REPAIR OF WALL PLASTER FLOORING TILING, SEEPAGE JOINERY AND SANITARY AND OTHER ALLIED WORKS IN OTM ACCN IN 75 MED REGT, 194 MED REGT, HQ 9 ARTY BDE AND 633 SATA BTY (OLD LOC) UNDER AGE B/R-I OF GE (NORTH) MEERUT CANTT.

Amount

Demolition of brick work or rubbled stone masonry including all quoins arches, pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

M&L Brick work with fly ash old size, sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

All as per Srl item No 2.00 here-in-before but except bricks complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick using ready mix plaster bags in cement mortar 1:4 on brick / concrete surfaces of external walls finished even and fair, using water proofing compound @ 200ml per 50 Kg weight of cement onsumed or as per manufacturer instructions complete all as specified and directed

M&L rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L Preparation of new plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm)using roller for painting complete all as specified and directed.

M&L Preparation of new plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

M&L Preparation of new plastered surface of ceiling and applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with one coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for complete removal of existing treatment by mechanical means with mechanical scrubber / vacuum cleaner etc complete all as specified and directed.

M&L for applying one coat of primer using roller complete all as specified and directed.

M&L for applying two coat of Oil bound distemper using roller for painting complete all as specified and directed

M&L preparation of old plaster / un-plastered surfaces of wall inluding Complete removal of existing treatment and applying 3mm thick wall care putty for making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm)using roller for painting complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise complete all as specified and directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

M&L 75mm thick PCC 1:4:8 type D2(40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for chequered cement concrete colour tiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L Plain Cement concrete Type B-0, 1:2:4 (12.50mm graded aggregate), 25 mm thick as in floors / paving complete all as specified and directed.

M&L Hardcore of gauge exceeding 63mm but not exceeding 100 mm, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC colored interlocking paver block molded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L Non skid colored ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or colored cement to match the color / shade of tiel laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed".

M&L for light shade, vitrified tiles, 7to8mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tiles laid and over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for light shade, vitrified tiles, 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm as on vertical surface such as skirting/dado, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tiles and laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic colored tiles of size 350X250X7mm/450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or colored cement to match the colour of tiles laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exceeding 1.5 Sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down shutters of any description exceeding 1 but not exceeding 2 Sqm each, including builders hard ware fittings complete all as specified and directed.

S&F 35mm thick, second class HW in glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass, etc. size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F anodized aluminium frame for doors , windows, ventilators with one or more rebates with and including weight of joining cleat for fixing etc complete all as specified and directed

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining aluminium cleats, aluminium glazing clips, ruber neoprene packing suitable size of aluminium, handles of size 150mm 2 Nos in each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes / other filling material in panels, screws etc complete all as specified and directed. Note:- Glass panes / other filling materials in panels shall be measured and paid separately.

S&F powder coated anodized aluminium windows sliding type (3 shutter type) fitted with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) including stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodized fittings such as hinges, handles including powder coated anodized aluminium frame, grill with one or more rebates including supplying & fixing of 5.50 mm thick black glass complete all as specified and directed.

S&F 4mm thick black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, supplying & fixing in the frame at site as per specification & drawing of SSR Part-II complete all as specified and directed.

S&F aluminium anodized barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F butt hinges made of medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodized of size 100 mm complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and directed.

M&L in repair 18/19mm thick Solid WPC board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to WPC frame work in cup boards, rebated or flat edged fancy handle , Magnate lock complete all as specified and directed.

S&F in repair Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open ) 40 mm. complete all as specified and directed.

S&F in repair hasp & staples 125mm in size, safety type aluminium anodised fixed with screws complete all as specified and directed.

M&L for 18 to 20mm thick black granite stone slab machine cut as in skirting / dados, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L for rounding to edges of stone slabs two edge full round, such as in steps, cooking platform and other similar situation complete all as specified and directed.

S&F in repair mortise lock made of brass, four lever, vertical type of size 75mm complete all as specified and directed.

M&L in repair Solid PVC Wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC Frame with 5mm pvc fillets as per specified and drawing shown as per page of SSR part II . complete all as specified and directed.

S&F in repair aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F Galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

Dismantling of wall and ceiling board (fiber,pulp,insulation etc) or insulation boards / slab / blankets any thickness including cover fillets and removal from the site complete all as specified and directed.

S&F Tee grid suspension system of size 600 mm x600 mm type-1 made out of rolled framed hot dipped galvanised steel zinc coated of not less than 120 gm/Sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thick of section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyester coated in off white/white in colour complete with material, fixing, jointing etc all as per manufactures instructions and directed.

S&F fiber cement colored textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions and as directed complete all as specified and directed.

Dismantling of old water tank exc 250 Ltrs & n.exc 500 Ltrs capacity and Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity complete all as specified and directed.

Dismantling of old water tank exc 500 Ltrs & n.exc 1000 Ltrs capacity and Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity complete all as specified and directed.

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms complete all as specified and directed.

S&F in repairs gun metal globe or gate valves, 15mm bore dia, with iron wheel head, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed to walls and ceilings or laid in floors including taking down old water tubing complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe including taking down old water tubing complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe including taking down old water tubing complete all as specified and directed.

M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. including 32mm dia waste pipe with CP waste coupling pvc connection ,bracket etc complete all as specified and directed.

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90gms) complete all as specified and directed.

S&F in repair stop/angle valve of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90gms) complete all as specified and directed.

S&F in repair bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.

S&F in repair angular valve, 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup(concealed type) screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repair pillar tap 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair PVC waste pipe for 32/ 40mm bore pipe, 800mm long complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F in repair Plastic water closet seat cover black / White closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

S&F in repair CP Soap dish any type fixed to plugs with chromium plated brass screws and complete all as specified and directed

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges and complete all as specified and directed

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long and complete all as specified and directed .

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair Brass chromium plated shower rose 125mm size complete in all respect complete all as specified and directed.

S&F in repair PVC grating 100mm dia with waste pipe hole fixed to floor trap and complete all as specified and directed.

Dismantling of cast iron PVC or reinforced concrete drain pipes 75/110/150/200 mm dia jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repair toilet paper holder with flat recessed type stainless steel as per sample kept in the office of AGE B/R-I complete all as specified and directed

Dismantling AC sheet corrugated or semi corrugated sheet of any description as in roof and including removal from the site complete all as specified and directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

S&F in repairs stainless steel fancy type curtain rod 25mm dia with bracket complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic 1:3 complete all as specified and as directed.

M&L for laying 25mm thick PCC 1:2:4 type B-O, (using 12.5mm graded crushed stone aggregates) as in floor / paving to receive topping layer complete all as specified and directed.

Taking down old existing water proofing treatment from top of RCC/arch slab including taking down of concrete padding or plaster and raking out joints of arch slab and hacking the top of RCC slab, cleaning with water and dispose off rubbish upto 200 meter complete all as specified and directed

M&L cement concrete 1:2:4 type B-O (using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.

M&L 10mm thick cement paster in cement mortar 1:4 mixed with water proofing compound @ 200ml per 50 Kg weight of cement or as per manufacturers instructions, finised even and smooth without using extra cement on roof surface when concrete is green and wall complete all as specified and directed. Note :- Water proofing compound consumed shall be measured and paid separately under "Supply only" item of this Schedule complete all as specified and directed.

Cutting grooves in brick/ concrete wall 75 mm wide and 65 mm deep and shaping horizontal face of groove and making good disturbed surface in cement mortar 1:3 after inserting APP membrane (Chasing shall be cut where height of parapet wall is more than 300mm.) complete all as specified & directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for water proofing treatment to existing non-accessible roof slabs by providing and applying one coat of bituminous/polymerized primer confirming to IS-3384 @ 0.30 Ltr/Sqm and applying of one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm and laying of acetic polypropylene (APP) modified membrane pre-fabricated, reinforced with non-woven polyester of 3.50Kg/Sqm (minimum), 3mm thick (minimum), with minimum 75mm side overlaps and 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane complete complete all as specified and as directed.

M&L 20 to 25 mm thick machine cut kota stone slabs of size 540 mm x 540 to 560mmx 560mm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade / matrix of existing surface laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 104.00 here-in-before but as on vertical surfaces such as skirting / dados laid over and Including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F in repairs Vitreous China urinal bowl, flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe) complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) not exceeding 0.5 Sqm from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs washers and waster including beading in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and directed.

S&F in repair for Kitchen plate rack made of stainless steel 1 mm wall thickness with plugs washers as overall size of 75cm x 75 cm including fixing to wall and all accessories complete all as specified and directed.

ATHARV CONSTRUCTION

VIRAT CONSTRUCTIONS

Manglam Engineers and Construction Co

B.K.construction

SA construction co.