Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹2.3 LAdmitted-Finance | -8.02% | ₹2.3 L | L1 | Admitted-Finance |
| 2 | L2₹2.3 LAdmitted-Finance | -7.60% | ₹2.3 L | L2 | Admitted-Finance |
Updated dates
Tender Value
₹2.5 L
EMD Value
₹4,960
Closing Date
15 May 2026, 5:00 pmClosed
EE PWD Elec Dn Ajmer
EE PWD Elec Dn Ajmer
Repair and Maintenance of Transformer and Cable work at MG Hospital Bhilwara
2026_CEPWD_556012_6
NIT 02 2026-27 EE PWD Elec Dn Ajmer
Open Tender
Electrical Works
60 days
Bhilwara
Refer NIT
4 documents required · 4 mandatory
₹500
EGRAS Challan EE PWD Elec Dn Ajmer 7820
₹4,960
Yes
EE PWD Elec Dn Ajmer
26 May 2026
4 May 2026
15 May 2026
4 May 2026
15 May 2026
4 May 2026
12 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing & Laying XLPE insulated & P.V.C. sheathed Armoured Aluminium cable confirming to IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing commissioning etc. as required of following size. | |||||
| 1.1 | 240.0 Sq. mm | - | - | - | - |
| 1.2 | 3.5 core | 45 | Mtr | 1,523 | ₹68,535 |
| 2Supplying and making end termination with heavy aluminium lugs ( Pin / ring type ) confirming to IS 8309 -1993 duly crimped with crimping tool, PVC tape etc of following size. | |||||
| 2.1 | 240.0 Sq.mm | 8 | Each | 62 | ₹496 |
| 3S & Making Heat shrinkable type Tubular sleeve version outdoor straight through joint for following size of PVC/ XLPE insulated aluminium conductor cable of 1.1 KV grade as required. | |||||
| 3.1 | 3/3.5/4 x 185.0 sq.mm-300 sq.mm | 2 | Set | 9,110 | ₹18,220 |
| 4 | Replacement of existing transformer oil confirming to IS: 335 after removing of old oil and remove from site (old oil shall be retained by the contractor) | 200 | Liter | 120 | ₹24,000 |
| 5 | Charges for Testing of transformer oil for its viscosity and dielectric strength including collection of sample from top and bottom of the existing transformer tank and submission of test report complete with all T & P , labour etc as required . | 2 | Job | 2,222 | ₹4,444 |
| 6 | Charges for Collection , Filtration and dehydration of existing transformer oil with the help of high vaccum filtration machine and cleaning of core-coil assembly by hot oil for removal of sludge / dust particles etc. as required. | 200 | P.Ltr | 16.5 | ₹3,300 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.82 MB
Tendernotice_2.pdf
PDF • 23.83 MB
Tendernotice_3.pdf
PDF • 4.91 MB
Tendernotice_4.pdf
PDF • 1.76 MB
BOQ_990253.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid