rate NDSR Amount NDSR Amount

Supply, Installation, Testing and Commissioning of Pendant luminaire with HPE (High

Performance Efficiency) LED (Light Emitting Diode) system power: 22 W, Luminous flux of

luminaire 2200 lm,Colour temperature of 4000 K, Neutral white, CRI > 90, SDCM 3, 230 V

constant current driver, 70 % of luminous flux after 50,000 operating hours, Energy

efficient LEDs, Direct light emission, Luminaire profile in aluminium, Polyester powder

white coloured coat applied over a 5- stage pre-treatment, snap fit prismatic diffuser for a

homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring,

Electronic control gear, Sliding fixing wire suspension,

Protection class I, IP 40, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%, surge

protection of 2.5 kV.

L=1175 mm, B = 52 mm, H = 64 mm, PL max = 1500 mm.

Supply, Installation, Testing and Commissioning of Pendant luminaire with HE-High

Efficiency LED (Light Emitting Diode) system power: 10W, luminous flux of luminaire 900

lm, colour temperature of 4000K, neutral white, CRI>90, MacAdam 3, T.H.D ≤ 10%, driver

efficiency ≥ 88%, surge protection of 2.5 kV, 230V constant current driver, 70% of luminous

flux after 50,000 operating hours, direct light emission, curved luminaire profile in

2 aluminium, powder coated white, Prismatic diffuser for uniform illumination, Electronic 52 Metres 15500.00 806000.00

Protection class I, IP20

Supply, Installation, Testing and Commissioning of LED Pendant decorative luminiare,

Efficacy: 110lm Lumen: 2800lm CRI>90, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥

88%, surge protection of 2.5 kV, Color Temperature: 4000K SDCM 3 Life Time: L70

50000Hrs 230V Light Throw: Direct light emission Material: Aluminium Optics: Dual

Asymmetric Lens with Raster, UGR<16, Finish: White Control Gear: Electronic Control

Protection Class: I IP 40

27 Digitally signed by AMIT

Supply, Installation, Testing and Commissioning of recessed aesthetic luminaire with LED

(Light Emitting Diode) system power: 25 W, Luminous flux of luminaire 2000 lm, Colour

temperature of 4000 K, Neutral white, CRI > 90, MacAdam 3, T.H.D ≤ 10%, driver

efficiency ≥ 88%, surge protection of 2.5 kV, 230 V constant current driver, 70% of

luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission,

4 Luminaire housing in Sheet metal, Polyester powder white coloured applied over a 5- 11 Nos 8000.00 88000.00

stage pre-treatment, Dual Optics Satin + Prismatic U shaped diffuser, UGR<19, ZHLS

(ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Protection class

MAKE - Regent Tech pro 14 or equivalent in Led Linear, XAL, Philips

Supply, Installation, Testing and Commissioning of Pendant luminaire with HE-High

Efficiency LED (Light Emitting Diode) system power: 26W, luminous flux of luminaire

2080lm, colour temperature of 4000K, Neutral white, CRI>90, MacAdam 3, T.H.D ≤ 10%,

driver efficiency ≥ 88%, surge protection of 2.5 kV, 230V constant current driver, 70% of

5 luminous flux after 50,000 operating hours, direct light emission, curved luminaire profile in 21 Nos 20000.00 420000.00

Anodized aluminium, Prismatic diffuser for uniform illumination, Electronic control gear

Protection class I, IP20, Ø = 600 mm, B = 55 mm, H = 75 mm, PL (max) = 1500 mm.

Supply, Installation, Testing and Commissioning of MAGNETIC LED Surface Mounted

Track Single Phase Finish: Black Control Gear: Electronic Control

Supply, Installation, Testing and Commissioning of Track mounted spotlight with LED

(Light Emitting Diode) system power:20W, luminous flux of luminaire 1800 lm, colour

temperature of 4000 K, Neutral white, CRI >90, 230V constant current driver, direct light

emission, beam angle of 24°, aluminium housing polyester black powder coat applied

over a 5-stage pre-treatment, flexible light body structure can be rotatable and adjustable in

7 horizontal and vertical direction. 31 Nos 9600.00 297600.00

Protection class I, IP20

28 Digitally signed by AMIT

Supply, Installation, Testing and Commissioning of Cove mounted LED strip (flexible), with

60 LEDs per meter, 2835 SMD package with a thermal tape of high thermal convection

factor, system power: 6W/ meter, luminous flux 300 lm, colour temperature of 4000 K,

Neutral White, CRI > 80, 12 V DC, constant voltage driving circuit, Electronic control gear,

Protection Class II, IP20, THD<15%, Driver efficiency>88%, Surge proetction of 2.5kV

Supply, Installation, Testing and Commissioning of LED suspended Mounted decorative

UP-DN 50 UP - 88 DnW Efficacy: 105lm Lumen: 6500lm Up - 9,680 lm Down, Unique wing

shape design, CRI>90, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%, surge

protection of 2.5 kV, Color Temperature: 4000K SDCM 3 Life Time: L70 50000Hrs 230V

Light Throw: Direct-Indirect light emission Material: Aluminium Optics: Opal Diffuser Finish:

White Control Gear: Electronic Control

Protection Class: I IP 20, L: 2349mm mm H: 136mm

Supply, Installation, Testing and Commissioning of Recessed downlight with HPE (High-

Performance Efficiency) with LED (Light Emitting Diode), system power: 15 W, Luminous

flux of luminaire 1500 lm, Colour temperature of 4000 K, Neutral white, CRI>90, MacAdam

3, T.H.D ≤ 10%, driver efficiency ≥ 88%, surge protection of 2.5 kV, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct light

10 emission, housing in die-cast aluminium, Polyester powder white coloured coat applied 92 Nos 1850.00 170200.00

over a 5-stage pre-treatment trim, prismatic diffuser for homogenous light distribution,

UGR<19, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear,

Protection class II, IP 40, Ø = 170 mm, DA(Ø) = 160 mm, H = 59 mm.

Supply, Installation, Testing and Commissioning of Surface Mounted luminaire with HPE

(High Performance Efficiency) LED (Light Emitting Diode) system power: 26 W, Luminous

flux of luminaire 3380 lm,Colour temperature of 4000 K, Neutral white, CRI > 80, 230 V

constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient

11 LEDs, Direct light emission, Luminaire profile in aluminium, Polyester powder white 1 Nos 3200.00 3200.00

coloured coat applied over a 5- stage pre-treatment, snap fit linear prismatic diffuser for a

homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring,

Electronic control gear, Protection class I, IP 40, L = 1188 mm, B = 44 mm, H = 44 mm

29 Digitally signed by AMIT

Supply, Installation, Testing and Commissioning of COB-based recessed Low Height

downlight luminaire Amber, System power: 15W, Luminous flux of luminaire 1350lm,

Colour temperature of 4000K, Neutral White, CRI>90, MacAdam 3, T.H.D ≤ 10%, driver

efficiency ≥ 88%, surge protection of 2.5 kV, 230V constant current driver, 70% of luminous

flux after 50,000 operating hours; Energy-efficient COB, Direct light emission, Luminaire

housing in aluminium, Polyester powder White coloured coat applied over a 5-stage pre-

treatment, anti-glare black reflector with 60 degree beam angle, UGR,19, ZHLS (ZERO

HALOGEN LOW SMOKE) wiring, Electronic control gear

Protection class II, IP 40, Ø = 93 mm, Ø(Cut Out) = 85 mm, H = 60 mm.

Supply, Installation, Testing and Commissioning of recessed with trim luminaire Pinspot

light with LED(Light Emitting Diode) system power: 5W, luminous flux of luminaire 400lm,

colour temperature of 4000K, Neutral white, CRI>90, 230V constant current driver, 70% of

13 luminous flux after 50,000 operating hours, direct light emission, aluminium housing with 20 Nos 1200.00 24000.00

trim, polyester White powder coat applied over a 5 stage pre-treatment on trim, with lens

and a beam angle of 24° and external electronic control gear, Protection class II, IP20

30 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: IT

S No Description UNIT QUANTITY RATE DSR AMOUNT NDSR AMOUNT

A. UTP Components for Data

Supply, Fixing & Laying of CAT 6A UTP cable 23 AWG solid

copper conductors for Connectivity of Hub room to End Point.High Speed

Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded Cable, C6

Supply, Installation, Testing and Comissioning of I/O port for CAT6A cable

2 termination at Work Station end. Keystone Unshielded Outlet, 180DG C6 Nos. 111 187.00 20,757.00

Supply, Installtion, Testing and Commissioning of CAT6A patch cord 2 Mtr (7

3 feet) for information outlet (I/O) to end user device connectivity. High Speed Nos. 111 240.00 26,640.00

Gigabit 24AWG U/UTP Patch Cord, C6

Supply, Installation, Testing and Comissioning of CAT6A patch cord 1 Mtr (3

4 feet) for information outlet (I/O) to Rack End Redantant device connectivity. High Nos. 111 191.00 21,201.00

Speed Gigabit 24AWG U/UTP Patch Cord, C6

Supply, Installation, Testing and Comissioning of 24 port Loaded Jack Panel for

CAT6A cable termination at rack end. Data Active

Supply, Fixing & Laying of High-Speed Gigabit Ethernet UTP 250 MHz Class E

Cables for Category 6 Consists of 23AWG Solid Bare Electrolytic Grade Copper

Conductors, HDPE Insulated Twisted 4 Pair, RipCord, and LSZH Outer Jacket.

6 These structured cables are suitable for Gigabit Ethernet (1000 Base-T) Metre 2820 37.00 104,340.00

requirements for applications such as High-Speed Data, Voice & Video Signals

over LANs, Server Farms, and Other Bandwidth Sensitive Indoor Applications.

Supply , Installtion , Testing and Comissioning of Category 6 UTP RJ45

keystone jacks conform to class E performance. The Press-Fit technology is able

to complete the insertion of the IDC and RJ-45 contacts into a PTH (Plated-

Through Hole) on a PCB (Printed Circuit Board). The connection is established

7 without using solder. Press-Fit technology connections avoid quality problems Nos. 47 150.00 7,050.00

such as cold Spots, voids, splatters, and cracks, and it is highly reliable than

soldering. Press-Fit technology does not use solder, it uses no lead (Pb) and

there is no extra heat on the connections. It makes the connections clean,

reliable, and meets RoHS standards.

Supply , Installtion , Testing and Comissioning of 24 port Loaded

Staggered Jack Panel for CAT6 cable termination at rack end. Voice Active

31 Digitally signed by AMIT

Supply , Installtion , Testing and Comissioning of Category 6 UTP 2 Mtr

Patch cords are manufactured using high quality un-shielded 4 Pair Stranded

cables, and features cable strain relief boot with plug latch protection cap. These

9 high-performance components are available in a broad range of lengths. They are Nos. 47 169.00 7,943.00

designed to meet or exceed Cat6 specifications. Conductors are securely mated

with an unshielded RJ45 plug design to deliver superior performance.

Supply , Installtion , Testing and Comissioning of 2 Port British

Style Shuttered Face Plate white for I/O fixing at user side

Supply , Installtion , Testing and Comissioning of 4 Port British

Style Shuttered Face Plate white for I/O fixing at user side

Supply , Installtion , Testing and Comissioning of 24 port Loaded Staggred

Jack Panel for CAT6 cable termination at rack end. Riser Active

Supply , Installtion , Testing and Comissioning of 400 pair MDF box complete

with Krone Modules

14 Supply , Installtion , Testing and Comissioning of 50 pair riser cable Metre 250 262.00 65,500.00

C. Network Rack and Other Accessories

SITC of 42U 800x1000 Server Rack with perforation, Glass Door, Cable

15 managemenet, 6/16A power strips-2 nos, Castors, 4 fan for cooling, Rack Nos. 2 41,250.00 82,500.00

should have shelves - 4 nos

SITC of router with Aggregate Throughput 6.6Gbps, Total onboard 10G WAN

(1 SM slot and 1 NIM slot, and 2 x 10-Gigabit Ethernet and 4 x 1-Gigabit Ethernet

ports),Memory (DRAM) default 8GB,Storage (M.2 SSD) default 16GB,SD-WAN

IPsec Throughput (1400Bytes) Up to 17Gbps,IPv4 Forwarding Throughput

(1400Bytes) Up to 19.7Gbps,Number of IPv4 Routes 1.6M w/ default 8GB, up to

16 4M w/ 32GB,Number of IPv6 Routes 1.5M w/ default 8GB, up to 4M w/ Nos. 1 838,565.00 838,565.00

32GB,Dimensions (H x W x D) 1.73 in. x 17.50 in. x 16.25 in., Operating

temperature 32 to 104°F (0 to 40°C), Safety certifications UL 60950-1 CAN/CSA-

Laser Safety FDA: Code of Federal Regulations Laser Safety

SITC of firewall with 22 x GE RJ45 ports (including 2 x WAN ports, 1 x DMZ port,

1 x Mgmt port, 2 x HA ports, 16 x switch ports with 4 SFP port shared

media), 4 SFP ports, 2x 10G SFP+ FortiLinks, dual power supplies

redundancy., 3 years Enterprise Protection

32 Digitally signed by AMIT

SITC of L3 Switch with 24-port 10G/1G SFP28 with modular uplinks ,24 ports -

L3 - managed - stackable,Rack-mountable 1U,Switching capacity: 2000 Gbps ¦

Switching capacity with stacking: 3000 Gbps ¦ Forwarding rate: 1488 Mpps ¦

Forwarding rate with stacking: 2232 Mpps,IPv4 routing table entries: 39000 ¦

Flexible NetFlow entries: 128000 ¦ Direct IPv4 routes: 24000 ¦ Indirect IPv4

routes: 15000 ¦ IPv6 routing table entries: 19500 ¦ VLAN IDs: 4094 ¦ Switched

virtual interfaces (SVIs): 1000 ¦ Multicast routing flow table: 8000 ¦ QoS scale

entries: 4000 ¦ ACL scale entries: 5000 ¦ PVST instances: 300 ¦ STP Virtual Ports

for PVST: 13000 ¦ STP Virtual Ports for MST: 13000 ¦ Routed ports: 448,OSPF,

IS-IS, RIP-1, RIP-2, IGMP, VRRP, PIM-SM, OSPFv3, PIM-SSM, policy-based

routing (PBR), RIPng,SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI,

NETCONF, RESTCONF,IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q,

IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP),

IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at, RAM 16 GB,Flash

Memory 16 GB, Expansion Slots 1 (total) / 1 (free) x expansion slot

SITC of Access Switch with minimum of 48-port Data Switch, 48x10/100/1000

copper ports, Software Network Essentials, Virtual Networks 4, Stacking

bandwidth 160GBPS, Total number of MAC addresses 3200, Total number of

19 IPv4 routes (ARP plus learned routes) 14,000 (10,000 direct routes and 4,000 Nos. 3 334,312.00 1,002,936.00

indirect routes), IPv4 routing entries 4000, IPv6 routing entries 2000, Multicast

routing scale 1000, DRAM 4GB, Flash 4GB, Switching capacity 176GBPS,

Forwarding rate 261.9GBPS

SITC of Hardware controller managed Indoor Wi-Fi 6 (802.11ax) Access Point,

4x4 MIMO with four spatial streams, 2.4 GHz, peak gain 3 dBi, internal antenna,

omnidirectional in azimuth, 5 GHz, peak gain 4 dBi, internal antenna,

omnidirectional in azimuth, 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) –

IEEE 802.3bz, Management console port (RJ-45), USB 2.0, 2048 MB DRAM,

SITC of Access Switch with minimum of 48-port POE Data Switch,

48x10/100/1000 PoE ports,Software Network Essentials,Virtual Networks

4,Stacking bandwidth 160GBPS,Total number of MAC addresses 3200,Total

21 number of IPv4 routes (ARP plus learned routes) 14,000 (10,000 direct routes Nos. 2 446,706.00 893,412.00

and 4,000 indirect routes),IPv4 routing entries 4000,IPv6 routing entries

2000,Multicast routing scale 1000,DRAM 4GB,Flash 4GB,Switching capacity

176GBPS,Forwarding rate 261.9GBPS

22 SITC of 10 Gig SR transceivers/equivalent LC connector MM Nos. 16 19,638.00 314,208.00

SITC of Wireless Controller with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-

TX specification, 1000BASE-T, 1000BASE-SX, 1000-BASE-LH, IEEE 802.1Q

23 VLAN tagging, IEEE 802.1AX Link Aggregation, Web-based: HTTP/HTTPS, Nos. 1 457,446.00 457,446.00

Command-line interface: Telnet, Secure Shell (SSH) Protocol, serial port

24 SITC of Fiber Patch Cords Nos. 16 2,500.00 40,000.00

33 Digitally signed by AMIT

34 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: EPBAX SYSTEM

S No Item Description UoM QTY Rate DSR Amount NDSR Amount

Supply Installation Testing & Commissioning of proposed IP-PBX/ PABX/ Communication System should employ IP at its core with IP switching technology. It should have a Pure IP architecture with embedded

hardware platform support to meet the technological demands of the present and future. The system should be IPv4 and IPV6 ready. Preference would be given to the manufacturer having DSIR recognized R&D.

Preference would be given to the indigenous design manufacturer and made in India product. The system should have VoIP at its core i.e. VoIP modules should be mounted on the CPU itself. The system should

support SIP/IP extensions and trunks over SIP protocol. It should be possible to support SIP Trunks and SIP/IP Extension with the single VoIP module. It should support up to 99 SIP trunks and 2100 SIP/IP users

(SIP/IP Phone, Mobile softphones, UC Client). The system should TDM ports through Gateways. It should be possible to reach the maximum capacity of the system of 2100 IP users without any add-on CPU or

chassis/hardware platform. The architecture of the system should be capable of seamless migration to its maximum capacity by simply purchasing a license for the same. The architecture should be non-stackable

which eliminates the individual power supply needed for each chassis required otherwise. VoIP should be a Daughter-board module mounted on a CPU. VoIP module(s) should support up to 550 concurrent VoIP

channels without transcoding, 248 concurrent VoIP channels with transcoding, 99 SIP trunks and 2100 SIP/IP users (SIP/IP Phone, Mobile softphones, UC Client).

Voicemail features should be inbuilt in the system and should not require any additional hardware module. Voicemail features should be available to all the users connected to the system without any license. The

system should have adapter based power supply with output of 24V DC, 2.5A. It should have dual power supply port for Hot redundancy. The system should support at least 21 concurrent Call Tapping and

Conversation Recording. It should support a minimum 50 concurrent IP-IP Video calls without using any VoIP Channel. The system should support UC Clients with following UC features:

Presence and Chat, Video Calling, Busy Lamp Field, Abbreviated Dialing (Global and Personal), Contact Grouping Drag and Drop Conference, Call Management - Call, Hold, Transfer, Forward, DND & Intercom,

Corporate Directory Integration, MS Outlook IntegrationCall Transfer & Direct Call to other User's Voicemail, Handover, Calendar Integration, Click to Call , Menu options - Call Pickup, Paging, Message wait, Call

Retrieve, Alarm and Reminder, Dynamic Lock, Dial-In Conference, CLIR, Room monitoring & Call supervision, Multi-party Audio Conference, Drag and Drop Transfer, The system should support SIP over TLS and

SRTP to ensure VoIP call security over IP network. Following security features should be supported in the proposed system: System should have provision to notify system log/activity to the administrator by email

notification. System should provide reports of faults/activity through GUI in printable format in online/offline mode System should have buffer of storing minimum 500 faults/error logs System should have 1,921,935.00 1,921,935.00

notification of all alarms. All system activity and fault logs should be saved in the system. The system should have MD5 Authentication for SIP and AES128 Password Protected Configuration by Admin and User.

Password Protection should have following features: The system should check the age of password before login into the system. The system must require the user to change the password after every 90 days.

Changed password must not be the same as the previous password. The system should not allow the access of the Telnet and FTP server of PBX by any user. The system must require the user to generate a

strong password consisting of alphanumeric and special characters for System Login. The system should have two-level access for users with different access rights. System should have two Gigabit Ethernet

ports for LAN and WAN to separate out local and VoIP traffic on the external network. System should have two external USB port to support various applications It should have built-in multi-party conferencing. It

should be possible to carry out at least 21 conferences of 3-participants at a time. The maximum number of participants in a single conference should be atleast 64. The system should have built-in Auto-attendant

facility and should be able to answer up to 64 calls simultaneously and should support dial-by-name.

The system should support multilingual IVR in at least 6 different languages in Auto-attendant. The system should have built-in web based software programming tool for system administration. The system should

have a built-in remote maintenance facility i.e. it should have the facility to be programmed remotely over the internet without any modem required on the system side. The system should have programmable call

ringing sequence with options such as simultaneous, hunting off, round robin and delayed simultaneous. Detailed reports of all system parameters should be generated through the SMDR port of the system. The

system should support flexible numbering for extensions up to 6 digits. Access codes, system timers and access to features should be programmable. The system should be able to generate and store outgoing,

incoming and internal call reports on SMDR port. It should also be available online through Ethernet Port. The system should support USB drive up to 256 GB for storage up to 8680 hours. The system should be

able to send the back-up data to Network drive.

The system should store a Call Log Buffer of at least 6000 Outgoing, 4999 Incoming and 999 Internal calls.

The system should support dial from the corporate directory which should store minimum 2999 numbers and should be possible to make abbreviated number dialing, all complete

IP Phone Should Be Display: 128 x 64 –pixel Graphical LCD (3.1 Inch)

LED for Call and message wait Indication Intuitive user interface with icons

Feature Keys 3 Feature Keys : Headset, Mute , Hands-free speaker phone

4 Context Sensitive Keys 2 Line keys Function such as navigation, Call Appearance , feature status ∙ Volume Control Keys, Interface 2 X RJ45 10/100/1000 Mbps Ethernet Ports

Power Over Ethernet (IEEE 802.3af), 1 x RJ9 Handset port, 1 xRJ9 Headset port DC Power Jack

Enhanced Desktop Viewing LED for Call & message wait indication Intuitive user interface with Icon

Clear Voice Codec: G.722, G.711(A/μ), G.729, G.723

DTMF: In-band, Out-of-band

(RFC 2833) and SIP INFO

Full Duplex Speakerphone with VAD, CNG, AEC, AJB & AGC

Power Supply Power on Ethernet (IEEE 802.3af) .5VDC 0.6APower Consumption

1W(Typical)Operating temperature : 0°C to 45°C Operating Humidity : 10 ~ 95%

Desk mount External AC Adaptor, Certification: CE, FCC,EMI- EMC, SAFETY,ROHS

Secure Communications Extended (Proprietary) SIP Protocol TLS/SRTP for Voice Security

SITC of IP Phone

· 2 x 10/100/1000 Mbps LAN & PC Ports

· Graphical LCD with Backlit

· LED for Incoming/Ongoing Call, Mute, Hold

· Add on 32 key module support, maximum key modules shall be supported

· Intuitive User Interface with Icons

· Multiple Languages Caller ID with Name, Number

· 45 or more keys including 4 Context Sensitive Hard Keys

3 · RJ9 Handset Port,RJ9 Headset Port,3.5 mm Headset Port Nos 37 13,275.00 491,175.00

· Installation: Wall Mount, Table-top

· CE,FCC-15,RoHS, Power over Ethernet (IEEE 802.3af)

· Power Consumption: 5W (Typical)

· Connector: DC Power Jack, 5VDC/600mA

· Operating Temperature Range =0 to 45°C

· Storage Temperature = 0 to 55°C

· Message wait Lamp, Ringer Lamp, Voice Mail, Call Pickup– Group and Selective, Paging. Key Feature Mute, Call Hold, Do Not Disturb, Speed Dial, Hotline, Redial, Call Back, Auto Answer, Call Forward,

Call Waiting, Call Transfer, Room Monitoring, Conference, Directory, Call Logs, Paging Dial-by-Name

35 Digitally signed by AMIT

SCHEDULE OF QUAMTITES: CCTV SYSTEM

S.No. Description of Items Qty Unit Rate DSR Amount NDSR Amount

SITC of 5MP IR Vandal Proof Dome Network Camera Lens Size: 3.0mm – 13.5mm motorized

vari-focal lens, Aperture F1.4 – F3.2, NDAA Compliance approved, Security: SSL Encryption,

Multi-User Authority, IEEE802.1x, IP Filtering, HTTPS , IR Distance : 30M IR, Memory

Support : Micro SD 512 GB, Two-way Audio Communication supported, Audio Compression

Algorithm: ADPCM 16K, G.726, G.711 u-Law, G.711 a-Law DC12V/PoE, IP67 and K10

rating, Image Sensor: 1/2.8” CMOS Maximum Resolution: 2592 x 1944, 11, Video Resolution:

640x360, Video Compression : H.265, H.264, Dynamic Range: 120dB, True Day & Night: Yes

(ICR) MJPEG Scanning Mode: Progressive Scan COLOR : 0.15 lux @ F2.0 B/W : 0 lux (IR

LED ON), Shutter Speed (Auto) 1/10000s~1s, True day/night, WDR 120db, 3D DNR, HLC &

1 BLC, Must support Four Stream simultaneously, Camera shall confirm ONVIF Profile S, 23 Nos 60,500.00 1,391,500.00

Smart codec by ROI, MTBF time 1,25,000 Hours @40 degree (Report to be submitted),

Inbuilt Analytics Motion Detection, Alarm in, Tampering and Trip Zone, Shall provide

Quadruple streams, Object , SSL Encryption, Multi-User Authority, IEEE 802.1x, IP Filtering,

HTTPS , Operating Temperature: -40°C ~ +55°C (-40°F ~ +131°F) , Operating Humidity: 0%

to 90% non-condensing, Certification: BIS/UL, FCC, CE approva, NDAACompliant . MAC

Address: The MAC address of the proposed IP cameras must be registered in the same

name of the OEM. The IP Camera OEM must confirm that the MAC address of the

surveillance cameras; OUI must be in the name of the OEM. etc complete as per

specifications of this and directions of Engineer-in-Charge.

36 Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of 32 Channel IP network video recording

capability Rack mount NVR with Redundant Power Supply and minimum 4/8 Slots, should

support H.264/H.265 compression, network incoming throughput of 850 Mbps and 12MP

recording resolution, time division multiplexing, real time recording of multiple cameras,

storing digitized and compressed images on internal hard disk drives for fast search and

retrieval either locally at the unit, or from a remote workstation using a Graphical User

Interface (GUI), should allow all connected cameras to be discovered and configured

automatically, simultaneous live view, record, play back, data transmission in real time,

maximum throughput of 400 Mbps, UHD 1920 ips, support H.264/H.265 compression, 2X –

12X digital zoom in live view mode, 2X – 12X digital zoom in playback mode, time lapse,

event, time lapse + event, pre / post-event, panic recording schedule, recording bitrate control

mode: CBR and VBR, alarm, audio, motion, trip zone, video loss, text-in, system event

2 triggering, fan error, record failure, storage related alerts and alarm in error, email, remote 1 Nos 518,000.00 518,000.00

notification (call back) to remote work stations, mobile device push notification, Time-lapse,

Event log, Motion, Thumbnail, Text-in search options, SSL, Password encryption options,

network keyboardfor controlling the NVR and PTZ, 1 Gigabit Remote Client port, 4 Gigabit

ports, ONVIF compliant , output interface 1 HDMI (up to 4K), 8 internal SATA ports (10TB per

SATA) with recording capacity up to 80 TB or more , RAID support as 1,5,10 - user may

choose & configure as per security needs on internal SATA , redundant dual power supply as

failover,2 x USB for backup /upgrade etc., complete as required. The NVR should have

internal Admin service, monitoring servics, Left object detection. In addition the NVR should

be compatible to AI cameras, ANPR cameras for future. The NVR should also support

Failover services in 10:1mode. Certification: BIS/UL, FCC, CE . etc complete as per

specifications of this and directions of Engineer-in-Charge.

Supply Installation Testing Commissioning of 6 TB HDD as per specifications of this tender

etc complete as required and directions of Engineer-in-Charge.

Supply Installation Testing Commissioning of LED Display 55" Smart LED TV 138 cm/ 55"

colour Ultra HD (4k), professional/commercial monitor having 24 X 7 operation, with USB Port

2, HDMI Port 3, HDMI (ARC), 2 channels, 20 W Speaker output power, AC4 audio format,

4 Stream content from devices, Wifi facility, dolby digital plus surround sound technology i/c 1 Nos 99,550.00 99,550.00

making connection, testing etc. complete as required as per specifications of this tender etc

complete as required and directions of Engineer-in-Charge.

Supply Installation Testing Commissioning of 24 port POE Switch Giga, 24 x Gigabit Ethernet

Ports ,48 Gbps Switching Capacity , 256KB RAM Buffer, Switching Bandwidth 48 Gb/s,

Packet Buffer 256 Kb. As per specifications of this tender etc complete as required and

directions of Engineer-in-Charge.

Supply Installation Testing Commissioning of 9 U rack with accessories like PDU FAN Stand

6 etc all complete as per specifications. as per specifications of this tender etc complete as 1 Nos 18,900.00 18,900.00

required and directions of Engineer-in-Charge.

Supply Installation Testing Commissioning of Cat 6 Cable all complete as per

7 specifications.as per specifications of this tender etc complete as required and directions of 610 Metre 60.00 36,600.00

Engineer-in-Charge.

37 Digitally signed by AMIT

Schedule of Quantities: Integrated Access Control System

S No Description of Items Qty Unit Rate DSR Amount NDSR Amount

Supply, Installation, Testing & Commissioning of Enterpise Access Control and T&A software with Intrusion and Alarm Managment Features. software

should offer a comprehensive solution for managing biometric devices, card readers, QR Reader, Bluetooth Readers, NFC Readers and access

controllers. It should enable users to enroll individuals' biometric data and controller information within a single enrollment process. This ensures

convenience and efficiency for system administrators. Additionally, the software should support modules such as Access Control, Time & Attendance,Visitor

Management, Vehicle Access Management, Mobile based Attendance, Guard Tour Management, and other relevant functionalities, all utilizing the same

database, No separate database for any of the module will be allowed except third party Integration if required, This promotes future scalability and

streamlined data management , The Time & Attendance software provides a comprehensive set of flexible functions to meet various organizational

1 requirements. These functions include the ability to manage multiple organizations, implement late-in and early-out policies, define overtime policies, handle 1 Nos 354,000.00 354,000.00

absenteeism, manage multiple holidays and holiday schedules, manually enter and correct entry-exit events, and generate attendance summaries. These

functions offer versatility in managing and monitoring employee attendance effectively. Software should be a certified that meets the ISO 9001:2015

(Quality Management Systems), ISO 14001:2015 (Environmental Management Systems), and ISO 27001:2013 (Information Security Management

Systems) standards. These certifications validate the Software adherence to internationally recognized standards in quality, environmental responsibility,

and information security.The Software shall have "Vulnerability Assessment Security Closure Report of Access Control and Time and Attendance Software"

along with Audit Certificate should be issued Cert-In Empanelled government Organizations CDAC/STQC etc.

Supply, Installation, Testing & Commissioning of Integrated Visitor Managment System a.Mandatory fields for visitor pass issue

b. Whether appointment is must for every visitor

c. Whether Access Card issue to visitor is compulsory

d. Whether visitor request to be approved by the group administrator

e. Whether Email based approval

f. Sending of Email/SMS to the approved visitor

g. Sending Email/SMS to the employee on visitor arrival

h. Pop up on Employee’s system on visitor arrival

i. Banned visitor notification

j. Lapse Time (Time after which appointment will get expired)

k. Default Departure Hours (if some other time is not set)

l. Pre Appointment hours ( Time before the scheduled appointment during which pass can be generated) all complete as per tender specs.

Supply, Installation, Testing & Commissioning of Access IP Controller with Enclosure and Power Supply Unit : 2 Door 4 Reader with RS485 OSDP, Security

Features: Authorized IP address filtering, IP Client Proxy Host communications protected by TLS 1.2/1.1 or AES 128/256 bit data encryption for optimal

data protection, Crypto memory chip, IO Expansion connection protected by AES Capacity: Cards/Users : 240000 Offline Event Log: 5,0000 &

Communications Built in TCP/IP, IPV4, IPV6, RS-485, Inputs: Seven unsupervised/supervised, Two unsupervised dedicated for cabinet tamper and UPS

fault monitoring, Outputs: Four relays, Power : 12 to 24 Vdc 10 %, 500 mA maximum , Supports up to 520 inputs and 516 outputs, 16 card formats per

3 active reader, 8 per offline reader, Open Supervised Device Protocol (OSDP) and OSDP SC compliant, Anti-passback support, Area-based, reader-based, 2 Nos. 196,670.00 393,340.00

or time based Nested area, hard, soft, or timed forgiveness, Encrypted database, Supports up to nineteen (19) digit card numbers, Intrusion Alarm

Functions: Area monitoring, Standard alarm masking , Fire Integration; open all doors from hardware itself, Temperature:- 55 to +85 °C, storage, 0 to +70

°C, operating, Humidity: 5 to 85 % RHNC, Micro USB Port, SD card upto 8 GB. Certifications and Compliances:UL294 Recognized, FCC Part 15 Subpart B,

CE Compliant, RoHS, NIST Certified Encryption etc. as per specifications of this tender etc complete as required and directions of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of Facial Recoginition Reader with RFID and QR Code Read, Biometric: Face Recognition , Barcode and

QR code: Device should support QR code reader, RF Option: Universal Multi Card Reading module which readers which works on 13.56MHz frequency,

MIFARE, MIFARE Plus, DESFire, DESFire EV1/EV2/EV3, HID iclass, RF detection distance: Minimum 30 mm, Mobile Credential:Frequency: 13.56MHz

NFC, Frequency: 2.4GHz BLE Certificates: ISO 27001, Encryption: AES-128/256, Compatible devices: iOS and , Android , CPU: 1.5 GHz Quad Core or

better Memory: 32 GB Flash + 4 GB RAM or higher Algorithm Benchmarking: Algorithm used should be NIST Listed Single OEM for Software and

Hardware Device Manufacturer & Algorithm manufacturer should be from the same OEM.Database Encryptio: AES 128 bit /256-bit method, GDPR or

Personal Data Protection (PDPB India): Must be supported with ToC (Face Template on card) Crypto chip Supported, LCD type Minimum: 5-inch IPS color

LCD LCD resolution: Minimum 720 x 1280 pixels, Sound 16bit, Operating temperature: -20°C to 50°C, Operating humidity: 0% to 80%, non-condensing

Camera : 2MP 2EA, Dimension : Compact form-factor, IP rating (without external enclosure): IP65 or higher, IK rating: IK06 or higher, Recognition Distance

: 0.6 to 1.0 m, Recognition Height : 1.4 to 1.9 m, Mask detection: Must support variety of masks (N95, 3-ply, Fabric), Matching speed : Within 0.3 seconds,

4 Enrollment Methods: Must support upload a photo or drag & drop, Must support enrollment through an email link, Must support Bulk enrollment through 4 Nos 228,500.00 914,000.00

CSV import, Must have integration with DB/ERP/HRMS for photo importing, Live Face DetectionLMust support anti-spoofing mechanism against, Selfie,

Photo, 3D Mask or 3D Face Replica Model based fake-face attacks, Max. User : 100,000 1:N Matching Face: 50,000, 1:1 capacity, Face: 100,000, Text

logs 50,00,000 or higher Max. Image Logs 50,000 or higher, WiFi (on-board) Must be on-board - Support, RS-485 1ch Host / Slave (Selectable), OSDP

Must support OSDP ver. 2.0 or higher, Wiegand 1ch Input, 1ch Output, Aux Inputs 3ch Inputs, Relay 1 Relay, POE+ Supported, Intercom Supported, RTSP

Supported (To connect with third party VMS), USB USB 2.0 (Host), USB expansion port Must support for future expansion, Tamper Detection Supported,

Power: DC 12 V DC 24 V (current: 1.2 A), Data transfer : Seamless integration with 2-way data transfer, capability Enrollment Seamless integration with

direct enrollment from Master software, Certifications and Compliances: UL/ETL UL294 / ETL Listed Components not used from countries, which sharing

land border with India NDAA compliance is must, Certificates BIS, CE, FCC, IC, RoHS, REACH, WEEE, UKCA, RCM, Land border Sharing Must not share

land-border with India, etc. as per specifications of this tender etc complete as required and directions of Engineer-in-Charge.

38 Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of Smart card Mifare smart Card , distance upto 2.5" Memory Type EEPROM, 1K bit memory Complies with

5 ISO/IEC standards for thickness. Lifetime Warranty .etc. as per specifications of this tender etc complete as required and directions of Engineer-in- Charge. 100 Nos 650.00 65,000.00

Supply, Installation, Testing & Commissioning of Stainless Steel SS 304 Grade, Push Button, Heavy Duty Material , NO, NC Based, 4 Amp @125 VAC.

Supply, Installation, Testing & Commissioning of Emergency Glass Break Operating Voltage : 12/24 VDC ,Contact Resistance: 100 mΩ ,Contact Rating: 5

7 Amp 125/250 VAC ,Key: Resettable key included , Window Status: Locked/Unlocked ,Design: Modern Sleek Design ,Single/Double Pole Options available 4 No. 2,500.00 10,000.00

,Resettable flexi element , Response: Fast and higher detection range etc. all complete as per specs.

Supply, Installation, Testing & Commissioning of Electro Magnetic Lock Single Leaf as per door design, Fail safe type, Holding force: 272kg(600lbs), Inbuilt

Door contact , Current Drain:320mA/12VDC, Built-in voltage spiker suppressor to protect the lock body and equipments, lock body and armature with

chemical plating anticorrosion finished, With LED light & Compatiable brackets (L/U/ZL),Bracket shall included as per door's design only, UL Listed etc.as

per specifications of this tender etc complete as required and directions of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of Electro Magnetic Lock Double Leaf as per door design, Fail safe type, Holding force: 272kg(600lbs),

Inbuilt Door contact , Current Drain:320mA/12VDC, Built-in voltage spiker suppressor to protect the lock body and equipments, lock body and armature with

chemical plating anticorrosion finished, With LED light & Compatiable brackets (L/U/ZL), Bracket shall included as per door's design only, UL Listed etc. as

per specifications of this tender etc complete as required and directions of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of 4 core .75 Sqmm shielded RS485 OSDP communication multi-stand Data Cable (Quantity in running

Meter) etc. all complete as per tender specs.

Supply, Installation, Testing & Commissioning of Cat 6 Data Cable (Quantity in running Meter) etc. as per specifications of this tender etc complete as

required and directions of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of 16 Port POE Switch Managed Giga with ith all the accessories. as per specifications of this tender etc

complete as required and directions of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of Server i7-7700T 2.9GHz Processor. Turbo max to 3.8GHz • Support Intel vPro, AMT 11 remote

13 management • Support TPM 2.0 Function • up to 4 x 2.5" SATAIII Storages,as per specifications of this tender etc complete as required and directions of 1 Nos 432,670.00 432,670.00

Engineer-in- Charge.

39 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: AV SYSTEM

S NO DSR/MR ITEM DESCRIPTION QTY UNIT RATE DSR AMOUNT NDSR AMOUNT

SITC of 6" Compact Full Range Ceiling Speaker (Type-01)

Driver Size : 1 x 6.5” LF Driver

RMS Power : 50 W

Nominal impedance: 8 Ohm

Transformer Taps : 100V / 70V upto 30W

Frequency Range : 75 Hz-20 kHz

Maximum SPL : Peak - 113dB

Dispersion: 110 Degree Conical

Sensitivity: 90dB

Certification: EN54-24, UL 1480, UL 2043

Aluminum, powder coated grill

Complete with Accessories

SITC of Dual Channel 480Watts Power amplifier

Nos. of Channel : 2

Power output : 2 × 240 W @ 4 ohms, 8 ohms, 70 /100 V

Distortion, 1/8 rated power <0.05%

2 MR THD 20Hz-20kHz at 1 W <0.5% or better 1 NOS 194,350.00 194,350.00

Signal To Noise Ratio: >97 dBA

Channel separation (Crosstalk) >85 dBA

High-pass filter 80 Hz HPF

Frequency Response : 20 Hz to 20 kHz

Energy Star Rated

SITC of DSP Processor

AEC Mic / Line Input: min 10 No's

Line Output: min 6 No's

USB Audio Interface 24Bit, 48Khz

GPIO Contacts: 6 No's

Built in Digital Audio DANTE Network with 64 x 64 Channel

Frequency Response: 20Hz to 20KHz

Ethernet Port: Yes

RS232 connector for interfacing with 3rd party control systems

Crosstalk (inter-channel @ 1 kHZ): < -75 dB

Common mode rejection: Typically, -60 dB at 1 kHz

Latency: <1.8ms

Maximum output level: -31 dBu to +24 dBu

Dynamic range: > 105 dB

Class-compliant USB connection for integration with soft codec conferencing applications

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: AV SYSTEM

S NO DSR/MR ITEM DESCRIPTION QTY UNIT RATE DSR AMOUNT NDSR AMOUNT

SITC of Ceiling tile microphone having 24 microphone capsules with minimum 6 simultaneous beam combination of

Dynamic / Static style.

Powerful onboard DSP: automix, acoustic echo cancelation, noise reduction, automatic gain control, and 4-band EQ

Six individual output channels with up to 32 user-defined microphone pickup zones provide the flexibility to cover a wide

variety of room sizes and meeting types

Output Channel 1 can be configured with up to 16 user-defined Coverage Zones to ensure coverage of nonpriority or

unplanned participants

Output Channels 2–6 can be configured with up to 16 user-defined Priority Zones to ensure priority pickup of participants

in known locations

Beam Width: 90-degrees

Polar Pattern: Beam pattern

Frequency Response : 60 Hz to 18,000 Hz

Maximum Input Sound Level : 102 dBSPL

Dynamic Range : 89 dB

Signal-to-Noise Ratio : 61 dB

Self-Noise :25 dBSPL

UL 2043 compliant for installation in plenum spaces

includes tile bridge, safety wiring, and mounting hardware and accessories

Powered by network PoE

SITC of 98" Professional Ultra HD Display Panel, 4K UHD (3840x2160) Resolution, Brightness 600 Nits, Viewing angle

(horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel technology: IPS / Direct LED, Contrast ratio

5 MR (typical) 1200:1, Connectivity: Video Input: 3 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232, Ethernet, 1 1,098,550.00 1,098,550.00

2x10W Built-in speakers, System version Andriod 11, 4GB RAM/ 32GB ROM, Mali G31 MP2 GPU etc all complete

86" 4k, UHD Professional Signedge Display with 500 NITS, 24*7 ,Built in SOC/ Media Playerwith Quad Core Processor,

Built in Open Platform Android 11, 3X HDMI, Audio Input Audio Output, Built in Speaker(12W x 2) ;Including mounting

6 MR bracket, Built-in Chromecast, Dolby Digtial audio HDMI-CEC device linking supported, 3 USB(2.0), 3*HDMI(2.0 Side), 1 NOS 454,650.00 454,650.00

Headphone Out, 1 *RJ 45, SPDIF out, Built In 2.4 GHZ Wifi,CPU Built in Mali G31 MP2 GPU-A55*4, 1.1 GHz

Processer, 4 GB RAM 32GB Storage,Metal Frame 12 W built speakers

7 MR SITC of Mounting bracket/ accessories for the main display complete wth standard accessories as required. 2 NOS 7,650.00 15,300.00

SITC of 55" 4k, UHD Professional Signedge Display with 500 NITS, 24*7, Built-in SOC/ Media Player with Quad Core

Processor, Built in Open Platform Android 9, Surface Haze 28%,With Built in Bluetooth, 3X HDMI 2.0, Audio Input Audio

Output, Built in Speaker(10W x 2) ;Including mounting bracket, Built-in Chromecast, Dolby Digital audio, The built-in SOC

is powered by Google's Android OpenPlatform, 2 USB(2.0), 3*HDMI(2.0 Side), Headphone Out, 1 *RJ 45, SPDIF out,

Built In 2.4 GHZ Wifi,CPU Built in With Cortex-A55*4, 1.1 GHz Processer, 2 GB RAM & 16 GB Storage, 20 W built

speakers Complete with standard accessories as required

9 MR SITC of Mounting bracket/ accessories for the side fill display complete wth standard accessories as required. 6 NOS 7,550.00 45,300.00

SITC of 65" 4k, UHD Professional Signedge Display with 400 NITS, 24*7 ,Built in SOC/ Media Player with Quad Core

Processor, Built in Open Platform Android 11, With Built in Bluetooth, 2X HDMI, Audio Input Audio Output, Built in

Speaker(10W x 2) ;Including mounting bracket, Built-in Chromecast, HDMI Arc, Dolby Digtial audio, The built-in SOC is

powered by Google's Android Platform, HDMI-CEC device linking supported, 2 USB (2.0), 3*HDMI (2.0 Side),

Headphone Out, 1 *RJ 45, SPDIF out, Built-in 2.4 GHZ Wifi,CPU Built-in With Cortex-A55*4, 1.1 GHz Processer, 2 GB

RAM, 20 W built speakers

11 MR SITC of Mounting bracket/ accessories for the above display complete wth standard accessories as required. 9 NOS 7,550.00 67,950.00

SITC of Ultra Thin Retractable Touch Monitor Lifter With Screen, Material: Full aluminum alloy, Monitor: 15.6 inch FHD

Screen (16:9) , Resolution ratio: 1920*1080 , Screen Brightness: 400 cd/m2 , Contrast: 1500:1 Full Angle Automatic

Pitch Angle: 15 degree Manual Pitch Angle: 0-30 degree Interface: HDMI+RS232 I/O+USB With Anti-Pinching Function

Cable Cubby with flip top, cover and 6 Pass Through Holes for multi-format cables, 2 Universal Power Socket , 1 HDMI,

1 USB-C for Data Transfer, made of aluminium etc all complete etc all complete

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: AV SYSTEM

S NO DSR/MR ITEM DESCRIPTION QTY UNIT RATE DSR AMOUNT NDSR AMOUNT

SITC of Under Table POE based HDMI2.0 Wall Plate Encoder with 2 x 1 Switching with KVM

Signal Inputs : HDMI2.0a and USB-C, USB Host

1 Gbps - Compressed 4K - JPEG 2000

LAN ports: Single LAN

Resolution support: IP streaming up to 4K60 4:4:4 with embedded audio

Copy Protection/Security : HDCP 2.3, 802.1X compatible

Color Depth: 24-bit, 30-bit

14 MR Signal transmission distance: Cat6a: 328 ft (100 m) or better 3 NOS 359,380.00 1,078,140.00

3-pin Phoenix/Euroblock connector for analog audio in/out and gigabit copper

Audio Formats input/ output : Support 7.1 channel audio, 24-bit/ 48kHz

Latency : ≤ ~1 fps latency

Single USB 2.0, IR, and RS-232 (via 3-pin Phoenix/Euroblock)

Ethernet (PoE): 1 Gb for Video/Audio/Control

Complete with IR emitter, receiver, wall mount bracket

Can use POE or AC (optional power supply)

SITC of POE/ POE+ enabled Encoder with Dual LAN and 3 x 1 Switching with KVM

3x1 Switching Encoder (Dual HDMI and USB-C) with Dual LAN

Video : HDMI 2.0a with HDCP pass-through and USB-C.

Connectors : HDMI2.0 and HDMI loop-out, USB Type-C, USB Host port

Support IP streaming via Gbit/copper 1 Gbps - Compressed 4K - JPEG 2000

Built-in 2x 1G/bit RJ45 ports for Audio/Video and Utility control

Should Capable of up to 4K60 4:4:4 with embedded audio

Signal transmission distance: Cat6a: 328 ft (100 m) or better

Shall support videowall up to 15 x 15 or more

HDCP 2.3 Encryption, USB, IR, RS-232 (via phoenix) and POE.

Audio (Analog): Balanced Stereo (Input or Output) and gigabit copper

Audio Formats input/ output : Support 7.1 channel audio, 24-bit/ 48kHz

Latency : ≤ ~1 fps latency

IR : Input/Output ports

Serial : Full Duplex up to 115.2 kbps

Ethernet (PoE) : 1 Gb for Video/Audio/Control, 1Gb for Utility

SITC of POE/ POE+ enabled Encoder with Dual LAN and 3 x 1 Switching with KVM

3x1 Switching Encoder (Dual HDMI and USB-C) with Dual LAN

Video : HDMI 2.0a with HDCP pass-through and USB-C.

Connectors : HDMI2.0 and HDMI loop-out, USB Type-C, USB Host port

Support IP streaming via Gbit/copper 1 Gbps - Compressed 4K - JPEG 2000

Built-in 2x 1G/bit RJ45 ports for Audio/Video and Utility control

Should Capable of up to 4K60 4:4:4 with embedded audio

Signal transmission distance: Cat6a: 328 ft (100 m) or better

Shall support videowall up to 15 x 15 or more

HDCP 2.3 Encryption, USB, IR, RS-232 (via phoenix) and POE.

Audio (Analog): Balanced Stereo (Input or Output) and gigabit copper

Audio Formats input/ output : Support 7.1 channel audio, 24-bit/ 48kHz

Latency : ≤ ~1 fps latency

IR : Input/Output ports

Serial : Full Duplex up to 115.2 kbps

Ethernet (PoE) : 1 Gb for Video/Audio/Control, 1Gb for Utility

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: AV SYSTEM

S NO DSR/MR ITEM DESCRIPTION QTY UNIT RATE DSR AMOUNT NDSR AMOUNT

SITC of Single Channel 4K / UHD Network Decoder

Single-channel AV Decoder for HDMI® up to 4K/UHD, plus embedded audio and RS-232 or IR control pass-through

Supports UHD @ 60 Hz plus HDR formats

Support Upscaling & Downscaling

Network error resilience with FEC (forward error correction)

Ultra-low latency over 1 Gbps (GbE) networks

Lossless Video Compression like SMPTE 2042 VC-2 light video compression or better

17 MR Supports industry-standard, network security features and protocols like HTTPS, Telnet, SSH, WebSockets with TLS, 6 NOS 258,250.00 1,549,500.00

and AES-128 encryption

Supports AES67-compatible networked audio streams to decoders and audio interfaces

EDID Management, HDCP 2.2 Compliant

Supports Processing for video walls with portrait and landscape displays up to 16×16 @ 4K/30 and 2×2 @ 4K/60

Support Audio Embedding and De-Embedding

Support PoE Powering

SITC of 1G/bit HDMI AV over IP Decoder with Dual 1G LAN and USB Hub

Signal Outputs: HDMI2.0a

1 Gbps - Compressed 4K - JPEG 2000

Resolution support: IP streaming up to 4K60 4:4:4 with embedded audio

Copy Protection/Security : HDCP 2.3 or better, 802.1X compatible

Color Depth: 24-bit, 30-bit

Signal transmission distance: Cat6a: 328 ft (100 m) or better

18 MR 5-pin Phoenix/Euroblock connector for balanced analog audio in/out 1 NOS 352,270.00 352,270.00

Shall support videowall up to 15 x 15 or more

Audio Formats input/ output : Support 7.1 channel audio, 24-bit/ 48kHz

Latency : ≤ ~1 fps latency

Dual USB2.0 for peripheral device, IR in & out, and RS-232 (via 3-pin Phoenix/Euroblock)

Ethernet (PoE): 1 Gb for Video/Audio/Control, 1Gb Ultility port

Complete with IR emitter, receiver, wall mount bracket

Can use POE or AC (optional power supply)

SITC of Wireless Presentation Platform, allows simultaneous content sharing for up to two or higher 1080p presenters,

Wireless screen casting with iOS, Android, Mac, Chromebook, and Windows devices through native AirPlay, Google

Cast, or Miracast protocols, Supports YouTube Live streaming, Local storage available for playback of images and video,

WPA2-PSK, and AES-128 encryption etc all complete

SITC of 4K PTZ camera with 4K Ultra HD output at 60fps.

4K Ultra HD output at 60fps.

Zoom Capacity: Up to 25x - 30x zoom in 4K.

Resolution: Up to 4K60 with Main stream max framerate 60fps.

Signal output: HDMI2.0 (up to 4K@60Hz), 3G-SDI, USB (2160p30 max.)

Sensor: Sony 1/1.8”, 8.42MP, 16:9 High SNR CMOS Sensor.

Shutter: Auto/ Manual. Scanning mode: Progressive/ Interlace.

Signal Noise Ratio >50 dB or better

Horizontal FOV: 59.1° - 2.5° or better, Vertical FOV: 34.5° - 1.4 ° or better,

20 MR Horizontal rotation: +/- 170°, Vertical rotation: 120° (30° down, 90° up). 1 NOS 639,765.00 639,765.00

Pan / Tilt speed range: 0.15° ~ 120° p/sec or better

Image Flip (H & V): Supported

Number of presets: 255 or better with high accuracy

Control: UVC, IR Remote, IP, Serial.

Network interface: RJ45, 1 G/bit

Serial interface: RS232 mini DIN-8, RS485 2-pin phoenix.

Should supplied with power adapter, remote control, RS232 cable, RS485 2-way Phoenix connector, Balanced Audio,

Line-In 5-way Phoenix connector.

Tracking feature (Optional)

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: AV SYSTEM

S NO DSR/MR ITEM DESCRIPTION QTY UNIT RATE DSR AMOUNT NDSR AMOUNT

SITC of OEM maufactured Wall / Ceiling mount bracket for the PTZ Camera complete wth standard accessories as

SITC of HDMI to USB 3.1 Gen 1 or better Video Capture Tool with Loop-Out.

Conversion of HDMI 2.0b 18Gbps signals to 5Gbps.

USB 3.1 Gen1 data.

22 MR HDMI 4K 60Hz input with 1080p 60Hz downscaling support. 1 NOS 44,640.00 44,640.00

Uncompressed YUV2 when using USB 3.2, MJPEG compression for USB 2.0.

Compatible with VLC, OBS, XSPLIT, AMCAP and other video capturing software.

Ideal for video conferencing, online streaming and other HDMI video capture scenarios.

SITC of NUC PC with pre-installed video conferencing software -

23 MR Min. i7 Intel 9th GEN or higher processor, 8/16 GB RAM, 256GB or higher SSD Storage, complete with 14" or better 1 NOS 154,650.00 154,650.00

monitor, Keyboard & Mouse.

SITC of 4K 18Gbps Multiformat Presentation Switcher with KVM.

Resolution support : up to 4K60 4:4:4, 4K60 4:2:0

Input connector: 1 or better USB-C, 1 or better HDMI, 2 or better USB-Hub, 1 or better USB-Host

Output connector: 1 or better HDMI, 1 or better Analog Bal. (Euro-block connector)

Input Resolution: (HDMI) - Up to 4K / UltraHD / 2160p @60Hz, 4:4:4.

(USB-C) - Up to 4K / UltraHD / 2160p @30Hz, 4:4:4.

HDMI Output Resolution: Up to 4K / UltraHD / 2160p @60Hz, 4:4:4.

Switching of 1 HDMI / USB-C signal to 1 HDMI output.

Supports 18Gbps for resolutions up to 4K UltraHD 60Hz.

USB-C supporting data and AV transmission as well as 40W charging.

Balanced audio de-embedding, EDID management.

Auto switching and control functions, screwable power supply.

SITC of All-in-one Videobar Wide angle 4K video camera

Camera Sensor: 8 MP or better

Camera Resolution: 4K 30Hz, 1080p 60Hz

Digital Zoom: 5x digital zoom

Field of View (FOV): 120° or better

Microphone: 4x MEMS digital microphone arrays with a range of Up to 8 meters and an angle of 180°

Speaker: 8 W stereo full range speakers,

Video output resolution: 3840x2160p 30Hz 4:4:4 8bit, 1920x1080p 60Hz

HDR support: Yes

HDMI2.0 & HDCP2.2 compliant

Feature: AEC (acoustic echo cancellation), AGC (automatic gain control), ANS (automatic noise suppression) and full

Shall have Wired screen presentation via USB-C (with PD) and HDMI

Shall support Wireless BYOD / BYOM enabled for Windows, Airplay, Miracast and with included streaming dongle, Wired

screen presentation via USB-C (with PD) and HDMI.

Complete with standard accessories as required.

SITC of Network based Control Processor AV Control

Network based Control Processor with required number of physical ports like RS-232, IR and Relay

With interface device license each for i-Pad and Android touch interface licence.

2 x LAN/Ethernet Port

Shall be accessable from a web browser for setup and management

26 MR Supports industry-standard, secure data communications through HTTP/2, HTTPS, SSH, SFTP, and WebSockets with 1 NOS 292,855.00 292,855.00

TLS and AES-128 encryption

iPhone, iPad, and Android control app support

Flexible scalability for integrating one or several AV systems over a network

Continuous system monitoring – quickly assess system and device status

Centralized, network-based configuration and management of IP-controllable products and systems

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: AV SYSTEM

S NO DSR/MR ITEM DESCRIPTION QTY UNIT RATE DSR AMOUNT NDSR AMOUNT

SITC of IP to RS-232 Command Converter for Control System

Conversion between IP and RS-232 control commands

Remotely powered via PoE.

Also can be powered through USB from a nearby USB power source.

Easy to set up and configure from the network control system

5 foot (1.5 meter) RS-232 adapter cable

SITC of IP to IR Command Converter for Control System

Conversion between IP and IR Command

Three emitter cable included

28 MR Easy to set up and configure from the network control system 1 NOS 32,990.00 32,990.00

Each emitter is independently addressable for discrete IR control of three different AV devices

Includes built-in IR learning and access to extensive IR device code database

Remotely powered via PoE (Power over Ethernet)

SITC of 10" Touch Panel

Capacitive touch screen with 1280×800 resolution

Surround bezel LED Lighting

Remotely powered via PoE (Power over Ethernet) – single-cable network connection for data and power

Supports multi-touch and gesture interactions

Dual purpose glass and wall mount included

30 MR SITC of 10.2" iPad wireless touch panel for AV Control complete with standard accessories 1 NOS 99,750.00 99,750.00

31 MR SITC of Wireless Charging and Docking station for above Wireless touch panel complete with standard accessories 1 NOS 84,650.00 84,650.00

SITC of 48-Port PoE+ 1G/bit Managed Network Switch for AVoIP, 2 or more SFP+ ports,

Advanced IPv4/IPv6 security, Multi-resiliency, shall have Layer 3 feature including IGMP snooping, PIM routing, L3

32 MR routing (static, RIP, OSPF, VRRP, PIM-SSM, PBR), Shall have Voice VLAN with SIP, H323 and SCCP protocols, DHCP 1 NOS 295,670.00 295,670.00

snooping, QoS and VLAN configuration, 802.1x port authentication

Complete with Standard accessories

SITC of 08-Port PoE/ PoE+ 1G/bit Smart Network Switch, 2 or more SFP ports,

33 MR Including IGMP snooping, Shall have DHCP snooping, QoS and VLAN configuration, 802.1x port authentication 1 NOS 139,550.00 139,550.00

Complete with Standard accessories

SITC of Wireless Access Point 802.11 a,b, g, n, at with POE/POE+, support Dual band 2.4GHz and 5GHz complete with

standard accessories

SITC of 18U AV Equipment Floor Rack with power distribution unit, Mounting hardware, Shelf trays, Fan unit for

ventilation for AV equipment, movement wheels with brake facility complete with front access door.

SITC of 1 Mtrs HDMI Cable HDMI-A male to HDMI-A male , HDMI version 2.0 – 18Gbps for resolutions up to 4K UltraHD

36 MR 60Hz or better, shall have High purity, tinned OFC copper conductors and triple shielding, AWG28 or better, should have 30 NOS 2,880.00 86,400.00

Gold plated precision contacts with Secure-Lock-System.

SITC of 2 Mtrs HDMI Cable HDMI-A male to HDMI-A male , HDMI version 2.0 – 18Gbps for resolutions up to 4K UltraHD

37 MR 60Hz or better, shall have High purity, tinned OFC copper conductors and triple shielding, AWG28 or better, should have 16 NOS 3,220.00 51,520.00

Gold plated precision contacts with Secure-Lock-System.

SITC of 3 Mtrs HDMI Cable HDMI-A male to HDMI-A male , HDMI version 2.0 – 18Gbps for resolutions up to 4K UltraHD

38 MR 60Hz or better, shall have High purity, tinned OFC copper conductors and triple shielding, AWG28 or better, should have 1 NOS 4,440.00 4,440.00

Gold plated precision contacts with Secure-Lock-System.

SITC of 7.5 Mtrs HDMI Cable HDMI-A male to HDMI-A male , HDMI version 1.4 – 10.2Gbps for resolutions up to 4K

39 MR UltraHD 30Hz/60Hz or better, shall have High purity, tinned OFC copper conductors and triple shielding, AWG28 or 10 NOS 15,090.00 150,900.00

better , should have Gold plated precision contacts with Secure-Lock-System.

SITC of 12 Mtrs. Premium 4K High speed HDMI active fiber cable,

40 MR Shall have HDMI2.0 - 18Gbps for resolution up to 4K/UHD 60Hz, 1 NOS 33,185.00 33,185.00

Shall be Hybrid Cable with low EMI resistance, low attenuation

SITC of 2 Mtrs. USB-C to USB-C cable, USB 3.2(Gen 2x2) – 20Gbps data transmission ,

Shall have Gold plated precision contacts ,

41 MR USB-C male to USB-C male , 4 NOS 7,730.00 30,920.00

High purity copper conductors and triple shielding ,

Shall have USB Power Delivery 100W, DP Alt-Mode up to 8K 30Hz

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: AV SYSTEM

S NO DSR/MR ITEM DESCRIPTION QTY UNIT RATE DSR AMOUNT NDSR AMOUNT

SITC of 2 Mtrs premium USB-A to USB-A Moulded cable, USB3.2 or better version,

Shall have Data transmission rate up to - 5Gbps or betterm,

Shall have High purity copper conductors and triple shielding

complete with standard accessories

SITC of 7.5 Mtrs Premium fiber optic active USB-A to USB-A cable, Shall have USB3.2 (Gen 2) or better,

43 MR Shall have 10 Gbps or better data transfer, Shall have Hybrid cable, USB2.0 backward compatible with EMI protection, 2 NOS 44,900.00 89,800.00

low attenuation

SITC of 2 Mtrs. USB 3.2 Gen1 USB-A / USB-B Cable, USB 3.2 (Gen1x1) – 5Gbps data transmission, Ultra flexible and

44 MR compact cable, High purity copper conductors complete with standard accesories 10 NOS 2,180.00 21,800.00

SITC 5 Mtrs. Premium active USB-A to USB-B cable, Shall have USB 2.0– 480Mbps data transmission, Shall have High

45 MR purity copper conductors and dual shielding, AWG26 complete with standard accessories 1 NOS 5,260.00 5,260.00

SITC 10 Mtrs. Premium active USB-A to USB-B cable, Shall have USB 3.2 (Gen 1x1) – 5Gbps data transmission, Shall

have High purity copper conductors and dual shielding, AWG28 complete with standard accessories

SITC of 2 Mtrs. USB 3.2 Gen1 USB-C / USB-A Cable, USB 3.2 (Gen1x1) – 5Gbps data transmission, Ultra flexible and

compact cable, High purity copper conductors complete with standard accessories

48 MR SITC of 2 core 16AWG high grade PVC insulated Speaker cable 300 Metre 250.00 75,000.00

49 MR SITC of 2 core sheilded 20/22 AWG Microphone Cable 80 Metre 290.00 23,200.00

50 MR SITC of 4-Pair Shielded/ Twisted Pair S/FTP CATx cable 400 Metre 175.00 70,000.00

51 MR Various Connectors & Accessories 15 Lot 17,500.00 262,500.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

S NO DSR/MR DESCRIPTION UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

SITC of UL268 10th edition compliance and FM approved Intelligent Addressable multi-

criteria detector (optical and thermal sensors) complete with standard base, facility to mount in

different comprehensive environment, Tri-color detector-status LED with 360 ° view,

microprocessor circuitry with error check; detector self-diagnostics and

supervision programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed: 135°F

(57°C) , Field programmable as rate-of-rise or fixed temperature, Polarity insensitive,

1 MR Superior EMI and RFI immunity, RoHS compliant. Detector shall have in-built isolator for Nos 119 3,724.00 443,156.00

better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-

built Isolator feature in detector shall consider Isolator base in place of standard base

OR separate Isolator before and after every detector to comply the same without

any extra cost. It shall be includesurface/recessed MS Box complete with all connections

etc as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

Box having two LED, metallic cover complete with all connections etc as required.

SITC of UL Listed and FM approved Intelligent Addressable Rate of Rise and

Fixed temperature detector complete with standard base, Seven (7) field-selectable

settings in a temperature range of 135°F – 174°F (57.2°C – 78.9°C) , a low-

temperature warning of 40°F (4.4°C), facility to mount in different comprehensive

environment, Tri-color detector-status LED with 360 ° view, microprocessor circuitry with

error check; detector self-diagnostics and supervision programs, Field programmable

3 MR as rate-of-rise or fixed temperature, Polarity insensitive, Superior EMI and RFI Nos 2 3,059.00 6,118.00

immunity, RoHS compliant. Detector shall have in-built isolator for better reliability, circuit

integrity and advanced fault finding. Manufacturers not having in-built Isolator feature in

detector shall consider Isolator base in place of standard base OR separate Isolator

before and after every detector to comply the same without any extra cost.

SITC of UL Listed Sounder cum Strobe rated at 75 dBA @ 3m for Audible annunciation

and 75cd flashintg at 1 Hz for visual indication.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7),

Control Module with built in dual isolator, polarity insensitive, Tri color LED for status

(Green for Normal,Yellow for Faulty and RED for activation), Operating Temp and RH:

5 MR 0-49 deg C and <=95%. Module shall have in-built isolator for better reliability, circuit Nos 4 5,985.00 23,940.00

integrity and advanced fault finding. Manufacturers not having in-built Isolator feature

shall provide separate Isolator before and after every Module to comply the same without any

extra cost. (For

Supplying, AHU & Staircase

installation, testingPressurization Fans, Hooters/

& commissioning of Sounders/ Strobes

addressable etc.) control

module complete as required.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7),

Monitor Module with built in dual isolator, polarity insensitive, Tri color LED for status

(Green for Normal,Yellow for Faulty and RED for activation), Operating Temp and RH:

0-49degC and <=95%. Module shall have in-built isolator for better reliability, circuit

7 MR integrity and advanced fault finding. Manufacturers not having in-built Isolator feature Nos 4 4,522.00 18,088.00

shall provide separate Isolator before and after every Module to comply the same without any

extra cost. (For Flow Switch Monitoring/ Gass suppresion Integration etc.)

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

S NO DSR/MR DESCRIPTION UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

SITC of UL268 10th edition compliance and FM approved Intelligent Addressable Duct

detector with 10ft sampling pipe (optical and thermal sensors) complete with standard

base, facility to mount in different comprehensive environment, Tri-color detector-status LED

with 360 ° view, microprocessor circuitry with error check; detector self-diagnostics

and supervision programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed: 135°F

8 MR (57°C) , Field programmable as rate-of-rise or fixed temperature, Polarity insensitive, Superior Nos 4 19,551.00 78,204.00

EMI and RFI immunity, RoHS compliant. Detector shall have in-built isolator for better

reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built

Isolator feature in detector shall consider Isolator base in place of standard base OR

separate Isolator before and after every detector to comply the same without any extra cost.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7),

Manual Pull Station Single Action, Shock and Vibration Resistant, with built in dual

isolator, polarity insensitive, Tri color LED for status (Green for Normal,Yellow for

Faulty and RED for activation), T-45 Key Reset lockset for easy maintenance, Operating

9 MR Temp and RH: 0-49degC and <=95%. MCP shall have in-built isolator for better reliability, Nos 4 6,384.00 25,536.00

circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator

feature shall provide separate Isolator before and after every MCP to comply the same

without any extra cost.

Supplying, installation, testing & commissioning of One controller supports 12 zones,

10 MR expandable up-to 492 zones with 24-zone routers, Control and routing of 4 simultaneous audio Nos 1 379,832.00 379,832.00

channels,EN 54-16 system certification

SITC of Call station with soft touch button 15 freely programmable buttons,Customization via

11 MR built-in display and keys, Provision for installing emergency button and key switch,EN 54-16 Nos 1 178,560.00 178,560.00

system certification etc all required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of Power amplifier, 480W,Multiple outputs -

70 V / 100 V and 8/4 ohm, Temperature controlled forced front to back ventilation, directly

stackable, Mains, battery back-up, and pilot tone supervision, Dual inputs with priority switching

complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm FS armoured cable, 600/1000V rated with

14 MR annealed copper conductor having XLPE insulation, steel wire armouring & FS outer Mtr 1190 254.00 302,260.00

sheath complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in

the existing surface / recessed steel conduit of following pairs, cores and size

including connections and interconnections etc. as required.

Supplying and Laying of 2x1.5sqmm FS unarmourd cable

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and

accessories like coupler etc. as required.

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power

Battery backup complete as required.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

S NO DSR/MR DESCRIPTION UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

SITC of Remote Paging Microphone should be fully digital connected via CAT6 Cable

with Controller. The Microphone should have capability to make announcement in 96

Zones and have all call facility. The Microphone shall have ability to control music and should

be able to route the music in zones. Microphone should have maximum zones capacity up to

18 MR 120 Zones. The Microphone should have LED indication for the different faults, the unit Nos 1 160,930.00 160,930.00

shall be able to indicate AC, DC, Fault, Mic and Test status through LED.. The Unit shall

have 2 RJ45 ports for Microphone so that the other microphone shall be able to link with

the unit. The Microphone shall have ability to Communication limit up to 600 Meters

Supply, Installation, Testing and Commisioning of Interface Card for BMS fire integration

compatible with exisiting system

Supply, Installation, Testing and Commisioning of repeater panel having 160 character

display with backlit control compatible with existing system

SITC of UL864 10th Edition UL Listed and FM approved Analog Addressable 4 Loop

Fire Alarm control panel. Panel shall be running on full digital protocol with 32 bit

Microprocessor . The Panel shall be complete with 6" color touch screen LCD Display. Fire

alarm panel should have minimum capacity of 2500 detectors and devices in any

combination and capable of making upto 50 loops in single panel using additional Loop

cards. Each addressable loop shall be capable of taking 250 addresses per loop

configuring either as all detectors or modules or any mix of both. The panel shall have

the Fire Fighter Touch Screen Graphical Display panel to inform & guide Fire Fighters

for carrying out Fire Fighting operations. The display shall have Hazmat icons

indicating the presence of any explosive gas, liquids, poison,fumes etc. If this feature

21 MR is not available in fire alarm panel then additional fire fighter touch panel along with Nos 1 444,220.00 444,220.00

necessary hardware and software should be provided by the manufacturers for fire

fighters to guide them during emergency without any extra cost. To expedite system

troubleshooting, the system cards shall have ground fault detection and diagnostic LEDs

by card. In the display,simple building floor plan can be loaded in bitmap or jpeg format, On

the map, the user will see an icon indicating the location of the event in the building in

addition to a 'You-Are-Here' symbol to tell the responding person exactly where they are in the

building in relation to the event. The system shall be polarity insensitive. The panel shall

support degrade mode operation and shall have battery backup of 24 hrs in normal

condition and 30 minutes in Alarm condition.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts

18.7 bolts, gaskets etc. and fixing the pipe on the wall/ceiling with

1 suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree centigrade

with required accessories :

18.21.1 Pendant type 281 Each 522.00 146682.00

Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15

NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line

3 18.25 (Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 6 NOS 12070.00 72420.00

Mechanical Foam gas cartridge type. 9 Kg capacity

Digitally signed by AMIT

ABC dry powder stored pressure type 6 kg capacity

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: GAS SUPPRESSION SYSTEM

S No Description Unit Qty Rate DSR Amount NDSR Amount

Supply, Installation, Testing and Commissioning of 80 ltrs Seamless

Cylinder with Valve with all accessories( Pressure Guage +Low

pressure supervisory switch,Low Pressure Connection Tee Cable,

Pneumatic actuator, Manual Actuator, Flexible Discharge Hose,

Tee, Check Valve, Flexible Actuation Hose, Pressure Switch for gas

release input, Low Pressure Connection Unit, Connection kit for End

of Line, Elbow), Sinorix FK5112 gas, Electromagnetic Actuator,

A Discharge Nozzles Drilled for 360 degree covereage, M.S.

Seamless pipes as per ASTM A 106 Gr. B, schedule 40 with

necessary fittings, Manifold for Cylinders , Cylinder MOUNTING

WLL CLAMP, DNE (Don’t Enter Gas released) Sign board, GRE

(Gas release Exit) Sign board, Gas Release Panel, Gas Abbort

Switch, Gas Relase Switch, Sounder cum Strobe

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: LANDSCAPE

S NO DSR/MR Description Unit Qty Rate DSR Amount Non DSR Amount

Supply of full soil fill conical shaped planters of specified volume and dimensions in stone finish

or equivalent. planters to be indigenously made by rotational moulding, with homogeneous

recyclable, industrial grade polymer-resin mix, and textured surface. planters should have an

integrated water outlet hole & plug, single layered peel-proof construction, light weight, rust

proof, uv stabilized, anti-frost feature without any joints, and easy to clean. planter supplier

MR must give 1 year warranty against any fading or cracking for both indoor and outdoor use.

green plant and laying is extra. potting instructions as per company catalogue.

Supply of double layered translucent backlit cylinderical shaped - hand carfted pattern planters

of volume 40 ltr; approx. dimension 40(h)x18.5(d) in granite/ stone/ solid finish or equivalent.

planters to be indigenously made by rotational moulding, with homogeneous 100% recyclable,

industrial grade polymer-resin mix, with textured surface and stone match finishes. planters to

2 MR have concealed shock resistant back lighting system with secured supply wire and an Nos 5 20,000.00 100,000.00

integrated water outlet hole & plug, peel proof construction, asbestos free, light in weight,

without any joints, rust proof, uv stabilized, anti-frost feature and easy to clean. planter supplier

must give 1 year warranty against any led, fading or cracking for indoor and outdoor use.

3 MR Plantation: Supply and installation of Natural Plant with sand, fertilizer etc. Nos 50 1,800.00 90,000.00

Providing & fixing Artificial silk plants with combination 3 or 4 types uniformly distributed plants

as ceiling suspended creepers with necessary wire or hanging arrangement included. Plants

which ultraviolet blocking chemicals are impregnated into the materials during the

4 MR manufacturing process. These chemicals are blended with the plastic or PVC parts Installation Sqm 175 6,000.00 1,050,000.00

. Suspended creepers shall be installed in laminated finish trays duly suspended from the

ceiling with twisted rods of size and design as per the detailed drawings complete.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-SIGNAGE

S No DSR/ MR Description Quantity Unit Rate DSR Amount NDSR Amount

Providing and fixing of signage made out of acrylic sheets of

6mm thickness. Height of each letter will be 450mm and in

1 MR width proportionally. Letters to be fixed on the partition using 1 Nos 189496.00 189,496.00

industrial grade adhesive. Depth of each letter to be 75mm

Providing and fixing of signage made out of acrylic sheets of

6mm thickness. Height of each letter will be 250mm and in

2 MR width proportionally. Letters to be fixed on the partition using 1 Nos 126331.00 126,331.00

industrial grade adhesive. Depth of each letter to be 36mm

Providing and fixing of signage for bathroom doors, server

3 MR room etc made out of laser cut SS sheet of 2mm thickness and 55 Nos. 15000.00 825,000.00

size 300mmx150mm powder coated to black

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

Supplying and Placing in Position of Desk with Leatherette Desk Pad size : (W) 3200mm X (D) 2280mm X (H) 760mm. With sculptural forms and

purposeful design, the Remus Collection is crafted for those who value style and substance. The L-shaped director’s desk features a stunning

herringbone veneer tabletop, enhanced by a lacquered grey wooden frame. Equipped with track connect wire management, a leatherette desk pad, and

generous storage, it delivers a seamless blend of aesthetics and practicality. Tabletop and desk front features exotic veneer wrapped on premium

engineered wood. Herringbone veneer pattern, handcrafted by skilled Marquetry artisans. A Dark Oak finish accentuates the unique grains & pattern of

the veneer. A lacquered finish in Pewter grey adds a subtle contrast to the design. A contrast of lacquered polish and patterned veneer add a statement

1 VIP ROOM MTABLE appeal. Spacious L-shaped tabletop offers ample workspace, ideal for multitasking and large projects. Track connect cable management keeps the 1 303000 303000

workspace clutter-free. A leatherette desk pad offers a smooth and durable surface for writing and daily tasks. 1 password-protected drawer, 2 shelves,

and 3 cabinets keeps your essentials protected and within reach. Premium PU polish with low chemical emissions ensures healthy indoor air. The

product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO

Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, SEDEX Certification, GRIHA Certification. The product should be as per above

given specification under the guidance of project architect & Engineer in charge. Dimension: (W) 3200mm X (D) 2280mm X (H) 760mm

High back Chair having back height of 770 mm and width of 380 mm from top & 500 from mid (lumbar) level. Seat Depth shall be 480 mm and seat

width shall be 540 mm at front & 450 mm at back. Armrest to Armrest distance of 680 mm. Seat height shall range between 410 mm to 470 mm. Armest

shall be finished with foam & leather on the user side & top with water fall edge to provide comfort to user & outside of armrests as well as below back

shall be finished with wooden texture. Below portion of armrest opening towards seat shall be finished with crome surface. Knee tilt mechanism shall be

HIGH BACK LEATHER provided having tilt tension adjustment & height adjustment at same level on right hand side of user & any position locking level at the left hand side of

2 user. Padded lumber support to be provided of height min. 200 mm. Back of the chair shall be finished with leather upto height of 600 mm & wooden 1 84707 84707

texture finish upto 200 mm & leather below the wooden texture. Aluminium die cast pedestal having length of prongs 310 mm with 50 mm height

towards centre & 25 mm height outside. High Quality leather in beige or black to be suppiled. Twin wheel castors to be provided.

Mid back Chair having back height of 610 mm and width of 380 mm from top & 500 from mid (lumbar) level. Seat Depth shall be 480 mm and seat

width shall be 540 mm at front & 450 mm at back. Armrest to Armrest distance of 680 mm. Seat height shall range between 410 mm to 470 mm. Armest

shall be finished with foam & leather on the user side & top with water fall edge to provide comfort to user & outside of armrests as well as below back

shall be finished with wooden texture. Below portion of armrest opening towards seat shall be finished with crome surface. Knee tilt mechanism shall be

provided having tilt tension adjustment & height adjustment at same level on right hand side of user & any position locking level at the left hand side of

MEDIUM BACK user. Padded lumber support to be provided of height min. 200 mm. Back of the chair shall be finished with leather upto height of 440 mm & wooden

LEATHER FINISH texture finish upto 200 mm & leather below the wooden texture. Aluminium die cast pedestal having length of prongs 310 mm with 50 mm height

towards centre & 25 mm height outside. High Quality leather in beige or black to be suppiled. Twin wheel castors to be provided.

Meeting table in size of 3000 x 1200 x 750 (WDH)mm.

The worksurface of the table shall be made up of 25mm thick Pre-laminate particle board as per E1 norms and its edges duly sealed with 2mm PVC

Lipping on automatic machine at visible sides. Two Long sides of the work surface shall be provided with reverse tapered edge design created by

chamfering the board at 45 degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on automatic

machine. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on

4 MEETING TABLE 1 66641 66641

top, 45mm at bottom and of 725mm length to get 750mm table height, it shall acts as vertical structural support member, connected by a horizontal cross

beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast 90deg – 02 way

connectors. Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry

cover made up of steel sheets.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

Supplying and placing in position of sofa as per Image. Its stylish contemporary design boasts a kiln-dried solid wood frame and rich leather. The

magnificent frame slopes from the back to the seat giving a stately feeling to your seat. High-density foam is upholstered in highly durable leather

providing an exquisitely divine place to unwind. Durian's leather is procured from the finest Italian tanneries and is stain and fade resistant. Set on sleek

stilt legs, the sofa frame has a unique panel detail that runs onto the cushions as well.Warp and scratch resistant solid wood frame with Easy to maintain

leather upholstery. Fade and stain resistant leather upholstery.Unique panel detail on the side with sleek stilt legs. Seating Height: 450mm, Legs

5 1 SEATER SOFA Stainless Steel.The seat cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. 2 87400 174800

The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm.

The polyster polyfill keeps the upholstery wrinke free & soft.The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, SEDEX

Certification, GRIHA Certification. The product should be as per above given specification under the guidance of project architect & Engineer in

charge. 1 Seater Dimension (L)840mm X (D)880mm X (H)760mm)

Supplying and placing in position of sofa as per Image. The recliner sofa wrapped in supple leather, this generously cushioned recliner embraces you in

sheer comfort. Luxurious genuine hide sourced from the finest tanneries. Buttery soft genuine leather grows with you, adding character to the piece. Easy-

to-use manual recline pull tab, designed for all generations. Plush panelled backrest & padded arms offer lounging comfort. Anti-sag construction offers

the right level of support for maximum comfort. Comfortable seat depth & height, designed for modern Indian lifestyle.Material & Subtype:Leather -

ANTE ROOM Semi Aniline Leather, Frame Material:Solid Wood, Plywood Upholstery Materia:Leather, Filling Material:Zig-Zag Spring, Roll Fiber, Rounding Spring,

RECLINER Loose Fiber.The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification,

GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, SEDEX Certification, GRIHA Certification. The product should be

as per above given specification under the guidance of project architect & Engineer in charge. Dimension(W)760mm X (D)900mm X (H)1010mm

Center table in size of 900 Dia x 450 H (mm)

Table top shall be 18mm thick Prelaminated particle board E1 norms and the Understructure shall be made up of 19x19mm square MS pipe having

thickness of 1.6 mm. Frame shall be welded by CO2 welding process for uniform conforming to IS 816. Understructure frame shall be powder coated in

7 CENTER TABLE black shade. 2 21253 42506

Center table in size of 600 Dia x 450 H (mm)

Table top shall be 18mm thick Prelaminated particle board E1 norms and the Understructure shall be made up of 19x19mm square MS pipe having

thickness of 1.6 mm. Frame shall be welded by CO2 welding process for uniform conforming to IS 816. Understructure frame shall be powder coated in

CENTER TABLE FOR black shade.

Supplying and placing in position of sofa as per Image. Its stylish contemporary design boasts a kiln-dried solid wood frame and rich leather. The

magnificent frame slopes from the back to the seat giving a stately feeling to your seat. High-density foam is upholstered in highly durable leather

providing an exquisitely divine place to unwind. Durian's leather is procured from the finest Italian tanneries and is stain and fade resistant. Set on sleek

stilt legs, the sofa frame has a unique panel detail that runs onto the cushions as well.Warp and scratch resistant solid wood frame with Easy to maintain

leather upholstery. Fade and stain resistant leather upholstery.Unique panel detail on the side with sleek stilt legs. Seating Height: 450mm, Legs

9 2 SEATER SOFA Stainless Steel.The seat cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. 1 122600 122600

The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm.

The polyster polyfill keeps the upholstery wrinke free & soft. The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, SEDEX

Certification, GRIHA Certification. The product should be as per above given specification under the guidance of project architect & Engineer in

charge. 2 Seater Dimesnion: (L) 1960mm X (D)880mm X (H)760mm

VIP LOUNGE AREA

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

Supplying and placing in position of sofa as per Image. Its stylish contemporary design boasts a kiln-dried solid wood frame and rich leather. The

magnificent frame slopes from the back to the seat giving a stately feeling to your seat. High-density foam is upholstered in highly durable leather

providing an exquisitely divine place to unwind. Durian's leather is procured from the finest Italian tanneries and is stain and fade resistant. Set on sleek

stilt legs, the sofa frame has a unique panel detail that runs onto the cushions as well.Warp and scratch resistant solid wood frame with Easy to maintain

leather upholstery. Fade and stain resistant leather upholstery.Unique panel detail on the side with sleek stilt legs. Seating Height: 450mm, Legs

10 SINGLE SEATER SOFA Stainless Steel.The seat cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. 2 87400 174800

The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm.

The polyster polyfill keeps the upholstery wrinke free & soft.The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, SEDEX

Certification, GRIHA Certification. The product should be as per above given specification under the guidance of project architect & Engineer in

charge.1 Seater Dimension (L)840mm X (D)880mm X (H)760mm)

Supplying and placing in position of sofa as per Image. Its stylish contemporary design boasts a kiln-dried solid wood frame and rich leather. The

magnificent frame slopes from the back to the seat giving a stately feeling to your seat. High-density foam is upholstered in highly durable leather

providing an exquisitely divine place to unwind. Durian's leather is procured from the finest Italian tanneries and is stain and fade resistant. Set on sleek

stilt legs, the sofa frame has a unique panel detail that runs onto the cushions as well.Warp and scratch resistant solid wood frame with Easy to maintain

leather upholstery. Fade and stain resistant leather upholstery.Unique panel detail on the side with sleek stilt legs. Seating Height: 450mm, Legs

11 3 SEATER SOFA Stainless Steel.The seat cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. 2 158000 316000

The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm.

The polyster polyfill keeps the upholstery wrinke free & soft.The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1 Certification, SEDEX

Certification, GRIHA Certification. The product should be as per above given specification under the guidance of project architect & Engineer in

charge. 3 Seater Dimesnion: (L) 1960mm X (D)880mm X (H)760mm

Centre table Size

The overall size of the Centre table shall be 1050 mm Length x 550 mm depth, 450 mm height. the table top shall be made up of 18mm thick

prelaminated particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC lipping

12 glued with hotmelt Eva glue free from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The Chair 2 9998 19996

understructure should be provided with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be

rounded & edges shall not be sharp. The legs shall be in angular design & thicker on the top & thinner on the bottom side.

The overall size of the Centre table shall be dia 600mm, 450 mm height. the table top shall be made up of 18mm thick prelaminated particle board of

approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC lipping glued with hotmelt Eva glue free

from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The table understructure should be provided

with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be rounded & edges shall not be sharp.

13 METAL SIDE TABLE 4 8630 34520

The legs shall be in angular design & thicker on the top & thinner on the bottom side.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

The Main table shall be of size 2400 L x 900 D x 760 & Side table size shall be 1800 L x 550 D x 660 H. The worksurface of the main table shall be

made up of 38mm thick E1 grade particle board with melamine finish. with 2mm pvc reverse water fall edge banding on automatic machine. Tabletop

corner shall be round. The modesty panel of the main table 400mm height shall be made up of 18mm thick Pre-laminate particle board E1 norms duly

finished with 2mm pvc edge banding on automatic machine. The modesty panel shall be connected through L-shape Bracket connector. The worktop

shall be connected with the gable end with the help of aluminum corner shall have overall size of 800 L x 49 W x 45 H. Size of gable end at the Top

800 width to connect the Aluminium corner and the bottom with 640mm width. Side unit - Side table shall be size 1800 L x 550 D x 660 H with 16mm

thick E1 grade particle board with melamine finish with 2mm pvc edge bending on automatic machine. Fixed side return with 2 drawers, single swing

14 DIRECTOR TABLE door, open shelf and open space for CPU, with holes for customer put their sockets. Fixed side return shall have flexibility to be placed left or right 7 143130 1001910

during time of first assembly.All the Drawer and shutters shall be operated by finger grove with the help of V shaped aluminium extrustion on the top of

Drawer and shutter facia shall have overall size of 20 L x 34 H x 1.5mm thick. Wirebox on table top, with cover for wire entrance only. Main table top

of 40mm thickness Pre-laminate particle board shall be provided with suitable cut out through CNC Routed Machine and a Cable Dump tray with

PVC/CRCA material shall be mounted to hold switch and socket, Entire cable Dump tray shall be covered with Aluminum extruded with injection

moulded plastic side cover Flip up top of to access switch and socket. Cable Vertebra of PVC shall be provided to enable wire management from floor to

tabletop surface.

High Back Chair : The overall size of Chair shall be Total height 1150 to 1250 +/-5 mm, over all width should be 520 +/-5mm and Overall depth should

be 470 +/-5mm. Back Width 360 mm at Top and 500mm at bottom, Seat Width 520 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 455mm to 555

mm +/-5mm. Seat & back PU cushion shall be uplhostered with leathere.The Chair should be provided with Synchro tilt Mechanism with Multi lock

features. The chair shall have seat depth adjustment.The mechanism shall allow 360 degree revolving feature along with height adjustablility. Single die

casted right trapezium shaped arm rest overall size of 250 L x 190 H & having top upholstered leather on top. The width of the armrest shall be 60mm

DIRECTOR HIGH BACK and overall length on top surface shall be 260mm. The chair back shall have S-curved. Multi lock and seat adjustable nob shall be provided on the left

CHAIR ( leather finish) side below the seat. Tension adjustment knob shall be provided under seat. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards.

Chair shall be provided with aluminium die cast pedetstal having twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017

Mid Back Chair : The overall size of Chair shall be Total height 1050 to 1150 mm, over all width should be 520 mm and Overall depth should be 470

mm. Back shall be tappered design having width 360 mm at top and 500mm at bottom, Seat Width 520 mm, Seat Depth 470 mm and Seat height

455mm to 555 mm. Seat & back PU cushion shall be uplhostered with leatherite. The chair shall have seat depth adjustment operated by user friendly

lever & seat deptt range shall be between 470 to 520 mm. The Chair should be provided with Synchro tilt Mechanism with Multi lock features. The

DIRECTOR VISITOR mechanism shall allow 360 degree revolving feature along with height adjustablility. Single die casted right trapezium shaped arm rest having overall

16 MID BACK CHAIR ( size of 250 L x 190 H & having top upholstered leatherite with foam. The width of the armrest shall be 60 mm and overall length on top surface shall be 21 41786 877506

leather finish) 260mm. The chair back shall have S-curved. Multi lock and seat adjustable nob shall be provided on the left side below the seat. Tension adjustment

knob shall be provided under seat. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Chair shall be provided with aluminium die

cast pedetstal having twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards.

The high back lounge chair shall have overall size of 650 mm width x 720 mm depth x 970 mm height. Seat height shall be 440 mm from ground level.

The entire seat, back and the armrest sides shall be made up of moulded PU foam upholstered in fine fabric. A separate cushion uphosltered in different

color shall be provided of height atlest 250-300 mm for better comfort. The understructure of the table shall be made from solid wood i.e properly

treated & seasoned kiln dried beach wood, finished with clear synthetic PU coating for the best resilence and high durability. The legs and the frame

shall be joined together by method of tenon and mortise for durability and better aesthetics. Four legs shall be provided and the cross section of leg at the

17 SINGLE COUCH bottom shall be 35x35 and top shall be 55x35 provided in tappered finish for better looks. The outer side of the legs shall be rounded & inner side shall 14 30252 423528

be corner edges.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

Supplying and placing in position of coffee table set as per Image.The coffee table set Collection celebrates a simple and airy silhouette perching on

sleek plank legs. The pristine marble-finished slab exhibits unique patterns, while the solid wood frame creates a striking contrast of textures and colours

adding character and depth to the space. Display this set of two coffee tables separately or together to create a conversation area. Thick tabletop with

contrasting solid wood legs make it a statement piece.A solid wood frame provides a sturdy base.Iconic post-modern design elevates modern living

spaces.Lacquer polish ensures high water and stain resistance.Designed in 2 sizes, these tables can be paired together or separated as a statement

piece.Smooth finished edges eliminate moisture seepage, and warping, making it last longer. Material & Subtype:Table Top, Material:Marble -

Composite, Leg Material:Solid Wood, Colour & Colour Family:Brown - Walnut, White. The product should be from manufacturer(OEM) which have

BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1

Certification, SEDEX Certification, GRIHA Certification. The product should be as per above given specification under the guidance of project

architect & Engineer in charge. COST FOR SET

Dimension of Large Table: (W)830mm X (D)830mm X (H)400mm

Dimension of Small Table: (W) 420mm X (D)420mm X (H)450mm

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

SR. OFFICER ROOM

The Main table shall be of size 2000 L x 800 D x 760 & Side table size shall be 1600 L x 550 D x 660 H. The worksurface of the main table shall be

made up of 38mm thick E1 grade particle board with melamine finish. with 2mm pvc reverse water fall edge banding on automatic machine. Tabletop

corner shall be round. The modesty panel of the main table 400mm height shall be made up of 18mm thick Pre-laminate particle board E1 norms duly

finished with 2mm pvc edge banding on automatic machine. The modesty panel shall be connected through L-shape Bracket connector. The worktop

shall be connected with the gable end with the help of aluminum corner shall have overall size of 800 L x 49 W x 45 H. Size of gable end at the Top

800 width to connect the Aluminium corner and the bottom with 640mm width. Side unit - Side table shall be size 1600 L x 550 D x 660 H with 16mm

thick E1 grade particle board with melamine finish with 2mm pvc edge bending on automatic machine. Fixed side return with 2 drawers, single swing

door, open shelf and open space for CPU, with holes for customer put their sockets. Fixed side return shall have flexibility to be placed left or right

19 SR. OFFICER TABLE 1 122636 122636

during time of first assembly.All the Drawer and shutters shall be operated by finger grove with the help of V shaped aluminium extrustion on the top of

Drawer and shutter facia shall have overall size of 20 L x 34 H x 1.5mm thick. Wirebox on table top, with cover for wire entrance only. Main table top

of 40mm thickness Pre-laminate particle board shall be provided with suitable cut out through CNC Routed Machine and a Cable Dump tray with

PVC/CRCA material shall be mounted to hold switch and socket, Entire cable Dump tray shall be covered with Aluminum extruded with injection

moulded plastic side cover Flip up top of to access switch and socket. Cable Vertebra of PVC shall be provided to enable wire management from floor to

tabletop surface.

High Back Chair with Headrest

The overall size of Chair shall be height 1210 to 1330 +/-5 mm, Back Width 495 mm at Top, 385mm at bottom and 380mm at the lumber. Seat Width

500 +/-5 mm, Seat Depth 490 to 550 +/-5 mm and Seat height 480mm to 600 mm +/-5mm range. And over all chair width should be 690 +/-5mm and

Overall chair depth should be 630 to 690 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50%

deflection conforming to IS 3400. Seat shall be upholstered with Polyester & viscose- 380 GLM, Abrasion- > 45000 cycles. The chair shall be supplied

with Lenear Mesh at the back & shall be provided With 290mm width, 180mm height Headrest. Adjustable Lumbar Support full length of size 325

SR. OFFICE HIGH

20 mm,105 mm height and 3mm thickness in contoured form can travel upto 30mm at the back . The Chair should be provided with Synchro tilt 1 40432 40432

Mechanism with Multi lock features. The mechanism shall allow 360 degree revolving feature along with height adjustablility. chair shall have seat

sliding mechanism.Three Way Adjustable Arms to be provied with height adjustment button made of Delrin P 500 and arm height adjustability nob

shall be provided under the armrest. The mechansim shall possess seat to back recline ratio of 3:7.Tension adjustment knob shall be provided under seat.

The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 60 mm dia with PA6 material

complying to ANSI/ BIFMA X 5.1 2017 standards.The Back, Armrest and pedestal shall be provided in same Grey colour.

Mid Back Chair: The overall size of Chair shall be height 1050 to 1170 +/-5 mm, Back Width 495 mm at Top and 385mm at bottom, Seat Width 500 +/-

5 mm, Seat Depth 390 to 450 +/-5 mm and Seat height 480mm to 600 mm +/-5mm range. And over all chair width should be 690 +/-5mm and Overall

chair depth should be 630 to 690 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection

conforming to IS 3400. Seat shall be upholstered with Polyester & viscose- 380 GLM, Abrasion- > 45000 cycles. The chair shall be supplied with

Lenear Mesh at the back & shall be provided With 290mm width. Adjustable Lumbar Support full length of size 325 mm,105 mm height and 3mm

SR. OFFICE VISITOR thickness in contoured form can travel upto 30mm at the back . The Chair should be provided with Synchro tilt Mechanism with Multi lock features.

MEDIUM BACK CHAIR The mechanism shall allow 360 degree revolving feature along with height adjustablility. chair shall have seat sliding mechanism.Three Way Adjustable

Arms to be provied with height adjustment button made of Delrin P 500 and arm height adjustability nob shall be provided under the armrest. The

mechansim shall possess seat to back recline ratio of 3:7.Tension adjustment knob shall be provided under seat. The Gas Lift used shall be class 4 tested

as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 60 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017

standards.The Back, Armrest and pedestal shall be provided in same Grey colour.

The overall size of Chair shall be : Width 710mm , Depth 600mm & Height 1060mm. Seat Size shall be : width 540mm, Actual depth 560mm, Effective

depth 550mm and seat height 460mm. Width of the back shall be 525mm. Back height shall be 590mm as measured from seat level. The chair shall be

supplied with high quality fabric cusion at the back. Seat shall be upholstered with micro fabric 100% polyster 180 GSM having abrasion > 50000

cycles fire rated fabric confirming to BS EN 1021. Chair understructure comes in wooden or metal both. seat cusion size 115mm.chair width with

SINGLE COUCH FOR armrest 710mm and armrest height should be 315mm. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2 certification and Green Guard Gold

22 Certification from valid source. 2 43631 87262

SR. OFFICER ROOM

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

Supplying and placing in position of coffee table set as per Image.The coffee table set Collection celebrates a simple and airy silhouette perching on

sleek plank legs. The pristine marble-finished slab exhibits unique patterns, while the solid wood frame creates a striking contrast of textures and colours

adding character and depth to the space. Display this set of two coffee tables separately or together to create a conversation area. Thick tabletop with

contrasting solid wood legs make it a statement piece.A solid wood frame provides a sturdy base.Iconic post-modern design elevates modern living

spaces.Lacquer polish ensures high water and stain resistance.Designed in 2 sizes, these tables can be paired together or separated as a statement

23 SIDE TABLE piece.Smooth finished edges eliminate moisture seepage, and warping, making it last longer. Material & Subtype:Table Top, Material:Marble -

Composite, Leg Material:Solid Wood, Colour & Colour Family:Brown - Walnut, White. The product should be from manufacturer(OEM) which have

BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA LEVEL-1

Certification, SEDEX Certification, GRIHA Certification. The product should be as per above given specification under the guidance of project

architect & Engineer in charge. COST FOR SET

Dimension Of Large Table: (W)830mm X (D)830mm X (H)400mm

Dimension Of Small Table: (W) 420mm X (D)420mm X (H)450mm

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

The overall size of the Discussion table is 1200 dia.The top shall be made up of 25mm thick pre laminated partical board with 2mm PVC edge band.

Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on top, 45mm

at bottom and of 725mm length to get 750mm table height, it shall acts as vertical structural support member, connected by a horizontal cross beams

50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast connectors. Wire

Management: 450 mm anodised flip up made of anodised aluminum finish, that shall have soft closure and three way wire acess & PVC cable tray for

24 DISCUSSION TABLE entry of cables from the floor into the cable tray. 1 39152 39152

Meeting table in size of 3000 x 1200 x 750 (WDH)mm.

The worksurface of the table shall be made up of 25mm thick Pre-laminate particle board as per E1 norms and its edges duly sealed with 2mm PVC

Lipping on automatic machine at visible sides. Two Long sides of the work surface shall be provided with reverse tapered edge design created by

chamfering the board at 45 degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on automatic

machine. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on

25 MEETING TABLE 9 PAX top, 45mm at bottom and of 725mm length to get 750mm table height, it shall acts as vertical structural support member, connected by a horizontal cross 2 71951 143902

beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast 90deg – 02 way

connectors. Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry

cover made up of steel sheets.

The Board room table, overall size shall be 12900L x 2250D x 750H. The main table shall be size of 2250L x 750D x 750H and Addon table shall be

Nine on both side with the size of 1350L x 750D x 750H. The main table shall be provided on one side. The table top shall be made up of 25mm thick

pre-laminated particle board of E1 norms. The modesty panel shall be of 18mm thick PLPB E1 norms. The sides of the worktop shall be sealed with

2mm thick PVC Edge band. The understructure of table shall be made of 25mm thick pre laminate partical board with 2mm pvc edge band finished. For

26 BOARD ROOM TABLE ease of wire management, a 450 mm length & 142mm breadth flip up cover made up of aluminum having soft closure & with option to fix laptop ring 1 314777 314777

should be provided. A MS cable tray shall be provided below the worktop to mount switches and sockets and vertical wire entry shall be provided.

The overall size of Chair shall be : Total height 1160 to 1260 +/-5 mm, Back Width 480 mm at Top and 420mm at bottom, Seat Width 500 +/-5 mm,

Seat Depth 460+/-5 mm and Seat height 460mm to 560 mm +/-5mm range. And over all chair width should be 615 +/-5mm and Overall chair depth

should be 640 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS

3400. Seat, back & headrest shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion-100000 cycles over PU faom. The

chair shall be supplied with addtional Dynaflex mechanism Two Piece Back Construction with cushion foam at 55kg/m3 density having PP back.

Hardness of 25+3kgf at 50% deflection conforming to IS 3400. Back shall be provided With 260mm width, 160mm height and 50mm height adjastable

BOARD ROOM HIGH Headrest. The Chair should be provided with Synchro tilt Mechanism with three Multi lock features. The mechanism shall allow 360 degree revolving

BACK CHAIR feature along with height adjustablility. chair shall have seat sliding mechanism. One Way Adjustable Arms (Height) to be provied with height

adjustment button made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per

ANSI BIFMA standards. Aluminium die cast pedestal having length of prongs 310 mm with 50 mm height towards centre & 25 mm height outside.

Twin wheel castors to be provided.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

The overall size of Chair shall be : Total height 1050 to 1150 +/-5 mm, Back Width 480 mm at Top and 420mm at bottom, Seat Width 500 +/-5 mm,

Seat Depth 4t0+/-5 mm and Seat height 460mm to 560 mm +/-5mm range. And over all chair width should be 615 +/-5mm and Overall chair depth

should be 640 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS

3400. Seat & back shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion- 100000 cycles over PU foam. No

flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used.

The chair shall be supplied with addtional Dynaflex mechanism Two Piece Back Construction with cushion foam at 55kg/m3 density having PP back.

BOARD ROOM Hardness of 25+3kgf at 50% deflection conforming to IS 3400 The Chair should be provided with Synchro tilt Mechanism – with three Multi lock

MEDIUM BACK CHAIR features. The mechanism shall allow 360 degree revolving feature along with height adjustablility. chair shall have seat sliding mechanism. One Way

Adjustable Arms (Height) to be provied with height adjustment button made of Delrin P 500. The mechansim shall possess seat to back recline ratio of

3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Aluminium die cast pedestal having length of prongs 310 mm with 50 mm

height towards centre & 25 mm height outside. Twin wheel castors to be provided.

The partition based system shall be with main and return spine in 60 mm thick made by 1.2 mm thick CRCA sheet confirming to IS 513: (2008), IS

13871:1993. The profile of verticals should be able to slide the tiles thickness of 6 mm. The verticals shall have multiple slots for carrying the data and

power cables and provision for fixing MS brackets Slots shall be provided at different heights for fixing table top brackets, tiles and shelves. There shall

be minimum three slots at different levels to accommodate raceways at skirting and table top levels. There shall be options of carrying the cables both

above and below the table top as per the requirement. The slot cut out should be made by CNC machines to avoid sharp edges and burr. There shall be

minimum four horizontal members in each frame- top , middle levels and at the skirting level. The horizontal members shall be made from CRCA sheets

formed in “C” shape in hydraulic press. The CRCA sheets shall be confirmed to IS 513: (2008), IS 13871:1993. The horizontal members shall be

fabricated with welded joints to the vertical which makes the frames sturdy and facilitates carriage of cables at different levels. The middle cross

members shall have minimum two slots for carriage of cable vertically from the floor to the raceways. The vertical and the cross members shall be CO2

MIG welded to IS 816, ISO 9692- ISO 9692-3. The bottom cross member should be elevated by 120 mm from the floor level. All the frames should be

fitted with M10 leveling bolts to adjust to ground undulations and capable of adjustment +/- 20 mm. the MS bolt shall be zinc pacified with insert

molded in PVC shoes. All frames are fixed with aluminum trims confirming to IS – 733. The top and end trims shall be minimum 1.2 mm thick

extrusions confirming to IS-733:2017 and ISO -2768-2, EN AW 755-2, EN AW 573-3. These trims are finished in an epoxy powder coating finish. The

aluminum trims and MS brackets shall be powder coated. The aluminum trims and MS brackets undergoes 7 step rust resistance pre treatment process

viz degreasing, pickling as per IS standard conforming to ASTM D 1186, ASTM D 1737, DIN 5156, IS 2360, IS 101, ASTM D 522, 523. ASTM D3451

– 06, -DIN EN 14901 - DIN EN ISO 9227, IS 3618 – 2016. The workstations shall be bifma level 2 certified. After pre pre-treatment process, the

components are NANO coated and passified for better adhesion of paint as per IS 3618 - 2016. The components are powder coated with epoxy polyester

powder to the thickness of 50-60 microns as per IS 101 and oven baked at 180 degrees for getting the scratch resistance finish. Product undergoes the

following testing process for durability and functionality, cross cut test for ensuring adhesion of powder coating as per IS standard, Salt spray test for

ensuring the rust resistance. The connectors to the frames should have Aluminum die cast connectors confirming to IS 742, IS 2600, ADC-12 material

29 WORKSTATION TABLE confirming to ASTM E 1251-2011, IS 7658-1990 & IS 11035 – 2014, IS 1608 – 2018. Panel Finishes : Finishes of panel above the worktop can be

fabric pinup/fabric/laminate + Glass writable marker board or single finish tile with raceway on main spine. Finishes of main spine panel below the

worktop the hollow panel should be made of PLPB tile. Raceway can be provided above/below the worktop.

Table : The overall size of table shall be 1500L x 750D x 750H. & side storage 1200L x 450D x 750H. The worktop shall be made up of 25mm thick

PLPB, Modesty Panel shall be 18mm thick PLPB both E1 norms duly sealed with 2mm pvc edge band. Modesty shall be provided at the front and side

of the table. Modesty shall be connected with 3 nos L-shape pressure aluminium die casted connector of 50 mm width. The cabin main tables shall be

supported by special design legs. The legs at the visitor’s side shall be 90° and other side shall be 110°. The legs shall be Dia 44mm ERW Tube

confirming to IS 4923 : 1997 – 16g. Main leg members shall be connected through a horizontal member size 1.6mm thk, 50x25 cold formed ERW tube

by the aluminium die casted connector which having opening of 44mm dia on vertical side & 50 x 25 on the horizontal side to accommodate connection

of Leg & horizontal frame.The legs shall have clear & tough polycarbonate leg bush & swivel type levelers to cater for floor undulations ± 20 mm. The

legs shall be connected with Cross beams. The Cross Beams shall be of 40x20 mm ERW tubes- 16 g. The cross beams shall be connected to the legs

with specially designed Aluminum Die Cast connectors by using Hi Tensile Allen bolts as per the design. High pressure aluminum die cast connectors

are of ADC-12 material confirming to ASTM E 1251-2011, IS 7658-1990 & IS 11035 – 1190. For chemical composition and IS 1608 – 2005 for UTS &

Ys. The Engineering plastic components shall be made with Acrylonitrile butadiene styrene (ABS) which are confirming to ASTM D256 for Izod

Impact (1/4”) for Leg shoe and levelers. The spacers shall be fitted to the main leg to give a floating look as well to support the table top. The spacers

shall be made of Polycarbonate (PC). Side Composite Storage (Openable Shutter +2D+1F) Top & Sides : 18mm Thk pre laminated particle board Back

E1 norms: 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Handle. Handless Finger groove shall be created on

top edge of shutter doors by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then

sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable number lock shall be provided.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

The overall size of Chair shall be : width 600 +/-5mm, depth 640 +/-5mm. Total height 1170 to 1270 +/-5 mm, Back Width 425 mm at Top and 500mm

at bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat made up of foam pre moulded at

55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM

abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The back

frame shall be made up of Injection molded PPGF 20% in light grey shade, armest support also in light grey shade. PU Adjustable Lumbar Support full

length of size 365 mm, 110 mm height and 25mm thickness. The Chair should be provided with Self Calibrating Multilock Mechanism (Bio Snchyro

WORKSTATION HIGH

30 mechansim) that should adjust the tension of the back sensing weight of the user. The mechanism shall allow 360 degree revolving feature along with 6 18433 110598

height adjustablility. One Way Adjustable Arms (Height) to be provied with height adjustment button of size 73mm x 18mm made of Delrin P 500. The

mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Metal base shall be

provided of light grey color matching the chair back & armrest.

The overall size of Chair shall be height 870 to 970 +/-5 mm, Back Width 415 mm at Top and 450mm at bottom, Seat Width 480 +/-5 mm, Seat Depth

440+/-5 mm and Seat height 460mm to 560 mm +/-5mm range. over all chair width should be 560 +/-5mm and Overall chair depth should be 670 +/-

5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be

upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one hour of placement

of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The back frame shall be made up of PPGF and the injection

molded in grey color, armrest also in grey color. The chair shall be supplied with Mesh Back rest. The Chair should be provided with center tilt two

WORKSTATION position lock Mechanism. The mechanism shall allow 360 degree revolving feature along with height adjustablility. Fixed arms connected to seat and

VISITOR CHAIR . back in the same contour. The mechansim shall possess seat to back recline ratio of 1:1. The Gas Lift used shall be class 4 tested as per ANSI BIFMA

standards. Nylon Base in grey color to be provied. Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. the

axle pin shall be rust protected zinc passivated. The base shall be made up of mild steel powder coated in grey shade to match the entire grey theme of

The overall size of workstation shall be 1500L x 600D x 750H.The worktop shall be made of 25mm thick pre laminate partical boards with E1 norms

dully finish with 2mm pvc edge band all the side of worktop. The understucture shall be made up of Loop leg of CRCA Pipe having cross section of

55mm x 12mm x 61mm x 12mm x 55mm x 1.6 mm. The side modesty shall be made up of 12mm thick PLT with 450mm height. Horizontal cross

beams under table top that shall be connected to all 4 vertical legs through pressure die cast aluminium connector.The Intermediate leg: Two Verticals of

Intermediate leg will have to be with 60x40mm rectangular ERW tubes and both legs are joined using a beam section of 40x40x1.6mm thk at the top

side. The 60x40 verticals to have through “U” notch or through cut out of 40x41mm size at the top side to locate 40x40 cross beam. Understructure shall

powder coated upto 40 to 60microns.The Raceways shall provided below the work surface for carrying wires from one end to other end of the cluster,

Size offered shall 250mm Ht, Thickness 70mm. Provided with separator for data and power cables. Designed to accommodate 50-60 CAT-6 cables.The

“Hook on” raceway covers shall provided with opening from either side. The cover shall made of MS Powder coated metal/prelam particle board. The

switch/sockets shall mounted on the Raceway covers as per the client requirement Switches. For entry of cables from the floor into the cable tray, Wire

Entry covers shall provided between the intermediate legs with separator for entry of power and data. 30mm thick screen shall be provided above the

table top. The screen size shall be 1050L x 350H x 30mm thick. The design of the screen is made fully in an aluminum frame work. The structure of

Linear workstation with screen frame shall be constructed by using special anodizing grade (6063-T6 grade) of aluminum extrusion confirming to ISO -2768-2, EN AW 755-2,

32 EN AW 573-3. The screen frame work shall be connected by Corner Clamps of 0.8 mm thick CRCA steel, passivated in Zinc Blue. The CRCA shall be 8 36664 293312

mobile pedestal (2D+1F)

confirming to ISO -2768-2, EN AW 755-2, EN AW 573-3. The connectors shall be made by Satin finished high pressure Zinc (Mazak 5) die cast caps

confirming to IS:713.1981 The screen shall have aluminum top and side trims of 1.2 mm thick confirming to IS-733:2017. The screen design should

offer tiles option of Fabric and glass marker. The tiles thickness should be 6mm thick. The aluminium trims shall be anodized in compliance with IS

1868:2016 to the thickness of 10-12 microns confirming to EN-12373, IS 2360:2017. Fire retardant special fabric shall be used of 340 GSM.

Upholstery: Fire rated fabric confirming to BS EN 1021-1, BS 7176 & ISO 105-B02 standards.

Mobile Drawer Unit : It shall be of size of 400 x 450 x 600 (WDH) mm made up of 18mm thick Pre-laminate particle board as per E1 norms and its

edges duly sealed with 2mm PVC Lipping on automatic machine at visible sides. Drawer front & sides shall be made up of 18mm, back 9 mm thick pre

laminated particle board of E1 grade with visible edges sealed with 2mm PVC edge band. The drawer side surface shall be provided with finger groove

handle-less design. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside

at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be provided. Tolerance of +/- 5mm to be

considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

The overall size of Chair shall be width 600 +/-5mm, depth 640 +/-5mm. Total height shall be 995 to 1095 +/-5 mm, Back Width 425 mm at Top and

500mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat shall be made up of foam

pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100%

polyster 180 GSM abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh

Back rest. The back frame shall be made up of Injection molded PPGF 20% in light grey shade, armest support also in light grey shade.. Adjustable

WORKSTATION Lumbar Support made up of PU having size 365 mm x 110 mm x 25mm thick shall be provided for better comfort. The Chair should be provided with

33 MEDIUM BACK CHAIR Self Calibrating Multilock Mechanism (Bio Snchyro mechansim) that should adjust the tension of the back sensing weight of the user. The mechanism 8 16284 130272

( Mesh finish) shall allow 360 degree revolving feature along with height adjustablility. One Way Adjustable Arms (Height) to be provied with height adjustment

button of size 73mm x 18mm made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4

tested as per ANSI BIFMA standards. Metal base shall be provided of light grey color matching the chair back & armrest.

Cabin Table in size of 1800W X 900D X 750H, Side unit of 900W X 450D X 750H Table Top: 25mm thick Pre laminate particle board E1 norms with

2mm PVC edge lipping on all exposed edges. Two Long sides of the work surface shall be provided with reverse tapered edge design created by

chamfering the board at 45 degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on automatic

machine. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on

top, 45mm at bottom and of 725mm length to get 750mm table height, it acts as vertical structural support member, connected by a horizontal cross

beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast 90deg – 02 way

connectors. The connector should have “V” / “U” shape tapered groove for sliding a Aluminium diecast slider nut. The slider nut shall be an Aluminium

diecast part that has same taper as of “V” / “U” shape in the diecast connector. Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of

34 AGM MAIN TABLE 450mm Ht. Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry 2 66628 133256

cover. Cross Beam: Leg to Leg shall be connected using cross beams made from 50x25x1.60mm (16g) Rectangular tube and to give floating look & to

connect the table top with cross beams injection moulded polycarbonate spacers should be used of dia 61mm x 42.50mm H insert moulded with M6x1P

zinc blue plated bolt of 22mm L.Spacer height including bolt should be 64.50mm. Side Composite Storage (Openable Shutter +2D+1F) Top & Sides :

18mm Thk pre laminated particle board Back E1 norms: 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board

Handle. Handless Finger groove shall be created on top edge of shutter doors by providing a reverse tapered profile edge of 6mm straight surface & 12

mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable number lock shall be

The overall size of Chair shall be : Total height 1145 to 1245 +/-5 mm, Back Width 400 mm at Top and 435mm at bottom, Seat Width 500 +/-5 mm,

Seat Depth 455+/-5 mm and Seat height 455mm to 555 mm +/-5mm range. And over all chair width should be 670 +/-5mm and Overall chair depth

should be 670 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS

3400. Seat shall be upholstered with 100% polyster fabric 325 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one hour

of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Nylon mixed

polyster Mesh at the back & shall be provided With 295mm width, 155mm height fixed head rest. Adjustable Lumbar Support full length of size 365

AGM HIGH BACK mm , 80 mm height and 4mm thickness in contoured form can travel upto 80mm at the back. The Chair should be provided with synchro mechanism

CHAIR with single lever with Three position lock . The mechanism shall allow 360 degree revolving feature along with height adjustablility. The mechanism

shall allow 360 degree revolving feature along with height adjustablility. One Way Adjustable Arms (Height) to be provied with height adjustment

button made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI

BIFMA standards. Nylon Base to be provied. Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. the axle

pin shall be rust protected zinc passivated. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced

with bottom ribbing for additional buttress and strength. The OEM shall have ISO 9001, ISO 14001, BIFMA Level-2 and GreenGuard Certification.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

The overall size of Chair shall be : Total height 965 to 1065 +/-5 mm, Back Width 400 mm at Top and 435mm at bottom, Seat Width 500 +/-5 mm, Seat

Depth 455+/-5 mm and Seat height 455mm to 555 mm +/-5mm range. And over all chair width should be 670 +/-5mm and Overall chair depth should

be 670 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat

shall be upholstered with 100% polyster fabric 300 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one hour of

placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Nylon mixed polyster

AGM VISITOR MEDIUM Mesh at the back. Adjustable Lumbar Support full length of size 365 mm , 80 mm height and 4mm thickness in contoured form can travel upto 80mm at

36 the back. The Chair should be provided with synchro mechanism with single lever with Three position lock . The mechanism shall allow 360 degree 4 18550 74200

revolving feature along with height adjustablility. The mechanism shall allow 360 degree revolving feature along with height adjustablility. One Way

Adjustable Arms (Height) to be provied with height adjustment button made of Delrin P 500. The mechansim shall possess seat to back recline ratio of

3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 50 mm dia with PA6 material

complying to ANSI/ BIFMA X 5.1 2017 standards. the axle pin shall be rust protected zinc passivated. The base shall be 660 mm PCD (26 inches) five

pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength.

Cabin Table in size of 1650W X 900D X 750H, Side unit of 1200W X 450D X 750H Table Top: 25mm thick Pre laminate particle board E1 norms with

2mm PVC edge lipping on all exposed edges. Two Long sides of the work surface shall be provided with reverse tapered edge design created by

chamfering the board at 45 degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on automatic

machine. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on

top, 45mm at bottom and of 725mm length to get 750mm table height, it acts as vertical structural support member, connected by a horizontal cross

beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast 90deg – 02 way

connectors. The connector should have “V” / “U” shape tapered groove for sliding a Aluminium diecast slider nut. The slider nut shall be an Aluminium

PA TABLE WITH SIDE diecast part that has same taper as of “V” / “U” shape in the diecast connector. Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of

UNIT 450mm Ht. Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry

cover. Cross Beam: Leg to Leg shall be connected using cross beams made from 50x25x1.60mm (16g) Rectangular tube and to give floating look & to

connect the table top with cross beams injection moulded polycarbonate spacers should be used of dia 61mm x 42.50mm H insert moulded with M6x1P

zinc blue plated bolt of 22mm L.Spacer height including bolt should be 64.50mm. Side Composite Storage (Openable Shutter +3D+1F) Top & Sides :

18mm Thk pre laminated particle board Back E1 norms: 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board

Handle. Handless Finger groove shall be created on top edge of shutter doors by providing a reverse tapered profile edge of 6mm straight surface & 12

mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable number lock shall be

The overall size of Chair shall be : width 600 +/-5mm, depth 640 +/-5mm. Total height 1170 to 1270 +/-5 mm, Back Width 425 mm at Top and 500mm

at bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat made up of foam pre moulded at

55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM

abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The back

frame shall be made up of Injection molded PPGF 20% in light grey shade, armest support also in light grey shade. PU Adjustable Lumbar Support full

PA TABLE HIGH BACK

38 length of size 365 mm, 110 mm height and 25mm thickness. The Chair should be provided with Self Calibrating Multilock Mechanism (Bio Snchyro 2 18433 36866

mechansim) that should adjust the tension of the back sensing weight of the user. The mechanism shall allow 360 degree revolving feature along with

height adjustablility. One Way Adjustable Arms (Height) to be provied with height adjustment button of size 73mm x 18mm made of Delrin P 500. The

mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Metal base shall be

provided of light grey color matching the chair back & armrest.

The overall size of Chair shall be height 870 to 970 +/-5 mm, Back Width 415 mm at Top and 450mm at bottom, Seat Width 480 +/-5 mm, Seat Depth

440+/-5 mm and Seat height 460mm to 560 mm +/-5mm range. over all chair width should be 560 +/-5mm and Overall chair depth should be 670 +/-

5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be

upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one hour of placement

PA TABLE MIDIUM of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The back frame shall be made up of PPGF and the injection

39 molded in grey color, armrest also in grey color. The chair shall be supplied with Mesh Back rest. The Chair should be provided with center tilt two 4 14372 57488

position lock Mechanism. The mechanism shall allow 360 degree revolving feature along with height adjustablility. Fixed arms connected to seat and

back in the same contour. The mechansim shall possess seat to back recline ratio of 1:1. The Gas Lift used shall be class 4 tested as per ANSI BIFMA

standards. Nylon Base in grey color to be provied. Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. the

axle pin shall be rust protected zinc passivated. The base shall be made up of mild steel powder coated in grey shade to match the entire grey theme of

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

The overall size of the café table is 1200 dia. The top shall be made up of 18mm Hydroshield material to enable use of table in cafeteria and water

reistant. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on

top, 45mm at bottom and of 725mm length to get 750mm table height, it shall acts as vertical structural support member, connected by a horizontal cross

40 ROUND CAFÉ TABLE beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast connectors. 10 28446 284460

The overall size of Chair shall be Total height 1100 +/-3 mm, Over all chair width should be 490 +/-5mm and Overall chair depth should be 550 +/-

5mm. Back Width 360mm at Top and 440mm at bottom, Seat Width 420 +/-3 mm, Seat Depth 425+/-3 mm and Seat height 770mm +/-5mm . Seat and

back shell should made by injuction moulding process with plastic material of PPGF20%.Seat and back shall be PU form and shall be uplhostered with

micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used.The Chair

41 CAFÉ CHAIR understructure should be provided with 12 mm thickness MS rod loop legs, front legs connected with each other with rod to form foot rest & back legs 40 5536 221440

also connected with each other with rod conforming to IS – 7887. Injuction moulded Polycarbonate Leg shoes shall assembled to understructure. seat

assembled shall be with silicon bushes to ensure stratch free when chairs stached. Understructure shall powder coated upto 40 to 60microns.

Reception table : The overall size of the reception table shall be 2400 mm length, 750 mm depth & 1050 mm height. On the front side both ends shall be

provided with groove design strips to enhance the overall look. At the centre of the front side L shape surface shall be provided fixed up with hinges to

paste logo of the University. The entire table shall be made up of 25mm / 18mm thick pre laminated particle board of E1 norms. Inside of table a

working height shelf should be provided or height 750 mm to keep desktop/ laptop and normal working with sitting. the edges of the visible surface

42 RECEPTION TABLE 1 125331 125331

shall be sealed with 2mm thick PVC lipping on automatic machine. Unless specified tolerance of +/- 5mm to be considered for product dimensions

Length, Depth & height and tolerance of 5% to be considered in thickness & size of material & components used.

Supplying, and placing in position of sofa as per Image. The sofa is crafted from the best materials to make a sofa that's truly worthy of your living room.

Upholstered in a premium leatherette, the sofa is a sight for sore eyes. The curved box cut design adds an

elegant charm to any space. The solid wood frame and legs give a sturdy presence to the sofa. Seating Height 425mm,Legs Solid Wood. The seat

cushion is made of multi-layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The product should be

RECEPTION SOFA 3

43 from manufacturer(OEM) which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA 3 88800 266400

Certification, BIFMA LEVEL-1 Certification, SEDEX Certification, GRIHA Certification. The product should be as per above given specification

under the guidance of project architect & Engineer in charge. 3 seater Dimension (W)1800mm X (D)710mm X (H)770mm

Supplying, and placing in position of sofa as per Image. The sofa is crafted from the best materials to make a sofa that's truly worthy of your living room.

Upholstered in a

premium leatherette, the sofa is a sight for sore eyes. The curved box cut design adds an

elegant charm to any space. The solid wood frame and legs give a sturdy presence to

44 the sofa. Seating Height 425mm,Legs Solid Wood. The seat cushion is made of multi 6 47000 282000

layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The product should be from manufacturer(OEM)

which have BIFMA COMPLIENT Certification, INDIAN DESIGN MARK Certification, GREEN PRO Certification, AIOTA Certification, BIFMA

LEVEL-1 Certification, SEDEX Certification, GRIHA Certification. The product should be as per above given specification under the guidance of

project architect & Engineer in charge. 1 seater Dimension(W)800mm X (D)710mm X (H)770mm

Centre table Size

The overall size of the Centre table shall be 1050 mm Length x 550 mm depth, 450 mm height. the table top shall be made up of 18mm thick

prelaminated particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC lipping

45 glued with hotmelt Eva glue free from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The Chair 3 9998 29994

understructure should be provided with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be

rounded & edges shall not be sharp. The legs shall be in angular design & thicker on the top & thinner on the bottom side.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

The overall size of the Centre table shall be dia 600mm, 450 mm height. the table top shall be made up of 18mm thick prelaminated particle board of

approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC lipping glued with hotmelt Eva glue free

from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The table understructure should be provided

46 METAL SIDE TABLE . with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be rounded & edges shall not be sharp. 6 8630 51780

The legs shall be in angular design & thicker on the top & thinner on the bottom side.

The overall size shall be 900 x 450 x 1350 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle board E1 norms and Back shall be

made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated particle

board. Shutters to be provied for compartment. Planter Box Shall height of 150mm to keep the planter pot. Edge: All exposed shall be sealed with 2mm

PLANTER STORAGE

47 thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-less design for a streamlined look. Finger groove shall be 16 20633 330128

created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum

2mm thick PVC lipping on automatic machine. Number Lock faciltity should be provided for safe storage of documents.

Overall size of rack shall be size of W1800 x D 435 x H 1775 : The complete frame work shall of modular in construction and shall be made of

aluminium extrusions and aluminium diecast connectors. All the aluminium extrusions shall be of size 20x20mmx2mm wall thickness.The product

shall be elevated by 75mm from floor and every leg shall be fitted with ABS injection moulded leg bush. The aluminium connectors and extrusions shall

come with powder coating finshall h at 40-60 microns. The aluminium extrusions with 18mm shall be used to offer 18mm thk prelam partical board

48 DISPLAY UNIT shelves, so that the top surface of prelaminated particle board will be in same line with extrusion surface. All the connectors shall be pressure diecast 2 83577 167154

connectors in ADC-12 material confirming to ASTM E 1251-2011, shall 7658-1990 & shall 11035 – 1190 for chemical composition and shall 1608 –

2005 for UTS & Ys. All connectors come with M5 threads to fix M5x0.8P CSK screw.

The overall size of back to back sofa shall be 1800L x 1350D x 775H. Both side of sofa shall be provide end table with size of 300mm length with

675mm depth. The end table shall be made of 18mm thick prlam partical board with 2mm pvc edge band all the side. The seating height that is under-

structure with sofa cushions shall be 450mm. The sofa shall be designed with sleeker and tapered arm rests and back top. The sofa structure shall be

made up of wooden structure made from treated & seasoned solid wood and plywood fixed with the combinations of 32 & 40 density PU foams for seat

and back rest, upholstered with polyester fabric of 450 glm, having abrasion resistance more than 50K rubs, colour fastness to light better than 5, colour

Modualar back to back 4 fastness to rubbing 4-5. The Under-structure shall be a distinctive 3D design, made from laser cut metal roll formed steel with Overall size of 575mm L

49 x 192mm D x 260mm H made in the close tolerance of +/- 3mm. Leg top beam shall be made up of 40x20x1.60mm thick rectangular profile tube, the 2 112458 224916

vertical legs shall be tapered square to round tube profiles with Sq.30mm at top gradually tapered to get round diameter of 19mm (+/-2mm) at the

bottom. The bottom portion of the dia 19 shall be formed to make it perpendicular to the floor / ground. Each leg shall be fixed with M8 hex bolt insert

moulded nylon leveller of diameter 40mm and with an option to adjust the leg height upto 15mm based on floor undulation. The leg to leg shall be

connected using cross beams of 40x20x1.60mm thk rectangular ERW CR tubes. All metal parts come with Powder Coating Finish of 50–80micron thk.

The overall size of modular designer sofa shall be 5830L x 1730D x 775H. Sofa shall have 4 size of seat combination with one end table. The end table

shall be size of 600L x 675D with made of 18mm thick pre laminate partical board.The seating height that is under-structure with sofa cushions shall be

450mm. The sofa shall be designed with sleeker and tapered arm rests and back top. The sofa structure shall be made up of wooden structure made from

treated & seasoned solid wood and plywood fixed with the combinations of 32 & 40 density PU foams for seat and back rest, upholstered with polyester

fabric of 450 glm, having abrasion resistance more than 50K rubs, colour fastness to light better than 5, colour fastness to rubbing 4-5. The Under-

structure shall be a distinctive 3D design, made from laser cut metal roll formed steel with Overall size of 575mm L x 192mm D x 260mm H made in

50 Modular 9 seater sofa 2 229787 459574

the close tolerance of +/- 3mm. Leg top beam shall be made up of 40x20x1.60mm thick rectangular profile tube, the vertical legs shall be tapered square

to round tube profiles with Sq.30mm at top gradually tapered to get round diameter of 19mm (+/-2mm) at the bottom. The bottom portion of the dia 19

shall be formed to make it perpendicular to the floor / ground. Each leg shall be fixed with M8 hex bolt insert moulded nylon leveller of diameter 40mm

and with an option to adjust the leg height upto 15mm based on floor undulation. The leg to leg shall be connected using cross beams of 40x20x1.60mm

thk rectangular ERW CR tubes. All metal parts come with Powder Coating Finish of 50–80micron thk.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Description Technical Specifications TOTAL QTY Rate Amount

The overall size of circular sofa shall be 2800L x 2800mm dia.The seating height that is under-structure with sofa cushions shall be 450mm. The sofa

shall be designed with sleeker and tapered arm rests and back top. The sofa structure shall be made up of wooden structure made from treated &

seasoned solid wood and plywood fixed with the combinations of 32 & 40 density PU foams for seat and back rest, upholstered with polyester fabric of

450 glm, having abrasion resistance more than 50K rubs, colour fastness to light better than 5, colour fastness to rubbing 4-5. The Under-structure shall

be a distinctive 3D design, made from laser cut metal roll formed steel with Overall size of 575mm L x 192mm D x 260mm H made in the close

51 Circular 8 seater sofa tolerance of +/- 3mm. Leg top beam shall be made up of 40x20x1.60mm thick rectangular profile tube, the vertical legs shall be tapered square to round 2 320185 640370

tube profiles with Sq.30mm at top gradually tapered to get round diameter of 19mm (+/-2mm) at the bottom. The bottom portion of the dia 19 shall be

formed to make it perpendicular to the floor / ground. Each leg shall be fixed with M8 hex bolt insert moulded nylon leveller of diameter 40mm and with

an option to adjust the leg height upto 15mm based on floor undulation. The leg to leg shall be connected using cross beams of 40x20x1.60mm thk

rectangular ERW CR tubes. All metal parts come with Powder Coating Finish of 50–80micron thk.

TOTAL 13839335

Digitally signed by AMIT