DEVELOPMENT OF ENTRIES AT AJMER AND CHITTORGARH ROAD AT BHILWARA CITY

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils

Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. indepth, consolidating each deposited layer by ramming andwatering including lead up to 50 meter and with all lift

Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. Good soil of earth

Random rubble dry stone Kharanja under floor.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying inposition cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering-All work upto plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removalof formwork for foundation , footings, strap beam, raft , bases of columns etc.

Walls (any thickness) including attached pilasters, buttresses plinth and string course.

Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars

Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:4 ( 1-Cement : 4-Sand).

Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for paving specification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement)

M-50 100mm thick to be used in heavy-traffic ( Heavy traffic is defined as a daily traffic of 450-1500 commercial vehicles exceeding 30 KN laden weight, or an equivalent of 2.0 to 5.0 MSA for a design life of 20 years.) like Bus terminals, industrial complexes, mandi houses roads on expansive soils, factory floor , service station, industrial pavements.etc.

M-30, 60 mm thick to be used in non traffic areas like building premises, monument premises, land scapes, public gardens/ park, domestic drives, paths and patios Embankment slopes, sand stabilization Area etc.( As per table 1 of IS 15658:2006 Category A Denated units to key into each other on four faces

Add extra over rates of item No. 11.38, A to C if colored paver blocks are used

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand ) including making joints with without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete including painting etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin- charge).

Providing and fixing of Reinforced Ferro cement Drain cover designed for class "AA" loading duly marked on cover with adequate steel reinforcement having thickness 75 mm to 150 mm anti- corrosive bitumen painted M.S. plate Rim and on M.S. lifting hooks admixture like plasticizer bond improving compound shrinkage resistance compound abrasion resistant complete as per approved design etcfor drain Opeining Size 701 to 1200 mm Standard Drain Cover Size 1500mm x 600mm x 125mm

Supply& fixing of Fiber reinforced Ferro cement drain cover (light duty) designed for side drain for class "B"Road loading duly marke don coverwithadequatesteel reinforcement having thickness 50 mm to 75 mm anti corrosive bitumen paintedM.S. plate Rimandon M.S. lifting hook sad ditives & admixture like plasticizer shrinkage resistance compound abrasion resistantas per approved drawing and design complete in all respect. fordrain Opeining Size451 to700mm Standard Drain Cover Size 1000mm x 900mm x 60mm

P &F1st quality Heavy Duty Vitrified Double Charged tiles on parking floor, in 600x600 mm tile sizes (thickness minimum 20 mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment

Supplying and fixing Jodhpur machine cut stone Kadau in CM 1:4 with rock facing with proper projection and machine cut edges of stone, two line dressing of building corners, jambs etc. including uniform joints using aluminium square section of size 12 mm to 15 mm as per requirement of course and width of stone not less than 12 Cm., with reqisite number 29cm (11.5") height

Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases in stone and holes in walls wherever required.

Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floorsetc. laidon 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2marble dust) with pigment tomatch the shade of themarble slab including grinding, rubbing and polishing complete. Rajasthan Black Above 3601 Cm2 Slabs

Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work( Full Edge moulding )

Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineerin-charge.

Red sand stone slab 30 mmthick (un-dressed)

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 12mm thick .

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats)

Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat including scaffolding and safety provision Roller Finish av. thickness 400 to 500 microns.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

RIGID PVC PIPE - P&F rigid PVC Pipe (IS:4985mark) class II/ (4Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia

Refixing Ss Railing : The labor cost for fabrication and installation of an SS railing

Supply, CNC laser cutting, fabrication and fixing of 5mm thick MS sheet CNC jali screen as per approved CAD design, including deburring, primer coat, spray paint finish (primer + 2 coats), with MS frame (if required), fasteners/welding, erection at site in true alignment, all hardware, leads and lifts complete

Supply and fixing of UV-stabilized artificial grass carpet (PE/PP fibers with drainage holes) as per approved sample, including jointing with seam tape and adhesive, trimming, cutting and wrinkle-free installation over prepared base, all leads, lifts and fixing materials complete

Providing and fixing Stone jali 50mm thick Red/Pink sand stone as per ornamental design to fixed with white cement/epoxy mortar including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade. Including CNC Cutting . complete as per design approved by Engineer-in-Charge.

Extra for providing projection moulding /border to 200-250 mm wide thick stone Kadau . including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead.

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: In cement mortar.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix.

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer in charge : In cement mortar.

Labour charges for refixing of Interlocking Block pavement i/c cost of bedding sand & water

STATUE Design to Create a detailed design for the statue of Weavers hand in height width (6000x4500mm) as per proportion, including the pedestal and foundation. Fabricate the statue using gunmetal material. Install the statue on a reinforced concrete (RCC) foundation with vertical support structure. Obtain structural approval from IIT or NIT before starting the project. Work should be executed in appearance as shown in picture after the approval of engineer incharge, mock up should be prepared and submitted before placing it. Mock-up: Prepare a 4'-6" height mock-up of the statue for client approval. Ensure the gunmetal material is suitable for outdoor exposure and can withstand environmental conditions. The RCC support structure and foundation must be designed to withstand wind, seismic, and other loads. Ensure the installation process is safe for workers and the surrounding area. Obtain approval from the client at each stage of the project.

Design to Create a detailed design for the statue of rana punja in height 3Mt width as per proportion, including the pedestal and foundation. Fabricate the statue using gunmetal material. Install the statue on a reinforced concrete (RCC) foundation with vertical support structure. Obtain structural approval from IIT or NIT before starting the project. Work should be executed in appearance as shown in picture after the approval of engineer incharge, mock up should be prepared and submitted before placing it. Mock-up: Prepare a 4'-6" height mock-up of the statue for client approval. Ensure the gunmetal material is suitable for outdoor exposure and can withstand environmental conditions. The RCC support structure and foundation must be designed to withstand wind, seismic, and other loads. Ensure the installation process is safe for workers and the surrounding area. Obtain approval from the client at each stage of the project.

DUST BIN Supply and installation of pole-mounted dual dustbin unit (HDPE/PP UV-stabilized bins of 80+80 Ltr capacity) with GI/MS pole or clamps fixing on existing pole, lids, locking system, waste segregation labeling, hardware, grouting/erection (if new pole), all leads & lifts complete

Retro-reflectorised Traffic Signs Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mmx450mmx600mm, 600mm below ground level as per drawings and MoRTH Specification Clause 801

900 mm equilateral triangle

600 mm equilateral triangle

600 mm circular

800 mm x 600 mm rectangular

600 mm x 450 mm rectangular

600 mm x 600 mm square

900 mm side octagon

Direction and Place Identification signs upto 0.9 sqm size board Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1. fixed over aluminium sheeting, 2mm thick with are a not exceeding 0.9 sqm supported on a mild steel single angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450x450x600mm,600mm below ground level as per approved drawing and MoRTH Specification Clause801. Direction and Place Identification signs upto 0.9 sqm size board

Painting lines, Dashes, Arrows, etc. on Roads in Two Coats on Old Work Painting lines, dashes, arrows, etc. on roads in two coats on old work with ready mixed road marking paint conforming to IS: 164 on bituminous/concrete surface,including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and MoRTH specification Clause 803

Kilometre stone Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MoRTH Specification Clause 801

LANDSCAPE Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300-1 and 300-2 with a lead upto 50m as per MoRTH Specification Clause 305.3

Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. Good soil of earth

Supply of dry manure including loading unloading,transportation & stacking at site. Farm yard manure(organic)

Hedges of various varieties Golden durantain P.B(5”X6”) - 6”-1’

Laying of lawns including ploughing leveling breaking of clods manuring and removal of stones etc. (cost of manure or extra good earth to be paid separately )maintenance of lawn foe 30 days or more till the grass forms a thick lawns free from weeds and fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost in rows 5 cm apart in either direction

Supply of different varities of tree/shrubs/climbers according to height and age of the plant at side including loading/unloading & transportation etc.complete

Different flowering plants 900mm to1500mm

Different varieties of shrubs 600mm to 900 mm

Supply of different varieties of bougainvillea in ply bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. complete Local variety of bougainvillea 600mm to 900mm

Different varieties of Shady plants

Height 5’-6’ (14”x14”) Many Branches

Height 7’-8’ (18”x18”)Many Branches state steam

Helper (Maali)

LIGHTING Supply, Installation, Testing & Commissioning of 1000 mm length X 46.5 mm Width X 75mm Height of 3000K Linear Wall Washer with Integral driver & completely made in India luminaire. Luminaire must use Single LED of Chip and shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has IP66 & IK06 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥70 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 40W and shall deliver 4400 lumens. Fixture shall operating temperature range of 0°C to 45°C.Input Voltage Range of 140-270V AC. The luminaire shall have declared life of 50,000 burning hours at L70.Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make.

SITC of 500 mm length X 80mm Width X 115mm Height (3000K) Linear Wall Washer with Non-integral driver & completely made in India luminaire. The luminaire’s shall be made of Extruded aluminum housing powder coated in grey. The complete luminaire has IP66 & IK07 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 & shall have SDCM≤5. The luminaire shall have wattage 12W and shall deliver 660 lumens. Beam angle of the Luminaire shall be 11/15 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC. The luminaire shall have declared life of 50,000 burning hours at L70.Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make.

SITC of 495mm Length X 155 mm Width X 190mm Height 3000K Rectangular Flood Light with Non-integral driver & completely made in India luminaire. The luminaire’s shall be made of die cast aluminum housing powder coated in grey. The complete luminaire has IP66 & IK08 protection and it comprises of high purity integrated poly carbonate Lens.The LEDs shall have minimum CRI ≥80 (White LED) & shall have SDCM≤5. The luminaire shall have wattage 120W and shall deliver 6600 lumens. Beam angle of the Luminaire shall be 15/30/60 deg .Fixture shall operating temperature range of 0°C to 45°C. Input Voltage Range of 24V DC. The luminaire shall have declared life of 50,000 burning hours at L70.Luminaire and Driver must be made in India with same brand. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer along with technical bid. LM80 , RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire. Brand name shall be embossed / engraded on each an every light fixtures. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make.

SITC of LED Post Top of dia: Ø329mm made of Aluminum pressure die cast housing in Pure Polyster UV resistant powder coated black finish and UV coated acrylic/opal diffuser material with a system lumen output of 3150 lumens and a minimum system efficacy of >90 lm/W. The luminaire shall have a rated system lifetime of >50,000 burning hours at L70. The luminaire should have a color temperature of 4000K and CRI > 70. The luminaire shall meet IP65 and IK04 with THD ≤ 10% at full load and PF > 0.95. The total power consumption should not exceed 35W (including driver). Surge Protection of 4KV is provided. The driver and fixture should be BIS approved. The fixture should comply with the parameters as per IS 10322 Part 5 / Sec 1 : 1987. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Dimension: Ø329 X 405mm.

SITC of Isolated, constant Voltage type 240 W LED Driver enclosure in Extruded Aluminium metal enclosure . Driver shall be made in India compatible for RGBW luminaires with silicone potted and IP66 Protected of same make as luminaire. Output voltage of the driver 24Vdc. Driver efficiency should be greater than 85% at full load, THD < 10%, PF > 0.95 with Under and Over Voltage Cutoff Protection and 440V withstand for 8 hours minimum & sould have large operating input voltage range of 140V to 300V AC(nominal rated voltage – 240V) with 5KV internal surge protection. LED driver shall have inbuilt output short circuit, over voltage protection, Thermal Shutdown protection.

SITC of PVC insulated multi core electrical un armoured flexible 3C x 1.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V. (As per actuals depending upon the site condition)

SITC of PVC insulated multi core electrical un armoured flexible 3C x 2.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V. (As per actuals depending upon the site condition)

SITC of PVC insulated multi core electrical armored flexible 4C x 2.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands aluminium conductors and it supports voltage grade up to 1100V. (As per actuals depending upon the site condition)

P / L of Double wall corrugated HDPE pipe confirming to IS : 16205 P-24, Stiffness Class 750 N, Externally corrugated and having smooth surface inside with HDPE Coupler, Elbow, Tee at required Depth below the ground for laying cable of following Nominal Outer dia. MFR Test report from NABL accrediated is to be submitted.(Excavation of Earth & Back filling with compaction is to be Paid Extra)All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 50mm

SITC of IP65 "I" power connectors having 3/4 pole cable connector, chuck type strain relief, Current rating 20 A rms continuous, Easy and extremely precise locking system "Quick Lock" High impact materials - long-lasting and reliable

SITC of Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Timer with required contactor for auto switching. Power panel suitable for indoor/outdoor applicable and floor mount / wall mount options. - 9 Nos of 6/10A SP Outgoing MCB's. - 1No of 16A TPN Incoming MCB.

SITC of IP driver box made up of PVC / UPVC and ivory connectors for the internal terminations and external outgoing connecting points, fiber / brass glands of suitable size fitted MCB control for outgoing circuits.

Providing earthing with galvanised iron earth plate, Earthing pipe, GI earthing wire, complete with all materials, testing and recording.

SITC and fixing of PVC conduit pipe on surface 25 mm Dia (Medium) with accessories, junction box etc. including clamping etc

Earth Excavation Work for cable laying.

Rewiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick MS box with earth terminal, 6 A switch, 3 pin ceiling rose/holder / 3 way connector , 3.0 mm thick ISI marked (IS:2036-1995) phenolic laminated sheet, Al.alloy / Cadmium plated iron/ brass screws, cup washers, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Please Enable Macros to View BoQ information