Works at FWD Post

Amount

Dismantling CGI sheet roofing including ridges, hips, valleys and gutters etc and stacking the material within 50 metres lead.

Providing and fixing precoated galvanised iron profile Ssheets (size, shape and pitch of| corrugation as approved by Engineer-in-charge) 0.50 mm +0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both| side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches 2 while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size| (5.5x 55mm) with EPDM Sseal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm

Providing and fixing wind ties of 40x 6mm flat iron section

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead

Providing wood work in frames of doors, window, clerestory windows and other frames, 6 wrought, framed and fixed in position, Kiln seasoned and chemically treated hoollock /Local wood

Providing and fixing panelled or panelled and glazed shutters for doors, clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class local pine wood. 35 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed| shutters for doors, windows and clerestory windows ( Area of opening for panel inserts 8 excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled| and glazed shutters 25 mm to 40 mm thick First class local pine wood planks

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/sqm. (4 mm thick) glass panes including black enameled ISI marked M.S butt hinges with necessary screws. First class local Pine wood. 35 mm thick

Providing and fixing fly proof galvanised M.S. wire gauge shutters for doors, windows and clerestory windows using wire gauge with average width of apetre 1.4 mm in both directions with necessary screws including black enamelled ISI marked M.S butt hinges with necessary screws. First class local pine wood 35 mm thick

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer in- charge.Nominal concrete 1:3:6 mix.

25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4(1 cement: 4 coarse sand)

Providing wood work in frames of false ceiling portition etc. sawn and put up in position kiln seasoned and chemically treated hollock/ Local wood

Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured) as per Is: 14862 with suitable screws for fibre cement board in ceiling etc. Complete 6mm thick

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked, with one side decorative and other side balancing lamination Grade 1, Type Il exterior grade IS 5 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick

Providing and fixing wooden moulded beading to ceiling with iron screws plugs and ppriming coat on unexposed surface etc complete first Metre class local pine wood 35x10 mm

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:2:4 1 Cement: 2 coarse sand 4 graded stone aggregate 20 mm nominal size)

Providing and fixing ISI marked oxidised M.S. sliding door bolts black finish with nuts and Each Screws etc complete of size 250x16 mm.

Providing and fixing ISI marked oxidised M.S. tower bolts black finish, (Barrel type) with nuts and screws etc complete of size 250x10 mm.

Providing and fixing ISI marked oxidised M.S. tower bolts black finish, (Barrel type) with nuts and screws etc complete of size 150x10 mm.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 black finish, with nuts and screws etc complete of size 125 mm.

Providing and fixing aluminium casement stays, ISI marked, anodised transparent or dyed to required colour and shade, with necessary Screws etc complete.

Finishing wall with water proofing cement paint of required shade: New work (Two or more coats @3.84 Kg/10 sqm)

Applying priming coat With ready mixed pink or grey primer of Asian/Jonson & Nicolson brand and manufacture on wood work (hard and soft wood)

Applying a coat of water thinnable cement prmer of approved brand aand manufacturer on wall surface. Water thinnable cement primer

Painting with synthetic enamel paint Nerolac/Jenson & Nicolson/Asian (1st quality) to 27 give an even shade: two or more coats on new work

Providing and fixing Steel peg batten with 6 No steel pegs

Wiring for light point/fan point/ exhaust point/ call ball point with 1.5 sq. mm FR PVC insulated copper conducter single core cable in surface/ recessed (Polymer/Polyfit/Anchor/ISI), with piano type Switch (Anchor/CONA), phenolic laminated sheet, suitable size M.S. bOx and earthing the point with 1.5 Sqmm FR PVC insulated copper conducter (Plaza/Havell's/Anchor) etc as required. Group A

Wiring for circuit/sub main wiring along with earth wire with 2x1.5 sq mm + 1x1.5 sq mm earth wire FR PVC insulated copper conducter, single core cable in surface/ recessed 20 mm PVC conduit (Polymer/Polyfit/Anchor/1SI) as required. Wire should be of Plaza/Havell's/Anchor)

Wiring for circuit/sub main wiring along with earth wire with 2x10 sq mm+ 1x10 sq mm earth wire FR PVC insulated copper conducter, single core cable in surface recessed PVC conduit (Polymer/Polyfit/Anchor/IS|) as required. Wire should be of Plaza/Havell's/Anchor)

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, incuding P/ 6 pin 15/16 amps piano type socket outlet and 15/16 amps piano type Switch, connections etc as required

Supplying and fixing McB DB 8 Ways (Havell's) complete with connections,testing and commissioning etc as required.

Supplying and fixing double Pole 40 Amp, 240 volts, isolator (Havells) in the existing MCB DB 3" complete with connections, Commissioning etc as required.

Supplying and fixing 16 Amp rating, 240/415 volts (Havells), "C" curve, miniature circuit testing and breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required. Single pole

Supplying and fixing 18 watt LED batten fitting (Havell's/Philips/Bajaj) complete

M/s Midas Construction

JAPANI METO

J K ENTERPRISES