SPECIAL REPAIRS / RENOVATION TO KITCHEN, BATHROOM AND TOILETS IN TYPE - IV AND TYPE - V QUARTERS AT HVF ESTATE

Amount

Taking down door shutters with frame or cupboard shutter with frame exceeding 1.50 sq. m but not exceeding 4.00 sq. m each without taking shutter from the frame and handing over the same to CE(E)/Store.

Earth work excavation in hard/ dense soil in trenches width and depth not exceeding 1.50 m and getting out.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Material and Labour for forming jambs using CM 1:4 to openings including cutting, toothing and also facing, jointing and pointing to match existing work, complete.

Material and Labour for Dubbing out average 10 mm thick on irregular face of walls in CM 1:6.

Material and labour for providing a cement concrete layer average thickness 40 mm using B-0 type concrete 1:2:4 using (12.5 mm graded aggregate) and finishing the surface even and smooth without using extra cement.

Material and Labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:3

Material and Labour for plastering in CM 1:4, 15mm thick on fair faces of brick work and concrete surfaces.

Supply and fixing of EWC with "P" or "S" trap including bedding valveless syphonic action type 10 litres flushing cistern low level white with inlet ball valve float and handle including bracket Plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc., complete and dismantling the existing IWC.

Supply and Fixing of Health Facet chromium plated ("ESS YES VICTORIAN" Make).

Supply and Fixing of vitreous china Squatting pan pattern size 580 x 440 mm with "P" or "S" trap including provision of lime concrete beddig hinge level flushing cistern 10 litres flush out pipes etc., complete and dismantling existing IWC complete.

Supply and Fixing of Colored Non Skid Ceramic tiles not less than 7mm thick (Square /rectangular)area of each tile exceeding 0.18 Sq m but not exceeding 0.38 Sq m in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and screed bed or bedding layer in CM1:3, 20mm thick for laying floor finishes.

Material and Labour for glazed ceramic colour tiles in vertical surfaces 350x250x7 / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed in CM 1:4 15mm thick complete.

Supply and Fixing of vitreous china wash basin 580x450 including pillar cock 15mm di waste chain and plug 32 mm dia and porcelian stopper and removal of old one from the site.

Supply and fixing of cast copper alloy screwed down, high pressure stop cock /angle cock fancy type chromium plated concealed type of size 15mm.

Supply and Fixing of chromium plated cast copper alloy bib cock of size 15mm.

Supply and fixing of PVC(SWR) pipe 110mm bend.

Supply and fixing of PVC(SWR) pipe 75mm bend.

Supply and Fixing of PVC(SWR) pipe of 110mm dia laid in trenches including or in walls including all fittings complete asll as directed.

Supply and Fixing of PVC(SWR) pipe of 110mm dia laid in trenches including or in floors including all fittings complete asll as directed.

S & F of PVC floor trap 75mm dia outlet of with grating and connecting PVC extension pipe including jointing with solvent cement etc., complete

Supply and fixing of tubular towel rail 20mm dia, D type, 60cm long of aluminium anodized with and including chromium coated brass screws and wooden /plastic cleats.

Supply and fixing of soap dish fixed to plugs with chromium plated brass screws.

Supply and Fixing of Swivel Shower of PTMT of any colour for fixing with 15mm pipe (minimum weight 40 gms)

Supply and Fixing of PVC (SWR) gully trap 125/110 mm, setting and jointing with neat cement solvent.

M & L for Cutting chases, pinning in., making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Supplying and Laying of CPVC 20mm outer dia pipes SD 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S & F of 20mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

Supply and Fixing of Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as directed by EIC.

Supply and Fixing of stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as directed by EIC.

Supply and Fixing of PVC door frame of size 50mmx95mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube.

S & F of Factory made solid panel PVC Door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S.frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S.frame welded / sealed to stiles & rails with suitable PVC sheet beading and joined together and including fixing to frame with hinges, tower bolt, handle all complete and as directed.

Supply and Fixing of extruded Aluminium alloy with brass/bronze hinge pin type C-22 Butt hinges heavy weight 75mm length.

Supply a nd Fixing of Aluminium anodized skeleton tower bolts with plate of 100mm length.

Supply and Fixing of Aluminium handle fabricated type 100mm length.

Supply and Fixing of Aluminium Coat Hooks of soild body of size 175mm to250mm.

Supply and Fixing of granite (of any colour) work (table rubbed and polished) 25mm thick to fixing on wash basin platform including machine cutting suitably to fix the wash basin including nosing of inner and outer edges complete as directed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture with shade of granite.

S & F of PVC 75mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floors.

Material and Labour for white washing on ceiling with two coats including preparation of old ceiling surfaces.

Complete removal of existing lime wash from the walls using scrappers emery paper etc and washing the surface with water for removal of dust and applying two coats of OBD over one coat of alkali resistant primer paint.

Material and Labour for providing /repairs to the cupboards in kitchen using 18mm thick water proof plywood BWP type fixed with necessary clamps, screws and required lippings, beadings etc all complete as directed by EIC.

Supply and Fixing of Plywood 12mm thick of grade BWP type BB fixed with screws to timer frame work as directed by EIC

Supply and Fixing of extruded Aluminium alloy with brass/bronze hinge pin type C-22 Butt hinges heavy weight 75mm length.

Supply and Fixing of Aluminium anodized skeleton tower bolts with plate of 100mm length.

Supply and Fixing of Aluminium handle fabricated type 100mm length.

M & L for painting to wooden surfaces of any description over 10cm width or girth with Two coats of synthetic enamel paint. Including preparing new wooden surfaces.

Providing and fixing factory made uPVG white color sliding window three track made of extruded profiles with wll thickness of 2.3 mm (±0.2mm). Window profile with hollow section with multi chamber. Frames (88mmx52mm), sliding sash(42mmx67mm). Sliding Interlock (One vertical length in each shutter) (45.5mmx28mm) Glazing bead (24.5mmx16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arranagement for fixing hardware. EPDM gasket , 1.2 ±0.2mm thick galvanized steel frame (30mmx18mm) 2 nos, sliding sash (30mmx18mm) Sliding mesh sash(26mmx10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mmx100mm long fastners, Hardware Touch Lock of Zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by the contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose (a) Area not exceeding 2.00 sq.m each and as approved and as directed.

Supply and Fixing of sheet Glass 5.50mm, Quality and glazing with oil putty in square exc 0.5 Sq.m in each pane ground or obscured or tinted on one side and as approved and as directed by EIC.

Supply and Fixing of stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture size 1.40mm and fixed with stainless steel wire staples all complete as directed by EIC.

Material and labour for Point wiring with 1.5sqmm FRLS PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall/ roof/L angle including M.S. switch box concealed in the wall (made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG/1.5 sqmm, bare/stranded copper earth continuity wire. (make: Finolux / Havells / Polycab / Kundan) a)One light point or one fan point controlled by one switch with cables 1.5 sq.mm size.

Material and labour for Point wiring with 1.5sqmm FRLS PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall/ roof/L angle including M.S. switch box concealed in the wall (made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG/1.5 sqmm, bare/stranded copper earth continuity wire. (make: Finolux / Havells / Polycab / Kundan) b)One 3 pin plug socket with switches flush type 5A on same board with 2.5sqmm size cable.

Material and labour for Point wiring with 1.5sqmm FRLS PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall/ roof/L angle including M.S. switch box concealed in the wall (made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG/1.5 sqmm, bare/stranded copper earth continuity wire. (make: Finolux / Havells / Polycab / Kundan) c)One 3 pin plug socket with switches flush type 5A on Independent board with 2.5sqmm size cable.

Supply & fixing of switch piano, flush type single pole one way 6 amps. (ANCHOR / LEGRAND/ HAVELLS make).

Supply & fixing of switch piano, flush type single pole one way 16 amps. (ANCHOR / LEGRAND/ HAVELLS make).

Supply & fixing of Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type (ANCHOR / LEGRAND/ HAVELLS make).

Supply & fixing of Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal. (ANCHOR / LEGRAND/ HAVELLS make).

Supply & fixing of Switch socket combination 2 in 1, 6 A flush type. (ANCHOR / LEGRAND/ HAVELLS make).

Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor with 2 mm thick PVC conduit accessories, single core cable in surface/recessed as required in PVC conduit. (make: Finolux / Havells / Polycab / Kundan) a) 2x2.5 sqmm + 1x2.5 sqmm earth wire

Material & Labour for Ceiling rose, 3 Phase/PVC/polycorbonate, isolated body (ANCHOR / LEGRAND/ HAVELLS make).

Supply & Fixing of lamp holders PVC/polycorbonate type with cord grid cap suitable for pendant/straight/slanting fittings. (ANCHOR / LEGRAND/ HAVELLS make).

Material and Labour for Brick walls Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth

Taking down copper/aluminium point wiring (light,fan,socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fitting, exhaust fan etc removing materials to store for keeping in safe custody.

SRI LAKSHMI INDUSTRIES