Dhandheri, Hansi1, Const. of Park (HGVY) (RT)

Amount

NS items

MULTY GYM SIX STATION( Leg Pull ,Leg Curl with Leg Extension ,Bicecp with Tricep,Pec Dec Fly): consist of 4 weigheted statio and 2 Light station :and it is combination of 8 ype Excercises etc.

HEAVY DUMBBLL STAND/RACK IN DOUBLE PLATFORM:- made up of mainly Olympic retangular pipe of 4`x2` approx.: more nearest to 209x81x83cm with 2.15 mm thickness etc. with angle iron welded wih flat patti with rubber pastd on which Dumbbell serstonit,two plat form / shelves.

SEATED CHEST PRESSED :- DIMENSIONS : 170X120X166 FRAME STRUCTURE : over -sized internal frame tubing of high tensile strength steel,gracefully curved contineous welded ,factory assembled weight frame. Name of Tube:- Oval Tubing Tube size:- 122mmx 58mm weight stack:- 80 kgs

CYCLE:- Adjustable Height and comfortable seat wit cushions to prevent back-aches and music stiffness. 8 Adjustable rsistance level and tension controller knob. material-Alloy steel . 6 months warrent .Sixe(lxbxh)- (4x24x46) inches Dual action Mode -stationary and Moving Handles both . Full Body workout -Arms,Calves and chest. Belt based resistance mechanism allow better momentum based recovery and better pedalling technique etc.

Air Swing: Providing designing and fixing air swing in pair of size 1150 x 900 x 1250 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational

Pull Chair:- Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

3. Twister :-Providing, designing and fixing Twister of size 1700 X1300 X 1300 mm fabricated 2`x4` rectangular hollow MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zine primer paint to be applied at all welding points prior to finishing. Handlebars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer- in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE: caps for user safety. The equipment tobe fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

5. SEE Saw :- Product type Playing Material Mild steel Size 6 Feet Age group up to 12 Seating 2 seater All Joint shall be lubricated made by reputed company and powder coated using Akzo or equipment of 80-120 micron thick. All welding joints of pipe are well welded with jointed scalloped a necessary and dressed off welded with joints scalloped a necessary and dressed off removing sharp edge and burrsto be approved by Engineer in charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPWE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cove nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer in Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Abb Trainer / Sit up Brench Main post- 114mm pipe sze - 2`x4` thickness of Pipe - 3mm Pipe Standard : GP Post caps: Aluminium/LLDPE Screw otheer - Nylon Lock Bolt Material: Mild Steel Holding capacity: 120 kg Age Group: 13 plus

Heavy Olympic weight plates stan rack in tree shape

Bidder Name

Amount

M/S R K CONCRETE UDYOG (GSTN-06AMWPK1241K2ZR) BID ID -1252912

The Hansi Adarsh Umra Gat Co Op Society Ltd. (GSTN-NA) BID ID -1251392

SURENDER KUMAR CONTRACTOR (GSTN-06CELPK3094P1ZT) BID ID -1252533

SHUBHAM CONSTRUCTION CO. (GSTN-NA) BID ID -1251789

THE SUMIT COOPERATIVE LABOUR AND CONSTRUCTION SOCIETY LTD BARWALA (GSTN-NA) BID ID -1252636

M/S R K CONCRETE UDYOG (BID ID -1252912)

SHUBHAM CONSTRUCTION CO. (BID ID -1251789)

THE SUMIT COOPERATIVE LABOUR AND CONSTRUCTION SOCIETY LTD BARWALA (BID ID -1252636)

The Hansi Adarsh Umra Gat Co Op Society Ltd. (BID ID -1251392)

THE SUMIT COOPERATIVE LABOUR AND CONSTRUCTION SOCIETY LTD BARWALA (BID ID -1252636)

M/S R K CONCRETE UDYOG (BID ID -1252912)

The Hansi Adarsh Umra Gat Co Op Society Ltd. (BID ID -1251392)

SHUBHAM CONSTRUCTION CO. (BID ID -1251789)