Construction of KGVB (Type-II) Building at Diyung Valley EBB in Dima Hasao

Amount

CIVIL & INTERIOR WORKS EARTH WORK Earthworkinexcavationbymechanicalmeans(Hydraulicexcavator)/manualmeansoverareas(exceeding30cmindepth,1.5minwidthaswellas10sqmonplan)includinggettingoutanddisposalofexcavatedearthleadupto50mand lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Fillingavailableexcavatedearth(excludingrock)intrenches,plinth,sidesoffoundationsetc.inlayersnotexceeding20cmindepth,consolidatingEachdepositedlayerbyramming and watering, lead up to 50 m and lift upto 1.5 m

Excavating,supplyingandfillingoflocalearth(includingroyalty)bymechanicaltransportuptoaleadof5kmalsoincludingrammingandwateringoftheearthinlayersnotexceeding20cmintrenches,plinth,sidesoffoundationetc.complete.

PLAIN CEMENT CONCRETE WORKS Providingandlayingdamp-proofcourse40mmthickwithcement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate (12.5mm nominal size).

Providingandlayinginpositioncementconcreteofspecifiedgradeexcludingthecostofcenteringandshuttering -All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

1:4:8(1Cement:4coarsesand(zone-III)derivedfromnaturalsources:8gradedstoneaggregate40mmnominalsize derived from natural sources)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

REINFORCED CEMENT CONCRETE WORKS Providing and laying in position specified grade of reinforced cementconcrete,excludingthecostofcentering,shuttering,finishingandreinforcement-Allworkuptoplinth level : 1:1.5:3(1cement:1.5coarsesand(zone-III):3gradedstone aggregate 20 mm nominal size)

1:2:4(1cement:2coarsesand(zone-III)derivedfromnaturalsources:4gradedstoneaggregate20mmnominalsize derived from natural sources)

Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshavingslopeupto15°landings,balconies,shelves,chajjas,lintels,bands,plainwindowsills,staircasesandspiralstaircasesaboveplinthleveluptofloorfivelevel,excludingthecostofcentering,shuttering,finishingandreinforcementwith1:1.5:3(1cement:1.5coarsesand(zone-III):3gradedstoneaggregate20mmnominalsize).

Providingandlayinginpositionreadymixedorsitebatcheddesignmixcementconcreteforreinforcedcementconcretework;usingcoarseaggregateandfineaggregatederivedfromnaturalsourcesandusingrecycledconcreteaggregate(RCA)ascoarseaggregateandfineaggregatewithinpermissibleutilizationof20%each,PortlandPozzolana/OrdinaryPortland/PortlandSlagcement,admixturesinrecommendedproportionsasperIS:9103toaccelerate/retardsettingofconcrete,toimprovedurabilityandworkabilitywithoutimpairingstrength;includingpumpingof concrete to site of laying, curing, carriage for all leads; but excludingthecostofcentering,shuttering,finishingandreinforcementasperdirectionoftheengineer-in-charge;for the following grades of concrete.Note:Extracementupto10%oftheminimumspecifiedcementcontentindesignmixshallbepayableseparately.Incasethecementcontentindesignmixismorethan110%ofthespecifiedminimumcementcontent,thecontractorshallhavediscretiontoeither re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cementcontent of 330 kg /cum

All works above plinth level up to floor V level Concrete of M25 grade with minimum cementcontent of 330 kg /cum

FORMWORK Centeringandshutteringincludingstrutting,proppingetc.and removal of form work for : Foundations,footings,basesofcolumns,etc.formassconcrete

Suspendedfloors,roofs,landings,balconiesandaccessplatform

Lintels,beams,plinthbeams,girders,bressumersandcantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiral-staircases

MASONRY WORK BrickworkwithcommonburntclayF.P.S.(nonmodular)bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement mortar 1:6 (1 cement : 6 coarse sand)

HalfbrickmasonrywithcommonburntclayF.P.S.(nonmodular)bricksofclassdesignation7.5infoundationsandplinth in : Cement mortar 1:4 (1 cement : 4 coarse sand)

HalfbrickmasonrywithcommonburntclayF.P.S.(nonmodular)bricksofclassdesignation7.5insuperstructureabove plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

STONE WORK (CLADDING & FLOORING) Providingandfixing18mmthickgangsawcut,mirrorpolished,premouldedandprepolished,machinecutforkitchenplatforms,vanitycounters,windowsills,faciasandsimilarlocationsofrequiredsize,approvedshade,colourandtexturelaidover20mmthickbasecementmortar1:4(1cement:4coarsesand),jointstreatedwithwhitecement,mixedwithmatchingpigment,epoxytouchups,includingrubbing,curing,mouldingandpolishingtoedgesto give high gloss finish etc. complete at all levels. Granitestoneslabcolourblack,Cherry/Rubyred.Areaofslab over 0.50 sqm

Providingedgemouldingto18mmthickmarblestonecounters,Vanitiesetc.,includingmachinepolishingtoedgetogivehighglossfinishetc.completeasperdesignapproved by Engineer-in-Charge Granite work

Extraforfixingmarble/granitestone,overandabovecorrespondingbasicitem,infaciaanddropsofwidthupto150mmwithepoxyresinbasedadhesive,includingcleaningetc. complete.

ProvidingandfixingIstqualityceramicglazedwalltilesconformingtoIS:15622(thicknesstobespecifiedbythemanufacturer),ofapprovedmake,inallcolours,shadesexceptburgundy,bottlegreen,blackofanysizeasapprovedbyEngineer-in-Charge,inskirting,risersofstepsanddados,over12mmthickbedofcementmortar1:3(1cement:3coarsesand)[email protected],includingpointinginwhitecementmixedwithpigment of matching shade complete.

WOOD AND ALLUMINIUM WORK Providingwoodworkinframesofdoors,windows,clerestorywindowsandotherframes,wroughtframedandfixedinpositionwithholdfastlugsorwithdashfastenersofrequireddia&length(holdfastlugsordashfastenershallbe paid for separately) Second class teak wood

ProvidingandfixingISImarkedflushdoorshuttersconformingtoIS:2202(PartI)decorativetype,coreofblockboardconstructionwithframeof1stclasshardwoodand well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35mmthickincludingISImarkedStainlessSteelbutthingeswith necessary screws

Extraforprovidinglippingwith2ndclassteakwoodbattens25mmminimumdepthonalledgesofflushdoorshutters(over all area of door shutter to be measured).

Extraforcuttingrebateinflushdoorshutters(Totalareaofthe shutter to be measured).

Providingandfixingwoodenmouldedbeadingtodoorandwindowframeswithironscrews,plugsandprimingcoatonunexposed surface etc. complete : 2nd class teak wood 50 x 20 mm

Providing40x5mmflatironholdfast40cmlongincludingfixingtoframewith10mmdiameterbolts,nutsandwoodenplugsandembeddingincementconcreteblock30x10x15cm1:3:6mix(1cement:3coarsesand:6gradedstone aggregate 20mm nominal size)

ProvidingandfixingISImarkedoxidisedM.S.slidingdoorbolts with nuts and screws etc. complete : 300x16 mm

Providingandfixingchromiumplatedbrasshandleswithnecessary screws etc. complete: 125 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screwsetc. complete : 300x16 mm

Providingandfixingaluminiumhangingfloordoorstopper,ISImarked,anodised(anodiccoatingnotlessthangradeAC10asperIS:1868)transparentordyedtorequiredcolourandshade,withnecessaryscrewsetc.complete.Twinrubber stopper

Providingandfixingaluminiumworkfordoors,windows,ventilatorsandpartitionswithextrudedbuiltupstandardtubularsections/appropriateZsectionsandothersectionsofapprovedmakeconformingtoIS:733andIS:1285,fixingwithdashfastenersofrequireddiaandsize,includingnecessaryfillingupthegapsatjunctions,i.e.attop,bottomandsideswithrequiredEPDMrubber/neoprenegasketetc.Aluminiumsectionsshallbesmooth,rustfree,straight,mitredandjointedmechanicallywhereverrequiredincludingcleatangle,Aluminiumsnapbeadingforglazing/paneling,C.P.brass/stainlesssteelscrews,allmpleteasperarchitecturaldrawingsandthedirectionsofEngineer-in-charge.(Glazing,panelinganddashfastenerstobepaidforseparately) : Forshuttersofdoors,windows&ventilatorsincludingprovidingandfixinghinges/pivotsandmakingprovisionforfixingoffittingswhereverrequiredincludingthecostofEPDM rubber / neoprene gasket required (Fittingsshall be paid for separately) Anodisedaluminium(anodisedtransparentordyedtorequiredshadeccordingtoIS:1868,Minimumanodiccoating of grade AC 15)

Providingandfixingglazinginaluminiumdoor,window,ventilatorshuttersandpartitionsetc.withEPDMrubber/neoprenegasketetc.completeasperthearchitecturaldrawingsandthedirectionsofengineer-in-charge.Costofaluminium snap beading shall be paid in basic item): Withfloatglasspanesof4.0mmthickness(weightnotlessthan 10kg/sqm)

STEEL WORK Steelworkweldedinbuiltupsections/framedwork,includingcutting,hoisting,fixinginpositionandapplyingaprimingcoatofapprovedsteelprimerusingstructuralsteeletc. as required. Ingratings,frames,guardbar,ladder,railings,brackets,gates and similar works

Providingandfixingstainlesssteel(Grade304)railingmadeofHollowtubes,channels,platesetc.,includingwelding,grinding,buffing,polishingandmakingcurvature(whereverrequired)andfittingthesamewithnecessarystainlesssteelnutsandboltscomplete,i/cfixingtherailingwithnecessaryaccessories&stainlesssteeldashfasteners,stainlesssteelboltsetc.,ofrequiredsize,onthetopofthefloororthesideofwaistslabwithsuitablearrangementasperapprovalofEngineer-incharge,(forpaymentpurposeonlyweightofstainlesssteelmembersshallbeconsideredexcludingfixingaccessories such as nuts, bolts, fasteners etc.)

SteelreinforcementforR.C.C.workincludingstraightening,cutting,bending,placinginpositionandbindingallcomplete upto plinth level. Thermo-MechanicallyTreatedbarsofgradeFe-500Dormore.

SteelreinforcementforR.C.C.workincludingstraightening,cutting,bending,placinginpositionandbindingallcomplete above plinth level. Thermo-MechanicallyTreatedbarsofgradeFe-500Dormore.

FLOORING Providingandlayingvitrifiedfloortilesindifferentsizes(thicknesstobespecifiedbythemanufacturer)withwaterabsorptionlessthan0.08%andconformingtoIS:15622,ofapprovedmake,inallcoloursandshades,laidon20mmthickcementmortar1:4(1cement:4coarsesand),[email protected]/sqmincludinggroutingthejointswithwhitecementandmatchingpigmentsetc.,complete. Size of Tile 600x600 mm

ProvidingandlayingVitrifiedtilesinfloorindifferentsizes(thicknesstobespecifiedbythemanufacturer)withwaterabsorptionlessthan0.08%andconformingtoIS:15622,ofapprovedbrand&manufacturer,inallcoloursandshade,laidon20mmthickcementmortar1:4(1cement:4coarsesand)[email protected]/sqmincludinggroutingthejointswithwhitecementandmatchingpigmentsetc.Thetilesmustbecutwiththezerochippingdiamondcutteronly.Layingoftileswillbedonewiththenotchtrowel,plier,wedge,clipsofrequiredthickness,levelingsystemandrubbermalletforplacingthetiles ently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

CEILING Providingandfixingfalseceilingatallheightincludingprovidingandfixingofframeworkmadeofspecialsections,powerpressedfromM.S.sheetsandgalvanizedwithzinccoatingof120gms/sqm(bothsideinclusive)asperIS:277andconsistingofanglecleatsofsize25mmwidex1.6mmthickwithflangesof27mmand37mm,at1200mmcentretocentre,oneflangefixedtotheceilingwithdashfastener12.5mmdiax50mmlongwith6mmdiabolts,otherflangeofcleatfixedtotheanglehangersof25x10x0.50mmofrequiredlengthwithnuts&boltsofrequiredsizeandotherendofanglehangerfixedwithintermediateG.I.channels45x15x0.9mmrunningatthespacingof1200mmcentretocentre,towhichtheceilingsection0.5mmthickbottomwedgeof80mmwithtaperedflangesof26mmeachhavinglipsof10.5mm,at450mmcentretocentre,shallbefixedinadirectionperpendiculartoG.I.intermediatechannelwithconnectingclipsmadeoutof2.64mmdiax230mmlongG.I.wireateveryjunction,includingfixingperimeterchannels0.5mmthick27mmhighhavingflangesof20mmand30mmlong,theperimeterofceilingfixedtowall/partitionwiththehelpofrawlplugsat450mmcentre,with25mmlongdrywallscrews@230mminterval,includingfixingofgypsumboardtoceilingsectionandperimeterchannelwiththehelpofdrywallscrewsofsize3.5x25mmat230mmc/c,includingjointingandfinishingtoaflushfinishoftaperedandsquareedgesoftheboardwithrecommendedjointingcompound,jointingtapes,finishingwithjointingcompoundin3layerscoveringupto150mmonbothsidesofjointandtwocoatsofprimersuitableforboard,allaspermanufacturer'sspecificationandalsoincludingthecostofmakingopeningsforlightfittings,grills,diffusers,cutoutsmadewithframeofperimeterchannelssuitablyfixed,allcompleteasperdrawings,specificationanddirectionoftheEngineerinCharge but excluding the cost of painting with : 12.5mmthicktaperededgegypsumplainboardconformingtoIS:2095- (Part I) :2011 (Board with BIS certification marks)

12.5mmthicktaperededgegypsummoistureresistantboard

FINISHES 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

15mmcementplasterontheroughsideofsingleorhalfbrick wall of mix. 1:4 (1 cement: 4 fine sand).

Applying Priming Coat Withreadymixedredoxidezincchromateprimerofapprovedbrandandmanufactureonsteelgalvanisediron/steel works

Paintingwithsyntheticenamelpaintofapprovedbrandandmanufacture of required colour to give an even shade : Twoormorecoatsonnewworkoveranundercoatofsuitableshadewithordinarypaintofapprovedbrandandmanufacture

Providing and applying white cement based putty of average thickness1mm,ofapprovedbrandandmanufacturer.Quoteforeachlayerovertheplasteredwallsurfacetoprepare the surface even and smooth complete.

Distemperingwithoilboundwashabledistemperofapproved brand and manufacture to give an even shade : Newwork(twoormorecoats)overandincludingwaterthinnable priming coat with cement primer

FinishingwallswithPremiumAcrylicSmoothexteriorpaintwith Silicone additives of required shade: Newwork([email protected]/10sqmoverandincludingprimingcoatofexteriorprimerapplied@ 2.20 kg/10 sqm)

White washing with lime to give an even shade : New work (three or more coats)

ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,havingthermalstabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsThisincludesjointingofpipes&fittingswithonestepCPVCsolventcement,trenching,refilling&testingofjointscomplete as per direction of Engineer in Charge. 100 mm nominal dia Pipes

MANHOLE COVER Providingandfixinginpositionpre-castR.C.C.manholecover and frame of required shape and approved quality L D- 2.5 Circular shape 450 mm internal diameter

ROOFING WORK ProvidingcorrugatedG.S.sheetroofingincludingvertical/curvedsurfacefixedwithpolymercoatedJorLhooks,boltsandnuts8mmdiameterwithbitumenandG.I.limpetwashersorwithG.I.limpetwashersfilledwithwhitelead,includingacoatofapprovedsteelprimerandtwocoatsofapprovedpaintonoverlappingofsheetscomplete(uptoanypitchinhorizontal/verticalorcurvedsurfaces),excludingthecostofpurlins,raftersandtrussesandincluding cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m²

0.63 mm thick with zinc coating not less than 275 gm/ m²

Providingvalleysof90cmwideoverallinplainG.S.sheetfixedwithpolymercoatedJorLhooks,boltsandnuts8mmdia G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350 gm/m²

Providingvalleysof90cmwideoverallinplainG.S.sheetfixedwithpolymercoatedJorLhooks,boltsandnuts8mmdia G.I. limpet and bitumen washers complete. Providingandfixingprecoatedgalvanisedsteelsheetroofingaccessories0.50mm(+0.05%)totalcoatedthickness,Zinccoating120gramspersqmasperIS:277,in240mpasteelgrade,5-7micronsepoxyprimeronbothsideofthesheetandpolyestertopcoat15-18micronsusingselfdrilling/ self tapping screws complete: Barge board (Upto 300 mm)

WATERPROOFING ProvidingandlayingwaterproofingtreatmentinsunkenportionofWCs,bathroometc.,byapplyingcementslurrymixedwithwaterproofingcementcompoundconsistingofapplying : (a)[email protected]/[email protected]/sqm.This layer will be allowed to air cure for 4 hours. (b)[email protected]/[email protected]/sqm.Thislayerwillbeallowedtoaircurefor4hoursfollowedwith water curing for 48 hours. (Therateincludespreparationofsurface,treatmentandsealingofalljoints,corners,junctionsofpipesandmasonrywith polymer mixed slurry.)

Providingandlayingintegralcementbasedwaterproofingtreatmentincludingpreparationofsurfaceasrequiredfortreatmentofroofs,balconies,terracesetcconsistingoffollowing operations: (a)Applyingaslurrycoatofneatcementusing2.75kg/sqmofcementadmixedwithwaterproofingcompoundconformingtoIS.2645andapprovedbyEngineer-in-chargeovertheRCCslabincludingadjoiningwallsupto300mmheight including cleaning the surface before treatment. (b)Layingbrickbatswithmortarusingbrokenbricks/brickbats25mmto115mmsizewith50%ofcementmortar1:5(1cement:5coarsesand)admixedwithwaterproofingcompoundconformingtoIS:2645andapprovedbyEngineerin-chargeover20mmthicklayerofcementmortarofmix1:5(1cement:5coarsesand)admixedwithwaterproofingcompoundconformingtoIS:2645andapprovedbyEngineerin-chargetorequiredslopeandtreatingsimilarlytheadjoiningwallsupto300mmheightincludingrounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cementslurryusing2.75kg/sqmofcementadmixedwithwaterproofingcompoundconformingtoIS:2645andapproved by Engineer-in-charge. (d)Finishingthesurfacewith20mmthickjointlesscementmortarofmix1:4(1cement:4coarsesand)admixedwithwaterproofingcompoundconformingtoIS:2645andapprovedbyEngineer-in-chargeincludinglayingglassfibreclothofapprovedqualityintoplayerofplasterandfinallyfinishingthesurfacewithtrowelwithneatcementslurryand making pattern of 300x300 mm square 3 mm deep. (e)Thewholeterracesofinishedshallbefloodedwithwaterforaminimumperiodoftwoweeksforcuringandforfinaltest.“Allaboveoperationstobedoneinorderandasdirected and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimumthickness at khurra as 65 mm.

Constructingsoakpit1.20x1.20x1.20mfilledwithbrickbatsincludingS.W.drainpipe100mmdiameterand1.20mlongcomplete as per standard design.

INTERNAL SANITARY WORKS ProvidingandfixingvitreouschinadualpurposeclosetsuitableforuseassquattingpanorEuropeantypewatercloset(WesternW.Cpan)withseat&lidfixedwithC.P.brasshingesandrubberbuffers,10litrelowlevelflushingcisternwithfittingandbrackets,40mmflushbend,20mmoverflowpipe,withspecialsofstandardmakeandmosquitoproofcouplingofapprovedmunicipaldesigncomplete,includingpaintingoffittingsandbrackets,cuttingand making good the walls and floors wherever required:WhitevitreouschinadualpurposeWCpanwithwhitesolidplasticseatandlidwithwhitevitreouschinaflushingcisternand C.P. flush bend.

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern

ProvidingandfixingwashbasinwithC.I.brackets,15mmC.P.brasspillartaps,32mmC.P.brasswasteofstandardpattern,includingpaintingoffittingsandbrackets,cuttingandmakinggoodthewallswhereverrequire:WhiteVitreousChinaWashbasinsize630x450mmwithasingle15 mm C.P. brass pillar tap.

Providing and fixing toilet paper holder C.P. brass

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1metrelongwithS.S.triangularplatetoEureopeantypeW.C.ofqualityandmakeasapprovedbyEngineer-in-charge.

ProvidingandfixingStainlessSteelAISI304(18/8)kitchensinkasperIS:13983withC.I.bracketsandstainlesssteelplug40mm,includingpaintingoffittingsandbrackets,cuttingandmakinggoodthewallswhereverrequired: Kitchensinkwithdrainboard.510x1040mmbowldepth250mm.

ProvidingandfixingunplasticisedP.V.C.connectionpipewithPTMTNuts,collarandbushofapprovedqualityandcolour.15 mm nominal bore with 45 cm length.

ProvidingandfixingC.P.brasslongnosebibcockofapprovedqualityconformingtoISstandardsandweighingnot less than 810 gms.15 mm nominal bore

ProvidingandfixingC.P.brassstopcock(concealed)ofstandarddesignandofapprovedmakeconformingtoIS:8931.15 mm nominal bore

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Providingandfixing600x450mmbevelededgemirrorofsuperiorglass(ofapprovedquality)completewith6mmthickhardboardgroundfixedtowoodencleatswithC.P.brass screws and washers complete.

ProvidingandfixingPTMTliquidsoapcontainer109mmwide,125mmhighand112mmdistancefromwallofstandardshapewithbracketofthesamematerialswithsnapfittingsofapprovedqualityandcolour,weighingnotless than 105 gms.

ProvidingandfixingPTMTtowelringtrapezoidalshape215mmlong,200mmwidewithminimumdistancesof37mmfromwallfacewithconcealedfittingsarrangementofapproved quality and colour,weighing not less than 88 gms.

ProvidingandfixingPTMTBottleTrapforWashbasinandsink.Bottletrap31mmsinglepiecemouldedwithheightof270mm,effectivelengthoftailpipe260mmfromthecentreofthewastecoupling,77mmbreadthwith25mmminimum water seal, weighing not less than 260 gms

ProvidingandfixingPTMTgratingofapprovedqualityandcolour.18.58.1 Circular type18.58.1.1 100 mm nominal dia

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work PN - 10 Pipe, 110 mm OD (SDR-11)

PN - 10 Pipe, 90 mm OD (SDR-11)

PN - 10 Pipe, 75 mm OD (SDR-11)

PN - 10 Pipe, 63 mm OD (SDR-11)

PN - 10 Pipe, 50 mm OD (SDR-11)

PN - 16 Pipe, 40 mm OD (SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Exposed on walls PN - 16 Pipe, 32mm OD (SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. PN - 16 Pipe, 20mm OD (SDR-7.4)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

ProvidingandfixingonwallfaceunplasticisedRigidPVCrainwaterpipesconformingtoIS:13592TypeA,includingjointingwithsealringconformingtoIS:5382,leaving10mm gap for thermal expansion,(i) Single socketed pipes. 75 mm diameter

Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion.Bend 87.5° 75 mm bend

Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion.Shoe Plain 75 mm shoe

DEEP TUBEWELL Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia

Supplying,assembling,loweringandfixinginverticalpositioninborewell,unplasticizedPVCmediumwellcasing(CM)pipeofrequireddia,conformingtoIS:12818,includingrequiredhireandlabourcharges,fittings&accessoriesetc.allcomplete,foralldepths,asperdirectionof Engineer -in-charge. 100 mm nominal size dia

150 mm nominal size dia

ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,havingthermalstabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsThisincludesjointingofpipes&fittingswithonestepCPVCsolventcement,trenching,refilling&testingofjointscompleteasperdirectionofEngineerinCharge.(SUCTIONPIPE) External work 40 mm nominal outer dia Pipes

Providingandplacinginpositionfiltersof40mmdiameterG.I./ PVC pipe with brass strainer of approved quality.

Providingandfixinggunmetalnon-returnvalveofapproved quality (screwed end) : 40 mm nominal bore Horizontal

Vertical

DevelopmentoftubewellinaccordancewithIS:2800(partI)andIS:11189,toestablishmaximumrateofusablewateryieldwithoutsandcontent(beyondpermissiblelimit),withrequiredcapacityaircompressor,runningthecompressorforrequiredtimetillwellisfullydeveloped,measuringyieldofwellby“V”notchmethodoranyotherapprovedmethod,measuringstaticlevel&drawdownetc.bystepdrawdownmethod,collectingwatersamples&gettingtestedinapprovedlaboratory,i/cdisinfectionoftubewell,allcomplete,includinghire&labourchargesofaircompressor,tools&accessoriesetc.,allasperrequirementand direction of Engineer-in-charge.

Providingandfixingsuitablesizethreadedmildsteelcaporspotweldedplatetothetopofborewellhousing/casingpipe,removableasperrequirement,allcompleteforborewell of: 100 mm dia

150 mm dia

ProvidingandfixingM.S.clampofrequireddiatothetopofcasing/housingpipeoftubewellasperIS:2800(partI),including necessary bolts & nuts of required size complete.

ProvidingandfixingBailplug/Bottomplugofrequireddiato the 100 mm dia

150 mm dia.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET 3 (Three Phase) with steel cable rope and submersible cable complete as directed and specified by the deptt. Three phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 1 HP STAGE 5 to 18 with MCB controlled Submersible motor pump set control panel.

Supplying including installation, connection as approved by the Deptt., testing and commissioning of JET PUMP SET (HORIZONTAL) complete as directed and specified by the deptt. 1 HP single Phase jet pump set (Horizontal(Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .

INTERNAL ELECTRICAL WORKS Wiringforlightpoint/fanpoint/exhaustfanpoint/callbellpointwith1.5sq.mmFRLSPVCinsulatedcopperconductorsinglecorecableinsurface/recessedmediumclassPVCconduit,withmodularswitch,modularplate,suitableGIboxandearthingthepointwith1.5sq.mmFRLSPVCinsulatedcopper conductor single core cable etc. as required. Group B

Wiringfortwincontrollightpointwith1.5sq.mmFRLSPVCinsulatedcopperconductorsinglecorecableinsurface/recessedmediumclassPVCconduit,2waymodularswitch,modularplate,suitableGIboxandearthingthepointwith1.5sq.mmFRLSPVCinsulatedcopperconductorsinglecorecable etc. as required.

Wiringforcircuit/submainwiringalongwithearthwirewiththe following sizes of FRLS PVC insulated copper conductor, 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplyinganddrawingco-axialTVcableRG-6grade,0.7mmsolidcopperconductorPEinsulated,shieldedwithfinetinnedcopperbraidandprotectedwithPVCsheathintheexisting surface/ recessed steel/ PVC conduit as required

Supplyingandfixingmetalboxoffollowingsizes(nominalsize)onsurfaceorinrecesswithsuitablesizeofphenoliclaminatedsheetcoverinfrontincludingpaintingetc.asrequired. 100mmx100mmx60mm deep

Supplyingandfixingfollowingmodularswitch/socketontheexistingmodularplate&switchboxincludingconnections but excluding modular plate etc. as required 5/6 A switch

2 way 5/6 A switch

15/16 A switch

3 pin 5/6 A socket

6 pin15/16 A socket

TV antenna socket outlet

Bell push

Supplyingandfixingtwomodulesteppedtypeelectronicfanregulatorontheexistingmodularplateswitchboxincludingconnectionsbutexcludingmodularplateetc.asrequired

Supplyingandfixingmodularblankingplateontheexistingmodularplate&switchboxexcludingmodularplateasrequired

Supplyingandfixingfollowingsize/modules,GIboxalongwithmodularbase&coverplateformodularswitchesin recess etc. as required 3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm

SupplyingandfixingfollowingModularbase&coverplateon existing modular metal boxes etc. as required. 3 Module

4 Module

6 Module

8 Module

12 Module

SupplyingandfixingsuitablesizeGIboxwithmodularplateandcoverinfrontonsurfaceorinrecess,includingprovidingandfixing3pin5/6Amodularsocketoutletand5/6 A modular switch, connections etc. as required

SupplyingandfixingsuitablesizeGIboxwithmodularplateandcoverinfrontonsurfaceorinrecess,includingprovidingandfixing6pin5/6&15/16Amodularsocketoutletand15/16Amodularswitch,connectionsetc.asrequired.

Supplyingandfixingbrassbatten/angleholderincludingconnection etc. as required.

Installation testing and comissioning of prewired, flouriscent fitting/compactflouriscentfittingofalltypes,completewithaccessoriesandtube/lampdirectlyonceiling/wallincludingconnectionwith1.5sq.mmFRLSPVCinsulated,copperconductor single core cable and earthing etc as required

Installationtestingandcomissioningofceilingfan,includingwiringthedownrodsofstandardlength30cmwith1.5sq.mmFRLSPVCinsulated,copperconductor,singlecorecable as required.

Installationofexhaustfanintheexistingopening,includingmakinggoodthedamages,connection,testingandcommissining etc. as required. 450 mm sweep

Supplyingandfixingfollowingway,singlepoleandneutral,sheetsteel,MCBdistributionboard,240V,onsurface/recess,completewithtinnedcopperbusbar,neutralbusbar,earthbar,dinbar,interconnections,powderpaintedincludingearthingetc.asrequired.(ButwithoutMCB/RCCB/Isolator) 12 way , Double door

Supplyingandfixingoffollowingwayssurface/recessmounting,verticaltype,415V,TPNMCBdistributionboardofsheetsteel,dustprotected,dulypowderpainted,inclusiveof200Atinnedcopperbusbar,commonneutrallink,earthbar,dinbarformountingMCBs(butwithoutMCBsandincomer)asrequired.(Note:VerticaltypeMCBTPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Supplyingandfixing5Ato32Arating,240/415V,10kA,"C"curve,miniaturecircuitbreakersuitableforinductiveloadoffollowingpolesintheexistingMCBDBcompletewithconnections,testingandcommissioningetc.asrequired. Single pole

Double pole

Supplyingandfixingfollowingrating,doublepole,(singlephaseandneutral),240V,residualcurrentcircuitbreaker(RCCB),havingasensitivitycurrent30mAintheexistingMCBDBcompletewithconnections,testingandcommissioning etc. as required. 40A

Supplyingandfixingfollowingrating,fourpole,(threephaseandneutral),415volts,residualcurrentcircuitbreaker(RCCB),havingasensitivitycurrent30mAintheexistingMCBDBcompletewithconnections,testingandcommissioning etc. as required. 63A

Supplyingandfixing20amps,240volts,SPNindustrialtype,socketoutlet,with2poleandearth,metalenclosedplugtopalongwith20amps"C"curve,SP,MCB,insheetsteelenclosure,onsurfaceorinrecess,withchainedmetalcoverforthesocketoutletandcompletewithconnections,testing and commissioning etc. as required.

EarthingwithG.I.earthpipe4.5metrelong,40mmdiaincludingaccessories,andprovidingmasonryenclosurewithcoverplatehavinglockingarrangementandwateringpipeetc. with charcoal/ coke and salt as required.

EarthingwithG.I.earthplate600mmX600mmX6mmthickincludingaccessories,andprovidingmasonryenclosurewithcoverplatehavinglockingarrangementandwateringpipeof2.7metrelongetc.withcharcoal/cokeandsalt as required.

Supplyingandlaying6SWGG.I.wireat0.50metrebelowgroundlevelforconductorearthelectrode,includingconnection/ termination with GI thimble etc. as required.

Providingandfixingoflightningconductorfinial,madeof25mmdia300mmlong,G.I.tube,havingsingleprongattop,with85mmdia6mmthickG.I.baseplateincludingholesetc. complete as required.

LayingofonenumberPVCinsulatedandPVCsheathed/XLPEpowercableof1.1KVgradeoffollowingsizedirectingroundincludingexcavation,sandcushioning,protectivecovering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm

SupplyingandmakingendterminationwithbrasscompressionglandandaluminiumlugsforfollowingsizeofPVCinsulatedandPVCsheathed/XLPEaluminiumconductor cable of 1.1 KV grade as required. 3½ X 70 sq. mm (38mm)

SupplyingandmakingoutdoorendterminationwithcastresincompoundincludingaluminiumlugsandotherjointingmaterialsforfollowingsizeofPVCinsulatedandPVCsheathed/XLPEaluminiumconductorcableof1.1KVgradeas required. 3½ X 70 sq. mm

Installation,testingandcommissioningofprewiredfluorescentfittingcompactfluorescentfittingofalltypescompletewithallaccesssoriesandtube/lampetc.directlyonceiling/wall,includingconnectionwith1.5sqmmFRLSPVCinsulated,copperconductor,singlecorecableandearthing etc as required.

Installation,testingandcommissioningofceilingfan,includingwiringthedownrodsofstandardlength(upto30cm)with1.5sqmmFRLSPVCinsulated,copperconductor,singlecorecableandearthingincludingprovidingandfixingphenoliclaminatedsheetcoveronthefanboxetc.asrequired.

Numberingofceilingfan/exhaustfan/fluorescentfittingasrequired.

Installationofexhaustfanintheexistingopening,includingmakinggoodthedamages,connection,testingandcommissining etc. as required. Upto 450mm sweep.

Providing,layingandfixingfollowingdiaG.I.pipe(mediumclass)ingroundcompletewithG.I.fittingsincludingtrenching (75 cm deep)and re-filling etc as required 80 mm dia

ProvidingandfixingfollowingcapacityTP&NdisconnectorfuseswitchunitinsidetheexistingpanelboardwithISImarkedHRCfusesincludingdrillingholesincubiclepanel,making connections, etc. as required. 63 Amp TP&N

ProvidingandfixingfollowingratingandbreakingcapacityandpoleMCCBinexistingcubiclepanelboardincludingdrillingholesincubiclepanel,makingconnections,etc.asrequired. 160 Amp, 16 KA, TP MCCB

SupplyingoffollowingsizesXLPEinsulatedandPVCsheathedaluminiumconductorarmouredpowercableof650/1100VgradeconformingtoIS7098(Part-I)/1988with amendment up to date etc as required. 3 1/2 Corex 70 sqmm aluminium

EXTERNAL ELECTRIFICATION Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 120 sq. mm

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 250 Amp, 25 KA, TPMCCB

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63 Amp TP&N

supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 sq. mm

Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 95 sq. mm

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 95 sq. mm

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 metre and upto 12.00 metre

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and erection of 30 A aerial fuse complete as required.

Erection of aerial fuse as required.

Supplying and fixing MV horn gap lightning arrestor as required.

Fixing of MV lightning arrestor as required.

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required.

Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (75 mm X 90 mm),G. I. bolts, nuts and washers, coach screws etc. as required.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Erection of disc/ pin insulator for 11 KV over head lines as required.

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.

Supplying, installation testing and commissioning of the 100KVA Aluminium wound indoor / out door type transformer complete including the payment to be made to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines as ammended up to date upto 200 KVA star rating up to 5 star, above 200KVA as per CEA guidelines for losses along with LV enclosure.

Supplying of following sizes XLPE insulated,insulation screening with extruded semi conducting compound in combination with copper tape cores laid up inner sheath of PVC tape,galvanised flat steel strip armoured and overall PVC sheathed cable confirming to IS7098(Part-II) 1985 with latest amendments . 3Cx95sqmm HT.

Supplying of following sizes GI pole confirming to IS: 2713. 12 Mtr(SP-66)

Supplying and drawing of 11KV overhead high tension line through Racoon conductor on the existing pole struture with necessary binder, pin, cross arm etc. as required complete.

Supplying including installation, testing and commissioning of 62.5 KVA Air/Water Cooled Diesel Generator set coupled to suitable alternator of 220/415 V, AC, 1/3-Phase 0.8 p.f.(la mounted on a 1) M.S. Fabricated base frame.,2) M.S. fuel tank of required capacity.,3) Residual Silencer.,4) Standard Control Panel.5) Suitable batteries with lead.,5) First fill of lube oil.,6) Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the Technical Specification.. as per manufacturer.

Payment of load security to the local APDCL authority.

SITE DEVELOPMENT Surfacedressingofthegroundincludingremovingvegetationandinequalitiesnotexceeding15cmdeepanddisposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of Soil

Excavating,supplyingandfillingoflocalearth(includingroyalty)bymechanicaltransportuptoaleadof5kmalsoincludingrammingandwateringoftheearthinlayersnotexceeding20cmintrenches,plinth,sidesoffoundationetc.complete

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .

Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

BOUNDARY WALL Earthworkinexcavationbymechanicalmeans(Hydraulicexcavator)/manualmeansoverareas(exceeding30cmindepth,1.5minwidthaswellas10sqmonplan)includinggettingoutanddisposalofexcavatedearthleadupto50mand lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Fillingavailableexcavatedearth(excludingrock)intrenches,plinth,sidesoffoundationsetc.inlayersnotexceeding20cmindepth,consolidatingEachdepositedlayerbyramming and watering, lead up to 50 m and lift upto 1.5 m.

CEMENT CONCRETE WORKS Providingandlayinginpositioncementconcreteofspecifiedgradeexcludingthecostofcenteringandshuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providingandlayingdamp-proofcourse40mmthickwithcement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate (12.5mm nominal size).

Providing and laying in position specified grade of reinforced cementconcrete,excludingthecostofcentering,shuttering,finishingandreinforcement-Allworkuptoplinth level : 1:1.5:3(1cement:1.5coarsesand(zone-III):3gradedstone aggregate 20 mm nominal size)

Reinforcedcementconcreteworkinwalls(anythickness),includingattachedpilasters,buttresses,plinthandstringcourses,fillets,columns,pillars,piers,abutments,postsandstrutsetc.aboveplinthleveluptofloorfivelevel,excludingcost of centering, shuttering, finishing and reinforcement : 1:1.5:3(1cement:1.5coarsesand(zone-III):3gradedstone aggregate 20 mm nominal size)

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

TIMBER SHUTTERING (FORMWORK) Centeringandshutteringincludingstrutting,proppingetc.and removal of form for Foundations, footings, bases of columns,etc. for mass concrete

Lintels,beams,plinthbeams,girders,bressumersandcantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

MASONRY WORKS BrickworkwithcommonburntclayF.P.S.(nonmodular)bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

HalfBrickmasonarywithcommonburntclayF.P.S.(nonmodular)bricksofclassdesignation7.5insuperstructureabove plinth level up to floor level V Cement mortar 1:3 (1 cement : 3 coarse sand)

PLASTERING WORKS 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

PAINTING Providing and applying white cement based putty of average thickness1mm,ofapprovedbrandandmanufacturer,overtheplasteredwallsurfacetopreparethesurfaceevenandsmooth complete.

FinishingwallswithAcrylicSmoothexteriorpaintofrequired shade: Newwork([email protected]/10sqmoverandincludingprimingcoatofexteriorprimerapplied@ 2.20 kg/10 sqm).

REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

IRON & STEEL WORK: Steelworkinbuiltuptubular(round,squareorrectangularhollowtubesetc.)trussesetc.,includingcutting,hoisting,fixinginpositionandapplyingaprimingcoatofapprovedsteelprimer,includingweldingandboltedwithspecialshaped washers etc. complete. Electric resistance or induction butt welded tubes

Ceiling fan

L.E.D Lights

Exhaust fan

Sri Peheisang Raimme