Improvements to purna palam rani sawargaon khandali Kalegaon Ahmedpur shirur tajband udgir mogha togari to state border road, sh-249 Km.201/900 to 216/00, tq. Udgir Dist. Latur.

Amount

PART – A (Work Portion)

ITEM No. 1 :- Dressing of side shoulder / Scrapping the road side shoulder by Mechanical means (By JCB / DOUZER) including excavation of raised side shoulders upto 15 centimetre depth including removing / cutting bushes, grass and dressing shoulder to desired camber and disposing of excavated stuff up to road boundary etcetera complete as directed by Engineer-in-charge.

ITEM No. 2 :- Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts and leads and spreading for embankment or stacking as directed. By Mechanical Means.

ITEM No. 3 :- Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts and leads and spreading for embankment or stacking as directed.

ITEM No. 4 :- Dismantling of existing B.T. Surface (flexible Pavement) to a depth of 50 millimetre manually including loading of dismantled material to transport vehicle at site excluding lead charges.

ITEM No. 5 :- Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimetre to 30 centimetre breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97 % of standard proctor density for a lead of 300 metre to 500 metre inclusive, from the site of excavation to the site of deposition as directed.

ITEM No. 6 :- Supplying hard murum / kankar at the road side, including conveying with all leads and stacking etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 7 :- Spreading hard murum/ soft murum/ gravel or kankar for side width complete.

ITEM No. 8 :- Compacting the hard murum side widths including laying in layers on each side with Vibratory roller including artificial watering etcetera complete.

ITEM No. 9 :- Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 - Plant Mix Method and Grading - II Material. (Material including all lead and lifts)

ITEM No. 10 :- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller to the required density. By Mechanical Means- Grading I (Using Screening Type A (13.2) millimetre Aggregate) (Material including all lead and lifts).

ITEM No. 11 :- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 millimetre) Aggregate (Material including all lead and lifts).

ITEM No. 12 :- Providing and constructing 75 millimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 grade at the rate of 2 Kilogram per Square Metre, spreading 12 millimetre size chips compacting with three wheel static roller having weight 8 to 10 Metric Tonne to achieve the desired degree of compaction as per Technical Specification Clause 506 etcetera complete including picking of existing Water Bound Macadam surface. (Material including all lead and lifts)

ITEM No. 13 :- Providing and constructing 50 millimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting), heating and spraying the bitumen of VG-30 @ 1.75 kilogram per Square metre, spreading 12 millimetre size chips compacting with Static roller having weight 8 to 10 MT to achieve the desired degree of compaction as per Technical Specification Clause 506 etcetera complete, including applying tack coat of bitumen VG-10 at the rate of 0.30 Kilogram per Square metre (on existing bitumen surface.) (Material including all lead and lifts)

ITEM No. 14 :- Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 Kilogram per 10 Square Metre, VG-30 bulk bitumen. (Material including all lead and lifts)

ITEM No. 15 :- BITUMINOUS MACADAM :- Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired compaction for 80 / 100 millimetre compacted thickness with Drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27: 2009 specified conditions and attachments such as electronic load sensor based belt conveyers, automatic synchronization of bitumen and aggregate fedder, built-in dust controller system and PLC for Drum Mix plant, Sensor paver, and Vibratory roller excluding prime / Tack coat etcetera complete. Bitumen 3.30 % of VG-30 bulk bitumen. (Material including all lead and lifts)

ITEM No. 16 :- Open Graded Premix Surfacing- Providing and Laying OGC 20 millimetre thickness composed of 13.2 millimetre to 5.6 millimetre aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of VG-30 grade - USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller (Over BT Surface). (Material including all lead and lifts)

ITEM No. 17 :- Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade preparing existing road surface, heating and applying bitumen at the rate of 0.98 Kilogram per square metre by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 Metric Tonne etcetera complete. (Material including all lead and lifts)

ITEM No. 18 :- Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils, by Mechanical Means.

ITEM No. 19 :- Excavation for catch / side water gutter in Hard Murum Strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils, by Mechanical Means.

ITEM No. 20 :- Excavation for catch / side water gutter in Soft Rock Strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils, by Mechanical Means.

ITEM No. 21 :- Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 metre, not less than 97 % of standard Proctor density after laying them in layers of 20 centimetre to 30 centimetre with vibratory roller.

ITEM No. 22 :- Providing soling using 80 millimetre size trap metal in 15 centimetre layer including filling voids with Crushed sand /grit, ramming, watering etcetera complete.

ITEM No. 23 :- Providing and laying in situ / ready mix / ready mix M-10 cement concrete of trap/ granite/ quartzite / gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural / artificial sand) (Material including all lead and lifts)

ITEM No. 24 :- Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 600 millimetre diameter in proper line, level and slope etcetera complete. (Material including all lead and lifts)

ITEM No. 25 :- Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 900 millimetre diameter in proper line, level and slope etcetera complete. (Material including all lead and lifts)

ITEM No. 26 :- Providing cast in situ / ready mix M-20 grade cement concrete for head walls of CD work / retaining walls etcetera including necessary form work, compaction, finishing and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with Natural / VSI standard Artificial Sand, cement 4.05 bags per cubic metre)

ITEM No. 27 :- Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 millimetre, cement content not to be less than 150 Kilogram per cubic metre, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etcetera complete. (Material including all lead and lifts)

ITEM No. 28 :- Providing and laying in-situ M-35 Grade unreinforced plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate (natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @ 0.6 metre X 0.6 metre centre to centre, admeasuring 80 millimetre at bottom and 40 millimetre at top with depth of 75 millimetre and maintaining the same throughout curing period by any other method approved by Engineer – in –charge, including dowel bars, tie bars and Polyethylene membrane.

ITEM No. 29 :- Cutting transverse contraction joints 3 to 4 millimetre wide and depth 60 millimetre in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etcetera complete including subsequent widening of the groove 8 to 10 millimetre wide at top having depth of 15 millimetre as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 30 :- Providing and laying in situ / ready mix M-20 cement concrete of trap / granite / quartzite / gneiss metal for approach slab including compacting, finishing, curing etcetera complete (excluding reinforcement) (with reversible drum type mixer/concrete batch mix plant (pan mixer) with SCADA with Natural/ VSI standard Artificial Sand, cement 5.90 bags per cubic metre)

ITEM No. 31 :- Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all reinforced cement concrete works as per detailed drawings etcetera complete. (Material including all lead and lifts)

ITEM No. 32 :- Providing and fixing of retro- reflectorised informatory sign board rectangular / Square in shape having area greater than 0.9 square meter made out of 2 millimetre aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive / heat activated adhesive reto-reflective specified back ground, border and back side reto-reflective symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25 millimetre X 25 millimetre X 3 millimetre, duly painted on back side with two coats of grey stove enamel paint and supported on two Number mild steel angle iron post 75 millimetre X 75 millimetre X 6 millimetre, 3.5 metre long firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45 centimetre X 45 centimetre X 60 centimetre, 60 centimetre below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 centimetre width including Galvanised Iron fixtures and transportation etcetera complete. The nut bolts of board with angle iron post / supporting structure after fixing at site has to be electrically welded. Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty.

ITEM No. 34 :- Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.50 millimetre thick including reflectorizing glass beads @ 250 grams per Square Metre area, thickness of 2.5 millimetre is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete. (Material including all lead and lifts)

ITEM No. 35 :- Providing and laying weep holes of 100 millimetre diameter PVC pipes as per drawing for abutment returns, return walls etcetera Complete. (Material including all lead and lifts)

ITEM No. 36 :- Providing and fixing Cautionary / Warning sign boards in Equilateral Triangle size of 750 millimetre made out of 2 millimetre aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive / heat activated adhesive retro-reflective specified back ground, border and back side retro-reflective symbols, letters, numerals, arrow as per IRC : 67-2012 Table No 8.3 Supported with back support frame 25 millimetre X 25 millimetre X 3 millimetre, duly painted on back side with grey stove enamel paint and supported on one number of Mild Steel angle iron post of size 65 millimetre X 65 millimetre X 6 millimetre, 3.45 metre long, duly painted with flat oil paint having alternate black and white bands of 25 centimetre width including G. I. fixtures etcetera; fixing the boards in M25 grade concrete block of size 60 centimetre X 60 centimetre X 75 centimetre including transportation etcetera complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor / convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor / supplier. (Material including all lead and lifts)

ITEM No. 37 :- Providing Reinforced Cement Concrete 5th Kilometre stones including painting, numbering, etcetera complete for National Highway and State Highway and Major District Road as per IRC design for Highway Kilometre stones and fixing in standard size Cement Concrete 1:4:8 block etcetera complete. (Material including all lead and lifts)

ITEM No. 38 :- Providing Reinforced Cement Concrete 1:2:4 ordinary Kilometre stones including painting, numbering, etcetera complete for National Highway and State Highway and Major District Road as per IRC design for Highway Kilometre stones and fixing in standard size Cement Concrete 1:4:8 block etcetera complete. (Material including all lead and lifts)

ITEM No. 39 :- Providing and fixing 200 metre stone as per IRC design including painting, numbering, fixing in 150 millimetre X 150 millimetre X 900 millimetre standard size cement concrete 1:4:8 block etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

ITEM No. 40 :- Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts etcetera

ITEM No. 41 :- Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etcetera complete.

ITEM No. 42 :- Dismantling the reinforced cement concrete Work 1:2:4 and sorting out the materials such as steel etcetera as directed and stacking them within the specified lead as directed etcetera complete.

ITEM No. 43 :- Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etcetera complete. (By Manual Means)

ITEM No. 44 :- Excavation for foundation in hard murum and boulders including shoring and strutting as necessary and disposing off excavated stuff as directed etcetera complete.

ITEM No. 45 :- Excavation for foundation in hard rock by blasting including shoring and strutting as necessary and disposing off excavated stuff as directed etcetera complete.

ITEM No. 46 :- Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthen bunds etcetera as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etcetera complete. (Prior approval of Superintending Engineer will be necessary)

ITEM No. 47 :- Providing and laying in situ / ready mix M-15 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in situ piers, abutment, returns, wings etcetera including provision of V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood / steel form work centering (excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etcetera complete as directed by engineer in charge, for height above 5.00 meter in following manners Height upto 5 metre (With Concrete Mixer) With fine aggregates of required specifications (Natural sand / VSI sand finely washed etcetera). (Material including all lead and lifts)

ITEM No. 48 :- Providing and filling annular space around footing in rock by using concrete of M-15 grade etcetera complete. (Material including all lead and lifts)

ITEM No. 49 :- Providing and laying in situ / ready mix controlled M-20 cement concrete of of trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary scaffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete (Excluding reinforcement) With reversible drum type mixer/ concrete batch mix plant (pan mixer). with Natural / VSI standard Artificial Sand (Material including all lead and lifts)

ITEM No. 50 :- Providing and laying in situ / ready mix M-20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etcetera complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with Natural / VSI standard Artificial Sand) (Material including all lead and lifts)

ITEM No. 51 :- Providing and laying in situ / ready mix M-30 controlled cement concrete of trap/ granite/ quartzite / gneiss metal for RCC work in solid / deck slab etcetera including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and with fine aggregates of required specifications (VSI sand finely washed etcetera) i) Height up to 5 metre, normal rate. (Material including all lead and lifts)

ITEM No. 52 :- Providing tar paper bearing including laying in proper position etcetera complete. (Material including all lead and lifts)

ITEM No. 53 :- Providing expansion joints with 25 millimetre thick bituminous pad as per detailed drawings etcetera complete. (Material including all lead and lifts)

ITEM No. 54 :- Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etcetera complete. (by granular material)

ITEM No. 56 :- Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etcetera complete. (Material including all lead and lifts)

ITEM No. 57 :- Providing railing of mild steel angle post 2.0 metre center to center of section 75 millimetre X 75 millimetre X 10 millimetre or equivalent I/C section of height 1.05 metre above bridge surface with minimum anchor length of 30 centimetre including hold fast of 25 millimetre diameter mild steel bar welded at the bottom and concreting of 1:3:6 of size 30 centimetre x 30 centimetre x 30 centimetre with three rows of 40 millimetre B class Galvanised Iron pipe provided at 30 centimetre on center to center including scaffolding and one coat of anticorrosive paint with two coats of oil painting, curing of concrete etcetera complete. (Material including all lead and lifts)

ITEM No. 58 :- Providing and laying in situ / ready mix M-20 CC of trap/ granite/quartzite/ gneiss metal for wearing course 8 centimetre thick including compacting, finishing, curing and filling in joints with bitumen etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with Natural / VSI standard Artificial Sand) (Material including all lead and lifts)

ITEM No. 59 :- Removing NP-2 and NP-3 class pipes including stacking at road side as directed by the Engineer in charge - Upto 900 millimetre diameter etcetera complete.

ITEM No. 60 :- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etcetera complete.

ITEM No. 61 :- Providing cast in situ / ready mix M-10 grade cement concrete for head walls of CD work / retaining walls etcetera including necessary form work, compaction, finishing and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with Natural / VSI standard Artificial Sand, cement 4.05 bags per cubic metre) (Material including all lead and lifts)

ITEM No. 62 :- Providing and casting in situ / ready mix PCC M-15 grade of trap metal for coping to head walls / parapet including centering, form work, compaction and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with Natural / VSI standard Artificial Sand) (Material including all lead and lifts)

M/s S.N. Khatib and Co.