supply and installation of Gym Gymnastic equipments outdoor Gym and children park sliders swings climbers and other related equipments

Chest Shaper a) Item Specification Size: 1125x710x2200 mm Maximum User Weight: 120Kg Main Post: NB (Nominal Bore) 100mm and thickness 4.5mm (category medium) Other Pipes: NB 25mm and 3.2mm thick (Category Medium) Material: GI (Galvanized Iron) pipe (YSt 310 as per table 2 of IS 1161-2014) and powder coated 110-150 micron thick using Akzo Nobel or equivalent and should be able to withstand temperature ranging from 45°C to -5°C and coating must be resistant to direct sunlight, UV rays, rain and dew. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed. GI Pipes shall be cleaned by sand blasting. All GI pipes should be ISI/BIS marked. Zinc primer paint to be applied at all welding joints prior to finishing. Open ends of pipes to be closed with GI/LLDPE caps. Base plate cover to be made of virgin LLDPE Plastic by rotational molding with minimum 8mm thickness and shall be UV resistant and color. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. The design of equipment should be Vandalism proof. All the self-locked nuts and bolts/fasteners shall be properly galvanized, and should not disassemble without the use of tools. b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Triple twister (a) Item Specification Size: 1350x1200x1250 mm Maximum User Weight: 120Kg Main Post: NB (Nominal Bore) 100mm and thickness 4.5mm (category medium) Other Pipes: NB 25mm and 3.2mm thick (Category Medium) Material: GI (Galvanized Iron) pipe (YSt 310 as per table 2 of IS 1161-2014) and powder coated 110-150 micron thick using Akzo Nobel or equivalent and should be able to withstand temperature ranging from 45°C to -5°C and coating must be resistant to direct sunlight, UV rays, rain and dew. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed. GI Pipes shall be cleaned by sand blasting. All GI pipes should be ISI/BIS marked. Zinc primer paint to be applied at all welding joints prior to finishing. Open ends of pipes to be closed with GI/LLDPE caps. Base plate cover to be made of virgin LLDPE Plastic by rotational molding with minimum 8mm thickness and shall be UV resistant and color. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. The design of equipment should be Vandalism proof. All the self-locked nuts and bolts/fasteners shall be properly galvanized, and should not disassemble without the use of tools. b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Horse Rider (a) Item Specification Size: 1110x555x1480 mm Maximum User Weight: 120Kg Main Post: NB 100mm and thickness 4.5mm (Category Medium) Other Pipes: NB 50mm and 3.6mm thick (Category Medium) Material: GI (Galvanized Iron) pipe (YSt 310 as per table 2 of IS 1161-2014) and powder coated 110-150 micron thick using Akzo Nobel or equivalent and should be able to withstand temperature ranging from 45°C to -5°C and coating must be resistant to direct sunlight, UV rays, rain and dew. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed. GI Pipes shall be cleaned by sand blasting. All GI pipes should be ISI/BIS marked. Zinc primer paint to be applied at all welding joints prior to finishing. Open ends of pipes to be closed with GI/LLDPE caps. Base plate cover to be made of virgin LLDPE Plastic by rotational moulding with minimum 8mm thickness and shall be UV resistant and colour. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. The design of equipment should be Vandalism proof All the self-locked nuts and bolts/fasteners shall be properly galvanized, and should not disassemble without the use of tools. b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Cycle (a) Item Specification Size: 930x550x1030 mm Maximum User Weight: 120Kg Main Post: NB 100mm and thickness 4.5mm (Category Medium) Other Pipes: NB 50mm and 3.6mm thick (Category Medium) Material: GI (Galvanized Iron) pipe (YSt 310 as per table 2 of IS 1161-2014) and powder coated 110-150 micron thick using Akzo Nobel or equivalent and should be able to withstand temperature ranging from 45°C to -5°C and coating must be resistant to direct sunlight, UV rays, rain and dew. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed. GI Pipes shall be cleaned by sand blasting. All GI pipes should be ISI/BIS marked. Zinc primer paint to be applied at all welding joints prior to finishing. Open ends of pipes to be closed with GI/LLDPE caps. Base plate cover to be made of virgin LLDPE Plastic by rotational molding with minimum 8mm thickness and shall be UV resistant and colour. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. The design of equipment should be Vandalism proof. All the self-locked nuts and bolts/fasteners shall be properly galvanized, and should not disassemble without the use of tools. (b)Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Abs Shaper (a)Item Specification Size: 1490x1890x720 mm Maximum User Weight: 120Kg Main Post: NB 100mm and thickness 4.5mm (Category Medium) Other Pipes: NB 50mm and 3.6mm thick (Category Medium) Material: GI (Galvanized Iron) pipe (YSt 310 as per table 2 of IS 1161-2014) and powder coated 110-150 micron thick using Akzo Nobel or equivalent and should be able to withstand temperature ranging from 45°C to -5°C and coating must be resistant to direct sunlight, UV rays, rain and dew. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed. GI Pipes shall be cleaned by sand blasting. All GI pipes should be ISI/BIS marked. Zinc primer paint to be applied at all welding joints prior to finishing. Open ends of pipes to be closed with GI/LLDPE caps. Base plate cover to be made of virgin LLDPE Plastic by rotational molding with minimum 8mm thickness and shall be UV resistant and colour. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. The design of equipment should be Vandalism proof. All the self-locked nuts and bolts/fasteners shall be properly galvanized, and should not disassemble without the use of tools. b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Air Walker (a)Item Specification Size: 1080x470x1365 mm Maximum User Weight: 120Kg Main Post: NB 100mm and thickness 4.5mm (Category Medium) Other Pipes: NB 80mm and 4mm thick (Category Medium) Material: GI (Galvanized Iron) pipe (YSt 310 as per table 2 of IS 1161-2014) and powder coated 110-150 micron thick using Akzo Nobel or equivalent and should be able to withstand temperature ranging from 45°C to -5°C and coating must be resistant to direct sunlight, UV rays, rain and dew. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed. GI Pipes shall be cleaned by sand blasting. All GI pipes should be ISI/BIS marked. Zinc primer paint to be applied at all welding joints prior to finishing. Open ends of pipes to be closed with GI/LLDPE caps. Base plate cover to be made of virgin LLDPE Plastic by rotational molding with minimum 8mm thickness and shall be UV resistant and colour. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. The design of equipment should be Vandalism proof. All the self-locked nuts and bolts/fasteners shall be properly galvanized, and should not disassemble without the use of tools. (b) The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Rowing/Back Shaper (a)Item Specification Size: 1120x610x720 mm Maximum User Weight: 120Kg Main Post: NB 100mm and thickness 4.5mm (Category Medium) Other Pipes: NB 50mm and 3.6mm thick (Category Medium) Material: GI (Galvanized Iron) pipe (YSt 310 as per table 2 of IS 1161-2014) and powder coated 110-150 micron thick using Akzo Nobel or equivalent and should be able to withstand temperature ranging from 45°C to -5°C and coating must be resistant to direct sunlight, UV rays, rain and dew. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed. GI Pipes shall be cleaned by sand blasting. All GI pipes should be ISI/BIS marked. Zinc primer paint to be applied at all welding joints prior to finishing. Open ends of pipes to be closed with GI/LLDPE caps. Base plate cover to be made of virgin LLDPE Plastic by rotational molding with minimum 8mm thickness and shall be UV resistant and colour. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. The design of equipment should be Vandalism proof. All the self-locked nuts and bolts/fasteners shall be properly galvanized, and should not disassemble without the use of tools (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Back & Waist Relaxer (a) Item Specification Size: 1440*690*1480 mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 33mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Chest Shaper Double (a) Item Specification Size: 2000*700*2200 mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 33mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent Marino impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in- built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Shoulder Shaper Double (a)Item Specification Size: 2000*700*2200 mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 33mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Surf Board (a) Item Specification Size:1440*749*1405mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps,base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. ( b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Parallel Bar (a) Item Specification Size: 1340*830*1240mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 33mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Cross Trainer (a) Item Specification Size: 940*630*1240mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 33mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Treadmill (a) Item Specification Size: 870*600*980mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Bike (a)Item Specification Size: 870*600*980mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Side Support (a)Item Specification Size: 870*600*980mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Air Walker (a) Item Specification Size: 1070*460*1360mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 88mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Arm Relaxer (a)Item Specification Size: 980*1130*1410 mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Monkey Bar (a) Item Specification Size: 1490*1880*715 mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Standing Knee Raise (a)Item Specification Size: 630*740*1590mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Arm Wheel (a)Item Specification Size:840*640*1650mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 88mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Weight Lifting Station (a)Item Specification Size: 840*430*1650mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 88mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Knee Joint Trainer (a) Item Specification Size:840*640*1650mm Main Post: 100 mm dia and 3.0mm thick Other Pipes: 88mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Leg Press (a)Item Specification Size: 2129*400*1805mm Main Post: 100 mm diaand3.0mm thick Other Pipes: 88mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Balancing Beam (a)Item Specification Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Chin Up Bar (a)Item Specification Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Dipping bar (a)Item Specification Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Hurdles (a)Item Specification Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Double Swing (a)Item Specification Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: PU Paint finish with Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Deluxe Slide (a)Item Specification Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: PU Paint finishing. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

See-Saw (a)Item Specification Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: PU Paint finish with Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

Bridge Ladder (a)Item Specification Main Post: 100 mm dia and 3.0mm thick Other Pipes: 60mm dia 2.5 mm thick Material: PU Paint finishing. The equipment shall be fitted with in-built limiters. (b) Fixation/installation Specification The equipment shall be fixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

ANIMAL MGR (a)Item Specification 1. The animal Merry Go Round (MGR) should consist of ducks made up of fiber Reinforced Plastics (FRP) and MGR Frame made by Linear Low Density Polyethylene (LLDPE) of Grade -36RA045 (Food Grade Plastic) with density 963 kg/m3 . 2. The material should be anti-oxidant and UV protected to avoid colour fading. The material should be tested with weather ablity test, carbon test, melt flow index test, fatigue test. 3. Foot rest made from15NB Galvanized pipe with end caps welded to two plates forming a foot rest. 4. All the Fibre Reinforced Plastics (FRP) material are processed by the hand laid process which is Considered to be the best of its type in the wherein the process is as follows: A) After the preparation of the mould is done a layer of gel coat tested as per IS 6746:1994 is applied which is of N.P.G which is duly mixed with U.V stabilized pigment to give the required colour to the product. B) Then a coat of G.P resin tested as per standard IS 6746: 1994 is applied above the surface of the gel coat after it becomes tack free. C) The constitutive layers of C.S.M (chopped strand matt) as per IS 11551-1996, glass fibre are laid down along with resin to the required extend to build up the required thickness in sandwich pattern. D) The back side coating of the resin is done to give a smooth finish. E) The moulds are kept open to dry for a specified duration. This procedure strengthened the F.R.P F) After the mould is completely cured for the specified duration the FRP IS removed from the mold. Then all the corners and edges of it are ground to make them smooth and harmless from the strands of the glass wool. 5. Bearing assembly with two bearings: 1. Ball Bearing no. 6209Z for smooth rolling action. 2. Taper Roller Bearing to take vertical thrust due to rolling moment & applied weight. 6. Frame: a. MGR Frame made from 40NB pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the animal (duck) over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. The GI plated bowl is used to cover the top of the bearing assembly. b. 80NB hot dip galvanized center support pipe of length 500mm conforming to IS 1239 with GI thickness of 60. This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate of OD 200 for assembling the bearing. c. 450mm ISA Foundation angle for strong foundation conforming to standards IS-808-1964. (b) Fixation/installation Specification FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipment’s with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

CIRCULAR HORIZONTAL SCRAMBLER (a)Item Specification The main frame is made from 20 NB and 25 NB GI pipes, to form a circular shape. The main frame is supported on 80 NB GI pipe (04 no’s). An extra supported of 25 NB pipe is given to avoid any kind of bending moment. The pipes are powder coated to avoid rusting and giving it an esthetic look. The platform is supported by 80 NB GI pipes. Two nos. of FRP platforms are provided on either side to reach the scrambler. (b) Fixation/installation Specification FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipment’s with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

FOUR SEATER ARC SWING (a) Item Specification 80NB Pipe bended & welded together to form a strong frame to withstand both the pitching & yawing moment. The with a flange & ISA 80NB pipe is hot dip galvanized pipe of height 2900mm conforming to IS 1239 with GI thickness of 60µ. 50NB Top Pipe with two Arc Swing Flanges welded at both its ends. Pipe can withstanding torsional stress created due to swinging motion. These 50NB top pipes (2 nos. for Four seater Arc Swing) are hot dip galvanized pipe of length 2950mm conforming to IS 1239 with GI thickness of 60µ. Special swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin The S-Hook is specially designed to house a Bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic. (b)Fixation/installation Specification FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipment’s with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes. ( C) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

FRP PLATFORM MGR (a)Item Specification 1. FRP Platform Dia.1800 thickness min. 5mm with checker texture for anti-skid surface. 2. SS Nut Bolts conforming to ASTM E-1086: 1994 3. Frame reinforced with FRP Platform for its rigidity, made from ISA 40x40x5 & 25x25x5 including ISF 130x50x10 & 65x50x5 all welded together to a 25NB Bend pipe to form a structural frame. ISA & ISF conforming standards IS-808-1964 & IS 1730-1961 respectively. 4. 80NB hot dip galvanized center support pipe of length 500mm conforming to IS 1239 with GI thickness of 60 This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top with OD 200 for assembling the bearing. 5. Railings which are designed conforming to EN 1176-1:1998 (4.2.4.6) for standard grip requirement, are made from 20NB Galvanized Pipe conforming to IS 1239 with GI thickness of 60 Railing frame conforming to EN 1176-1:1998 (4.2.7.2) for safety against entrapment of head & neck. The Frame (3nos.) are fixed to the FRP platform reinforced structure. 6. Two ISA 40x40x5 welded at center to form a strong foundation frame assembled to the base plate of the stand. 7. MGR Triangular Frame made from C-Channel 75x40x5 welded together to form a triangular frame with plates welded to the three vertices for mounting the FRP Platform. The C-Channels are used following the standards IS 1173-1967 & GI coated for rust free operation. 8. Bearing assembly with two bearings: 1. Ball Bearing for smooth rolling action. 2. Taper Roller Bearing to take vertical thrust due to rolling moment & applied weight. 3. Conforming to EN 1176-1:1998 - 4.2.6 for safety standard for ground clearance below moving equipment. All the Fibre Reinforced Plastics (FRP) material are processed by the hand laid process which is considered to be the best of its type in the wherein the process is as follows: A) After the preparation of the mould is done a layer of gel coat tested as per IS 6746:1994 is applied which is of N.P.G which is duly mixed with U.V stabilized pigment to give the required colour to the product. B) Then a coat of G.P resin tested as per standard IS 6746: 1994 is applied above the surface of the gel coat after it becomes tack free. C) The constitutive layers of C.S.M (chopped strand matt) as per IS 11551-1996, glass fibre are laid down along with resin to the required extend to build up the required thickness in sandwich pattern. D) The back side coating of the resin is done to give a smooth finish. E) The moulds are kept open to dry for a specified duration. This procedure strengthened the F.R.P F) After the mould is completely cured for the specified duration the FRP IS removed from the mould. Then all the corners and edges of it are ground to make them smooth and harmless from the strands of the glass wool. (b) Fixation/installation Specification FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipment’s with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

MULTI SEATER SEE-SAW (a)Item Specification 1. See Saw should be conforming to EN 1176-6:2008 for safety requirements for free height of fall. 2. Ergonomically designed Rotational Molded seat should be 300milimeterx190milimeterx70milimeter. 3. See Saw Lever should be made from 80NB Galvanized Pipe conforming standards IS 1239 with strong load carrying capacity. 4. See Saw stand should be with special Nylon-6 bush enclosed in a seamless pipe hinged to 50NB Support pipe. The stand is fixed with ISA for strong foundation grip. 5. The roto products should be manufactured using material LLDPE (Linear Low Density Polyethylene) of Grade -36RA045 (Food Grade Plastic) with density 963 kg/m . The material is added with anti- oxidant & 12% UV for protecting the product from color fading. The material is tested with weather ability test, carbon test, M.F.I. (Melt Flow Index) test, fatigue test. The mold is fixed to three arm bi-axial rotational molding machine & kept in the oven for about 20 minutes up to temperature of 180-210 Degrees. The overall product obtain is a seam- -less to ensure perfect blend of uniform thickness & durability. (b) Fixation/installation Specification FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipment’s with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

MULTILANE SLIDE (2 LANES) (a)Item Specification All the Fibre Reinforced Plastics (FRP) material should be processed by the hand laid process which is considered to be the best of its type in the wherein the process is as follows: A) After the preparation of the mould is done a layer of gel coat tested as per IS 6746:1994 is applied which is of N.P.G which is duly mixed with U.V stabilized pigment to give the required colour to the product. B) Then a coat of G.P resin tested as per standard IS 6746: 1994 is applied above the surface of the gel coat after it becomes tack free. C) The constitutive layers of C.S.M (chopped strand matt) as per IS 11551-1996, glass fibre are laid down along with resin to the required extend to build up the required thickness in sandwich pattern. D) The back side coating of the resin is done to give a smooth finish. E) The moulds are kept open to dry for a specified duration. This procedure strengthened the F.R.P F) After the mould is completely cured for the specified duration the FRP IS removed from the mould. Then all the corners and edges of it are ground to make them smooth and harmless from the strands of the glass wool. 2. Cross Checkered Railing: 820x690x40mm Rotational Molded Material – LLDPE Grade - 36RA045 (Food Grade) Density - 963 kg/m. 3. Slide Entry Railing: should be conforming to EN 1176-1:2008 for safety requirement (access to the starting section above free height of fall 1m). 3. FRP Trapezium Platform 1.86x0.888x0.09m (5mm Thk.) FRP Trapezium platform with top layer measuring 30 hardness when measured with Barcol Hardness tester conforming to D2583-75 standard method for indentation hardness of plastics. The top layer should be abrasion resistant. 4. Hand Grip conforming to EN1176-1:1998. 5. Ladder Frame 25NB & 20NB Frame GI Pipe conforming to IS 1239(Part 1):1979 6. Ladder Step - Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176- 1:1998. 7. T-Support 1. 80NB GI Pipe Length 495mm welded to 80NB GI Plated Pipe 500mm with two 80NB HDPE End Caps & two 70x50x10 Clits. 2. ISA conforming to IS-808-964 welded together to form a trap-zium frame to be bolted to the deck pipes at the bottom for holding all the four deck pipes together & make the structure strong. 3. 80NB hot dip galvanized Deck pipe of length 5000mm conforming to IS 1239 with GI thickness of 60µ. 4. The roto products should be manufactured using material LLDPE (Linear Low Density Polyethylene) of Grade - 36RA045 (Food Grade Plastic) with density 963 kg/m . The material is added with anti- oxidant & 12% UV for protecting the product from color fading. The material is tested with weather ability test, carbon test, M.F.I. (Melt Flow Index) test, fatigue test. The mold is fixed to three arm bi-axial rotational molding machine & kept in the oven for about 20 minutes up to temperature of 180-210 Degrees. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. 5. Platform Guard Rail height (from Platform) 780mm conforming to EN 1176-1:2008 (4.3.2) for safety requirement for free height of fall higher than 1m. (b)Fixation/installation Specification FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipment’s with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

MAPS – 05 (a)Item Specification Area: 8m x 9m Safe Area: 9m x 11m 1. Sq. Deck 5’ ht: 1. The platform should be made up of Fiber Reinforced Plastic with anti-skid surface with thickness of 4-5 mm. The top canopy is made of Fiber Reinforced Plastic with a minimum thickness of 2-3 mm. Roto flag is attached on top. 2. Square Deck 3’ ht with Canopy: The platform should be made up of Fiber Reinforced Plastic with anti-skid surface with thickness of 4- 5 mm. The top canopy is made of Fiber Reinforced Plastic with a minimum thickness of 2-3 mm. Roto flag is attached on top. 3. Bowl Slide 3’ ht: The bowl slide chute should be made up of fiber glass reinforced plastic (FRP) molded one and is of attractive color and shade. The design of FRP bowl slide has minimum permissible joints suitable for children such that child does not fall down while sliding down. The FRP slide is 3-4 mm thick. There is a suitable handgrip on the side of the Slide. The landing support is made up of 25 NB GI pipes. The slide entry is also made of LLDPE in Rotational molding process. 4. FRP Bridge 8’ Long: The FRP Bridge should be made from Fiber Reinforced Plastic of 4 – 5 mm thickness. It has railing made from Rotational molding process with support of 20 NB GI pipes. 5. FRP Tunnel 6’ Long: The tunnel should be a pipe shaped module of specific dia made from Fiber Reinforced Plastic of 3-4 mm thickness. 6. Swinging Bridge 8’ Long: The swinging bridge is made of rotational molded planks and is suspended with galvanized chains. The frame is of 80NB pipes with railing made from LLDPE & is supported by 20NB GI pipes. 7. Spiral Slide 5’ height: Spiral slide chute is made of fiber reinforced plastic having shell thickness of 4-5 mm. The slide is supported on 80 NB GI pipe. The landing module is supported by 20 NB pipe. The railing is made up of LLDPE in Rotational molding process. It is support by 20 NB GI pipe. 8. FRP Ladder: The ladder is made up of FRP with a thickness of 3-4mm. The top surface of the ladder should be such that it should not deserve any kind of skid movement. 9. Rock Climber 5’ ht: The rock climber is made up of Fiber Reinforced Plastic (FRP). The rocks are molded on same platform. The climber is supported by 25 NB pipe at the bottom for ground support. 10. Wave Slide 5’ ht: The Wave Slide chute is made up of 4-5 mm thick of Fiber Reinforced Plastic. The wave shape is given in such a manner that it will not give any jerk or bump to the rider. Rotational molded slide entry is provided at top of the slide. The chute has its end such as it causes safe landing of the child. The landing portion is horizontal with respect to the ground. The supports provided are made up of 25 NB GI pipe. (b) Fixation/installation Specification FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

TODDLER SWING (a)Item Specification 1. Rubber dip molded swing chain of dia. 6mm & 1450mm Long. 2. S-Hook of dia 8mm & 145x130 Triangular hook of Grade SS 304 3. Bucket Seat tested for the rubber hardness using Shore Durometer Type A scale conforming ASTM D2240 with value of approx. 50 4. 50NB Top Pipe with Flange welded at its center & covered both sides with end caps. Pipe can withstanding torsional stress created due to swinging motion. This 50NB top pipe is hot dip galvanized pipe of length 2950mm conforming to IS 1239 with GI thickness of 60m. 5. Special swing clamps made up of two parts are joined together with M6 Allen bolts along with S- Hook & a specially designed swing pin. The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic. 6. 100NB Pipe welded together to form a rigid vertical support frame to withstand pitching, rolling & yawing moment. The with a circular flange & square plate 100NB pipe is hot dip galvanized pipe of height 2775mm conforming to IS 1239 with GI thickness of 60 The ISA & tor rods are fixed to the lower end of the pipe so as to make strong foundation. 7. All the Fibre Reinforced Plastics (FRP) material are processed by the hand laid process which is considered to be the best of its type in the wherein the process is as follows: A) After the preparation of the mould is done a layer of gel coat tested as per IS 6746:1994 is applied which is of N.P.G which is duly mixed with U.V stabilized pigment to give the required colour to the product. B) Then a coat of G.P resin tested as per standard IS 6746 : 1994 is applied above the surface of the gel coat after it becomes tack free. C) The constitutive layers of C.S.M (chopped strand matt) as per IS 11551-1996, glass fibre are laid down along with resin to the required extend to build up the required thickness in sandwich pattern. D) The back side coating of the resin is done to give a smooth finish. E) The moulds are kept open to dry for a specified duration. This procedure strengthened the F.R.P F) After the mould is completely cured for the specified duration the FRP IS removed from the mould. Then all the corners and edges of it are ground to make them smooth and harmless from the strands of the glass wool. (b) Fixation/installation Specification FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipment’s with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

VIP BENCH (a)Item Specification 1. C - Section FRP channel strip of thickness upto 5mm and 1200mm long with wooden finish bolted to both the side frames. The Bench strip consists of nylon end caps provided at the two ends of strips for covering the ends. 2. Designer VIP Bench frame made from sand casting method. (b) Fixation/installation Specification FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipment’s with the seaters. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

GARDEN SWING (a)Item Specification The garden swing should consists of fiber reinforced plastic (FRP) seat and roof. The FRP roof which provides shade and it should be supported by 20 NB galvanized pipe at the top and whole assembly of roof should be supported by 40 NB GI Pipe on both sides. The FRP roof should be PU painted which gives aesthetic tile appearance to garden Swing. The FRP seat should consist of C-section channel with wood finish of good quality and reinforced with GI coated ISA which adds good strength to it. The FRP seat should be supported by 25 NB GI pipe at the both sides and it is suspended with galvanized chains. All pipes used should be corrosion resistant GI pipes to avoid rusting which will enhance the product life. (b) Fixation/installation Specification FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipment’s with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified. (c) Replacement / Repair Replacement/ repair/Warranty as per satisfaction of client of HPSHHCL for a period of two years from the date of installation. Note:- The quoted price should be rate of item, installation charges, replacement/ repair/Warranty for a period of two years from the date of installation, transportation of items to premises of client organisation and transit insurance (if any) but exclusive of GST on such item and services.

UTKARSH ENTERPRISES

Suresh Scientific traders

Radhika Enterprises

SUPER DELUXE SPORTS INDUSTRIES

M SONS STEEL FURNITURE INDUSTRY

Parvati Medical Store, Shamshi Kullu

mahaluxmi medical agencies

HIMDEV BUSINESS SOLUTIONS PRIVATE LIMITED

V R Enterprises

M/s Neha Creations

TOY VILLE

Suresh Scientific traders

UTKARSH ENTERPRISES

M SONS STEEL FURNITURE INDUSTRY

SUPER DELUXE SPORTS INDUSTRIES