OUT SOURCING OF SERVICES FOR OPERATION AND MAINTENANCE OF ELECTRIC SUPPLY LIFT AT CABS AND EXTERNAL ELECTRIC SUPPLY AT NEW STIR AND CABS UNDER GE I RD EAST BANGALORE

Amount

Outsourcing of services for maintenance and operation of MES sub station at CABS HT11 KV/415 volts for 3 shifts each of 8 hrs duration including operation of HT/LT switch gear, capacitor bank and maintaining the log sheets round the clock including Sunday & Holidays. First shift – 0600 hrs to 1400 hrs (Electrician -1, Helper-1) Second shift – 1400 hrs to 2200 hrs (Electrician -1, Helper-1) Third shift – 2200 hrs to 0600 hrs (Electrician -1,) Items to be maintained and operated are as under :- (i) Transformer out door type – 400 KVA -1 No. (ii) Transformer out door type –1000 KVA -2 No (iii) Two pole structure of KPTCL –1 No (iv) Two pole structure with GOS DOL fuses etc. (v) Feeder pillar box (vi) HT/ LT panel board of following (a) VCB panel – 3 Nos ( HT Panel) (b) ACB panel- 03No (LT Panel) (c) Capacitor panel –02 Nos (LT panel) (d) MCCB panel – 3 No (LT panel) (vii) operating Gen set of 500 KVA/62.5 KVA & 50 KVA at CABS completly control panel/ battery of all capacity

(A) Nature of work involved are as under :- (i) Replacement of led any wattage bulbs of any type drivers , Surge proction devices (ii) Daily checking of oil levelling the transformer and topping up of oil if required and observing any leakage in the transformer and checking of TF oil for the required board. (iii) Replacement of DOL fuses (iv) Periodical examination of feeder pillar boxes and LT panel board for any loose connections and tightening the same if required. (v) Attending faults in all perimeter lights and building, security lights by replacing lamp chokes or any other connecting components. (vi) Maintaining the following documents (a) Log sheets and complaints slips. (b) Register for earthing test results. (c) Register for IR Test results. (vii) Inspecting and testing the earth pits 40 Nos for proper earth resistance not exc 2 ohms and improving by pouring water if found less than test results should be recorded and signed by both the parties. (viii) day to day maintence of complaint at CABS all as directed by Engineer-in-Charge , but essential for smooth functioning of the delete installations.

(ix) attending day to day complaints, 11KV break down including checking of fuse, internal electrification in which maintenance of all internal power sockets, UPS sockets & bus ducts LT panel, UPS panels DB's in each floor, all light fittings, security lights, Hanger light, complete wiring in all buildings in CABS including all hangers, AEW&C, MES building, security blds, MT, pump house, sub station and AC plant including maintenance of perimeters lightings, area lighting, flood lighting, Attending faults in 5/15 amps sockets single phase and three phase power points distribution boards, feeder pillar boxes, control panels of all type etc., including internal wiring of buildings ceiling fans, exhaust fan complete.

Outsourcing of services for maintenance and operation of MES sub station at STIR HT11 KV/415 volts for General shifts of 8 hrs duration including operation of HT/LT switch gear, capacitor bank and maintaining the log sheets General shift – 0800 hrs to 1500 hrs (Electrician -1, Helper-1) Items to be maintained and operated are as under :- (i) Transformer out door type – 1000 KVA - 4 No. (ii) Two pole structure of KPTCL –1 No (iii) Two pole structure with GOS DOL fuses etc., (iv) Feeder pillar box (v) HT/ LT panel board of following (a) VCB panel – 3 Nos ( HT Panel) (b) ACB panel- 01 No (LT Panel) (c) Capacitor panel –02 Nos (LT panel) (d) MCCB panel – 1 No (LT panel) (vii) operating Gen set of 500 KVA x 2 with SYN Cotroller at STIR completly control panel/ battery of all capacity

(A) Nature of work involved are as under :- (i) Replacement of led any wattage bulbs of any type drivers , Surge proction devicesignitor and ballasts (ii) Daily checking of oil levelling the transformer and topping up of oil if required and observing any leakage in the transformer and checking of TF oil for the required board. (iii) Replacement of DOL fuses (iv) Periodical examination of feeder pillar boxes and LT panel board for any loose connections and tightening the same if required. (v) Attending faults in all perimeter lights and building, security lights by replacing lamp chokes or any other connecting components. (vi) Maintaining the following documents (a) Log sheets and complaints slips. (b) Register for earthing test results. (c) Register for IR Test results. (vii) Inspecting and testing the earth pits 40 Nos for proper earth resistance not exc 2 ohms and improving by pouring water if found less than test results should be recorded and signed by both the parties. (viii )Any other unforeseen job required and as directed by Engineer-in-Charge , but essential for smooth functioning of the installations..

(ix) attending day to day complaints, 11KV break down including checking of fuse, internal electrification in which maintenance of all internal power sockets, UPS sockets & bus ducts LT panel, UPS panels DB's in each floor, all light fittings, security lights, Hanger light, complete wiring in all buildings in CABS & STIR including all hangers, AEW&C building, security office, MT, pump house, sub station and AC plant including maintenance of perimeters lightings, area lighting, flood lighting, Attending faults in 5/15 amps sockets single phase and three phase power points distribution boards, feeder pillar boxes, control panels of all type etc., including internal wiring of buildings ceiling fans, exhaust fan complete.

Outsourcing of services for day to day complaints and maintenance of CABS & STIR electrical maintenance of buldings, air conditioning,& solar panel at buldings in General shift – 0800 hrs to 0500 hrs (Electrician -1, Helper-1)

Nature of work involved are as under :- (i) Replacement of led any wattage bulbs of any type drivers , Surge proction devicesignitor and ballasts (ii) Periodical examination of Solar Panel in New hanger ANNEX roof top, Cleaning the solar panel with water ever one in a week & feed back reports to the AGE E/M office (iii) Replacement of MCCB/MCB (iv) Periodical examination of feeder pillar boxes and LT panel board for any loose connections and tightening the same if required. (v) Attending faults in all perimeter lights and building, security lights by replacing lamp chokes or any other connecting components. (vi) Maintaining the following document (vii) Inspecting and testing the earth pits 40 Nos for proper earth resistance not exc 2 ohms and improving by pouring water if found less than test results should be recorded and signed by both the parties. (viii )Any other unforeseen job required and as directed by Engineer-in-Charge , but essential for smooth functioning of the installations..

Outsourcing of services for maintenance and operation for 8 passanger lifts at Admin bld , Techinical bld (MT) &13 passenger/ cum goods lift at AEW &C electrically driven catering for 4 floor including ground floor installed at CABS General Shift 0800 hrs to 1700 hrs (01 Lift Operator for shift)

Outsourcing of services for maintenance and operation for passenger cum goods lifts of capacity 8 passanger 2 Nos & Goods lift of capacity 2500 Kgs electrically driven catering for 4 floor at new hanger annex blds including ground floor installed at CABS General Shift 0800 hrs to 1700 hrs (01 Lift Operator for shift)

Note for Item Ser No. 1 to 5 (i) Necessary two Nos uniform duly marked as Category of workers and mobile facility shall be provided to all operators . The rate shall be deemed to include for the same. (ii) Contractor will provide ITI certificate for tradesmen or minimum experience of 4 years from reputed organization (iii) PF, ESI of all tradesmen/helper is required & payment should be given through Bank account only (iv) If contractor fails to provide the tradesmen /helper the recovery should be @1500 per shift (v) Contractor will provide all the required Documents , Register, Tools, uniform, First Aid Box etc. at the duty places

(vi) Contractor shall arrange to attend emergency and break down calls and the system should be brought back to workable condition with minimum possible time as assessed by the Engineer-in-Chrage. The rate quoted by the contrator shall deemed to be included the provision also. (vii) Contractor shall submit the periodical service report, break down repairs and spares replaced by the service men in the format as approved by the Accepting Officer. This report shall be submitted to GE along with payment claims by the contractor. (viii) The labour charges for servicing and replacement of minor spares shall be deemed to be included in the rate quoted by the contractor. (ix) The contractor should maintain the AC plant and BMS system room and AHU rooms for inspection as and when asked by Engineer-in-Charge (x) Contractor should maintain data sheet /log sheet separately for AC Plant & inside design temperature / and humidity floor wise should be recorded . (xi) All the registers /charts required for inspection should be maintained by the contractor and display as and when directed by Engineer-in-Charge for inspection.

Point wiring complete with Multi stranded copper conductor size 1.5 sqmm PVC insulated, unsheathed,FRLS cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC surface type conduit / casing capping on walls/ floors/ ceiling etcwith and including flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly,cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed.

One light/ fan/exhaust fan point controlled by one way switch

One 3 pin socket point 5 Amps on the independent board.

Supply & fix switch modular type single pole 1 way 5 Amp 230 volt complete as directed.

Supply & fix socket 6 Amps modular type, 230 volts grade all as directed.

M & L for submain wiring of 2 run 6 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC casing capping /conduit accessories concealed in wall/roof including one run of 6Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge. Make: Finolex/Havells/Gloster,

Supply & fix SPN enclosure with a two pin and earth plug ,socket complete with one single pole MCB. Make : Havells/ Legrand/Schneider

M & L for submain wiring of 4 run10Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC casing capping /conduit accessories concealed in wall/roof including one run of 2x10Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge. Make: Finolex/Havells/Gloster,

M & L for submain wiring of 4 run 16 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC casing capping /conduit accessories concealed in wall/roof including one run of 16Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge. Make: Finolex/Havells/Gloster,

S&F Recessed LED Ceiling tile provided with adrop down acrylic diffuser to give more uniformily up lighting for white balanced effect suitable for 2 X 2 modular ceiling LED luminaire with 36 W LED , suitable for Armstrong/ Gride ceiling, Make ;- Havells/crompton/phillips

Supply, fixing and testing of 25W LED post lantern light fittings IP65 with spun aluminum landscape luminaire long life with high power LEDs as source of light, all pre wired fixed on the GI pipe including dismantling the existing unserviceable light fitting complete all as directed by Engineer-in -charge. Make Havells Cat No :- LHEVBGP7PN6K025/ Philips/Crompton.

S&F Recessed mounted panel round in a light weight plastic body up lighting for white balanced effect suitable for 195mm 18Watts Make ;- Havells/crompton/phillips

S&F Recessed mounted panel in a light weight plastic body up lighting for white balanced effect suitable for 200X200 mm 20 Watts Make ;- Havells/crompton/phillips

S&F out door end termination kit, heat shrinkage type suitable for 11 KV, XLPE, UG aluminium conductor cable of size 4 core 16 sqmm to 35 Sqmm and testing after jointing all as directed. Make :- Denson or equivalent in M-Seal/Raychem

C R R CONSTRUCTIONS

SAI CONSTRUCTIONS

Sai Ram Builders

Sahara Engineers

Siddivinayaka Constructions

R R Constructions

Lucky Enterprises