Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.4 LAccepted-Finance | L1 | Accepted-Finance Being Lowest Tenderer | |
| 2 | L2₹33.6 L+₹5.2 L (18.4%)Rejected-Finance B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance Being Other than Lowest Tenderer | |
| 3 | L3₹34.0 L+₹5.6 L (19.8%)Rejected-Finance | L3 | Rejected-Finance Being Other than Lowest Tenderer | |
| 4 | L4₹35.3 L+₹7.0 L (24.6%)Rejected-Finance | L4 | Rejected-Finance Being Other than Lowest Tenderer | |
| 5 | L5₹36.4 L+₹8.0 L (28.1%)Rejected-Finance 06 SACHIN SANTOSH DALVI G T HOSPITA CSMT MUMBAI MAHARASHTRA 400001 UDYAM MH 19 0135994 27ALQPD7257B1Z2 R M | MUMBAI | MAHARASHTRA | 400001 | L5 | Rejected-Finance Being Other than Lowest Tenderer |
| Sl No | Description | Qty | Unit | Sachin santosh dalvi L5 | saisiddhi construction L4 | Anil Industrial Corporation L2 | Pragathi Infrastructure Co. L7 | Bright Construction Co L9 | sri construction L8 | Prabhu associates L1 | SACHINENTERPRISES L6 | SR Construction L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M & L for preparation of old steel surfaces of cranes rail track n exc 15cm width or girth both side cleaning and removing loosely inherent material/paint using hand tools a wire brush/ scraper (confirming to SSPC SP-2 st2) or using a power tool such as a grinder (confirming to SSPC SP-2 st 3) and then washing it off with acetone or thinner (confirming to SSPC SP- 1) or any other water based liquid solvent to get cleaner surface for painting, coating, and then applying two coats of epoxy paint over one coat of red oxide complete all as specifed and directed. | 1,500 | RM | 90 ₹1,35,000 | 65 ₹97,500 | 77 ₹1,15,500 | 150 ₹2,25,000 | 145 ₹2,17,500 | 101 ₹1,51,500 | 50 ₹75,000 Lowest | 115 ₹1,72,500 | 50 ₹75,000 Lowest |
| 2.00 | M & L for preparation of old steel surfaces of cranes rail track exc 15cm width or girth both side cleaning and removing loosely inherent material/paint using hand tools a wire brush/ scraper (confirming to SSPC SP-2 st2) or using a power tool such as a grinder (confirming to SSPC SP-2 st 3) and then washing it off with acetone or thinner (confirming to SSPC SP- 1) or any other water based liquid solvent to get cleaner surface for painting, coating, and then applying two coats of epoxy paint over one coat of red oxide complete all as specifed and directed. | 3,400 | RM | 100 ₹3,40,000 | 75 ₹2,55,000 | 77 ₹2,61,800 | 180 ₹6,12,000 | 195 ₹6,63,000 | 101 ₹3,43,400 | 50 ₹1,70,000 Lowest | 115 ₹3,91,000 | 55 ₹1,87,000 |
| 3.00 | M&L for preparation of old steel/ concrete surfaces exc 10cm width of girth and applying two coats of epoxy paint over a coat of epoxy primer complete all as specifed and directed. | 200 | Sqm | 80 ₹16,000 | 90 ₹18,000 | 45 ₹9,000 Lowest | 80 ₹16,000 | 65 ₹13,000 | 191 ₹38,200 | 50 ₹10,000 | 115 ₹23,000 | 125 ₹25,000 |
| 4.00 | M & L for Cleaning of covered drains by using suitable device for removing blockage of line, mud, silt and other debris and removal of obtained spoils outside from MD land, including taking precautionary and safety measures etc complete all as spcified and directed. | 800 | Rm | 40 ₹32,000 | 35 ₹28,000 | 34 ₹27,200 Lowest | 100 ₹80,000 | 75 ₹60,000 | 50 ₹40,000 | 35 ₹28,000 | 85 ₹68,000 | 45 ₹36,000 |
| 5.00 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed | 40 | Qtl. | 20 ₹800 Lowest | 100 ₹4,000 | 156 ₹6,240 | 400 ₹16,000 | 300 ₹12,000 | 501 ₹20,040 | 125 ₹5,000 | 250 ₹10,000 | 150 ₹6,000 |
| 6.00 | Supply and fix structural steel framed works such as angle, channel etc. Confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with 1:2:4 type B0 (using 12.5mm graded stone aggregate) all as specified and directed. | 2,400 | Kg | 90 ₹2,16,000 | 80 ₹1,92,000 | 95 ₹2,28,000 | 90 ₹2,16,000 | 90 ₹2,16,000 | 99 ₹2,37,600 | 78 ₹1,87,200 Lowest | 105 ₹2,52,000 | 90 ₹2,16,000 |
| 7.00 | Supply and fix rolled mild steel section of Grade FE 410-W, (Gde- E-250) quality-A, as in Plates (Plane or Chequered) channels, square cut or noteched (ordinary and counter sunk) forming holes, without any attachment. | 800 | Kg | 87 ₹69,600 | 85 ₹68,000 | 96 ₹76,800 | 90 ₹72,000 | 90 ₹72,000 | 99 ₹79,200 | 78 ₹62,400 Lowest | 105 ₹84,000 | 90 ₹72,000 |
| 8.00 | Supply and fix mild steel as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 | 1,800 | Kg | 90 ₹1,62,000 | 80 ₹1,44,000 | 99 ₹1,78,200 | 90 ₹1,62,000 | 90 ₹1,62,000 | 99 ₹1,78,200 | 78 ₹1,40,400 Lowest | 108 ₹1,94,400 | 90 ₹1,62,000 |
| 9.00 | M&L for preparing new or previously untreated surface of steel of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. | 160 | Sqm | 60 ₹9,600 | 42 ₹6,720 | 43 ₹6,880 | 55 ₹8,800 | 75 ₹12,000 | 75 ₹12,000 | 20 ₹3,200 Lowest | 70 ₹11,200 | 50 ₹8,000 |
| 10.00 | Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided including debris removal of obtained outside from MD land complete all as specified and directed. | 6 | Cum | 50 ₹300 Lowest | 300 ₹1,800 | 888 ₹5,328 | 900 ₹5,400 | 301 ₹1,806 | 800 ₹4,800 | 250 ₹1,500 | 850 ₹5,100 | 450 ₹2,700 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
30 Aug 2025, 6:55 pmClosed
LT COL ANIL KUMAR S
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8212 MAINTENANCE OF CLEANING OF CRANES RAIL TRACK, BOTH SIDE DRAIN AND PAINTING, JETTIES AT ND UNDER AGE B/R-I UNDER GE (NW) KUNJALI
2025_MES_725470_1
8212/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹98,000
Yes
15 Sept 2025
11 Aug 2025
1 Sept 2025
18 Aug 2025
30 Aug 2025
23 Aug 2025
11 Aug 2025 - 18 Aug 2025
Amount
M & L for preparation of old steel surfaces of cranes rail track n exc 15cm width or girth both side cleaning and removing loosely inherent material/paint using hand tools a wire brush/ scraper (confirming to SSPC SP-2 st2) or using a power tool such as a grinder (confirming to SSPC SP-2 st 3) and then washing it off with acetone or thinner (confirming to SSPC SP- 1) or any other water based liquid solvent to get cleaner surface for painting, coating, and then applying two coats of epoxy paint over one coat of red oxide complete all as specifed and directed.
M & L for preparation of old steel surfaces of cranes rail track exc 15cm width or girth both side cleaning and removing loosely inherent material/paint using hand tools a wire brush/ scraper (confirming to SSPC SP-2 st2) or using a power tool such as a grinder (confirming to SSPC SP-2 st 3) and then washing it off with acetone or thinner (confirming to SSPC SP- 1) or any other water based liquid solvent to get cleaner surface for painting, coating, and then applying two coats of epoxy paint over one coat of red oxide complete all as specifed and directed.
M&L for preparation of old steel/ concrete surfaces exc 10cm width of girth and applying two coats of epoxy paint over a coat of epoxy primer complete all as specifed and directed.
M & L for Cleaning of covered drains by using suitable device for removing blockage of line, mud, silt and other debris and removal of obtained spoils outside from MD land, including taking precautionary and safety measures etc complete all as spcified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed
Supply and fix structural steel framed works such as angle, channel etc. Confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with 1:2:4 type B0 (using 12.5mm graded stone aggregate) all as specified and directed.
Supply and fix rolled mild steel section of Grade FE 410-W, (Gde- E-250) quality-A, as in Plates (Plane or Chequered) channels, square cut or noteched (ordinary and counter sunk) forming holes, without any attachment.
Supply and fix mild steel as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165
M&L for preparing new or previously untreated surface of steel of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided including debris removal of obtained outside from MD land complete all as specified and directed.
Precast RCC (1:2:4) type BI using 20mm graded crushed stone aggregate as in cover slabs and set in cement mortar 1:4, complete all as specified. (Reinforcement shall be measured and directed by Engineer-in-Charge.
M&L 10mm dia over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips etc complete all as specified and directed by Engr-in-charge.
-ditto- all as per item No 12 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
Demolition of cement concrete in ground floor and paving any thickness below or above ground level un re-inforced, including roof,including debris removal of obtained outside from MD land complete all as specified and directed. complete all as specified and directed
Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent aroung edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete/stone surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equavalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition and directed by Engineer-in-Charge.
M&L 100mm thick PCC 1:2:4 type B-I using 20mm graded crushed stone aggregates as in floor finished cement concrete surface even and smooth using extra cement complete all as specified and directed by Engineer-in-Charge.
M & L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof, floor complete all as specified and as directed.
M&L for rendering 15mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total cement concrete complete all as specified and as directed. Note : WPC will be measuerd separately.
Supply only integral water proofing compound
M&L for brushing neat cement slurry with 3Kg of cement per square metre all as specified and directed.
M & L for priming @ 0.8 Kg per Sqm of finished concrete surface complete and an evenly a coat of cold bituminous at 1 Kg per Sqm and applying seating cloth over cold bituminous , finaly paving bitumen of any penetration at 2.5Kg per Sqm all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supt-ports, overhangs, etc. Also splays between floors and beams, etc. rough finished surface of concrete.
Formwork to sides of pillars posts, struts, piers, columns and stanchions square, rectanguar or polygonal.
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of Jetties, wall, beam,coloum etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing ready mix polymer plaster and finally finishing the surface all as specified and directed.Make :- Dr.Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections will be measured and paid separately).
Dismentling of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed
M & L for machine pressed precast concrete interlocking paver block With Grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete over 25 mm thick Sand cushion all as specified and directed by EIC.
M&L in repair for Stainless steel decoravtive railings (grade 316), staircase3 (design and pattern as approved made out of SS pipes, SS flats, SS plates etc. Complete with and including necessary welding , buffing/polishing and fixing complete all as specified and directed.
M&L in repair for Stainless steel decoravtive railings chain alloy(grade 316), having 8 mm minimum thickness (design and pattern as approved ) as used to connect two stainless steel post with hooks etc. Complete with and including necessary welding , buffing /polishing and fixing complete all as specified and directed.
M&L for Preparation of floor PCC, interlocking tiles, chequered tiles, any floor tiles over a Two coat of indigo paints all as specified and directed.
M&L for applying 2mm thick thermoplastic paint in letter writing, Nos, line, Dashes, Arrow etc all as per manufacturer's instruction and all as specified and as directed.
Material & labour for cleaning the surface of the stone/concrete in jetty , dock,retaining wall, piers of jetty and bottom portion of deck slab etc above sea with mechanical grinder and specialized water misting techniques applying water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface complete and removing all sea vegetation complete all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Material and labour for applying one coat of solvent free Epoxy primer coat on oil/damp wall using with composition of UR Tech CG 2752 and UR Set CG 1054 in the ratio 100:60 Parts by weight Epoxy Primer to be homogeneous mixed, achieved by using a mechanical stirrer machine with agitator blades or alternatively a drill machine with a paddle stirrer. complete all as specified and directed. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Material and labour for applying two coats of anti carbonation paint DEKGUARD S of FOSROC or equivalent over vertical concrete surface in jetty/dry dock above sea level all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Anil Industrial Corporation (BID ID -3409084)
SR Construction (BID ID -3408470)
saisiddhi construction (BID ID -3407824)
Sachin santosh dalvi (BID ID -3406227)
SACHINENTERPRISES (BID ID -3408503)
Pragathi Infrastructure Co. (BID ID -3410991)
sri construction (BID ID -3410363)
Bright Construction Co (BID ID -3411486)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .