TTPS- ECHP-II- Loading of 300 mtrs. SH belt at Conveyor-65 with specification of 1800mm BW 5 ply, 5, 3, 1800KN N, Nylon Nylon and transported to Conveyor-48A B and erected in the conveyor 48A B for replacing the damaged belt.

Charges for Loading of SH Conveyor belt about 300 meters in belt drum from con 65 coal jetty -II to conveyor 48A & B tail end area transporting and unloading at conveyor take up area - including T&P hire charges and cost of consumables.

Charges for unloading counter weight from counter weight 30-40 ton capacity box arranging chain block and belt clamps, lifting counter weight box to the required level and after completion of belt joint work, releasing the counter weight box loading the counter weight in all conveyors. (For higher counter weight capacity and take-up tower height)

Charges for Assembling of 1st belt drum stand with necessary supports and stiffness providing at conveyor take up area and unloading the first drum in the stand.

Charges for Assembling of 2nd belt drum stand with necessary supports and stiffness providing at conveyor take up area and unloading the first drum in the stand.

Charges for Transporting the belt clamps, chain blocks and special tools and spanners to workspot and return back after completion of work.

Charges for Dismantling the fluid coupling end disc cuping springs by releasing all bolts & nuts in primary and secondary drives including T&P hire charges and cost of consumables.

Charges for Uncoiling the 2 belt drum 300 mtrs belt and laying the belt about 300 meters by using chain block & pull lift arrangements and pulling the belt through wire rope in step by step manner inspecting very wire rope sliding points and conveyor belts for 1800 mm width belt and including T&P hire charges and cost of consumables.

Charges for removing the carrying and return idlers with frames and refixing the same after completion of work and including T&P hire charges and cost of consumables.

Charges for making preliminary arrangements for providing 1st belt joint and assisting the belt joint works and other allied works and including T&P hire charges and cost of consumables.

Charges for Making preliminary arrangements for 2nd & 3rd & 4th belt joint and assisting the belt joint work and other allied works and including T&P hire charges and cost of consumables.

Charges for Arresting the belt after laying by using belt arresting clamps at 4 locations and allied Works.

Charges for Assembling the fluid coupling disc and cover with coupling springs and tightening all bolts and lubricating the springs and including T&P hire charges and cost of consumables.

Charges for Trail running the conveyor on no load and load condition to check the movement of counter weight, belt sway and carrying the belt tracking work including T&P hire charges and cost of consumables.

Charges for providing cold vulcanizing joint in 1800mm width conveyor belt including cost of vulcanizing materials hire charges for T&P'S cost of consumables etc complete.

S.GOPALA KRISHNAN CONTRACTOR (BID ID -1275330)