Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹4.4 L
EMD Value
₹8,732
Closing Date
11 Aug 2022, 11:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer(Civil)
Executive Engineer(Civil), BSNL Civil Division,Thanjavur
Re-Erection of 40 Metre (Gopalpur Type) Tower at Mallipattinam (2nd call)
2022_BSNL_124122_1
NIT-08/BSNL CD TNJ/2022-23
Open Tender
Civil Works
Item Rate
60 days
Mallipattinam
Please refer Tender documents.
4 documents required · 4 mandatory
₹590
Yes
AO(Cash), BSNL, Thanjavur
₹8,732
Yes
12 Aug 2022
29 Jul 2022
11 Aug 2022
30 Jul 2022
11 Aug 2022
30 Jul 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
(a) All kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.
Removal of waste / obsolete materials like parabolic antennae, m.s mounts etc dumped over the RCC stems mechanically using JCB, disposal of wastes and safe stacking of serviceable materials, all as directed by the Engineer in charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:2:4 (1 cement : 2 M.sand : 4 graded stone aggregate 20 mm nominal size)
15 mm cement plaster on rough side of single or half brick wall of mix :
1:6 (1 cement: 6 coarse sand)
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work.
Chipping R.C.C. work mechanically by means of pneumatic hammer for exposing 32 mm dia M.s anchor bolts , thorough cleaning of the rusted length of anchor bolts by means of Dr. Fixit"Rustclean" / Fosroc rust remover or equivalent , thorough washing , cleaning and greasing of anchor bolts without damaging the threaded portion, including disposal of rubble away from site upto 50 metres lead all complete as per directions of Engineer - in- charge.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Erection of four legged ground based angular light weight communication tower of 40 m height using available M.S hot dipped galvanised sections , including sorting, lifting, assembling, fitting and fixing up all tower members in position true to alignment , including hoisting and bolting with necessary bolts, nuts and washers , fixing of ladder, working platform, cable guide rack, pipestand for lightning arrestor at required level all complete including painting with one coat of Etch primer (consisting of Polyvinyl Butyral phosphoric acid catalyst and Zinc Chromate base. They should be mixed before use in the ratio of four parts base to one part catalyst ) , one coat of Epoxy based Zinc Phosphate primer and two coats of synthetic enamel paint of colour White and International Orange , as per the directions of the Engineer in charge , including providiing necessary safety precautions to protect human lives and structures nearby during the course of erection , insurance coverage to labourers and including all tools, plants , equipments , machinery required for works as per relevant I.S codes and specification.
Supplying and fixing high tensile strength fasteners consisting of galvanised iron nuts, washers and spring washers of varying sizes at appropriate locations as directed by the Engineer in charge.
Transportation of 40 m tower materials(Gopalpur Type) from BSNL store yard at K.Pudur , Madurai to the tower site at MALLIPATTINAM , including loading and unloading complete.
Arrangement of labour including tools and plant, conveyance charges to and from site for conducting acceptance testing of tower and earthing all as directed by the Engineer in charge.
Supply and erection of Horizontal gantry arrangements of required size in m.s angles , flats, channels , etc including painting with two coats of Zinc Chromate primer all as directed by the engineer in charge.
Fabrication of G.I tower materials consisiting of Gusset plates channels , cleats, corner angles , flats etc for re-punching , enlargement of holes matching the members , to enable, proper fitting and assembling of tower members at the designated locations , by means of Gas welding plant offsite , including transportation cost from the site to the workshop and back , all complete as per the directions of the Engineer in charge.
Providing ring earth by running G.I flat of size 50 x3 mm alround the tower at a minimum of 1.00 metre away from the tower base in ground for a width of 30 cm and a depth of 1.50 metres from the ground level including required excavation Each tower legs are to be connected to the ring earth by means of G.I flat of size 50 x 3 mm below the groundlevel. All connections are to be made with 10 mm dia G.I bolts and nuts , with a lead strip of 1.00 mm thickness in between for proper surface contact. Both ends of the G.I flat shall be brought to ground level and terminated all complete as directed by the Engineer in charge.
Providing and fixing G.I strips of 50 x3 mm sizes of approved quality , one end connected to the bottom of lightning arrestor and the other end connected to the ring earth / plate earth with 2 Nos of 10mm dia G.I bolts and nuts at every connection . The G.I strip shall be clamped to the tower at uniform intervals at 1.50m using necessary Porcelain insulator clamps with bolts and nuts , to avoid direct contact with tower as directed by the Engineer in charge.
Providing and fixing spike type lightning arrestor made of 16 dia solid Copper Rod of required length with necessary fixtures at the top of the tower. The spike shall be insulated by Teflon material and connected to G.I Plate / Ring Earth by insulated 70 sqmm multistrand Copper Wire / G.I strip with proper lugging arrangement as directed by the Engineer in charge. ( The cost of GI strip shall be paid separately.)
Supplying and fixing LED aviation obstruction lamp of insta power/ GELTRONIX/ MICROTECH or equivalent of approved make as per ICAO norms with light dependent resistance sensor (Day light automatic timer) with necessary power cable , switch including fixtures all complete as directed by the Engineer in charge.
Single dome low intensity flashing Red obstacle lighting syatem -Type B mounted at 40 metres height.
O.THAVAMANI
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .